Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance PLOT NO 62 REDDY COLONY BUDVEL R R DIST TS 500030 | BUDVEL | RANGA REDDY | TELANGANA | 500030 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GOLCONDA
GE GOLCONDA LANGER HOUSE OPP MILITARY HOSPITAL HYDERABAD TELANGANA-500 008
DAY TO DAY MAINTENANCE, FLOOR, JOINERY, ROOF AND CEILING OF OTM ACCN OF MH COMPLEX OF AGE B/R II UNDER GE GOLCONDA
2023_MES_592829_1
8684/E8
Open Tender
Civil Works
Item Rate
330 days
HYDERABAD
As Per Tender
8 documents required · 8 mandatory
₹500
GE GOLCONDA
₹50,000
Yes
13 Jun 2023
2 May 2023
7 Jun 2023
2 May 2023
5 Jun 2023
16 May 2023
Amount
Carrying out day to day maintanance work serveces for all plumbing works as mentioned below by deploying one skilled plumber along with one unskilled worker to attend the complaints of plumbing nature repair and replacements with materials as required at site in the area of Asif Nagar complaint cell. The deployed workers shall be available for all the working general timings that is 8.00AM to 4.00 PM and as directed by Eng-in-Charge as required.The material required for incorporation to attend the complaint shall be measured and paid separetely as supply only. List of nature of complaint of plumbing in Kitchen/Toilet/Bathroom/OHT is as below 1.Opening of air lock/blockage in GI pipe line from out let of water tank to all internal GI pipes fittings for smooth flow of water from Bib TAPS/shower/WHB pillar tap/Stop valves by application of electrically operated suction pump 2. Repair leakage of 15 mm bore CP bib tap / pillar tap/ stop cock by replacing of necessary CP brass cup and brass spindle 3.Repair leakage of 15 mm bore CP/PVC bib tap / pillar tap/ stop cock by replacing of necessary 15 / 20 mm PVC washer of 4.Taking up or down for bore of pipes in 15 mm, steel tubing and connections, including cleaning for refixing or removal to store etc completed all as spd and directed. 5. Taking up or down for bore of pipes in 20 mm, steel tubing and connections, including cleaning for refixing or removal to store etc completed all as spd and directed. 6. Labour only for the items mentioned in sech 'A' for item Nos 2 to 30. 7. Any other misclleneous plumbing works as directed by Engr-In-Charge. Note:- (a) All necessary T&P required to carry out the work will be arranged by the Contractor. (b) A penalty of Rs 800/- per person per day will be levied on the contractor in case of absence from duty.
Supply only Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms), Bore dia of pipe in 20 mm, etc complete all as specifed and directed.
Supply only Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms), Bore dia of pipe in 15 mm, etc complete all as specifed and directed.
Supply only Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms), Bore dia of pipe in 25 mm, etc complete all as specifed and directed.
Supply only PVC water tank lid/cover of size 250 ltr upto 500 ltr capacity tank complete all as specifed and directed.
Supply only PVC water tank lid/cover of size above 500 ltr upto 1000 ltr capacity tank complete all as specifed and directed.
Supply only PVC water tank lid/cover of size above 1000 ltr to 2000 ltr capacity complete all as specifed and directed.
Supply only PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends complete all as specifed and directed.
Supply only 15mm dia health faucet (ABS body ) mild steel chromiun plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and abs wall hook complete all as specifed and directed.
Supply only PVC waste pipe 900 mm long with complete fitting etc 32 mm dia complete all as specifed and directed.
Supply only PVC waste pipe 900 mm long with complete fitting etc 40 mm dia complete all as specifed and directed.
Supply only PVC float set complete of internal flushng system fitting in side for low levelling PVC cistern complete all as specifed and directed.
Supply only good quality PVC syphon kit for low level flushing cistern 0f 10ltrs capacity complete all as specifed and directed.
Supply only flush pipe of polythene of low or high density or PVC 32mm for low level Cistern to pedestal pan/squatting pan,including joints complete all as specifed and directed.
Supply only good quality rubber washers for low level flushing cistern complete all as specifed and directed.
Supply only CP brass cup and brass spindle of requred size to repir leakage of 15mm bore CP bib tap/pillar tap/stop cock complete all as specifed and directed.
Supply only CP brass cup and brass spindle of requred size to repir leakage of 15mm bore CP wall mixture/ conceled stop cock complete all as specifed and directed.
Supply only PVC washer of requred size to repir leakage of 15/20 mm bore PVC bib tap/pillar tap/stop cock complete all as specifed and directed.
Supply only 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling complete all as specifed and directed.
Supply only 25 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ceiling complete all as specifed and directed.
Supply only 15 mm wall mixer,wall mounted with bend and over head shower complete all as specifed and directed.
Supply only 32 mm Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm- 45gms / 40mm-60 gms) complete all as specifed and directed.
Supply only 40 mm Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm- 45gms / 40mm-60 gms) complete all as specifed and directed.
Supply only 100 mm stainless steel Waste coupling (half or full threaded) complete all as specifed and directed.
Supply only 15mm bore two way Bib taps, fancy type cast copper alloy, chromium plated, screwed down, screwed for iron pipe or brass ferrule complete all as specifed and directed.
Supply only 500 liters Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specifed and directed.
Supply only1000 liters Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specifed and directed.
Supply only 15 mm dia Bib tap standard of PTMT any colour (minimum weight 90 gms) complete all as specifed and directed.
Supply only 15 mm stop valve of PTMT any colour (minimum weight 90 gms) complete all as specifed and directed.
Supply only 15 mm Pillar taps of PTMT any colour (minimum weight 110 gms) complete all as specifed and directed.
Supply only 15mm bore Bib taps, fancy type cast copper alloy, chromium plated, screwed down, screwed for iron pipe or brass ferrule complete all as specifed and directed.
Supply only 15 mm dia Pillar taps fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specifed and directed.
Supply only 15 mm dia Brass Stop valves/angle cock , cast copper alloy, fancy type,chromium plated, screwed down, high pressure, , screwed both ends for iron pipe or for unions complete all as specifed and directed.
Supply only plastic water closet seat , closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device.
Supply only PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe
Supply only 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or egdes of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting exceeding 10cm but not exc 10cm girth complete all as specified and as directed.
S & F in repair Vitreous China wash down water closet pan(pedestal pattern) white ( including 'P' or 'S' trap connection to drain)or out going pipe and to flushing pipe anti shyfonic pipe etc completely fixed complete all as specified and as directed.
S & F in repair Vitreous China squatting pan , "Orrissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe) including 'P' or 'S' trap complete including provision of cement concrete complete all as specified and as directed.
S & F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including cutting for & pinning in ends of brackets or erracting stand but exclusive of fixing of supply of waste pipe complete all as specified and as directed.
Supply and fixed in repairs Vitreous china Urinal bowl flat back , size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.
M&L 75 mm PVC Nahani/ floor trap plain with grating including jointing with solvent cement including removal of existing nahani/ floor trap complete all as specified and directed.
S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls, bore of pipe in 110 mm, etc complete all as specifed and directed.
S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls, bore of pipe in 75 mm, etc complete all as specifed and directed.
M&L PVC (SWR) bends any radius 110 mm dia, complete all as specified and directed.
M&L PVC (SWR) bends any radius 75 mm dia, complete all as specified and directed.
M&L PVC (SWR) branch piece, single (single Y) equal or unequal any radious, 110 mm dia, complete all as specified and directed.
M&L PVC (SWR) junction single, (Single T) equal or unequal any radious, 110 mm dia, complete all as specified and directed.
M&L PVC (SWR) reducers 110 mm dia to 75mm dia, complete all as specified and directed.
M&L PVC (SWR) vent cowl 110 mm dia, complete all as specified and directed.
S & F in repair for Mild steel barrel tower bolts 150 mm long, stove enamelled black, with bright bolt etc complete all as specified and directed.
S & F in repair for Mild steel barrel tower bolts 100 mm long, stove enamelled black, with bright bolt etc complete all as specified and directed.
S & F in repair 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified and directed.
S & F in repair 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F in repair Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as specified and directed.
S & F in repair for Mild steel pressed handles, oval type, stove enamelled black, Size of handle in 100 mm,etc complete all as specified.
S & F in repair for Mild steel pressed handles, oval type, stove enamelled black, Size of handle in 150 mm,etc complete all as spfd.
S & F in repair 150 mm length of extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F in repair 100 mm length of extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F in repair for Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt in 300 mm etc complete all as specified and directed.
S & F in repair for Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250 mm etc complete all as specified and directed.
S & F in repair 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.
S & F in repair MS Butt hinges medium weight cold rolled of size 75mm complete all as specified and directed.
S & F in repairs mild steel 200mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified ( short type, fighter jet aeroplane shape type) complete all as specified and directed.
S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.00 mm & fixed with stainless steel wire staples fixed complete all as specified and directed.
S & F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads complete all as specified and directed.
S & F 3mm thick figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads complete all as specified and directed.
Taking down old aluminium shutter complete from frame and refixed the same after necessary repair, (prelaminated particle board/glass/lock/handle measured separetaly) area of shutter exc 1 sqm but not exc 2 sqm each complete all as specified and directed.
S&F 5.5 mm thick glass fixed in aluminium door/window/ventilator with aluminium beading complete all as specified and directed.
M&L 12 mm thick pre-laminated, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame with aluminium beading complete all as specified and directed.
S&F in repair Brass mortice lock 4 levers, vertical type size 100 mm complete all as specified and directed.
S&F in repairs double action floor spring hudraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty complete all as specified and directed.
S&F in repairs Aluminium extruded section Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
M&L for writing letters or figures (Block, Roman, Italic,or Indian) over PVC/RCC water tank (each letter per cm of width and 6 cm of hight) complete all as specified and directed.
S&F in repair mild steel 25mm dia,drapery curtain rods power coated, decorative type complete all as specified and directed.
S&F in repair mild steel, powder coated brackets, decorative type for 25mm dia curtain rods, complete all as specified and directed.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), cement concrete ( un reinforced), etc complete all as spd and directed.
M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone agg in plinth protection, finished even and smooth w/o using extra cement.
Supply only integral water proofing compound
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises and M&L non skid coloured ceramic tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.06 sqm but n'exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:6),complete all as specified and directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises and M&L non skid coloured ceramic tiles 7-8 mm thick (square/ rectanglar ) area of each tile exc 0.11 sqm but n'exc 0.18 sqm in floors etc , set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:6),complete all as specified and directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises and M&L Vitrified light shade ceramic tiles 10 mm thick (square/ rectanglar ) polished, area of each tile not exceding 0.36 sqm , in floor/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match the surface,laid over and including 15mm thick screed bed or bedding in cement mortar (1:6),complete all as specified and directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises and M&L glazed ceramic coloured tiles in vertical surface 350X275X7mm thick set and and jointed in cement slurry and pointed with white or coloured cement to match , laid over and including 10mm thick rendering in cement mortar(1:4) as backing coat, complete all as specified and directed.
Demolition of stone slab and tiles of any description or thickness in floors,approns laid , bedded and pointed any mortar etc and M&L Mirror Polished shahabad stone flooring with slab of thickness 20-25 mm,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over 20mm thick screed bed in CM 1:6 including grinding and polishing making smooth surface of floor complete all as specified and as directed.
All as per item No 84 above but in patches n. exc. 5 Sqm in area incl all necessary polishing and matching to the existing floor surfaces complete all as specified and as directed
Demolition of stone slab and tiles of any description or thickness in floors,approns laid , bedded and pointed any mortar etc and M&L Polished shahabad stone slabs on skirting/dado of thickness 20-25 mm set & jointed in meat cement slurry and pointed in white or coloured cement to match the shade over 10 mm thick backing coat in CM 1:3, including grinding and polishing making smooth surface of floor complete all as specified.
Demolition of brick work or stone masonary, built in cement mortar complete all as specified and directed.
M&L brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.
M & L half Brick wall with old size fly ash bricks straight or curved on plan any radius built in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls / celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster and disposing off the rubbish off the premises of cantonment complete all as specified and directed.
M&L rendering 15mm thick in CM 1:6 on fair faces of brick surfaces of walls finished the surfaces even & smooth without using extra cement complete all as specified and directed.
M&L 5 mm thick rendering in CM 1:3 on surface of ceilings finished even and smooth w/o using extra cement and including preparing newly plastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed.
M&L Rendering, 15mm thick , in CM (1:4) mixed with water proofing compound as per manufacturer instruction on fair surfaces of brick or concrete walls, finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC shall be measured and paid separately.
Preparing newly plastered surfaces and applying two coats of white wash on walls complete all as specified and as directed.
Preparing newly plastered surfaces and applying two coats of OBD over a coat of primer on walls complete all as specified and as directed.
M & L preparation of new surfaces of walls plastered or unplastered and applying two coats of colour wash over a coat of white wash to obtain uniform surfaces complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each complete all as specified and directed.
Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and directed.
M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified and directed.
S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3 mm MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0
M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate as in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and directed.
S & F Window guard bars, plain, let in and fixed independently in wodden frames, L or T section section supports for shelves etc. and similar articles conforming to Fe 290-0 or Gde E-165 including making hole on wooden frame to insert guard bars complete all as specified and directed.
M&L 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated.
S & F 35 mm thick IInd class hard wood factory made glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.24(a), open rebated and prepared to receive glass or gauge, divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and miterd beads or rebated sash bars for securing glass or gauge etc. complete all as specified and directed.
S & F 30 mm thick 2nd class hard wood factory made glazed and skeleton shutter divided into square, with plain chamfered or rounded metred and rebital sash bar any number and framing moulded windows, ventilators, etc. provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (b) fitted to chowkats complete all as specified and directed.
S & F flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm, etc complete all as specified and directed.
S & F MS Butt hinges medium weight cold rolled of size 100mm complete all as directed.
S & F MS Butt hinges medium weight cold rolled of size 75mm complete all as directed.
S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.00 mm & fixed with stainless steel wire staples fixed.
M & L preparation of surfaces of wood based material description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per manufacturer instruction.
S & F factory made solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction all as specified.
S & F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21.
S & F 100 mm length of aluminium anodised barrel tower bolts of extruded section and fixed.
S & F Aluminium anodised,barrel tower bolts of extruded section and fixed, length of bolt in 200 mm etc complete all as spfd and directed.
S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised
S & F for Extruded aluminium alloy handles, fabricated type,anodised, Size of handle in 100 mm,etc complete all as spfd and directed.
S & F for Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as spfd and directed.
S & F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete.
S & F 3mm thick figured glass, pin head type andd glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete.
S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc complete, as specified.
S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, etc complete, as specified and directed.
S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,three track etc complete, as specified and directed.
Dismantling Asbestos cement sheet (Corrugated/Semi-corrugated etc.) in roof covering .
M&L for 6 mm thick Non Asbestos Fibre cement board sheet in roof, fixed with J or L hook or cranked bolt with washers complete all as specified and directed.
Fixing only 6 mm thick Asbestos cement corrugated sheet in roof, fixed with J or L hook or cranked bolt with washers complete all as specified and directed.
S & F 6 mm thick Asbestos cement two pieces adjustable serrated ridge fixed with J or L hook or cranked bolt with washers.
Dismantling plain or corrugated steel/alluminium sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as spd and directed.
S&F 0.80 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275.
S&F for MS Framed work as in Flat iron supports to hold the valley gutters of rain water etc. with ends shouldered and/or riveted and similar work conforming to Fe.290.Gde-E-165 including taking down complete.
S&F for 110 mm PVC (SWR) pipes single socket length fixed as spouts on roof including cutting holes in brickwork/stone masory/concrete surface and making good with rich cement mortar and sealed with bitumen complete all as specified.
Disconnecting existing tanks of capacity exc 250 ltr & n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as spfd and directed.
Disconnecting existing tanks of capacity exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as spfd and directed.
M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bitumnious primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including rendering 10mm thick in cm 1:4 on concrete surfaces of roofs, parapet etc. finishing to surfaces even and smooth without using extra cement and provinding necessary slope with using WPC @ 3% by weight of cement complete incl taking down existing froof treatment and cement plaster of any description, roughing, preparing the surface by cleaning the surface with wire brushing scrubbinbg down with water to receive new treatment all as specified and directed. (NOTE : Supply of WPC will be paid under the respective Item)
M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bitumnious primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including taking down existing roof treatment on parapet walls, preparing the surface by cleaning with wire brushing, scrubbinbg down with water to receive new treatment all as specified and directed.
Dismantling timber scantlings 40 Sq cm and over in section in any position in framed work.
M & L for 2nd class hard wood, clean sawn, in scantiling timber fixed with nails complete all as specified and directed
Dismantling single layer mangalore pattern or similar tiles laid dry in roofing.
M & L roof tiles mangalore pattern interlocking at side joints laid dry complete all as specified and directed.
Fixing only roof tiles mangalore pattern interlocaking side joints laid dry.
M & L for Ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6, etc completed all as specified.
Dismantling wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/ slabs/ blankets any thickness, incl cover filltets and grids and S&F true horizontal level 600x600mm panels false ceiling system using hot dipped galavnized steel sections exposed surface with pre-coated capping, Main Tee of size 24x32mm at every 1200mm c/c maximum, rotary stitched cross Tee of size 24x 27mm at every 1200mm c/c and wall angle of size 19x19mm fixed to perimetre wall. The complete grid is to be suspended at every 1200mm c/c in both directions by using 2mm dia pre straightened GI wire at every 1200mm interval at the main Tee using fine finished tagular edge including 9 mm thick Gypsum boards of size 600x600 mm with rear side Aluminium fril and front side PVC lamination complete all as specified.
Dismantling boarding, any description, fixed in any position with nails and M&L Weather boarding of 2nd class H.W of 20mm to 25mm thick and rebated of thick edge to give 20mm lap and fixed with screws/nails including one coat primer and two coat synthetic enamel paint complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new or untreated wooden surfaces exc 10 cm in width or girth including preparation complete all as specified and directed.
SAI RAM CONSTRUCTIONS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .