Construction of Warehouse 1000 MT and Factory Building 527.20 Sq. Mtr.

Amount

Excavation for foundation in earth, soil of all types. sand, gravel and soft munum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m) By Mechanical Means, SSR LNO. 21.02 @ 207.00 Per Cum

Excavation for foundation in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed. dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means SSR INO. 21.04 @258.00 Per Cum

Providing dry trap! grantel quartzitel gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc., complete. SSR INO. 21.38 @ 1382.00 Per Cum

Fling in plinth and floors with contractors material/brought from outside and approved by Engineer Inchange in layers of 15 on to 20 cm including watering and compaction etc. complete. SSR LNO. 21.37 @ 500.00 Per Cum

Providing and laying Cast in shaReady Mix cement concrete in M-10 of trap/ granted quartzite gneiss metal for foundation and bedding including bating out water. Steel centering formwork, layingbumping compacting roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixericoncrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR INO 24.01 @ 5830.00 Per Cum

Providing and laying in situ Ready Mix cement concrete M-20 of trap / granite /quartzitel gneiss metal for RCC work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including baling out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR INO. 25.11 @7104.00 Per Cum

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening it special finish is to be provided and curing etc. complete (Excluding reinforcement and structural steel with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mbrer concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR LNO. 25.31 @ 13783.00 Per Cum

Providing and laying Cast insiti Ready Mix cement concrete M-20 of trap granite/quartzitel gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering. formwork, cover blocks, laying/pumping. compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR INO. 25.5 @ 12260.00 Per Cum

Providing and laying Cast insitu Ready Mixcement concrete M-20 of trap/ grantel quartzite/ gneiss metal for RC.C. chaja as per detailed design and drawings including steel centering, formwork, cover blocks, Saying pumping, compacting and roughening the surface f special finish is to be provided and curing complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete With fine aggregate (Crushed sand VSI Grade). SSR INO. 26.05 @ 13932.00 Per Cum

Providing and fixing in position TMT FE 500 bar reinforcement of various diameters for RCC pile caps. footings. foundations, slabs, beams columns, canopies, staircase. newels, chajjas, intels pardis, copings, fins, arches etc as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR INO. 25.33 @ 89703.00 Per Mt

Providing and faxing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations. slabs, beams columns, canopies, staircase, newels. chajjas, Iintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. Including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR LNO. 26.34 @ 94135.00 Per Mt

Providing second class Burnt Brick masonry with conventional LS. type bricks in cement mortar 1:6 in plinth as backing in composite masonry including balling out water manually, striking joints, raking out joints and watering etc Complete. SSR LNO. 27.03 @7514.00 Per Cum

Providing second class Burnt Brick masonry with conventional 15. type bricks in cement mortar 1.6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. SSR LNO 27.05 @ 7994.00 Cum

Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq mt. total on each side) profiled sheets for roofing The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), H strength steel with min 550 MPa yield strength, metallic hot dp coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with Inorganic pigment. The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profie sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep rbs with subtle square fluting in the five pan at nominal 180- 250 mm center-to-center. The end rb shall be designed for ans-capillary groove and return leg. The feed material should have coll manufacturers product details marked a regular interval, Including fasteners with min fastened with min 25 um Zinc- Tin alloy coated, Hex head, self-drilling screw etc. complete (weight of profe 4.52 Kilogram One Square Metre) SSR INO 3834 G 1173.00 Fer Som

Providing internal cement plaster 12mm thick in single coat in cement mortar 14 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR INO. 22.04 @ 278.00 Per Sqm

Providing internal cement plaster 20mm thick in Single coats in cement mortar 14 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. SSR NO. 32.07 @ 382.00 Per Sqm

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting foxing in position, Making riveted/ boted welded connection and one coat of anticorrosive paint and over it 2 coats of of painting approved quality and shade etc. complete. SSR LNO 23.04 G 119459.00 Per Mt

Providing and faxing mid steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of ol painting complete SSR INO. 40.01 @ 2007.00 Per Sqm

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding preparing the surface. (excluding the primer coat)etc. complete. SSR LNO. 38.12 80.00 Per Sqm

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding necessary preparing surface by thoroughly cleaning of grease, dit and other materials as required, etc complete SSRINO, 35.24 @ 163.00 PER SQM

Providing and fuing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices Including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (1.5 62481979) (Without mechanical gear). SSR INO. 39.24 @4829.00 Per Sqm

Providing and faing screw down 15 mm dia wheeled stop tap of brass including necessary sockets/union nut complete SSR INO. 41.43 @15.00 Per No

Providing and fixing in position (as per 1868/1982) Aluminium sliding window of three tracks with rectangular peace 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre with window frame bottom track section 92 x 31.75 x 130 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92

Providing and fixing on wals/beling/floor 20 mm dia CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR LNO. 42.55 @310.00 Per Rmt

Providing and foing HDP container one piece moulded water tank made out of high density polythyler and bult corrugated inclusive of delivery up to destination holsting and fixing of accessories such as inlet outlet overflow pipe inclusive of a tanks capacity between 200 to 1000 iters SSR (NO. 42.53 @ 14.00 Per Lit

Turbo Ventilator 24: Providing and fixing wind operated tubo ventilator systems of various sizes over the existing root inclusing cutting CGI sheets, proper foding in position to trus Ine and level with all fatures and fastenings incuding etc. complete. SSR INo. 42 on P.No. 5299702.00 Per No

Road Work: Providing soling using 80 mm size trap metal in 15 cm layer including fling voids with Crushed sandignit ramming, watering etc. complete SSR INO 2141454.00 Per Cum

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. SSR IND 2.29a @435.00 Per Cum

Spreading hard murum soft murum/ gravel or kankar for side width complete SSR INO. 2.30 @ 79.00 Per Cum

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. SSR LNO. 2.31 @21.00 Per Sqm

Providing and laying Cast in situ Ready Mix cement concrete in M-10 of trap/ granite quartzite gneiss metal for foundation and bedding including balling out water. Steel centering, formwork, laying/pumping, compacting roughening them if special finish is to be provided, finishing required and curing complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer concrete Batch mix plant (Pan mixer) etc. complete With fine aggregate (Crushed sand VSI Grade). SSR LNO 24.01 5830.00 Per Cum

Providing and laying in situ / ready mix M20 CC of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic microprocessor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine aggregates of required specifications (VSI sand finely washed etc) SSR I.NO. 6538.00 Per Cum

Electrification: Supplying and erecting mains with 3 x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW. Item No. 1-3-6, Page No. 5, PWD Electrical CSR 2022-23.

Supplying and erecting LED Panel Light (600mm X 600mm) Max. 30 having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. Item No. 2-1-7, Page No. 24, PWD Electrical CSR 2022-23.

Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW. Item No. 1-7-1, Page No. 11, PWD Electrical CSR 2022-23.

Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75 m) length respectively and total 8.0 m long with pole cap, base plate in provided foundation. (weight 101 kg) as per specification no. OH- PL/STP. Item No. 8-1-1, Page No. 146, PWD Electrical CSR 2022-23.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP. Item No. 9-1-1, Page No. 160, PWD Electrical CSR 2022-23.

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP. Item No. 9-1-4, Page No. 160, PWD Electrical CSR 2022-23.

Supplying, erecting & marking DP-MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB. Item No. 5-3-6, Page No. 90, PWD Electrical CSR 2022-23.

Supplying, erecting & marking DP-MCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR / MCB. Item No. 5-3-7, Page No. 90, PWD Electrical CSR 2022-23.

Supplying and erecting GI sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. Item No. 6-1-6, Page No. 106, PWD Electrical CSR 2022-23.

Supplying and erecting marine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete with compliance to IS 720:2010. Item No. 6-1-14, Page No. 107, PWD Electrical CSR 2022-23.

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG PW/CW. Item No. 1-7-26, Page No. 13, PWD Electrical CSR 2022-23.

Supplying and erecting regular/ standard model ceiling fan of 1400mm. Sweep complete erected in position as per specification no. FG-FN/CF Item No. 2-10-2, Page No. 35, PWD Electrical CSR 2022-23.

Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board. Item No. 5-3-14, Page No. 90, PWD Electrical CSR 2022-23.

Supplying, installing, testing and commissioning of single phase, 230V, 50 Hz, 2500 VA digital pure sine wave inverter with backup time of ........ hrs. based on Insulated Gate Bipolar Transistor (IGBT) technology complete as per specification no. AP-INV. Item No. 3-6-4, Page No. 50, PWD Electrical CSR 2022-23.

Supplying and erecting 12V/200Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete. Item No. 3-8-6, Page No. 51, PWD Electrical CSR 2022-23.

Supplying and erecting 12V/200Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete. Item No. 3-8-6, Page No. 51, PWD Electrical CSR 2022-23.

Royalty: Sand

Without Sand

Testing: BASIC TEST OF CEMENT: tandard Consistancy, Fineness, Specific Gravity, Seting Time (Initial & Final), Compressive Strength, Soundness. SSRI NO. 1PNO 426 3770.00 Per Test

BASIC TEST OF AGGREGATE: Water Absorption, Specific Gravity Impact Value, Crushing Valve SSR IND 2PNO 426 @ 2600.00 Per Test

BRICKS: Water Absorption et ef 5 Bricks), Compressive Streng Set of 5 Bricks), Efflorescence (Set of 5 Bricks) SSR LNO. 13 PNO 426 @2175.00 Per Test

CONCRETE: Compressive Strength OF CC. Cube (Set of 3 cubes). SSR NO. 19 P.NO 420 @ 690.00 Par Test

Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code of Conduct

Wonder Construction

MANGESH ENTERPRSES JALNA