Special repair works to K5 Peravallur Police Station and Renovation works to compound wall at Peravallur in Chennai city. (Re-Tender)

Amount

1.1) Earth work excavation for foundation in all soils and sub soils to the required depth (including refilling) a) 0 to 2m depth

16.2) Supplying and fixing of Terra cotta jally (Not below 50mm thick) of best quality and fixing in position with cement paste and red-oxide putty a) In Ground Floor

24) Manufacturing & supply of steel windows (Weight basis)

39) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate

41) Painting the new Iron work with two coats of approved first class synthetic enamel ready mixed paint

Electrical arrangement 74) Charges for assembling and fixing of ceiling fan

238) Applying one coat of Anticorrosive treatment for steel grills

Annexure 2.15) Supply and filling in foundation and basement with Stone dust in layers of 150mm thickness

3.1.3) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly) for foundation using 40 mm gauge broken stone jelly

6.2.2) Brick work in C.M. 1:5 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a) In foundation and basement

8.2.3.1) Providing and laying in position, Standardised concrete Mix M30 Grade Concrete a. In Foundation and basement

b. In Ground floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a) In Ground Floor

10.2.2) Brick partition wall in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm thick (B.P.) b) In Ground Floor

18.1) Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

21.5.2.2) Supply and Fixing Soild UPVC door Shutter with frame

29.8.1) Supplying and fixing of Colour Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm thick

29.9.1) Supplying and fixing of colour ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

32.1.1) Finishing top of roof with one course of pressed tiles 23 x 23 x 2cm over a bed of C.M (1:3), 12mm thick mixed with water proof compound at 2% by weight of cement etc.

32.1.5) Pointing the Pressed Tile over the roof with cement mortar 1:3

33.1.1) Plastering with CM 1:5 (One of cement and five of crushed stone sand) 20mm thick finished with neat cement

33.2.1) Plastering with CM 1:5 (One of cement and five of crushed stone sand) 12mm thick

34.2.1) Plastering in C.M. 1:4, 12 mm thick

37.3.1) White washing two coats using clean shell lime slaked

38.8.2) Painting the old walls with two coats using approved quality of best Oil Bound Distemper over the plastered surface including cost of distemper, primer, cleaning and thorough scrapping

43.1.1) Suppying and fixing additonal Reinforcement by Checking the diameter of the existing rebars and if the diameter is less than 30% of the original diameter, provide additional reinforcement.

43.2.1) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels binding wire insulated with PVC

44.6.1) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe with (UPVC special clamp )

52.1.1) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 a) 32mm PVC pipe with necessary PVC/UPVC specials

b) 25mm PVC pipe with necessary PVC/UPVC specials

c) 20mm PVC pipe with necessary PVC/UPVC specials

52.8) Supplying and fixing of 40mm dia MS clamp sets for the erection of submersible pumpset

53.5.1) Supplying and fixing of porcelin Wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

57.1.1) Supplying and fixing EWC superior variety (white) 500mm

58.3) Supplying and fixing the following dia PVC (SWR) pipe including all required PVC specials etc., all complete., a) 110mm dia PVC SWR pipe

b) 75mm dia PVC SWR pipe

59.2.1) Supplying and fixing 150mm x 100mm size stone ware Gully trap using chamber burnt bricks of size 9”x41/2”x3” (23x11.4x7.5cm)

60.1) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety)

61.3) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 b. 110 mm UPVC Non Pressure pipe

64.1.2) Wiring with 1:5sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI make 5 amps flush type switch b) light point with bakelite battern type holder

65.1.2) Wiring with 1.5 1 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.(PVC Electrical Box )

70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark

71.2) Supplying and fixing of 32 AMPS Triple pole main switch

75.2) Supply and delivery of following Electric Ceiling fan a) 48" Electric fan 1200mm sweep

77.7.1) Run off mains with 2 wires of 2.5 Sqmm copper PVC insulated unsheathed single core 1.1KV cable (Open wiring)

79.1) Supplying and fixing of 1 No of 32 Amps 500 Volts grade porcelain fuse unit

80.2) Supplying and fixing 1 No of 450 x 375 x 20 mm thick TW plank well varnished with 3 No 32 amps 500 volts fuse unit

82.3.1) Supply and fixing of 30W LED street light fitting with LED

107.2.1) Supply and Run off main with 4 wires of 6 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable (Open wiring)

171.2.8) Supplying and delivery of 2.00 HP Submersible pump set for 150mm dia borewells

176.3.1) Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal)

177.2.1) Supply and fixing of horizontal three phase 8way triple pole and neutral MCB sheet steel enclosure distribution board with Metal door cover with IP 42 Protection

207.3.1) Painting the false ceiling / walls with two coats of 1st class ready mixed plastic emulsion paint

207.4.2) Painting the old walls with two coats of 1st class ready mixed exterior emulsion paint of best approved quality including thorough scrapping

207.5) Painting the old wood work with one coats of approved Ist class synthetic enamel paint including thorough scrapping

208) Removing the damaged A.C sheets in the places shown without affecting the purlins, rafters, joists etc

209.5.2) Clean removal of cement plaster from walls and racking out joints 20mm deep

213) Supply and delivery at site and fixing of SFRC manhole cover with frame a) 0.75 x 0.75m

213.1) Dismantling the damaged brick works in cement mortar in all floors without affecting the adjacent structures and clearing the debries 2km away from the site

216) Dismantling the damaged pressed tiles in cement mortar without affecting the adjacent structures in any floor

219.1) Supplying and fixing of Electrical materials of approved ISI make a) 5A switch

b) 5 Amps 3 Pin Flush Type Wall Socket only

c) 15 Amps 3 Pin Flush Type Wall Socket only

221) Removing the damaged broken door/window /ventilators including the removal of frames, hinges, fastenings and shutters from the existing structure and stacking the same carefully for reuse

224.1) Dismantling the damaged RCC by manual / by using deploying machineries without affecting the adjacent structures

228.2) Labour charges for chipping the spalled and old cover concrete of the column/slab and other elements by using chipping machine fitted with sharp & flat chipping bit without affecting the concrete structure.

229.2) Making anchoring in the existing damaged RCC works by drilling 12mm dia holes up to a depth of 75mm maximum and fixing 8mm dia L shaped anchor rods as shear connectors at every 300mm c/c on the surfaces of the columns/slab

238.1) Applying one coat of Anticorrosive treatment for window grills

251.5) Supplying, laying, fixing and jointing the following dia UPVC pipes as per D-1785 of schedule 40 of wall thickness (Below GL) a) 40mm dia UPVC pipe

254.2) Providing two legged scaffolding using 15cm diameter casurina props or best quality bamboo posts of 4m overall length 8m height in addition of 2.5m height

255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9watts LED bulb

343.2.1) Supply,fabricating and erection of steel truss (weight basis) in suitable Tee angle, rafter, purlins, cross, 'I' angles, supporting angle

343.2.2) Supply and fixing of Galvanium Roof sheet of 0.47mm thick over MS purlin of approved ISI quality

362.2.2) Supplying and fixing of Stain free nano polish Vitrified Tiles of size 600x600x8mm for flooring and other similar works

455.1.2) Supplying and fixing of best approved quality of following water supply/sanitary fittings confirming to I.S. specification a) 15mm dia Stainless Steel Health Faucet

503.1) Supply and laying of required dia of Nylon rope

609.6) Supply and delivery of 150mm OD ribbed screen pipes (6kg/cm2) as per IS 12818/1992 of approved quality for borewells

609.6.1) Supply and delivery of following CS PVC casing pipes (6kg/cm2) as per IS 12818 / 1992 of approved quality for borewells a) 150mm CS PVC casing pipe

609.6.2) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole (a) 150mm dia casing pipes assembly

615.2.1) Labour charges for the erection of submersible pumpset in Borewell/open well including fixing and jointing submersible cable with proper clamps upto the starter to required depth

615.3.5) Supply and delivery of direct online DOL starter with single phasing preventor with analog ammeter and voltmeter confirming to IS13947 upto 5 HP

616.4.1) Supplying, laying,and jointing the 32mm dia HDPE Pipe 10kg/cm2 of best approved quality with ISI mark ISI suitable for submersible pump in borewell

619.7.1) Supplying and fixing of following dia UPVC Ball Valve one side compression end and other side female end Confirming to I.S Specifications a) 32mm dia Ball Valve (UPVC)

b) 25mm dia Ball Valve (UPVC)

707.2.1) Supplying and laying 3 core 4 sqmm FLAT COPPER CABLE with ISI mark including cost of all materials specials etc. all complete.

741.2) Supply and fixing of following MCB / ELCB / RCCB (Higher end) including cost of all materials, labour charges and erection charges etc. a) 63 Amps 30 MA four pole RCCB / ELCB

b) Single Pole & Neutral 20 Amps, 10KA

c) Double Pole 40A, 10KA

779.2) Supply and installtion of roof : Design, detailing, Supply & Erection of Sandwich Polyurethane foam panel (PUF PANEL) of 50 mm thickness

799.1) Drilling of 150mm dia Borewell in alluvial soil by director reverse rotary mud and circulations method a) upto 76m depth

799.3) Charges for developing the borewell for the entire depth with air compressor of 300CFM capacity [Minimum 4 hours]

799.3.1) Supply and fixing of PVC 160mm dia top end cap of approved make

832.5.2) Supplying and fixing in position of UPVC window of casement type (open) for all sizes

832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

dp constructions

K.Saravanan

Bidder Name

dp constructions

K.Saravanan

S.SANTHAKUMAR