REPAIRS TO JOINERY, ROLLING SHUTTERS, CLEANING OF TANKS, REMOVAL VEGETATION GROWTH ETC OF CERTAIN MD AND OTM ACCN UNDER GARRISON ENGINEER GUWAHATI

Amount

Taking down chowkats or frame n exc 1.5 sqm each including shutter (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frame exc 1.5 sqm but n exc 4 sqm each including shutter (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description n.exc 1 sqm each complete all as specified and directed.

Taking down shutter of exc 1 and n.exc 2 Sqm each complete all as specified and directed.

Supply & fixing as in repair to aluminium doors, windows, ventilators etc by replacing its faulty parts to bring its functional conditions complete all as specified and directed.

Supply & fixing 2nd class hard wood plain solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply & fixing 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commerical type on both sides complete all as specified and directed.

Supply & fixing 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I section 8, clause 8.24(a) complete all as specified and directed.

Supply & fixing 30 mm thick 2nd class hard wood glazed and skeleton shutters, divided into squres open rebated and prepared to receive glass, gauze, etc, (with sash bars),edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters, if windows , ventilators, etc are provided with stiles and rails as specified in SSR Part -I. section 8, clause 8.24(b) complete all as specified and directed.

Supply & fixing solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube as per per specification complete all as specified and as directed.

Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

Supply & fixing colour coated aluminium anodised frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes complete all as specified and directed.

Supply & fixing colour coated aluminium anodised doors shutters including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:-(i) Labour charges for fixing of glass/wire guage is inclusive in the unit rate quoted. Glass/Wire Guage shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Supply & fixing colour coated aluminium anodised windows/ventilators/partitions any type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

Dismantling MS work of any description complete all as specified and as directed

Material & labour for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed

Supply & fixing 4 mm thick tinted glass and fixed to aluminium frame work in squares not exc 0.50 sqm in each pane complete all as specified and as directed.

All as per item No.17.00 here-in-above but 5.5mm thick but exceeding 0.50 Sqm complete all as specified and directed.

Supply & fixing prelaminated particle board 12mm thick, interior grade, prelaminated both side with decorative choice lamination duly fixed with clips to aluminium frame work complete all as specified and as directed.

Supply & fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and as directed.

All as per item No.20.00 here-in-above but as in repair complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint (1st quality) over a priming coat of pink primer complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete, all as specified and as directed.

Supply & fixing 3 mm thick sheet glass ordinary quality and glazing with beads fixed with metal panel pins or spring clips in squares not exc 0.50 sqm in each pane complete, all as specified and as directed.

Supply & fixing 200mm long aluminium anodized, barrel tower bolts of extruded section and fixed, complete all as specified.

All as per item No.26.00 here-in-above but 125 mm long

Material & labour for 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast, cast section and fixing bolts and sliding bolts of cost aluminium alloy complete all as specified.

Supply & fixing 150 mm aluminum handle cast type anodized, complete all as specified.

All as per item No.29.00 here-in-above but 100mm size

Supply only butt hinges, medium weight cold rolled, mild steel of size 100 mm complete, all as specified and as directed.

Demolition of brickwork built in cement of any mix complete all as specified and as directed.

Material & labour for Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in full brick thick walls, built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster from brick or stone walls, etc including raking out joints, haking for key, scrubbing down with water, etc complete all as specified.

Material & labour for for rendering 15 mm thick in two layers (10mm + 5mm) externally in cement mortar (1:6) on fair faces of brick work or concrete surfaces mixed with water proofing compound @ 200ml/50kg of cement on top layer of 5mm thick as per manufacturer’s instructions complete all as specified and as directed. (Note : WPC measured and paid separately as ‘Supply only’)

Supply only liquid water proofing compound

Material & labour for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

Material & labour for preparation of new surfaces of walls and applying two coat of distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete all as specified and as directed

Material & labour for applying two coats of cement based paint after preparation of newly plastered wall surfaces complete complete all as specified and as directed

Taking up or down 15 mm bore GI pipe and connection complete all as specified and as directed.

Supply & fixing 15 mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and laid in floors including specified and directed.

Taking up or down 20 mm bore GI pipe and connection complete all as specified and as directed.

Supply & fixing 20 mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and lain in floors including taking down complete all as specified and as directed.

Taking up or down 25 mm bore GI pipe and connection complete all as specified and as directed.

Supply & fixing 25 mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and lain in floors including taking down complete all as specified and as directed.

Supply and fixing 500 liters rotational moulded polyethylene water storage tank, multi layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I including dismantling of old existing water tank and removing from site complete all as directed.

Supply and fixing 1000 liters rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I including dismantling of old existing water tank and removing from site complete all as directed.

Supply & fixing as in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms .) complete all as specified and as directed

Dismantling Corrugated steel Sheets any gauge, thickness, Nainital or Similar Pattern Roof Coverings, complete all as directed.

Material & labour for Pre-painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws along with rubber washer, fixed in any position complete all as specified and as directed.

Material & labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed.

Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified.

Material & labour for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection/paving, laid in alternate bays complete all as specified and as directed.

Supply, fixing and errecteing in position as in repairs steel rolling shutters with thickness of laths 1.25 mm, push pull or manual type with out ball bearing including top cover, bottom plate,anchoring rod, hasp and staple, mild steel handle including applying one shop coat of red oxide primer, erected in position complete all as directed. Note: Net area of opening shall be measured for purpose of payment.

Supply & fixing saftey lever locks mild steel with 4 levers for rolling shutters all as specified and as directed

Material & labour for preparing old steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Taking down and opening the existing Steel rolling shutter, pull push type, not exc 12 sqm each in area as clear opening, including hood cover, cleaning the sides guides, suspended shaft, anti guide channels, straightening/rolling shaft and replacement of bolts & nuts after greasing all the moving parts of rolling shutter and refixing in the same opening to make it for smooth functioning complete all as specified & as directed.

All as per item No.57.00 here-in-above above but gear operated shutter area exc 12 Sqm but not exc 25 sqm each including adjustment of gear assembly.

M&L for cleaning and degermination of water storage tank 500 Ltr capacitr of any description and in any position and making locking arrengment to tank cover comprising following seven stages of operation complete all as under (i) Drain out the water by using exit valve or our own high capacity dewatering system (ii) Cleaning all the algae formation inside the tank by using TERBAC G10/SODIUM HYPOCHLORIDE a laboratory tested branded chemical of the company and scrubbing the walls of the tanks. (iii) Fresh water cleaning by high speed jet pump with pressure 5 PSI. (iv) First bacteria screening is Sterilization by using TERBAC G5/ SODIUM HYPOCHLORIDE & HALOGEN COMPOUND a Laboratory certified branded halogen compound, test certificate of TERBAC G5/ SODIUM HYPOCHLORIDE & HALOGEN COMPOUND from government laboratory mentioning suitability for sterilization should be submitted to the office before using for sterilization. (v) Cleaning the floor of the water tank by heavy duty industrial vacuum cleaner. Item Continued as 59.01

(vi) Second bacteria screening and sterilizing method by using ultra violet ray Ejector covering 360 degree with in the tank and kills all suspended bacteria. (vii) Cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agent TERBAC- G65/ (CLASS-1) HYDROGEN PEROXIDE. Test certificate of Terbac-G65 From Government Laboratory mentioning suitability for sterilization should be submitted to the office before using for Sterilization. NOTE: Make of the material shall be approved by HQ E-in-C's New Delhi branch / HQ CEEC Kolkata or any other Command/ADG

All as per item No.59.00 here-in-above but 1000 Ltr capacity

All as per item No.59.00 here-in-above but 2000 Ltr capacity

All as per item No.59.00 here-in-above but 5000 Ltr capacity

Material & labour for removal of wild growth / plants /shrubs on external surface of bldgs at any height upto root level including making good the distrubed surface in cement mortar 1:4 with water proofing compound as per manufacturers instructions complete all as directed.

Supply only PVC cover for 500 Ltr PVC water storage tank

Supply only PVC cover for 1000 Ltr PVC water storage tank

DEEP CONSTRUCTION (BID ID -3136883)

M/S RAJA CONSTRUCTION (BID ID -3138848)

D.B ENTERPRISE (BID ID -3138601)

M/s JK Jangid and Company (BID ID -3138516)

SANJAY KRISHNA HAZARIKA (BID ID -3138120)

M/S SEWAK SINGH (BID ID -3135944)