CERTAIN BR REPAIRS TO JOINERIES PLUMBING SANITARY FITINGS INCLUDING PETTY REPAIRS TILING IN OFFICERS MD ACCN AND PERIODICAL SERVICES AND WELCOME MAINTENANCE OF CERTAIN OTM MD ACCN AT 2003 STN UNDER GE AF GURGAON

Amount

Taking down Shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and as directed.

Taking down Chowkat or frames with shutters(without taking off shutters from the frames) exc 1.5 but n.exc 4.00 sqm each complete all as specified and as directed.

Taking down and removing Chowkats or frames not exc. 1.5 sq.m with shutter (without taking off shutters from the frames) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and as directed.

Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

Dismantling Structural Steel or Mild Steel Work of any description including Framed Truss, etc., complete all as specified and as directed.

Dismantling damaged/unserviceable Galvalume, AC and Fiber Sheeting of any gauge and thickness, complete all as specified and as directed.

S&F Aluminium anodized powder coated(minimum thickenss of powder coating 50 micron) three track sliding Window, Shutters (size 45x15mm) i.e two shutter with 4.8 mm thick tinted glass and one with stainless steel wire cloth of 0.36 mm dia and avg width of aperture 1.40 mm and sliding section conmfirming Cat No. 20814(from Jindal) and frame size 101.40x44.50 x1.90 mm etc including all necessary locking arrangement complete all as specified and directed. Aluminium Grill to be provided , etc. complete including necessary Jointing Cleats, Glazing Clips, Rubber Packing, Aluminium Snap Beading, NOTE : (a)Cost of Black/Tinted Sheet Glass, Stainless Steel Wire Cloth, Jointing & Packing Materials, anodized Aluminium Fittings, etc. shall deem to be include in the Quoted Unit Rate. (b)For the purpose of Measurement & Payment all Shutters with Frame shall be considered as One Unit and only front portion shall be measured for payment.

S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate, Filling the frame with cement concrete Type B-0 1:2:4 ( (12.5 mm granded stone aggregates) etc complete all as specified and as directed.

S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate, Filling the frame with cement concrete Type B-0 1:2:4 ( (12.5 mm granded stone aggregates) etc complete all as specified and as directed.

S&F in repairs Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall becovered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottim rail. Penelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 95mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with Ms Squre Tube in opening etc complete all as specified and as directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 35 mm thick 2nd class Hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, guaze etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securiing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a) and fitted to chowkats complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and as directed.

S&F Stainless Steel Butt Hinge 75mm long (weight not less than 60 Gram) and fixed, complete all as specified and as directed.

S&F Cold Rolled Mild Steel Butt Hinge 100mm long medium weight and fixed, complete all as specified and as directed.

S & F aluminium anodised, barrel tower bolts of extruded section 125mm long and fixed complete all as specified and as directed.

S & F aluminium anodised, barrel tower bolts of extruded section 200mm long and fixed complete all as specified and as directed.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of exctruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F Aluminium Handle 100mm long (weight not less than 90 Gram), Cast type, anodised, complete all as specified and as directed.

S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Cast type, anodised, complete all as specified and as directed.

S & F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S & F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M&L for Glazed coloured ceramic tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed .

M&L for Vitirified Ceramic coloured Tiles 10mm thick (Square/Rectangular), Polished, area of each Tile not exc. 0.36 Square Metre in Floors, etc. set and jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 300x300 area of each tile not exceeding 0.11 Sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4 complete all as specified and as directed.

M&L for 25mm thick Cement concrete 1:2:4 type B-O(using 12.5mm graded aggregate) as in flooring, finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for Machine cut Granite Stone Slab (Black in colour) 16-20mm thick, fixed on Kitchen Platform, Floor or on Shelves, laid over and including Cement Screed 15mm thick in Cement Mortar 1:4, cutting and Granite Polishing using White Cement in Joints including rounding Edge of Stone Slab on One Edge, complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore, and connections, including removal to store or under credit schedule complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore, and connections, including removal to store or under credit schedule complete all as specified and as directed.

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F in repairs 15mm bore Bib taps, fancy type chromium plated cast copper alloy with crutch or butterly handle, screwed down, screwed with cup for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs 15mm bore Stop Valve/ angle valve fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends with cup for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S & F in repair 15mm bore brass CP wall mixer with provision for overhead shower with 115mm long bend pipe on upper side, connecting & wall flange fancy type, cast copper alloy,chromium complete all as specified and as directed.

S&F Brass Chromium Plated Central Hole Mixture 15mm bore (dia) without Popup Waste System with 450mm long provided Hoses including Flange suitable for Wash Hand Basin and fixing-in-repairs, complete all as specified and as directed. MAKE : JAQUAR ARI-39001 B or equivalent out of makes specified in list of makes.

S & F in repair single towel rail 450mm long fancy type chromium plated fixed with PVC plug and steel screw complete all as specified and as directed.

M & L in repair for hand shower (health faucet) with 8mm dia 1.20 mm lonf flexible tube and wall hook complete all as specified and as directed.

S & F in repair for PVC conection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S & F in repair Swivel shower of PTMT any colour forfixing with 15mm pipe. (Minimum weight 40gms complete all as specified and as directed.

S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) size 350x475x390 with Trap and Fixing Bolts and Making Good to Floor/ distrubed surfaces and fixed-in-repairs, complete all as specified and as directed. MAKE : HINDUSTAN SANITARYWARE 21027/ JAQUAR CNS-WHT553SN/ PARRYWARE C-0252(S) or equivalent out of makes specified in list of makes.

S&F One Piece Euorpen Water Closet Concealed of size 790x360x650mm Snow White, Soft Close Seat Cover having Twin Flush Fittings and Making Good to Floor/ distrubed Surfaces and fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR SLS-WHT-6851S (WC), or equivalent out of makes specified in list of makes.

S&F Plastic Water Closet Seat Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR CNS-WHT-111N or equivalent out of makes specified in list of makes.

S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. MAKE: CERA 1003 (COUNSEL)/ PARRYWARE C-0406 or equivalent out of makes specified in list of makes.

S&F PVC Flushing Cistern 10 Litre capacity twin flush type White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed. MAKE : CERA (CAMELIA) Cat No. 2603/ PARRYWARE or equivalent out of makes specified in list of makes.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L for Rough cast plaster on brick walls consisting under coat of cement and sand mortar 1:3 not less than 10mmm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed of size 6mm with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even complete all as specified and as directed.

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:6 finished surface even and smooth without using extra cement complete all as specified and as directed. (Note the area includs in this up to 4th stories building )

M&L Rendering (External) 15mm thick in Cement Mortar 1:4 on Brick Walls/Concrete Surfaces upto double storey, mixing with WPC as per Manufactures instruction, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE : WPC shall be Measured and Paid for as ‘Supply only’ separately under appropriate Item.

Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.

M&L for 10mm thick Rendering on ceiling surface fair faces of brick work or concrete sureces in Cement Moratar 1:3 finished surface even and smooth without using extra cement complete all as specified and as directed. (Note the area includs in this up to 4th stories building).

S&F Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description, complete all as specified and as directed.

S&F Looking Mirror 5.0mm thick of size 450x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete all as specified and as directed.

Hacking out old broken glass(any thickness, size, quality or description) from wooden frames or metal frame including punching or drilling out old glazing pin/ spring clip or glazed with oil putty or fixed with window beads complete all as specified and as directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in square n exc 0.5sqm each pane complete all as specified and as directed.

M & L for a coat of alkali resistant over already prepared surface of wall complete all as specified and as directed.

M&L for Providing plaster of paris putty of 1mm thickness on plastered surface to prepare the surface smooth and finishes complete all as specified and as directed.

M&L for preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of Weather Coat Exterior Paint (in Camuflage/Plain pattern as ordered) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparing old Distempered surfaces of Walls by brooming down or steel wire brushing and scraping down and filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Distemper Oil Emulsion (as approved), complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one Coat of Distemper Oil Emulsion on ceiling complete all as specified and as directed.

M & L for preparing for new plaster surface and applying two coat of distemper oil emulsion on ceiling surface with roller brush complete all as specified and as directed.

M&L for preparing new Plastered surfaces of Walls by applying Wall Care Putty 1 to 1.5 mm thick including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Primer, complete all as specified and as directed.

M&L for preparing newly Plastered surfaces of Walls by applying Wall Putty 1 to 1.5 mm thick , cutting/rubbing to obtained a Smooth Surface and applying Two Coats of Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparing old Decorated/Treated Plastered surfaces of Walls by brooming down or steel wire brushing and scraping down and applying Two Coats of Weather Coat Exterior Paint (in Camuflage/Plain pattern as ordered) with approved Tint (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed.

M&L for Preparing old painted surfaces of wood of any description, not otherwise described, over 10cm width or girth and one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparing old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enemal paint complete all as specified and as directed.

M&L for complete removal of existing treatment on wall and finishing with textured interior paint of required shade and applying two coats @3.28 ltr/10 Sqm over and including priming coat of primer complete all as specified and as directed.

S&F 75mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade with rubber ring joints fixed to walls with MS Clamp dash true nut and bolt complete all as specified and as directed.

S & F 75mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed

S&F 110mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade with rubber ring joints fixed to walls with MS Clamp dash true nut and bolt complete all as specified and as directed.

S & F 110mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed.

M&L for rendering 15 mm thick in CM (1:3) mixed with water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement in sunken portion of toilet etc complete all as specified and as directed. Note: WPC will be measured and paid separtely

M&L for two coat of painting with Dr Fixit fast Flex (or equivalent) water proofing liquid including preparation of new plastered surfaces complete all as specified and as directed.

M&L for cement concrete 1:5:10 type E-2 using 20mm granded crushed Brick aggregates as in sunken portion of WC etc complete all as specified and as directed

Taking down PVC/cast iron pipes any bore including fittings of any dia with cement or lead joint fixed to walls or laid in trenches complete for refixing or replacement complete all as specified and as directed.

Supply and fix Godrej pattern mild steel cup board with shutter made out of 18 guage M.S. sheet 60cm depth sides incl with back & 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long. The cost of hold fasts & grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured) complete all as specified and as directed.

M&L for Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 250 Litre and not exc. 500 Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position and writing Letters "CLEANED ON DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and as directed.

M&L for Steel Work in Tubular Trusses including Special shaped Washer etc. complete using ERW or Induction Butt Welded Tubes, confirming to IS-1161-1979 Grade-240, complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F in repair Coloured PVC Board (weight not less than 10kg/Sqm) in Door, Shelves for Cup Boards or Kitchen Cabinets, one side laminated, one side plain 18 mm thick as required, jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws,including Locking Arrangements, complete all as specified and as directed.

S&F in repair auto close hinge/Frog hinges on cabinet hinges by making adequate hole in 18 mm board from inside and fixed to cupoard shutter and frame by screw, complete all as specified and as directed.

S&F Stainless Steel Silver chrome Door Handle 100mm long, screwed from inside the Shutter complete all as specified and as directed.

S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed incl Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr complete all as specified and as directed.

S&F Towel Ring, Round in shape, Chromoum Plated and fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR AQN-7721 or equivalent out of makes specified in list of makes.

S&F Glass Shelf (Bath Tray) Accessories 45x15 Cm in size and fixed-in-repairs, complete all as specified and as directed.

S&F Corner Glass Shelf single Decker (Triangular shape) of size 30 Cm and fixed-in-repairs, complete all as specified and as directed. MAKE : JAQUAR CAN- 1173 or equivalent out of makes specified in list of makes.

S&F single lever 4 way/ 2 inlet wall mount chromium plated diverter all as specified and as directed MAKE : JAQUAR CAN- 1173 or equivalent out of makes specified in list of makes.

Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

M&L for Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L for Brick work with Sub-Class ‘B’ Bricks but except Bricks (Serviceable Bricks obtained from Item No. 93 here-in-before) including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

Removing vegetation growth/shrubs(girth up to 30 CM), cutting in brick wall/concrete surface upto double storey building carefully without damaging the existing soil, vent, water supply pipe and removing roots of plants completely and filling the gaps with PCC 1:2:4, Type B-0 finished with existing surface including all scaffolding ladder etc as required surface are n.exc. 0.36 Sqm each complete all as specified and directed.

M&L for Rendering (Internal) 12mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L for preparing New Plastered Surfaces of Walls including rubbing down with Sand Paper to obtain a smooth finish surface and applying Two Coats of Distemper Oil Emulsion (as approved) , complete all as specified and as directed.

M&L for complete removal of old Decorated/Treated Plastered surfaces of Walls by complete removal of existing treatment by skilled labour complete all as specified . NOTE: Area includes in this items upto G+3 stories of building. scaffolding and other arrangement to be done by contractor, nothing extra shall be paid to contractor complete all as specified and as directed.

M&L for 1-2mm thick white cement base wall care putty( Multipurpose mixer shall shall be used for uniform & proper mixing of wall care putty) and making the surface smooth etc, complete all as specified and as directed. NOTE: Area includes in this items upto G+3 stories of building. scaffolding and other arrangement to be done by contractor, nothing extra shall be paid to contractor.

M&L for complete removal of existing treatment on wall and finishing with textured premium acrylic emulsion interior paint of required shade and applying two coats @3.28 ltr/10 Sqm over and including priming coat of primer complete all as specified and directed.

M&L for preparing old painted Concrete Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M/S ujjwal associates

SHAKSHI ENTERPRISES

Shakashi Construction Co.