Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC 93 BAPUJI NAGAR ITC ROAD SAHARANPUR 247001 UP | SAHARANPUR | UTTAR PRADESH | 247001 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹31.4 L+₹1.1 L (3.57%)Rejected-Finance D 502 SHIVILOK COLONY RAIPUR ROAD DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L2 | Rejected-Finance Rejected being not L1 | |
| 3 | L3₹31.9 L+₹1.5 L (5.00%)Rejected-Finance | L3 | Rejected-Finance Rejected being not L1 | |
| 4 | L4₹32.9 L+₹2.6 L (8.47%)Rejected-Finance VILL BHANGERI PO ROORKEE PIN 247667 | HARIDWAR | UTTARAKHAND | 247667 | L4 | Rejected-Finance Rejected being not L1 | |
| 5 | L5₹35.7 L+₹5.4 L (17.7%)Rejected-Finance 264 2 GALI NO 7 RAM NAGAR ROORKEE DIST HARIDWAR UK | L5 | Rejected-Finance Rejected being not L1 |
Tender Value
₹44.3 L
EMD Value
₹88,500
Closing Date
6 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MES) ROORKEE
Garrison Engineer Roorkee
SPL REPAIR OF OFFRS MD ACCN NO 693/3 AND 694/2 OASIS APARTMENT ZONE C AT ROORKEE AND CERTAIN MINOR WORKS AT ROORKEE AND SAHARANPUR UNDER GE ROORKEE
2024_MES_636629_1
8392/345/E8
Open Tender
Civil Works
Item Rate
180 days
Roorkee
As per tender documents
8 documents required · 8 mandatory
₹500
GE (MES) ROORKEE
₹88,500
Yes
11 Mar 2024
9 Jan 2024
8 Feb 2024
9 Jan 2024
6 Feb 2024
23 Jan 2024
Amount
Dismantling asbestos cement corrugated ,semi corrugated, ridge etc sheets in roof covering complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.
Dismantling of wrought Iron or mild steel work of any description not otherwise provided for such as wind ties, valley gutter, supports steel windows, door etc complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frame) n exc 1.5 Sqm each incl taking out of holdfast by making necessary Cutting holes and making good using PCC 1:2:4 TYPE B1 and finishing etc complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but not exc 4.00 sqm each incl taking out of holdfast by making necessary Cutting holes and making good using PCC 1:2:4 TYPE B1 and finishing etc complete all as specified and directed.
Taking down old cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc rubbish off premises complete all as specified and directed.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brick work with old size sub class 'B' bricks , straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.
M&L Rendering 15 mm thick in CM 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) complete all as specified and directed.
M & L for rendering 12 mm thick on wall in CM 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 5 mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement) complete all as specified and directed.
M & L for granite 20 mm thick (table rubbed and polished) in cooking platforms and laid over cement screed mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding of front side if required at site complete all as specified and directed.
M&L for Virified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
S&F vitrified ceramic tiles coloured 10mm thick (square/ rectangular) polished, light shade, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in as in vertical surface like dado/ skirting etc including 15mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15 mm thick screed bed in CM 1:6 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr - in - charge.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete as specified and directed by Engr-in-Charge
M&L for factory made 35mm thick 100% solid WPC window glazed shutter and Gauzed shutter 95x35mm thick. Made from WPC matrial with density not less than 800 kg/cum. All four corner are fusion welded & screwed with 8x50mm self-screws for additional stregth, after joining all four corner clear space to be paneled with 5mm thick glass / Stainless steel wire mesh after glazing of inside of shutter 10 x 12mm pvc "L" shape bead to be nailed or sticked with shutter. Provided 2 Nos SS hinges of 100mm, 02 Nos aluminium handle of 125mm, 02 Nos aluminium tower bolt of 125mm and 01 peg stay for each shutter (Glazed and Gauzed) incl factory made 100% solid WPC window frame 125mm x 65mm double rebated frame & mullion 125 x 80mm, made from WPC (Single extruded process) material comparising of virgin PVC polymer of K value 57-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic addihives fabricated with meter joints after applying PVC solvent cement & screwed with fully body treated star headed screws having minimum frame densty not less than 800 kg/cum, having good screw holding capacity (screw withdrawal strength of min 900N). Minimum compressive strenght of 58 N/mm2. Modulus of elasticity 900 N/mm2 and resstance to spread of flame of class A category with properity of being termite/ borer proof, water / mosquito proof & fire retardant & fixed in position with fasteners / hold fast of required size. Window shall be provided with MS Grill/Guard Bars made of 10mm MS square bar welded to 6 x 12mm MS flat including painting with countersunk holes at both vertical ends, gap between the bars should not be more than 125mm. All as per specification drawing as directed by Engr-in-charge. Note :- (i) The rate include all WPC Window frame, Glazed and Gauzed shutter including 5mm thick Glass and wire mesh, aluminium hardware, MS Grill all are deemed in this quoted rate no extra payment to be paid.
S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 60 x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.
All as per item No 20 above but size of frame 60x105mm complete.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.
M & L providing 30 mm thick factory made solid WPC (wood plastic composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texteure, incl S S wire mesh shall be fixed with 15 x15 mm square tube in side rails with screwing 8 x 28 heat metal zink coated screw can be remove or fix again after changing of wire mesh when needed. The density of the shall be as per manufacture instruction compete all as specified and directed. (Note: The rates deemed to include for SS wire mesh no extra payment shall be paid.)
S&F FRP door frames three legged of cross section 90x45mm having single rebate 32mmx15mm. The laminated door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminated shall be 2mm thick, frame shall be covered with fiber glass from all sides MS flat iron 25x3mm shall be provided at the bottom to steady the frame including PCC 1:2:4 Ty B0 using 12.5mm graded stone aggregate as in frame, complete all as specified and directed.
S&F Fiber glass reinforced plastic (FRP) Flush door in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameter of FRP, laminate confirming to table 3 of IS -14856 Complete all as specified by the manufacturer and as per direction of Engineer -in- charge.
S&F 100 mm long (size) butt hinges ISI marked, stainless steel AISI 304 grade with brass/bronze hinge pin, complete all as specified and directed.
S&F for 100mm size mild steel butt hinge medium ISI marked weight complete all as specified and directed.
S&F for 150mm long aluminium ISI marked, anodized, barrel tower bolts of extruded section complete all as specified and directed.
S & F 150mm aluminium handles ISI marked, cast type, anodised complete all as specified and directed.
S&F 300mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed.
S&F for 300mm mild steel ordinary rat tail pattern springs incl roller plate complete all as specified and directed.
S&F floor door stopper of aluminium alloy body & tongue of size140mm, anodised with hard drawn spring,fixed in door, complete all as specified and directed.
S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed by wooden beads or fixed in steel windows by screws complete all as specified and directed.
S&F in repair Curtain rod Stainless steel fancy type curtain rod 20 mm dia incl Brackets and knobs complete all as specified and directed.
S&F in repair stainless steel peg set of six complete all as specified and directed.
M&L for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm th with pressed steel shutter 1mm th Godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including MS hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer on all around on steel surface of frame & shutter both sides including locking arrangement and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and directed.
S & F 18 mm thick with min density 600 Kg / Cum LEAD FREE plywood of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.
S & F 18 mm thick with min density 600 Kg / cum LEAD FREE plywood of single side rigid laminate of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed.
M&L for 18 mm thick Multi layer waterproof plywood (Make-Dura/Century or equivalent fixed with screws to timber frame work for cabinet car case both sides covered with o.80mm thick decorative laminates, "Mica" type 1 of surface finished , colour and pattern as approved fixed with approved adhesive as per makers instructions complete all as specified & directed.
S&F Auto hinges for cabinet case
S&F 0.8mm thick laminated sheet (Mica) paste on board/plywood with glue complete all as specified and directed.
S&F 100 mm size stainless steel bright finish handle for cabinet shutter complete all as specified and directed.
Taking up or down Steel Tubing 15mm bore (dia) and connections complete all as specified and directed.
Taking up or down Steel Tubing 20mm bore (dia) and connections complete all as specified and directed.
M&L 15mm dia bore steel tubing medium ISI marked grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
M&L 20mm dia bore steel tubing medium grade ISI marked galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repair 15mm bore fancy type CP brass one way or two way Bib Cock (Foam Flow) with Flange (as approved) complete all as specifed and directed (Make : Prayag Cat No 7306 or EQUIVALENT ). .
S&F in repair 15mm bore Single Lever Basin Mixer without popup waste with 450mm long Braided Hoses (as approved) complete all as specifed and directed Make: Prayag Cat No 7350/Jaquar/Kerovit (Kajaria) or equivalent
S&F in repair 15mm bore Stop valves / angle valves fancy type, chromium plated with long shank and cup (concealed type) , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete as directed Make: Prayag Cat No 7318/Jaquar/Kerovit (Kajaria) or equivalent
S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed (as approved) complete all as specified and directed.
S&F in repair 15mm bore Wall Mixer 3-in-1 with provision for both Over Head Shower with Hand Shower with 115mm long bend Pipe (as approved) complete all as specifed and directed (Make Jaquar Florentine FLR-CHR-5273 UPR, Pearl GPR-884, CERA-F1017401 or equivalent).
S&F in repair 15mm bore Sink Cock with Swivel Casted Spout (Wall mounted) (as approved) complete all as specifed and directed.
S&F in repair Chromium plated shower roses with swivel joints, 125x125mm with CP arms, including fixing to steel pipe or union complete all as specified and directed.
S&F Stainless steel towel Rack with Lower Hanger complete all as specifed and directed.
S & F in repair tubular towel rail , chromium plated brass 20mm dia ‘D’ type 60 cm long between flanges complete all as specified and directed.
S & F in repair 15mm bore CP brass health faucet with 1 mtr long long easy flex tube in chrom finish & wall hook (as approved) complete all as specifed and directed.
S & F in repair PVC connection, heavy duty 15 mm bore, 45 cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed.
S & F in repair new flxible PVC waste pipe of 32 mm bore of 750mm / adequate length including one PVC reducer 32mm complete all as specified and directed.
S&F Coloured PVC Cabinet of size 450mm x300mm x 90mm with Looking Mirror (as approved) fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed.
S & F in repairs 600mm x 450mm size looking mirror 5 mm thick with 6mm thick ply wood back sheet and fixed with Stainless steel screw at corner and washers complete all as specified and directed.
S&F in repair, Sheet Glass Shelf/corner Assembly, consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and directed.
S&F in repair Jaquar or equivalent make Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repair Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe and Making Good to Floor/distrubed surfaces complete all as specified and directed.
S&F in repair, White Plastic Water Closet Seat Cover for Water Closet Pan (Pedestal Pattern), Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device, complete all as specified and directed.
S&F in repair Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces complete all as specified and directed.
S&F in repairs PVC Flushing Cistern 10 LITRE capacity White, Low Level, Valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed.
S&F in repairs Vitreous China Wash Hand Basin of size 550x400mm (Flat Back or Angle Back type) with pedestal including 32mm bore (dia) Brass CP Waste Fitting, a pair of Cast Iron Bracket duly painted including cutting and pinning in Ends Making Good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and directed.
S&F in repair, Stainless Steel Sink with Drainage Board l.0mm thick Over-all size 915mm x 460mm and Bowl size 410mm x 330mm x 160mm for Kitchen with Plugs, Washers, Waste Fitting 32mm bore of Brass CP, a Pair of Cast Iron Brackets duly Painted including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and directed.
S&F in repair, Stainless Steel Kitchen Rack of size 750mm x 800mm x 200mm not less than 0.63mm thick with Mild Steel Brackets and fixed to Wooden Plugs with CP Brass Screws and Cup Washers complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting and reconnecting and re-fixing in position including Cleaning repairing, etc.complete all as specified and directed.
S & F in repair rotational moulded polythylene, triple layer water storage tank 1000 litre capacity (cylinderical vertical with closed top,) hoisted & fixed in position all as specified in SSR Part-I and 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms) complete, including dismantling existing water storage tank and removal from site complete.
S&F in repairs PTMT Grating Doom 125mm dia (minimum weight 40 Grams) complete all as specified and directed.
S&F in repair PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Singe Socketed, in any length with Rubber Ring Joints fixed to Walls wit FI clamps made out of 50mm x 3mm complete all as specified and directed.
S&F in repair PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Singe Socketed, in any length with Rubber Ring Joints fixed to Walls wit FI clamps made out of 50mm x 3mm complete all as specified and directed.
S&F in repair PVC (SWR) 75mm bore (dia), Bend any type, provided with Access Door, etc. and jointing with Solvent Cement complete all as specified and directed.
S&F in repair PVC (SWR) 110mm bore (dia), Bend any type, provided with Access Door, etc. and jointing with Solvent Cement complete all as specified and directed.
S&F in repair PVC (SWR) 75mm bore (dia), Junction Single (Single T) Equal or Unequal with Access Door, etc. jointing with Solvent Cement complete all as specified and directed.
S&F in repair PVC (SWR) 110mm bore (dia), Junction Single (Single T) Equal or Unequal with Access Door, etc. jointing with Solvent Cement complete all as specified and directed.
S&F in repair for PVC (SWR) Gully Trap 125/110mm,setting and jointed with Solvent Cement, including Brick masonry chamber in CM 1:4 finished with plaster in CM 1:3 complete all as specified and directed.
Dismantling of Brick tiles or terracing tiles, single layer on roofs, kerbs, aprons, etc. (each layer) and removal of rubbish out of defence land complete all as specified and directed. (Note : All roots of plant on either on wall or roof to be removed and making good the disturbed surfaces. The rate quoted by the contractor shall be deemed to be included in the unit rates.)
Demolition of Mud Phuska in roofs,any thickness including plastering and leeping of any thickness upto 30cm deep complete all as specified and directed.(Note: All roots of plant on either on wall or roof to be removed and making good the distributed surfaces. The rate quoted by the contractor shall be deemed to be included in the unit rates including removal of mud phuska outside defence land.)
Taking down old existing water proofing treatment from the top of RCC / arch slab, including taking down exsiting PCC padding ,or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified and directed
Material and labour for 20mm thick cement paster in CM 1:4 mixed with WPC @ 2% by weight of cement finished even and smooth withour using extra cement on roof surface and wall (WPC will be measured and paid seperately as supply only rate)
Material & labour for preparing new plastered roof surfdace and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions over, complete all as specified & directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L Cement concrete type B1-1:2:4 (using 20 mm graded crushed stone agg) in roof kerbs or mud stop rounded or chamfered on edge etc complete all as specified and directed
M&L for 40mm thick brick tiles laid on cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed.
M&L for pavement ceramic tile (min size 300 x 300 mm) and 8 to 10 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over 15mm thick rendering in CM 1:4 on 25 mm thick PCC 1:2:4 Type B-0 using 12.50mm graded stone agg,complete all as specified and directed.
M & L for 16-18 mm thick mirror polished Machine cut kota single piece stone slab of size 22''x22'' for flooring over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L kota stone mirror polished slab with uniform texture of 16-18 mm thick in trade and steps (to be flushed and provided with three Nos of grooves at the end on each step), riser of steps, skirting, dado and pillars in one single piece (size directed by Engineer-in-Charge) laid over and including cement screed 10mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , bevelled edge of corner etc complete all as specified and directed.
M&L for preparation of old decorated surface of external walls by complete removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over 1mm thick wall care putty and a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint complete all as specified and directed. Note : 2.5% of cost of item will be retained as guarantee money for external painting and will be released after satisfactory completion of 3 years warranty.
M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper using roller over 1mm thick wall care putty all as specified and prescribed by manufacturer of paint Ist Quality complete all as specified and directed.
M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint by using Roller (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty), a coat of exterior water based, over 1mm thick wall care putty primer of same make all as specified and prescribed by manufacture of paint complete all as specified and directed. Note: 2.5% of cost of item will be retained as guarantee money for external painting and will be released after satisfactory completion of 3 years warranty.
M&L for preparation of new surface of internal wall by reputed paint manufacturers and applying two coats of acrylic distemper over one coat of 1mm thick wall putty using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge . Note for item No 92 to 95:- (i) The surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction to the satisfaction of Engineer in Charge before application of surface treatment. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE before application of surface treatment (v). The colour / shade will be all as approved by GE
M&L for preparation of newly plastered surface of ceiling and applying two coat of white wash complete all as specified and directed.
M&L for preparation of old surface of ceiling plastered or unplastered including cornices and pillasters etc and applying one coat of white wash on ceiling complete all as specified and directed.
M&L for Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar work at any position & height by dismantling loose/disintegrated portion and dubbing out with cement concrete 1:1.5:3, 40mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel 'U' clamps made out of 8mm dia @ 150 c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with Mild steel chicken wire mesh including form work where ever required and finished with 15mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surface to receive finishes complete all as specified and directed.
M&L for repair to RCC chajja (irrespective size) by cleaning, replastering in cement mortar 1:3 mixed with integral water proofing compound over 40mm thick( average ) PCC padding in CM 1:2:4 Type B-O (mixed with water proofing compound) to a required gradient or slope as directed by Engr-in-Charge and the plaster will extended upto 300mm on wall/roof surface to avoid leakage/seepage. Junction of old and new plaster will be well bonded with application of water proofing compound. Drip course or groove of siae 25mm x 4mm will be provided at the edge of bottom surface of the chajja. (Note:- Rates for cement plaster, WPC, PCC and formwork and specilist labours etc required for full completion of item shall be deemed to be included in the rates quoted against this item of BOQ by the contractor).
M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in hardstanding, Plinth protection, path etc 75 mm thick finished even and smooth without using extra cement complete with Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green all as specified and directed.
M & L for preparation of old / new surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M & L for preparation of old / new steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
Excavating in post holes in soft/loose soil each n exc 0.5 cum, getting out, and returning filling in and ramming with concrete around, and removing surplus soil to a distance n exc 50 m complete all as specified and directed.
M&L PCC 1:3:6 type C-2 using 40 mm grade stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping and around MS post above GL and wall of trough including necessary form work complete all as specified and directed.
M&L MS works as in Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work confirming to Fe 290 Gde E-165; complete all as specified & as directed.
Fixing only New/Old chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified & as directed.
Supply only chain link MS Galvanised fencing, any size or type complete all as specified & as directed. Note: Weight of chain link fence shall not exceed 3.0 Kg per Sqm and shall be got approved from Accepting officer before incorporation in the work.
S&F Mild & steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,n.exc. 5 cm and 5 to 10 mm dia complete all as specified & as directed.
M&L mild steel round bars 10 mm dia as in stiffener for straightening chain link fencing complete all as specified and directed
M&L preparation of new steel surfaces and applying two coat soft synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Excavation in trenches n exc 1.5 mtr wide and not exc 1.50 mtr depth and getting out in soft/loose soil, complete all as specified and directed.
M&L for PCC 1:4:8 Type D2 (using 40 mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per Item No 114, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified & directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) rough finished flat surfaces complete all as specified and directed.
M/L RCC (1:1.5:3) type A1 using 20mm graded aggregate as in Slabs supported on walls, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Use & Waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.
M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Use & Waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions for square/rectangular rough finished flat surfaces of concrete complete all as specified & directed.
M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregates) as in Columns, pillars, piers, posts and struts complete all as specified & directed.
Materials and labour, brick work with sub class ‘B’ bricks straight curved on plan exceeding 6 meter mean radius with old size bricks built in CM 1:6, including demolition of old bricks in cement mortar complete all as specified & as directed.
S & F mild steel flat iron as in hold fast clamps small articles conforming to FE 290 GDE -E- 165.complete all as specified and directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe- 290 (Gde E- 165) complete all as specified and directed.
M&L for Hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified & directed.
M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregates) as in subbase, floorings etc complete all as specified and directed.
M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in subbase, floorings etc complete all as specified & directed.
M&L for Rendering in two layers, 1st layeer with CM 1:6 10mm thick and 2nd layer with 5mm thick in CM 1:4 mixed with water proofing compound on fair faces of brick work or concrete surfaces finished even and fair complete all as specified & directed. Note : Water proofing compound shall be measured and paid separately.
Supply only integral water proofing compound.
M & L for preparation of newly plastered surfaces of walls and apply two coat of cement base paint over a coat of alkali resistant wall primer, complete all as specified and directed.
M&L for two coats synthetic enamel paint over a coat of red oxide on new iron surfaces of any description not otherwise described over 10 cm including preparation of new or previously untreated surface all as specified & directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soils complete all as specified and directed.
Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.
Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified
Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified
Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS) as earth wire connected with main common earth dolly complete all as specified and directed for the following :- One light/fan/bell/exhaust fan point controlled by one, one-way Modular type switch 5/6 Amp complete all specified and directed.
One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way modular type switch complete all specified and directed.
One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way modular type switch complete all specified and directed .
All as per item No 137.01 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLS cable as earthwire complete all specified and directed.
M & L for Circuit/submain wiring with single core FRLS PVC insulated copper stranded conductor cable drawing into rigid conduit pipe/ casing caping as required of 1.50 Sqmm for Inverter wiring, complete all as specified and directed.
S&F switch piano flush type white finish 5/6 Amps, single pole one way , 230 volts, 50 hz complete all as specified & directed.
S &F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.
S&F switch piano flush type white finish 15/16 Amps single pole one way, 230 volts, 50 hz all as specified and directed
S &F socket out let 5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.
S&F fan regulator socket type, flush type stepped type ,electronic ,450 watt complete all as specified and directed.
Supply and fix in replacement of Modular switch 1 way 6A, 1 module 240V, 50Hz complete all as specified and directed.
Supply and fix in replacement of Modular Socket, 6A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.
Supply and fix in replacement of Modular switch 1 way 16A, 1 module 240V, 50Hz complete all as specified and directed.
Supply and fix in replacement of Modular Socket 6A/16A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.
Supply and fix in replacement of Modular fan regulator step type in 5 steps, 240V, 50Hz complete all as specified and directed.
Supply and fix in replacement of Modular Bell push 6A 1 module, 240V, 50Hz complete all as specified and directed.
Supply and fix in replacement of electric call bell ding dong type, AC, 240V, 50Hz complete all as specified and directed.
M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as specified and directed
Supply and fixing sheet metal enclosure double door type for VTPN (Triple Pole and neutral) 415 Volt AC 4 way with 200 Amps rated busbar all as specified and directed.
Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar all as specified and directed.
Supply & fixing MCB , SP, AC, 240 volts of 06 to 40 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.
Supply & fixing MCB, SPN, AC, 240 volts of 63 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed.
Supply and fix MCCB 100A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed.
Supply and fix in replacement of old unserviceable LED tube light fitting 20 watts with polycarbonate housing and polycarbonate diffuser with integrated electronic driver with all accessories including connecting up with pvc insulated and pvc sheathed twisted three core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.
S&F Angle holders (metal ring) PVC/Poly carbonate type B-22 with back plate,complete with LED bulb 12watts complete all as specified and directed
Supply and fix in replacement of old unserviceable LED mirror light fitting integral slim LED batten integral 9/10Watts of 2 feet long internally pre wired complete with all accessories and including connecting up with PVC insulated and PVC sheathed twisted two core wire of suitable size complete all as specified and directed
Supply and fix recessed mounted LED panel light 2'x2' size, 36 watts, full white / warm white as per site requirement with electronic driver in CRCA sheet steel body with polycarbonate diffuser suitable for POP/ Amstrong / grid false ceiling complete with all fixing accessories including making electrical connection with PVC insulated and PVC sheathed twisted two core wire of suitable size complete all as specified and directed.
Taking down old unserviceable light fittings of any description and S&F building security light 30Watt,IP66 LED street light with aluminium pressure die cast housing including brackets made out of 40mm dia GI pipe light grade,bend to shape incliding 02 Nos flat iron clamps, nut & bolts and connection complete all as specified and directed
Taking down old sub main wiring and S&F new sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 4.0 Sqmm LT, 1100V grade, drawn through and including adequate sizes PVC non metallic conduit of 20mm / approprite dia with accessories and fittings and one run of 4.0 Sqmm single core multi stranded copper conductor cable as earth continuity conductor. Two runs of cable one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. Cable required for connection to DBs shall be deemed to be included and shall not be measured separately. Earth wire shall run inside the conduit pipe complete all as specified and directed. Note :- Extra length of cable required for connection to MCBs shall be deemed to be included in quoted rate)
All as per serial item No. 163 above but sub main with two runs of 6.00 Sqmm copper conductor and one run of 6.0 Sqmm as earth continuity conductor complete all as specified and directed.
M & L for Circuit/submain wiring with single core FRLS PVC insulated copper stranded conductor cable drawing into existing PVC rigid conduit surface /concealed/ casing caping as required of 1.0 Sqmm for Inverter wiring, including taking down unserviceable existing wiring etc complete all as specified and directed.
Taking down old unserviceable fan & Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC)
S&F Exhaust fan Steel body AC single phase 230/240 Volt of size 300mm heavy duty sweep complete with louvers including making whole on wall to fix exhaust fan and grouting of nut bolts etc and making good the disturbed sufaces of wall complete all as specified and directed.
Supply and fix in replacement of ventilating / PVC exhaust fans fancy square type 225/250mm sweep with plastic fiber body heavy duty 230 Volt AC, single phase complete with plastic louvers and including making suitable size of holes in wall for fixing the fan & making good including making electrical connection with ceiling rose including taking down existing unserviceable ventilating fan of any description complete all as specified and directed.
Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.
Supply and fix single pole and neutral sheet metal enclosure with two pin and earth plug and socket also including MCB Single Pole 20 Amps, 240 Volt and fixed flush in wall suitable for geyser connection complete all as specified and directed.
Supply and fix modular MCB protected plug and socket board in sheet steel enclosure with 25 Amp rated mini MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface complete all as specified.
Taking down existing unserviceable service cable of any description & Supply and laying or fixing or passing through pipe 1100volts grade heavy duty cable with XLPE insulated multistranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or strip and overall PVC sheathed 25sqmm nominal cross section,4core in service connections as per IS 7098(Part1) including connecting on LT OH line/LT panel/DB with suitable lugs,glands,binding wire etc complete all as specified and directed
Supply and laying neat dry river sand in trenches for cushioning to cables in two layers, Ist layer of 8 cm thickness laid before laying of cable and IInd layer of 15 cm thicness laid after laying of cable (total 23 cm) and punning properly around the cable complete all as specified and directed. Note:- Thickness of sand cushioning shall be taken as 18 cm after punning for payment purpose.
S & F GI Pipe light grade of bore size 50 mm for cable protection complete all as specified and directed.
M& L for cutting the existing floor/roads for laying of cable/Gi pipe and making good the disturbed surface with PCC 1:2:4 type B1 (using 20 mm stone aggregate) complete all as specified and directed.
Supply and laying old size sub class 'B' bricks in trenches for cable protection as cable cover, laid dry, flat adjacent to each other across the length of cable complete all as specified and directed
Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron,UL listed,CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 30kg/pit(resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7.The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) and FRLS insulated copper conductor of size 6 sqmm, single core cable drawn through and including suitable dia of medium grade GI pipe upto 7 mtr incl cutting and chases on wall and floor complete all as specified and directed. Note: The rate quoted above shall be deemed to be included for excavation and earth work, refilling, removal of surplus earth and making good the surface around chemical earthing.
Supply and install desert cooler electric driven (single phase) 230 Volt 50 Hz having steel fabricated cabinet of size 26 inch x 17 inch x 50 inch(Approx) with 22 SWG PGI sheet water storage tank including round chrome double diversion grills, PVC fills Honeypad, Three speed copper wounded Motor 1400 RPM with aluminium blade including submersible water lifting pump suitable to lift water upto 6 feet including Speed regulator,electrical cord three core and plug top 5 Amp complete in respect with audjustable iron wheel stand all as specified.
Supply installation, commisioning of water cooler partially stainless steel , electric driven single phase having approx storage and nominal cooling capacity of 40/80 Ltrs
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA
Supply and fix modular MCB protected plug and socket board in sheet steel enclosure with 25 Amp rated mini MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface complete all as specified.
VINAYAK CONSTRUCTION COMPANY
Manavi Constructions & Suppliers
AMAR NATH SHARMA
KISHORE CHAND DINESH CHAND
M/S STAR CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .