Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹49,160
Closing Date
29 Aug 2026, 6:00 pm3d left
GE (NW) Mankhurd
GE (NW) Mankhurd
PROVISION OF RAIN WATER SHED OVER RESIDENTIAL COLONY GATES AT 464 DUs MD ACCN, NAUSHAKTI NAGAR UNDER GE (NW) MANKHURD.
2026_MES_782038_1
8625/E8
Open Tender
Civil Works
Item Rate
180 days
Mankhurd
As per tender document
8 documents required · 8 mandatory
₹500
GE (NW) Mankhurd
₹49,160
Yes
29 Aug 2026
31 Jul 2026
31 Aug 2026
31 Jul 2026
29 Aug 2026
15 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in in any type of soil. | 25 | Cum | - | - |
| 2 | Returning and filling in, including, spreading, levelling, watering and well raming in layers n.exc 25cm in hard/Dense soil. | 15 | Cum | - | - |
| 3 | Removing excavated material (Soil) n.exc. 50m and sepositing where directed at a level n.exc. 1.5m above the starting point | 10 | Cum | - | - |
| 4 | M&L Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete. | 1.5 | Cum | - | - |
| 5 | M&L for RCC M-30 design mix (20mm graded stone aggragates) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete | 5 | Cum | - | - |
| 6 | M&L for RCC M-30 design mix (20mm graded stone aggragates) in Columns, pillars, piers, posts and struts | 1.5 | Cum | - | - |
| 7 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter | 20 | Sqm | - | - |
| 8 | M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surface of concrete square/ractangular or polygonal. | 15 | Sqm | - | - |
| 9 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. | 400 | Kg | - | - |
| 10 | Ditto above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders | 60 | Kg | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
BOQ_876145.xls
BOQ • 0.40 MB
8625General.pdf
Tender Documents • 0.95 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].