Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹74.2 LAccepted-AOC KOIL KOIL PULWAMA PULWAMA JAMMU KASHMIR 192301 | PULWAMA | JAMMU AND KASHMIR | 192301 | L1 | Accepted-AOC ACCEPT | |
| 2 | L2₹76.6 L+₹1.3 L (1.78%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹77.4 L+₹2.1 L (2.82%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹84.5 L+₹9.2 L (12.2%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹84.7 L+₹9.4 L (12.5%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹1 Cr
EMD Value
₹1.8 L
Closing Date
11 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF SRINAGAR
CWE AF SRINAGAR
SPECIAL REPAIR TO BLDG NP 245 A B C AT AF STN AWANTIPUR
2023_MES_623005_1
CWE(AF)SGR/AWA-32/2023-24
Open Tender
Civil Works
Item Rate
180 days
AF STN AWANTIPUR
AS PER NIT
8 documents required · 8 mandatory
₹1,000
Yes
GE AF AWANTIPUR
₹1.8 L
19 Mar 2024
17 Oct 2023
13 Dec 2023
17 Oct 2023
11 Dec 2023
27 Nov 2023
Amount
B/R PORTION
Dismentalling of plain or corrugated steel sheeting of any gauge, thickness etc in roof coverings/cladding/eave etc complete all as specified and directed.
Supply and fixing galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roof, 0.63mm thick, grade of zinc coating 275, with 120 grms/sqm zinc coating and grade 'B' Class 8 complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Galvanised plain mild steel sheeting 0.63mm thickness fixed with 'L' type or 'J' or cranked hook boltes with washers, in roofs as in ridge etc all as specified and directed.
Refixing Plain or corrugated steel sheeting, any gauge, thickness, roof coverings with two corrugation side lap fixed with L' type or 'J' type or cranked hooked bolts and dome type bitumen washers complete all as specified and directed by Engineer-in-Charge. Note:-serviceable sheets obtained under item No 01 above shall be re-used.
Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing the rubbish of the premises complete all as specified and directed.
Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land, complete all as specified and directed.
Material and labour 25mm PCC 1:2:4 Type B-0 (Using 12:5mm stone agg) as in sub base floor , complete all as directed and specified .
Material and labour Non skid ceramic coloured joint free tiles 7-8mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 Sqm in floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
Material and labour for Vitrified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
All as per Srl Item No 09 here-in-before, but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
Material and labour for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 450x300x7mm / 350x 250x 7 mm / 450X 350X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.
Taking down (Steel/ Wooden) chowkhats of frames of any description n.exc 1.50 sqm with shutters (without taking off shutters from the frames) and making good disturbed portion complete all as specified and directed.
All as per Srl Item No12 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm(without taking off shutters from the frames) and making good disturbed portion complete all as specified and directed.
Taking down shutters of any description exc. 1sqm and not exc. 2 sqm each, complete all as specified and directed.
All as item No. 14 above but refixing of shutters in same opening, of any descriptions exc 1.0 sqm but.n.exc 2 Sqm each.
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and directed.
Supply and fixing for 4.8 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads/ MS square tube in square panes not exc 0.50 sqm each fixed with steel frame work complete all as specified and directed.
Supply and fixing for 5 mm thick Figured glass, pin head type and glazing with oil putty in squares/rectangular n exc 0.5 sq. m in each pane complete all as specified and directed.
Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete.
Supply and fixing gaurd bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain/square, let in and fixed with flate iron or wall frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.
Supply and fixing Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats, complete all as specified and as directed by the Engineer-in-Charge .
Supply and fixing Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats, complete all as specified and as directed by the Engineer-in-Charge .
Supply and fixing Mild steel hold fast made of flat iron conforming to 410-0 or Fe-310-0 compelete all as specified.
Material and labour for PCC 1:3:6 type C1 (using 20 mm graded agg) as in coping , PCC block for fixing of hold fast and filling of steel frame etc complete.
Framed work as in false ceiling, doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 grade, all as specified and directed.
Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation board/slabs/blankets any thickness including grid work/aluminium frame work, cover fillets complete all as specified.
Proividng and Fixing False ceiling with semi perforated 12mm thick micro GRG false ceiling tiles at all heights with GRG (Glass fibre reinforced gypsum) false ceiling tiles of size 595 x 595mm of approved texture , design and patterns having moisture content less then 2% humidity resistance of 99%, NRCO. 52 to 0.75 as per is 8225: 987, noncombustible as per BS 476 (part 4) -970 and light reflectance of 85% (Minimum)to be laid in true horizontal lavel supended on interlocking metals T-Grid of hot dipped galvanised iron section of 0.33mm thick (Galvanised @ 120 gms per Sqm including both sides ) comprising of main-T runners of size 15 x 32mm of length 3000mm, cross - T of size 15 x 32mm of length 1200mm and secondary intermediate cross- T of size 15 x 32mm of length 600mm to from grid module of size 600 x 600mm, suspended from ceiling using galvanised mild steel items (Galvanizing 80 gms per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- Shape level adjuster of size 85 x 25 x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 of length 3000mm to be fixed on prephery wall / partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engr-In-Charge.
Supply and fixing in repairs, 18 mm thick Pre-laminated HD HMR board, both side laminated with teak finished with nails /screws as in kitchen cabinet/shelves/cup board shutter including 6 mm thick thick teak wood beads all around complete all as specified and directed.
Supply and fixing in repairs, 18/19 mm thick Pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as cup boards shelves, partition etc complete.
Supply and fixing in repairs mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete fixed with screw or by welding complete all as specified and directed.
Supply and fixing Factory made Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass/gauze etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); in second class hardwood, Complete all as specified and directed by Engineer-in-Charge
Supply and fixing 35 mm thick Second class hard wood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated as directed by Engineer-in-Charge.
Material and labour for preparation of new wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of old wood and Wood based surfaces, of any description, not otherise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparing of new or previous untreated steel surfaces over 10cm width or girth and making good including primer and make the surface smooth by rubbing with sand papers etc and applying two coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparing of old painted steel surfaces over 10cm width or girth and making good with & including by necessary red lead putty and make the surface smooth by rubbing with sand papers etc and applying one coat of synthetic enamel paint on old prepared surfaces of steel complete all as specified and directed.
Supply and fixing for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supply and fixing as specification and drawing.
Supply and fixing of factory Made Solid panel PVC door shutter, 28 to 30mm thick (stiles) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded and wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheetb eadingplain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at site as per specification & drawing.
Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed
Material and labour for Brick work with sub class B bricks ,straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed.
Brick work with old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement : 4 coarse sand), all as specified and directed.
Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc, and removing same from the Site(s), complete all as specified and as directed.
Material and labour for rendering 10 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.
Material and labour for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on wall surfaces, finishing the surface even and smooth without using extra Cement complete all as specified. Note:- Integral water proofing compound shall be measured and paid for separately.
Material and labour for rendering 5 mm thick in Cement Mortar 1:3 on concrete surfaces on ceiling finished Even and Smooth without using extra Cement complete specified and directed.
Supply only integral water proofing compound all as directed.
Material and labour for preparation of newly plastered wall surface and applying of Birla/JK white wall putty approx 3 mm thick in two layer as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.
Material and labour for complete removal of existing treatment by scraping, washing, rubbing down or stopping distempered or painted surfaces etc of walls plastered or un-plastered & removing all vegetation growth, cleaning to the entire satifaction of Engr-in-Charge & applying of Birla/JK white wall putty approx 3 mm thick in two layer as per manufacturer's instruction on existing prepared surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.
Material and labour for preparation of newly plastered ceiling surface and applying of Birla/JK white wall putty approx 3 mm thick in two layer as per manufacturer's instruction on new surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.
Material and labour for preparation of old plastered ceiling surface and applying of Birla/JK white wall putty approx 3 mm thick in two layer as per manufacturer's instruction on old surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.
Preparing new plastered or un-plastered surfaces of walls and applying two coats Acrylic exterier emulsion paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) over a coat of acrylic primer complete all as specified and directed. (Make:Asian/Berger/Nerolac/ICI/Shalimar/Garware/Johnson).
Preparing old plastered or un-plastered surfaces of walls by scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, moss and efflorescence salts and trading oil and greasy spots etc and applying one coat of exterior acrylic emulsion paint in camouflaging (Disruptive) pattern in three colours (Green, grey and brown), complete all as specified and directed. Make : Asian/ Berger/ Nerolac/ ICI/ Shalimar/ Johnson.
Preparation of new surfaces of steel or iron work or CGI/ PGI sheeting in walls or roofing, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint in camouflaging (Disruptive) pattern in three colours (Green, grey and brown) over a coat of acrylic primer complete all as specified and directed. Make : Asian/ Berger/ Nerolac/ ICI/ Shalimar/ Johnson
Preparation of old painted surfaces of steel or iron work or CGI/ PGI sheeting in walls or roofing, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint in camouflaging (Disruptive) pattern in three colours (Green, grey and brown), complete all as specified and directed. Make : Asian/ Berger/ Nerolac/ ICI/ Shalimar/ Johnson.
1.5 mm thick stainless steel telescopic channel of size 30mm wide for sliding drawer at extended length with all necessary fixing arrangement to the drawer/wall complete all as specified and directed.
Material and labour for first class hard wood (teak) lipping of size 19mm x 6mm thick ,fixed to shutters complete all as specified and as directed.
Material and labour for continnous (piano) hinges mild steel, 40mm width of flaps (when open), bright finish or electrogalvanised in repair.
Supply and fixing for size 75mm Brass handles, cast type, polished bright complete all as directed by Engr-In-Charge.
50mm dia cupboard knobs of MS fixed with nuts, screws and washers complete all as specified and directed.
Supply and fixing for ball catcher for cupboard/cabinet etc complete all as specified and directed.
Supply and fixing in repair toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws
Supply and fixing in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall all as specified and directed by Engr-in-Charge .
Supply and fixing for Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge .
Supply and fixing in repair Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms)
Suply and fixing for CP health faucet of 1.25Mtr long CP flexable tube with necessary fittings complete all as specified and directed.
Material and labour for 18-20mm thick granite stone (slab) of any colour/type, (table rubbed and polished) work as in floors/ vertical surfaces, cooking platforms and like, set in neat cement including pointing in white cement with admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortor (1:6) laid and jointed with gray cement slurry mixed with pigment, , complete all specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations.
Demolition of cement concrete (reinforced) to Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
Material and labour for RCC (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Type B1 1:2:4 (20 mm gradded aggregate) complete all specified and directed.
Suuply and fixing mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all specified and directed.
Formwork to sides and soffits of floor or slab, roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc
Demolition of cement concrete as in ground floors and pavings not exceedig 15 cm thick below or above ground level complete all as specified.
Material and labour 75 mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in plinth protection even and smooth without using extra cement complete all as specified and directed.
Supply and fixing for sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and fixing in repairs Stainless steel plate rack of size 1200 x 900 x 0.8 mm thick fixed to wall complete all as specified and directed.
Supply and fixing in repair curtain rails of stainless steel with fixing brackets, stops, rollers,funnels etc complete.
Supply and fixing in repair PVC twin dual type flushing cistern 8 ltr capacity white with all internal fittings including brackets PVC connection 45cm long including nut and PVC washer at both ends including 32mm bore PVC long bend flush pipe 90cm long complete all as specified and directed.
Supply and fixing in repair Vitreous China wash down water closet (pedestal pattern), White/coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and chromium plated jet including PVC connection, fixed complete including demolition of old unservicable WC and provision of plain cement concrete M-15, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs complete all as specified and directed.
Supply and fixing for Vitreous china wash hand basin coloured, flat back type of size 550mm x 400mm including waste chain & plug, porcelain stopper, 32mm dia PVC waste pipe with CP brass coupling and set of bracket complete all as specified and directed.
Supply and fixing for 100 mm long stainless steel butt hinges with stainless steel screw complete all as specified and as directed.
Supply and fixing for extruded aluminum alloy handles of size 150mm fabricated type anodised complete all as specified and as directed.
Supply and fixing for Aluminium alloy anodised barrel tower bolts of extruded section 150 mm long and fixed complete all as specified and as directed.
Supply and fixing for Aluminium alloy anodised barrel tower bolts of extruded section 200 mm long and fixed complete all as specified and as directed.
Supply and fixing for Aluminium alloy, anodised, sliding door bolt size 200mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
Supply and fixing for Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm long complete all as specified and directed.
Taking up or down 15 mm dia steel tubing in wall, ceiling or floor and connections,including cleaning for refixing or removal to store etccomplete.
All as item No. 87 above but 20 mm dia of pipe.
Supply and fixing for 15 mm dia medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors.
All as per item No. 89 above but bore of pipe 20mm dia pipe.
Refixing 15 mm dia old steel tubing and connections in new or old position(wall,ceiling,floors,etc.)
All as per item No. 91 above but bore of pipe 20mm dia pipe.
Cutting chases,pinning for concealed water tubing and making good to facing where required and pointing in cement mortar 1:3 ,cutting exc 10cm but n.exc 20cm girth all as specified and as directed.
Material and labour for Lagging to 20 mm dia pipes used in internal water supply or plumbing all round with, 40 min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum all as specified and directed.
Supply and fixing for in repair 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply and fixing for in repair bathroom Cabinet PVC /ABS body of size 350x450mmx125mm of approved quality Make Commander/Prayag. Of cat part no 551 & equivalent
Supply and fixing in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges with chromium plated bracket and fixed all as directed.
Supply and fixing 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position incl dismantling PVC water sotrage tanks of capacity 500 litres capacity complete all as specified and directed.
Supply and fixing in repair 15mm dia 450mm long PVC connection with brass nut and washer complete all as specified and directed.
Supply and fixing in repair 15mm dia 600mm long PVC connection with brass nut and washer complete all as specified and directed.
Supply and fixing in repair 15 mm bore CP Bib tap cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule complete all as specified and as directed.
Supply and fixing in repair stop valve/angle valve,fancy type, chromium plated, cast copper alloy screwed down,high pressure, with crutch or butterfly handle of 15mm dia. Screwed both ends for iron pipe or for unions and fixed. all as specifid & directed.
Supply and fixing in repairs Stop cock/two way Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.
Supply and fixing in repair Brass CP central hole wash basin mixer for hot & cold for 15mm dia complete fixed to connection as specified and directed.
Supply and fixing in repair Brass CP sink mixer for hot & cold for 15mm dia complete fixed to connection as specified and directed.
Supply and fixing in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand &over head Shower screwd down for15 mm GI bore pipe complete all as specifed and directed.
Supply and fixing in repair Shower Rose brass cromium plated 125mm size with arm suitable for 15mm dia pipe all as specified and as directed.
Dismantling post or struts (wood,steel or RCC) any section,including taking out embedded portion and making good disturbed ground, complete all as specified and directed.
Excavation in post holes (or similar holes ) each n. exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with erath around in layer n.exc 25cm, watering and removing surplus soil to a distance n. exc 50M and making good surfaces in any type of soil.
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm, in any type of soil complete all as specified and directed.
Removing Excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.
Material and labour for cement concrete in foundation filling and mass concrete type D2 1:3:6 (using 40mm graded Agg) in post holes all as specified.
Material and labour for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
Supply and fixing for rolled mild steel in joist,channel, angle, tube or tee sections,as in posts, with nuts and bolts in plates, etc. (cut to ordinary lengths)confirming to Gde Fe 410-0 or Fe 310 all as specified and directed.
Dismantling of PVC drain pipes, jointed in cement mortar and taking out of renches, if required complete all as specified and directed.
Supply and fixing for PVC (SWR) pipes single socketed,110mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed.
Supply and fixing for PVC (SWR) pipes single socketed,75mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed.
PVC (SWR) 75mm bore (dia), Bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.
PVC (SWR) 110mm bore (dia), Bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.
PVC (SWR) 75mm Bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.
PVC (SWR) 110mm Bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.
PVC (SWR) 75mm Bore (dia), junction Single (Single T) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as specified and directed.
PVC (SWR) 110mm Bore (dia), junction Single (Single T) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as specified and directed.
Supply and fixing for PVC (SWR) vent cowl, size of bore 75mm
Supply and fixing in repairs CP grating round suitable for 110 mm dia and connecting up, fixed in repairs.
Material and labour PVC (SWR) floor trap 110 mm dia including jointing with solvent cement complete all as specified and as directed.
E/M PORTION
Taking down carefully aluminium/copper point wiring (light, bell, fan, socket) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, holder, fittings and terminal box sheets complete, stacking material at site and making good the disturbed surface of walls/ floors to match with existing surface complete all as specified and as directed.
Material and labour for point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated, unsheathed, FRLS type, 1100 volts grade,1.5 sqmm copper conductor cable unsheathed as earth continuity cable including concealed pressed steel GI terminal boxes of suitable way with 3 mm thick laminated sheed cover for mounting of switches, socket, fan regulators, connected to common earth dolly complete all as specified for the following:- (a) One light /fan/ point controlled by one nos, one way 5/6 Amps switch.
(b) One bell point controlled by one bell push
(c) One 3/5 pin socket outlet, 5/6 Amp on the same board controlled by one nos, one way switch.
(d) One 3/5 pin socket outlet, 5/6 Amp, independent controlled by one nos, one way switch.
All as per srl item No 128.00 here-in-before but using cable of size 2.5 sqmm (for phase & neutral) and 2.5 sqmm as continuous earth cable for 15/16 Amps socket outlet, independent controlled by one nos, one way switch complete all as specified and directed.
Supply and fixing in replacement of piano type switch one way, SP, flush type, 5/6 Amps, 230 volts AC, 50 Hz complete all as specified and directed.
Supply and fixing in replacement of piano type bell push switch one way, SP, flush type, 5/6 Amps, 230 volts AC, 50 Hz complete all as specified and directed.
Supply and fixing in replacement of piano type socket outlet flush type, 3 pin 2-in-1, 5/6 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified and directed.
Supply and fixing in replacement of piano type switch socket combination flush type, 2-in-1 3 pin, 6/16 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified and directed.
Supply and fixing in replacement of electronic type ceiling fan regulator, 230 volts, single phase, flush type complete all as specified and directed.
Supply and fixing in replacement of ceiling rose 3 terminals, PVC/polycarbonate/bakelite, isolated body 230 volts AC, 50 Hz complete all as specified and dircted.
Supply and fixing in replacement of electric call bell ding dong type suitable for 230 volts, single phase AC supply all as specified and dircted.
Supply and fixing in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 4 sqmm complete drawn in and includindg casing caping ISI marked of suitable size and its accessories along with 1x 4.0 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified and dircted.
Supply and fixing in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 6 sqmm complete drawn in existing conduit along with 1x 6.0 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified and directed.
Supply and fixing in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating material like polyester epoxy quoted surface mounting 4 way TPN 415 volts, vertical type, surface mounting with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete with & including one No. MCCB 100 Amps 3 pole 25 kA fixed type for incoming complete all as specified.
Supply and fixing in replacement of sheet metal enclosure DB SPN 12 way, double door, 230 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.
Supply and fixing in replacement of sheet metal steel plug & socket DB SP with metal clad 2 pin & earth plug and socket SP 20 Amps, 230 volts AC, surface mounting type complete with one MCB SP, 20 Amps, 10 kA complete all as specified and as directed.
Supply and fixing in replacement of MCBs, SP, 6-32 Amps, 230 volts,10 kA rupturing capacity, B curve type complete all as specified.
Supply and fixing in replacement of MCBs, SPN, 40-63 Amps, 230 volts, 10 kA rupturing capacity, B curve type complete all as specified.
Supply and fixing in replacement of MCBs, TPN, 40-100 Amps, 230 volts, 10 kA rupturing capacity, B curve type complete all as specified and as directed.
Supply and fixing in replacement LED tube light fitting 1x20/ 22 watts, 220 volts AC, 1200 mm, with aluminium housing & integrated electronic driver complete with driver with polycarbonate diffuser & thd< 10% including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified and dircted. Make- Havells/Phillips/Wipro
Supply and fixing in replacement of LED bulk head light fittings weather proof, anti corrosion wall/ceiling mounted opel colour decorative, round shape/ oval shaped with PC cover suitable for & including 7 watts LED lamp, lamp holders complete with all accessories all as specified and dircted.
Supply and fixing in replacement of LED tube light fitting, box type 230 volts AC suitable for & including 9/10 watts LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified. Make- Havells/Phillips/Wipro
Supply and fixing in replacement of LED wall light fittings 6/7 watt, 230 volts AC, indoor type made up of polycarbonate complete with lamp holder , LED lamp 6/7 watts, 4000 K, LED driver, connector block pre wired with all accessories complete all as specified and as directed.
Supply and fixing in replacement inverter LED bulb 9W as per IS 16102 (Part-I &2) with emergency time 4 hours (battery back up with Li Ion battery ) base cap B22 D, with electronic driver, lumen maintenance for 50000 hours @ 70 insulated cu wire internal wiring and operating voltage from 140 v to 270 V, PF>0.9 system lumen efficacy ≥ 100 lumen/watt 6500 K, THD < 30% complete all as specified and directed by Engr-in-Charge. Make- Halonix, Wipro/ Havells
Supply and fixing in replacement of fan capacitor with wire terminals of capacity 2.5 Mfd, 230 volts AC all as specified and directed.
Marerial and labour for overhauling of fan of any type and any make by opening, cleaning, greasing, oiling of fan motor after testing the faults including replacement of minor parts and re-assembling complete all as specified and directed. (Note: Spare parts & winding shall be measured and paid separately).
Supply and fixing in replacement of ball bearing suilable for ceiling/exhaust/cabin/wall/pedestrial fan of any type/make/size all as specified and directed.
Material and labour for taking down existing fan from fan rod and removing old/burnt winding, cleaning of slots/pitches by using cleaning material by removing the insulating materials and then rewinding (i.e renewal of winding) the fans with appropriate/same gauge of super enamelled copper wire and insulating material, varnishing, drying the winding for adequate period to remove the moisture content and strengthening the winding and testing to the speed and flow of the fans any make all as specified and directed for the following type of fans:- (a) Ceiling fan 1200/1400 mm sweep
Material and labour for taking down existing exhaust fan safely including replacement of ball bearing, painting with synthetic oil based paint after cleaning the metal surface and refixing the same with new complete all as specified and as directed.
Material and labour for fixing of steeel louvers with aluminium flaps self opening type of size suitable to accommodate exhasut fan of suitable size for fixing on wall along with gitties and screws. Complete all as specified and as directed.
Material and labour for taking down existing Geyser of any capacity upto 50 L and repainting the same after cleaning by synthetic enamelled oil based paint, inluding replacement of heating element, thermostat & indicating lamps red and green and descaling the complete geyser and refixing the same at its original position in serviceable condition complete all as specified and as directed.
Supply and fixing of electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed. Make-Bajaj/ Racold/ Havells/ Crompton
Supply and fixing GI pipe medium grade 15 mm dia with GI fittings such as Tees, elbows, bends etc complete all as specified and as directed
Material and labour for fixing of exhaust fan 150 mm sweep 220 V, single phase 50 Hz plastic body 275 m3/hour air delivery, 2000 revolutions per minute along with bird repellers including cutting chases/glass and making good disturbed surfaces by cement mortar along with fixing with help of hole fastener. Complete all as specifed and as directed. Make- Ventil Air Hush Havells Cat Part No- FHVVEHUWHT06/ Smart Air Neo SF / Hindware Zorio AX 150
Material and labour for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI wire 4 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board /panel/ test point at the other including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 20 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified.
Supply and fixing in replacement Solar LED building security light 30 Watt, IP 65 with battery back up, Auto on/off/dimm along with motion sensing aluminium die cast body with weather proof gasket along with and toughened glass cover, along with SS screws nut & bolt with inbuilt charger & charge controller with auto switch built in for dawn to dusk Functioning as per product TDS complete all including and connecting up including mounting including GI pipe of suitable dia and clamps, nut, bolts, washers with all accessories. Make- Halonix / Philips / Bajaj.
Supply and fixing ceiling fans copper wound double ball bearing complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Make- Havells/ Crompton/ Bajaj
ROAD/PATH/CULVERT
Demolition of cement concrete as in ground floors and pavings not exceedig 15 cm thick below or above ground level complete all as specified and directed.
PCC type C2, 1:4:8 (40mm graded aggregate), 75 mm thick as sub-floor, sub-base, floor, paving complete all as specified and directed.
Material and labour for Sand fillling 25 mm under floors or in foundation including watering and consolidation complete all as specified and directed.
Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade in floors.
M/S BALI AGENCIES
M/S ABBAS M. ENTERPRISES
M/s M Ashraf and Brothers
QAZI SONS
M/S RATHER CONSTRUCTION CO
M/S LATIF AHMAD MIR
M/S SUHEEL CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .