Modernization works to the Subdivision cum Urban Sathankulam Distribution Section office building at 110 / 33-11 KV Sathankulam SS

Amount

Dismantling the existiing one course of pressed tile roof finish and clearing away the debrises away from the site as directed by the Engineer at site.

Dismantling and clear away the plain cement concrete with floor finish as directed by the Engineer at site.

Dismantling Reinforced cement concrete and reitreving from steels & clearing away the debrises from the site as directed by the Engineer at site.

Dismantling the existion brick / stone masonry in cement mortar wall upto 3 metres height including cost of labour, lead, lift,etc., complete and remove the dismantling materials away from the site or reuse the available materials for low lying areas as directed by the Engineer at site.

Dismantling the existing wooden Door / window including fastening etc., complete

P.C.C.1:4:8 for foundation & flooring etc., using 40mm machine crushed metal including cost of all materials, labour, lead, lift etc., complete by using M.Sand & OPC 53 Grade cement.

Brick work in CM 1:5 using fly ash bricks including cost of all materials, labours, lead, lift, curing,etc., complete by using M.Sand & OPC 53 Grade cement.

Supplying & providing TMT rods including cutting, bending, tying & fixing in position as per specification including binding wires, cost of all other materials, labours, lead, lift, etc. complete.

Providing centering and shuttering for RCC works upto 3m heights using M.S. sheets of size 90 x 60 cm with BG 10 guage stiffened with welded M.S. angles of size 25 x 25 x 3 mm laid over silver oak scantlings of size 10 x 6.50 cm at 90 cm c/c & supported by casurina props 10 to 13 cm. dia at 75 cm c/c complying with standard specifications including cost of all materials, labours, lead, lift, etc. complete.

Providing RCC 1:1.5:3 with 12 to 20mm machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete - excluding cost of reinforcement and form work

Terrace flooring of one course of pressed tiles 230 x 230 x 20mm over CM 1:3, 20mm thk. mixed with crude oil 10% by weight of cement and pointing with the same oiled mortar 1:3 with required slope over RCC roof slab including cost of all materials, labours, lead, lift, crude oil, curing, etc., complete by using P.Sand & OPC 53 Grade cement.

Plastering with cement mortar 1:3,12 mm thick including Cost of all materials, labour,lead,lift,etc.,complete by using P.Sand & OPC 53 Grade cement.

Plastering in walls with C.M 1:5, 12 mm thick including cost of all materials, labours,lead, lift,curing,etc., complete by using P.Sand & OPC 53 Grade cement.

Floor finishing with C.M 1:3, 20 mm thick including cost of all materials, labours, lead, lift, curing, etc., complete by using P.Sand & OPC 53 Grade cement.

Flooring with approved quality of Ceramic or equivalent tiles in cement mortar 1:3 - 20 mm thick including pointing with white cement using 0.40 kg / m², finishing the joints, including cost of all materials, lead, lift, labour etc., complete by using P.Sand & OPC 53 Grade cement.

Supplying and fixing in position of single leaf door with outer frame of size 40 x 40 x 6 mm M.S Angle and door shutter frame with 35 x 35 x 6mm M.S Angle with M.S Flat 32 x 3mm and using 16 G M.S. Sheet including cost of all materials, labour charges, lead, lift,bolt & nuts for fixing the particle board etc., complete.

Providing 3mm thk. pin headed glass for window panels including cost of plain glass, labour charges, nails, lead, lift, etc, complete.

White washing two coats over the plastered ceiling surface with shell lime including cost of all materials, labours, lead, lift, scaffolding, etc. complete.

Providing two coats of oil bound distemper of approved quality, brand & colour for inner wall surfaces over a coat of white cement with Alkali Resistant Distemper primer including cost of all materials, scaffolding charges, labours, lead, lift, curing, etc., complete.

Painting the outer walls with two coats of Weather coat ( emulsion) of first class quality paint and of approved colour over a priming coat including through scrapping,clean removal of dirt etc., complete and including necessary plaster of paris,putty wherever required,including cost of all materials lead,lift etc.,complete.

Painting the wood work with one coat of ready mixed synthetic enamal paint including cost of all materials,labour, lead, lift,etc., complete.

Providing of 110 mm dia ( 6 kg / cm2 ) PVC approval quality and best vaniety ( Finolex or equalant ) pipe including specials, T.W plugs clamps, screws,lead, lift etc complete.

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point ( For electronic regulator).

Wiring with 2 x 1.50 sq.mm( 22 / 0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall & ceiling with PVC accessories with 150 x 100 x 75 mm TW switch box in flush with wall with 3mm thk. hylem sheet cover for 15A 3 pin flush type non inter locking CS plug with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point.

Supply and fixing of single box type 4' x 40 W LED florescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting.

Supplying and fixing in position of best Indian type white water closet of size 580 x 440 mm (Oriya pan) with P or S traps, both sides glazed with a pair of foot rests with necessary brick jelly concrete in lime mortar 1:2, complying with standard specifications including cost of all materials, labour, transporting with necessary fittings, lead, lift, etc., complete by using P.Sand & OPC 53 Grade cement.