COMPREHENSIVE MAINT AND REPAIR TO SWIMMING POOL REPLACEMENT OF CFL LIGHTS INTO LED IN AUDITORIUM DG SET CLEANING OF SWT AND OHTS INCLUDING CERTAIN WATER SUPPLY AND MISC EM SERVICES AT MOHDPUR STN UNDER AGE EM AF GURGAON UNDER GE AF GURGAON

Amount

Taking down of old unserviceable recessed mounting existing CFL Downlighter of any watt round ceiling light complete all as specified and as directed.

Taking down of existing old unserviceable MCB complete all as specified and as directed.

Taking down of existing old unserviceable submain wiring complete all as specified and as directed.

S&F in replacement recessed mounting LED Downlighter of 25 watt round ceiling light ,deep recessed antiglare premium white reflector matches for general and accent lighting with high performance with housed in aluminium/PVC body with inbuilt driver and diffuser suitable for POP ceiling, complete all as specified and directed. Make: Havells cat No: ENDURAHODLR25WLED857MOD or equivalent make of Philips/ C&S/ Crompton/ wipro Note: Rate are deemed to be inclusive of hydraulic/ conventional ladder of 28 Ft height/long and fixing light fitting at a of height of 28 Ft suitable for building in auditorium. T&P, Labour & Safety equipments required at site is deemed to be inclusive of quoted rates and has to be arrange by contractor.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. Note: Rating of MCB as per site requirement & It is recommended by Engineer-in-charge.

S & F in replacement of sub main wiring with PVC insulated, fire retardant (FR), unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 2.5 sqmm (Nominal area) drawn into existing / new conduit of any size and type with and including one run of 1.5 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green coour as continuous earth wire including lugs etc connected and tested complete all as specified and directed. Note: (i) New conduit/ casing- caping and accessories shall be included in quoted rate. (ii) Two runs of 2.5 sqmm cable and one run of 1.5 sqmm cable of earth continuity conductor and one run of PVC pipe shall be a unit length.

S&F Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid with 12 mm thickness and cost of frame work for ceiling is included complete all as specified and directed.

M&L for Carry out 'B' check and servicing of DG set as per OEM specification for DG set of 250 KVA capacity, (including the cost of the following spares (quantity) all as per OEM and directed by Engineer in Charge). (i) Engine oil (ii) Spinon lube oil filter (iii) Fuel Filter Kit 1.1 Ltrs (iv) Coolant (v) Air cleaner Safety Element (vi) Air cleaner primary element (vii) K clean 1 ltrs (viii) Poly V belt 4PK/8PK (any type & length) (ix) Thermostat Element (x) Rubber hoses of any type with tie clips of suitable size (xi) Gaskets,glands, nut, bolts & washers (xii) Radiator cleaning from outside with pressure jet spray, chemical & brush (xiii) Cleaning of DG set engine within canopy and AMF panel (xiv) Air Filter (xv) Freight & labour charges Freight & labour charges

Same as item No- 8, but for 160-140 KVA DG set.

Same as item No- 8, but for 100 KVA DG set.

Same as item No- 8, but for below 70 KVA DG set.

M&L for visiting of service engineer/ technician at site and inspecting DG set upto 250 KVA (including AMF panel problems, control unit/sensors, Engine, radiator, Alternator or any other type of complaint i.e. Mechanical, electrical or electronic or including all the three teams togather) and checking for fault/defect and noting down items required for rectification, including rectifying minor defect on site if possible, complete all as specified and directed. Note: (i) visit for servicing of DG set will not be considered in this item. (ii) Minor complaints occuring within one month after servicing of a particular DG set will not be considered in this item after lodging complaint to Contractor by Engineer-in-charge or JE. (iii) Visiting of Different technician i.e. electrical, mechanical, electronic or combine of three for the same complaint will be considered as one visit or one complaint only. (iv) Subsequent visit after first visit (defect found or not), if founded then visit for rectification of defect will not be considered in this item.

Dismantling of Fuel pump assembly and fuel injectors of any nos of engine for DG Set of capacity upto 250 KVA, and transporting it to workshop and Caliberation fuel pump & its fuel injection system and overhauling of pump valve, valve seat, Nozzel pin holes by metal deposition and machining on lathe machine, gasket, bolts etc. and refixing the same and commissioning till fuel consumption and quality & quantity of smoke is within permissible level complete all as specified & directed : Note: Transportation charges are deemed to be included in quoted rates.

Taking out of turbo charger from DG Set transportation to workshop for overhauling, repairing and replacement of turbo assembly including fan, gears and machining of vortex flow chamber of turbo & refixing to DG Set aand refixing the same and commissioning till fuel consumption, quality & quantity of smoke and load development/ sound of DG is satisfactory to EIC all as specified & directed. Note: Transportation charges are deemed to be included in quoted rates. for following capacity :

Dismantling of radiator assembly of engine of following capacity, and transporting it to workshop (if required) from site otherwise performing job at site. thereafter cleaning fins and chocked tubes after draining out water, washing with caustic, descaling and brazing for water tube leakage, repalcing of copper tube of suitable length and and size and refixing the same properly by deploying sufficient numbers of labour and commissioning and again checking for leakage after running DG on Load and checking flow speed of water through it, complete all as specified & directed : Note: Transportation charges are deemed to be included in quoted rates.

(a) 140 to 250 KVA

(b) Upto 100 KVA

Dismantling of Self Starter motor of any capacity for DG Set of capacity upto 250 KVA, and transporting it to workshop and rewinding with suitable gauge of copper wire, overhauling, repair & replacement of gears, pinion & its locking arrangment, armature, Carbon plate, carbon bush & brush, Gears etcand and refixing the same and commissioning for the torque developed by it for starting DG Set, complete all as specified and directed. Note: Transportation charges and charges for dismantling & reconnecting electric cable of starter & synchronising with control unit are deemed to be included in quoted rates.

(a) 140 to 250 KVA (Suitable for 24 V)

(b) Upto 100 KVA (Suitable for 12 V)

S& F AVR S/F VARIABLE SPEED DCDG suitable for DG set with input voltage range 415 Volt AC with neutral & Out put DC voltage for DG set upto 250 KVA as per OEM specifications, including wiring as per required at site after taking down old unserviceable one, complete all as specified and directed.

Dismantling of alternator of DG Set of capacity upto 250 KVA, and transporting it to workshop and rewinding, overhauling, repair & replacement of rewinding with suitable gauge of copper wire, gear, pinion, pulley, carbon bush & brush etc upto 250 KVA as per OEM specification, including belts, wiring, demounting as per required at site after taking down old unserviceable one, complete all as specified and directed.

Supply and fixing following spares parts upto 250 KVA DG Set: Note: Taking down old spare parts and connecting new one by deploying skill technician (mechanical, electrical, electronics or combination) including necessary nut, bolts, washers, wiring, thimbling, tagging etc. is deemed to be included in quoted rates for item no (a) to (af).

Water pump assembly Make: Kirloskar

Flexible connection (crank case to pump) Make: Kirloskar

Water pump pulley (2 grooves, 190 PCD) Make: Kirloskar

Fresh water outlet connector on heat exchanger Make: Kirloskar

Fresh water outlet connector on heat exchanger Make: Kirloskar

Non return valve 1" BSP Make: Kirloskar

Thermostat and housing assembly Make: Kirloskar

MAGNETIC PICK UP 16X1.5 THREADING (UNITCH MAKE) for dg upto 250 KVA Make: Kirloskar

Engine control unit EMS 907 including relay card, PCB & logic card) Make: Kirloskar

CONTROL RELAY, 24 V D.C., THREE CHANNEL R.B. ELECTRONICS Make: Kirloskar

RELAY BOARD UL MAKE 24 VDC 2CH. 2C/O (RELAY- OMRAN make: Kirloskar

ENGINE WIRING ASSEMBLY SUITABLE FOR EMS 907 UNIT Make: Kirloskar

WIRING HARNESS FOR CPCB CANOPY WITH PRICOL PANEL Make: Kirloskar

WIRING HARNESS ASSEMBLY WITH EMS 907 UNIT make: Kirloskar

SENSOR UNIT(FOR ELEC TEMP GAUGE) Make: Kirloskar

LUB OIL PRESSURE SENDOR 0.75 +/- 0.15 BAR TWO TERMINAL Make: kirloskar

WATER TEMPERATURE SWITCH (NO/NC) Make: Kirloskar

STOP SOLENOID assembly suitable for 12/24V Make: Kirloskar

Thermostat element (74 Deg) make: kirloskar

CURRENT TRANSFORMER (SET OF 3 CT) 300/5A Make: Kirloskar

CURRENT TRANSFORMER (SET OF 3 CT) 500/5A Make: Kirloskar

KG 934 controller unit make: Kirloskar

Relay board 2 and 1/2 12 V DC Make: Kirloskar

Engine wiring harness assembly with KG934 Make: Kirloskar

LEFT HAND LOCK WITH CATCHER (UPTO 82.5 KVA) Make: Kirloskar

LEFT HAND LOCK WITH CATCHER ( 100 TO 600 KVA) Make: Kirloskar

RIGHT HAND LOCK WITH CATCHER (UPTO 82.5 KVA) Make: Kirloskar

RIGHT HAND LOCK WITH CATCHER (100 TO 600 KVA) Make: Kirloskar

LEFT HAND HINGE Make: Kirloskar

Right HAND HINGE Make: Kirloskar

V BELT RAW EDGED COGGED.(LP1176) Make: Kiloskar

FLEXIBLE LUB OIL PIPE(FOR REMOTE FILTER) Make: Kirloskar

M&L for cutting and removing burnt out AMF panel wiring and rewiring it with copper wire of solid/stranded conductor all as per existing size with proper labelling/tagging, new thimble/ termination, connecting all circuit & logical controls, repalcing relays, timers, sensors & signal reciever, removing carbon deposition on bus bars & terminals, repairing cable tray, rewiring and proper connection of AMF panel parameters with DG set safety control unit, replacing new CTs etc. Testing and commission of AMF panel in auto and manual mode and demostrating the functionality of all the safety parameter both from saftey control panel and AMF panel all as per EIC. NOTE: wiring, CTs, thimble, tagging, rewiring of DG set mounted safety control unit etc required are deemed to be in quoted rates.

Supply and fixing of digital VAF + PF meter, Cl 1in square in size of 96mm x 96mm cross-section for DG sets suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing of DC Ammeter 0-30Amps of square in size of 96mm x 96mm cross-section, for DG sets suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing of 'under/over voltage relay, 3 phase, 415 volts', for DG sets of capacity upto 250 KVA complete all as specified and directed by engineer-in-charge.

Supply and fixing of 'under/over voltage relay, single phase, 240 volts', (set of 3 for each phase in one panel) for DG sets of capacity upto 250 KVA complete all as specified and directed by engineer-in-charge. Make: Teknika or equivalent make

Supply and fixing of battery voltage relay 12/24 VDC suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing Three element overcurent and earth fault relay as per site suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing frequency relay as per site suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing engine start relay as per site suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing speed relay as per site suiatble for DG set upto 250 KVA, complete all as specified and directed.

Supply and fixing of Fuse (HRC type) 400 amps, for DG sets of capacity upto 250 KVA complete all as specified and directed. Make: L&T/ABB/Havells

Supply and fixing LED lamp of any colour (Red, yellow, green and blue) suitable for 12/24 v DC & AC for DG sets of capacity upto 250 KVA, complete all as specified and directed.

Supply and fixing 250 Amp, 415 Volts, 50 Hz Power contactor of coil voltage 240 Volts, including spring operated add-on block and spring operated locking block along with spread suitable to bear current upto 350 Amps complete all as specified and directed. Make: L&T/Schineider/Havells

Same as item no- 35, but of 400 Amp, 415 Volts, 50 Hz Power contactor, spreader suitable to bear current upto 500 Amps complete all as specified and directed. Make: L&T/Schineider/Havells

Same as item no- 35, but 200 Amp, 415 Volts, 50 Hz Power contactor with spread suitable to bear current upto 250 Amps complete all as specified and directed. Make: L&T/Schineider/Havells

Maintenace of STPs of following sizes including cleaning of Sewage syatem, sewage lines, rectifcation of sewage blockages etc complete to ensure smooth and trouble free operation of capacity 1.5 KLD all as specified and as mentioned below:-.

i) Checking of regular parameters required for smooth operation of STP. ii) Ensure desired water quality and quantity. iii) All necessary measures to be taken for satisfactory operation of plant. iv) Regular cleaning of bar screen. v) Regular backwash and rinsing of Multi-grade filter, and Activated carbon filter. vi) To undertake regular preventive maintenance of the mechanical equipment’s such as pumps, valves etc and take corrective action in order to ensure smooth operation of the STP. vii) Checking of oil & grease and servicing of all blowers and gear boxes. viii) Physical monitoring of abnormal sound, alignment of pumps, motors, blowers, ix) To check and repair the Electrical LT panel including its components and it’s wiring for proper functioning. x) Clearing sludge bed on regular basis.

Note: i) The rates quoted are deemed to be inclusive of Repairs and replacement of spares as and when required basis by employing trained manpower. How ever the items will be measured and paid under relevant item of schedule ii) Contractor shall send trained technicians to make the plant opeartional within 3 to 4 hours by repairing the system in case of repair. Cost of replacement of spares shall be measured and paid under relevant items of schedule. Failure of operation of plant will be penalised @ Rs 1000/ per day. Suitable number of technicians shall be employed by the contractor to monitor the system on daily basis. No extra payment will be done on this account.

Nature of effluent - Domestic Sewage from toilet, Kitchen waste water shall be discharged into the STP.

INLET EFFLUENT CHARACTERSTICS

DOMESTIC SEWAGE

BOD - 250-400 Mg/L

S. Solids - 150-450 Mg/L

COD - 600-800 Mg/L

Oil & Grease - upto 50 Mg / L

DISCHARGE EFFLUENT CHARACTERSTICS AFTER TREATMENT

BOD - Less than 30 Mg/L

S. Solids - Less than 100 Mg/L

COD - Less than 100 Mg/L

Oil & Grease - Less than 5 Mg / L

Sewage treatment plant shall include the following items:-

Grit chamber

Screen Chamber

Oil & Grease Trap

Sewage equalization tank/sump

Tube Settler Tank

Sludge Holding Tank

Air Blowers, Pumps & equipment

Piping, valves etc

Irrigation / Flushing Water tank

Tertiary Treatment MGF/ACF

Electrical Panel & Cabling

Desludging the following existing chambers and getting out through sucking super soccer machine and depositing to a distance exceeding 1.5 KM out side defence land and cleaning with clean water and reuse for proper functioning complete all as specified and as directed. Note: Pumping out sludge water from MBBR tank by using diesel engine operated pump is to be arranged by contractor

Sewage well

Filter Feed tank

MBBR tank

Tube Settler Tank

Chlorine tank

Treated water tank

Collection tank

Screen Chamber

Oil and grease Chamber (3 m3)

S&F of air diffuser rod type at least 1mt long with rubber coating and SS mouth diffuser and SS clamps after removing water & sludge from equalizer tank & MBBR tank, complete all as specified and directed. Note :- Contractor shall make alternative arrangement to meet the sewage disposal during the the desluding period. The rates quoted shall be deemed to inclusive of such arragement and no extra payment will be done on this account.

M&L for Cleaning & Replacement of unserviseble sand media from sludge drying beds, and filling with clean and fine river sand or New Media for Sludge Drying Bed in layers

Supply only sodium hypochloride complete all as specified and as directed by Engr-in-Charge.

Supply only Bio Culture complete all as specified and as directed by Engr-in-Charge.

Supply only MBBR media cylindrical with extended fin, black in colour of superior quality and UV stable complete all as directed by Engineer-in-charge

M & L for servicing of air blower with positive displacement type twin lube root blower with Motor of Various capacities, including Opening the blower motor blower shaft and shaft Key ways, shaft holes etc and replacing the gland packing, gland nuts, topping up engine lubrication oil and coupling as per existing size including re-fixing the same to the original position and commissioning testing complete

M & L for installing electrical timer in existing electrical LT panel for air blower for auto working with inter-locking system between both air blowers. Time setting between both blower in manual way and including all accessories. complete all as directed by Engineer-in-charge

Excavating in post holes (or similar holes) soft / loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken dubble mixed with earth around, in layers not exceeding 25 cm

M&L for plain Cement concrete type B2, 1:2:4 (40 mm graded agg) in foundations, filling and mass concrete

M&L for Rolled mild steel Fe 410 -W (Gde- E- 250) quality-in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

Supply only of Chain link MS galvanisd fencing, any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Synthetic enamel paint on steel surfaces of any description, preparation of new or old untreated surface,one coat of red oxide zinc chrome primer & two coat of synthetic enamel paint over treated steel surface not otherwise descri-bed, over 10cm width or girth complete all as specified and as directed.

Testing of Water Samples for Chemical, bacteriological & metal analysis as mentioned below from User end and from the nearest point of OHT tank or as directed by Engineer-in-charge during delivery time for each month complete all as directed.

(b) Specific Conductivity

(c) Free Chloride (CL)

(d) Total Harness as Ca CO₃

(e) Iron as (FE)

(f) Arsenic (AS)

(g) Total dissolved solids

(h) Coliform

(i) E. Coli

(j) Colour

(k) Odour

(l) Taste

(m) Floride

(o) Turbidity

(a) Sample of Water for the above media test are to collected in transparent sterlized container/Jar/bottle (to be arranged by contractor) separately for each test against each pump houses. (Hygienically clean bottles) and proper sealing must be done by contractor.

(b) Sample of water to be collected before and after treatment shall be forwarded to Govt Lab approved & NABL accredited Lab for testing within spitulated time frame. No Extra payment will done for transportation charges.

M&L for Dewatering OHT and making surface free from fungi by scrubbing, cleaning thoroughly for removing the dirts, sediments, silts etc from the internal surfaces of RCC over head tanks (bottom & wall) by using brushes and bleaching powder and other cleaning materials as required and applying two coats of lime wash inside the surface of the tanks including writing the words " MILITARY ENGINEER SERVICES, TANK CAPACITY, DATE OF CLEANING AND DUE DATE OF CLEANING" in capital letters of suitable size on outside visible place of OH tank with synthetic enamel white paint over black back ground of 50,000 Gallons water tank complete all as specified and directed. (Note: Main source OHT must be cleaned 2 time a year)

M&L for scrubbing, cleaning thoroughly for removing the dirts, sediments, silts etc from the internal surfaces of HDPE storage tanks (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required including writing the words " TANK CAPACITY AND DATE OF CLEANING" in capital letters of suitable size on outside visible place of OH tank with synthetic enamel white paint over black back ground of following capacities complate all as specified and directed by Engineer in charge.

(a) up to 500 Ltrs capacity

(b) 750 Ltrs to 1000 Ltrs capacity

(c) 2000 Ltrs capacity

Cleaning of static tank of following capacity by providing pumping set & removing all muds, stones, other foreign materials etc washing with bleaching powder and applying a coat of colour washing for (internal and external portion) including repairing and painting of wire mesh and MS angle iron frame and writing the words " TANK CAPACITY AND DATE OF CLEANING" in capital letters of suitable size on outside visible place of Static tank with synthetic enamel white paint over black back ground and covering static tank with polyester green cloth used in arboriculture to prevent falling of wood & leaves from tree in tank complete all as specified and as directed.

upto 22,000 Ltrs capacity at New MT Section & P-74

upto 24,000 Ltrs capacity at P-10 & FF Ph

upto 35,000 Ltrs capacity at Signal centre

upto 60,000 Ltrs capacity at helipad

Taking down and installed new Supply and fixing Microprocessor based 5 Level digital indiactor with magnetic sensor and high level alarm with alarm reset system including of MS encloser box for above microprocessor unit and controller buzzer internally wired with necessary accessories complete all as specified. Note: System should be water proof.

S&F PVC insulated copper wire of 1.5 Sqmm, 2 core from tank to panel, complete all as specified and directed.

S&F PVC flexible pipe of 20mm for wire protection from tank to panel, complete all as specified and directed.

S&F in replacement of gun metal gate valve (heavy duty) with iron wheel head screwed both ends for iron pipe of 20 mm dia bore complete all as specified & directed by Engineer - In - Chrage.Make: Kartar/Sant/Leader

All as per Item No 60 above , but 25 mm dia complete.

All as per Item No 60 above , but 40 mm dia complete.

All as per Item No 60 above , but 50 mm dia complete.

Supply only in replacement of GI Tubing , medium grade , 20 mm dia bore complete all as specified & directed by Engineer - In - Chrage.Make: Jintal/TATA/Parkash

All as per Item No 64 above , but 25 mm dia complete.

All as per Item No 64 above , but 40 mm dia complete.

All as per Item No 64 above , but 50 mm dia complete.

Excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and as directed.

Removal of excavated material/surplus soil to a distance n exc 50m and depositing where directed at a level n exc 50m above the starting point complete all as specified and as directed.

M&L for Cast iron pipes with spigot and socket ends centrifugally cast in any length, laid in trenches of 150mm bore complete all as specified.

M&L for Cast iron pipes with spigot and socket ends centrifugally cast in any length, laid in trenches of 250 mm bore complete all as specified.

Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150mm bore pipe complete all as specified and directed.

All as per item No 73 but 250mm bore pipe

M&L for Run Lead joint for spigot and socketed pipes and fittings of 150 dia bore. Complete all as specified and directed.

M&L for Run Lead joint for spigot and socketed pipes and fittings of 250 dia bore. Complete all as specified and directed.

Repairing of Sluice valve (flange joints & checknuts) and ferrule leakage on site in 80mm to 250mm dia pipe by suitable gasket, nut, bolts, washer etc complete all as directed by Engineer in charge.

S&F jointing and testing of cast iron sluice valve ISI mark (PN-1.6) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts washers and gaskets including taking down unserviceable sluice valve complete all as specified of size 80mm complete all as specified. Make: Kirloskar/Kartar

All as per Item No 78 above , but 100 mm dia complete.

All as per Item No 78 above , but 150 mm dia complete.

All as per Item No 78 above , but 250 mm dia complete.

S & Fin replacement of Non return valve size 80 mm dia , including rubber fibre board gasket joint at both ends with nuts , bolts & washers including necessary earth work complete all as specified and directed by Engineer-In-Charge.Make: Kirloskar / Leader/ kartar

All as per item No 82 above but size 100 mm dia

M&L for Cutting cast iron pipes and reducing to required length before laying for 100mm dia bore pipe, complete all as specified and directed.

Same all as above item no:- 84, but for 150mm dia pipe.

Same all as above item no:- 84, but for 250mm dia pipe.

M&L for Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead for 100mm dia bore pipe complete all as specified and directed.

Same all as above item no:- 87, but for 150mm dia pipe.

Same all as above item no:- 87, but for 250mm dia pipe.

M&L for Cement concrete in foundations, filling and mass concrete of type D2 1:4:8 (40mm graded aggregate), complete all as specified and directed.

M&L for demolition drain made of Brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:6 of cement mortar, complete all as specified and directed.

M&L for construction of Valve pit chamber 90 cmx90cm (inner dimension) and 90 cm deep , from the top of MS cover fixed on PCC Base , top cover shall be of 3 mm thick MS Sheet with locking arrangement of pad lock of 50mm size including brick work with sub class"B" bricks in CM 1:4 including 15 mm thick plaster in CM 1:4 (internally and externally) and necessray earth work in anu type of soil including returning filling in and disposal of surplus oil to a distance n exc 50 mtrs and 150 mm thick PCC 1:4:8 , type D-2 , using 40mm graded stone aggregates as in floor complete all as specified and directed by Engineer - In - Charge. Note: Exacavation, returning, refilling etc is deemed to be included in quoted rate.

M&L for dismantling the electric induction motor 3 phase 415 volt 50 HZ, 5 HP capacity and shifting to workshop for rewinding with super enameled copper wire of existing gauge of approved quality including varnishing including replacement of Bearing & bush as per site and refixing at existing location including connection, commissioning and testing complete, including transportation.

Supply & Fixing under water LED light 35 watt, DC supply type, as per on site and making complete system water proof by selant and rubber washers and necessary wiring work, complete all as specified and directed. Note: Necessary arrangment like mapower, electrician, T&P, dewatering pump etc is deemed to be included in quoted rate.

Supply and fixing electronics driver, AC to DC converter duly enclosed in sheet enclosure, used for under water lights (18 Nos) each stabilizer carring load of 6 light of suitable capacity of 35x6 lights as per existing on site etc are deemed to be included in quoted rate, complete all as specified and directed

S&F pool under cleaning brush of superior quality enclosed in stainless steel enclosure of 36 inches in length, having eight wheels and provision for connection with suction sweeper hose and rope tie rings at both end of brush for manual operation with rope to remove coagulated sediments from pool, complete all as specified and directed by EIC.

Supply and fixing uncharged and non cogulant sand media and marble stone aggregate of suitable grade and size for pressure filter of size 1200mm dia made of MS floor mounted at swimming pool- 4 Nos , complete all as specified and directed.

Labour/service charged for removing old charged & cogulated sand media layer by layer including filter membranes and making new layers of sand, marble stone aggregate and filter membrane both vertical in center of vessel and between each layers sand and stone of suitable thickness and compressing it properly and the testing, commissiong filters as specified and directed by EIC. Note: (1) Rate of filter membrane of any size, type, grading and quantity as per existing is deemed to be included in quoted rate. (2) Rate are deemed to be inclusive of lifting arrangement of vessel like hydra, T&P and labour required at site. (3) Repair of minor defect encounter during overhauling of sand filter media filter is deemed to be included in quoted rate. (4) Acid and other cleaning agent required for cleaning of inner surface of vessel is deemed to included in quoted rate. (5) Rate are deemed to be inclusive of uPVC fittings (any type, size and quantity) required at site for disconnecting and refixing vessels after overhauling. (6) Rate are deemed to inclusive of repair to vessel if any damage caused to vessel and fitting due to mishandling by labour during execution of work.

Supply only multiport valve suitable for uPVC pipe upto 75 mm dia with 6 way water flow, Side mounted on vessel with 360 degree rotating handle (made of high strength plastic), including valve to be properly consealed, tighten and leakage proof, complete all as specified and directed.

Labour/service charged for removing old multiport valve and installing new valve of suitable size including fittings and fixtures as per existing on site and the testing, commissiong of valve, complete all as specified and directed by EIC. Note: (1) Rate are deemed to be inclusive of lifting arrangement of vessel like hydra, T&P and labour required at site. (2) Repair of minor defect encounter during replacement of valve is deemed to be included in quoted rate. (3) Rate are deemed to be inclusive of uPVC fittings (any type, size and quantity) required at site for disconnecting and refixing valve.

Supply and Fixing Butterfly valve of 90mm dia complete all as specified and directed. Make: Audco (L&T)

Supply and fixing DOL starter along with auxillary block (Make: L&T cat: MNX A2) suitable for filteration pump of capacity 5HP along with wiring, complete all as specified and directed.

Supply and Fixing thermal relay of 4-10 Amp range complete all as specified and directed, along with wiring, complete all as specified and directed.

Supply and fixing single phase preventer suitable for 5HP pumpset along with wiring complete all as specified and directed.

Supply Only Chlorine Test Kit with coloured sample complete all Testing fitments & OT Solution in Rexine finish Box. Make RAMCO/Declibac

Supply only for OT solution for chlorine test in 500 ML bottle complete. Make-RMCO/ Declibac

Supply only HARDNESS Test Kit with necessary fitments and testing solution in rexene finish box Make: RMCO/ Declibac / E-in-C approved.

Supply only HARDNESS Test solution(3 btls x 500 ml Each ) Make: RMCO/ Declibac / E-in-C approved.

Supply only pH test kit with coloured ample covered under BTB (range 6.0 to 7.0) or phenol red (range 6.8 to 8.4) with necessary fitments and 100 ml testing solution in rexene finish wooden box, complete all as specified.

Supply only PH test solution BTB or Phenol Red solution for pH test (500ml), complete all as specified.

Supply and fixing water Pressure gauge of 100mm dia, complete with all accessories, complete all as specified and directed.

Supply only TCCA-90 ( Try chlorocynuricacid) all as specified and directed by Engineer-in charge.

Supply only Soda Ash all as specified and directed by Engineer-in-charge.

Supply only CuSo4 powder (algaecide) type all as specified and directed by Engineer in charge

Supply only NaH SO4 (Sodium Bi sulphate ) all as specified and as directed by Engineer-in charge.

Supply only Alum Crystal type all as specified and directed by Engineer -in-charge.

Supply only Altoch GP granuals all as specified and as directed by Engineer -in-charge.

Labour only for lifting /taking out the non clogging sewage submersible pump set and motor of capacity upto 5 HP including column pipe of any bore by dismantling nut bolt washers and rubber packing etc including disconnecting of submersible cable complete from the sewage equalizer tank of depth up to 7 meter and lowering back the pump after repairing /removing the sludge from the pump including making electrical connection with the existing panel /starter and connecting the complete the column pipe assembly with nut ,Bolts,washers/packing to the existing header without any leakage complete all as directed. Note for :- Rate are deemed to be inclusive for jointing of Submersible Cable upto 7mtr, Steel wire of suitable gauge tied with motor before lowering down upto the depth of motor, reconnecting the delivery pipe line of submersible pump sets to water mains , testing for satisfactory running & continuous flow of water complete all as specified.

Labour only for lifting /taking out the Fresh water submersible pump set and motor of capacity 10 to 15 HP including CI column pipe of any bore by dismantling nut bolt washers and rubber packing etc including disconnecting of submersible cable complete from bore of depth upto 60 meter and lowering back the pump after repairing /Checking loose connection including making electrical connection with the existing panel /starter and connecting the complete the column pipe assembly with nut ,Bolts,washers/packing to the existing header without any leakage complete all as directed. Note for :- Rate are deemed to be inclusive for jointing of Submersible Cable upto 6mtr, Steel wire of suitable gauge tied with motor before lowering down upto the depth of motor, reconnecting the delivery pipe line of submersible pump sets to water mains , testing for satisfactory running & continuous flow of water complete all as specified.

M&L for rewinding of electric motor monoblock 3HP 50 HZ 400/415 volts of any make and type with super enameled copper winding wire including bearing bushes and other accessories etc required to make motor functional and testing on load complete all as specified and as directed .

M&L for rewinding of electric motor 5HP , 50 HZ 400/415 volts of non clogging/ mono block/centrifugal elctric motor of any make and type with super enameled copper winding wire including bearing bushes and other accessories etc required to make motor functional and testing on load complete all as specified and as directed .

M&L for rewinding of non clogging sewage Submersible motor by taking out burnt copper winding, cleaning the casing & slots with wire brush & washing with pressure water & shall be dried , rewinding the motor using required gauge of super enameled copper winding wire including replacement of thrust plate , thrust block housing , bush, sleeves. Making the winding leak proof & taking out the electric connection with suitable size of submersible cable up to 07 Meter, Capacity of motor 5 HP complete all as specified and as directed .

M&L for rewinding of fresh water Submersible motor by taking out burnt copper winding, cleaning the casing & slots with wire brush & washing with pressure water & shall be dried , rewinding the motor using required gauge of super enameled copper winding wire, including replacement of thrust plate , thrust block housing , bush, sleeves. Making the winding leak proof & taking out the electric connection with suitable size of submersible cable up to 07 Meter, Capacity of motor 10 HP to 15 HP complete all as specified and as directed .

M&L for repairing and testing of pump centrifugal/mono block/non clogging upto 5 HP of any make and type including welding work, turning, re-metaling of shaft bush bearing, key and other such accessories etc required to make pump functional and testing on load complete all as specified and as directed .

M&L for repairing of pump, bucket type for submersible pumpset suitable for 10HP to 15HP of 13 stages including servicing/repair/replacement of each bucket, sleeves, brass impeller, Thrust plate, bush - bearing of suitable size, glands, rotor rod etc. complete all as specified and directed.

M & L for Fully Automatic Star delta Starter In sheet Enclosure Type MU-2F Motor rating AC-3,Duty 415v, 50 Hz 3 Phase to 15 HP Motor, Relay range of 09-14 A Cat No.SS 96254 as per existing after taking out old U/S. Make: L&T/havells/GE.

Deep Contractor

D P ENTERPRISES

Saini Enterprises