Repair and renovaiton of PHC Long Island. SW - Repair and renovation of 02 Nos. Ty-I quarter - Mark 7. SH - Renovation of IEI.

Amount

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with piano type switch, phenolic laminated sheet, suitable size M.S box and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc. as required.

Group - A

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Installation, testing and commisioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on celling/ wall, including connetion with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

8 way, Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required

Providing and fixing 4.00mm dia copper wire on surface or recess for loop earthing as required.

Supplying, installation, testing and commissioning of ASHLOK make SEE brand safe earthing electrode type-19, 50mm dia, length 2 mtrs (short time current -21.4 KA rms for 1 sec, peak-51.59 KA) with back fill compound including providing masonary enclosure with cover plate having locking arrangement etc. as required.

Supplying of Surface mounted LED Batten Luminaires with Lamp type 20W LED 6500K, Make: Havells, E-Lite LED PRIDE PLUS Nxt or its equivalent as approved by Engineer - in - Charge.

Supplying of Surface mounted 10W LED bulkhead fitting back lit luminaire, Make: Havells, HEXA 10W-IP66, Cat No. HEXA FT10WLED857SSYMBOPC or its equivalent as approved by Engineer - in - Charge.

Supplying of Mirror Light 9W LED surface/wall mounted LED batten luminaires, Make: Havells, Model LUMLINE, Item Description; LUMLINEBS9WLED 865SPCWH or its equivalent to ISI as approved by Engineer - in - Charge.

Supplying of Exhaust Fan 250mm Sweep (Non Mettalic Type) with all accessories etc as required.Make:-Havells, Model: Ventil Air-DX White or its Equivalent to ISI as approved by EIC

Supplying & fixing of 10W LED lamps with light output of 950 lumen Make:- Havells or its equivalent to ISI .

Supplying of 5 star, 26W to 32W (BLDC type) energy saving A.C Ceiling fan (1200mm sweep) for operation of 230v, with all accessories etc as required. Make:-Havells. Model : Efficiencia DX BLDC White or Equivalent to ISI as approved by EIC.

Supplying and fixing T.W Board of 250mm x 300mm x 60mm deep(nominal size) on surface for installation of Energy meter as required.

SARAVANA TRADING COMPANY (BID ID -61542)