Converting the old MRD room as Biochemistry Laboratory in the First Floor of Radiology Block, IGGGH and PGI, Puducherry.

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering, shuttering , finsishing and reinforcement - All work upto plinth level 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc and removal of form for - Suspended floors , roofs , landings , balconies and access platform

Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level - Thermo-Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level upto floor V level - cement mortar 1:4 (1 cement : 4 coarse sand)

Provding and laying autoclaved aerated cement blocks masonry with 100mm thick AAC blocks in superstructure above plinth level upto floor five level in cement mortar 1:4 (1 cement : 4 coarse sand) . The rate includes providing and placing in position 2 nos 6 mm dia M.S.bars at every third course of masonry work.

Providing and fixing 18mm thick gang saw cut, mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels - Granite of any colour and shade - Area of slab upto 0.50 sqm.

Providing edge moulding to 18mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete - Granite work.

Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete - Fixed to openings / wooden frames with rawl plugs screws etc.

Providing and fixing ISI marked powder coating sliding door bolts with nuts and screws etc.complte - 250 X 16 mm.

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc.complete - 125 x64 x1.90 mm.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS :3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ), with necessary accessories and screws etc complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868), transparent or dyed to required colour or shade, with necessary screws etc. Complete - 200 x10 mm.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc, complete - 125 mm.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc complete - Twin rubber stopper.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50m in height dimension comprising of uPVC multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I. fastners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shyall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality , all complete as per approved drawing.(Single / double glass panes, wire mesh and silicon sealent shall be paid separately) - Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels ) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 + or - 0.2 mm and single glazing bead of appropriate dimension.(Area of window upto 1.75 sqm) - sliding window size 1.20x1.35 m.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) , of approved make (Jhonson / Asian / Somany / Nitco) in all colours, shades of size 300 x 600 mm as approved in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of matching shade complete - size 300x600 mm.

Providing and laying fully vitrified floor tiles of size 600 x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 of approved make (Nitco / Rak / Johnson /Asian) in all colours and shades , laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete - size of tile 600 x600 mm.

Grouting the joints of flooring tiles having joints of 3mm width,using epoxy grout mix of 0.70kg of organic coated filler of desired shade (0.10kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete - size of tile 600x600 mm.

Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.

Providing and fixing PVC corner beading of required size to suit the thickness of the wall tile at the corner joints of dado works.

15 mm cement plaster on rough side of single or halfbrick wall finished with a floating coat of neat cement of mix - 1:4 (1 cement : 4 fine sand).

6mm cement plaster of mix 1:3 (1 cement : 3 fine sand).

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - with cement mortar 1:4 (1 cement : 4fine sand).

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead - of area beyond 3 sq.metres.

Providing and fixing white vitreous china laboratory sink with C.I.brackets, C.P.brass chain with rubber plug, 40mm C.P.brass waste and 40mm C.P.brass trap with necessary C.P.brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required - size 600x450x200 mm.

Providing and fixing ASTM pipes including all ASTM plain& brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fitting with one step ASTM solvent cement and testing of joints complete (Internal work exposed on wall) - 32mm nominal outer dia pipes.

Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fitting with one step ASTM solvent cement and the cost of cutting chases and making good the same including testing of joints complete (Concealed work including cutting chases and making good the walls etc.) - 25 mm nominal outer dia pipes.

Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes (type - B) conforming to IS : 13592- 1992 including jointing with seal ring conformation to IS : 5382 leaving 10mm gap for thermal expansion - single socked pipes -110mm diametre.

Providing and fixing on wall face / column face unplasticised - PVC moulded fittings / accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735 - 1999 including jointing with seal ring conforming to IS :5382 leaving 10mm gap for thermal expansion - Single tee without door - 110 x110x110mm.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws, all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of5.50 mm thickness.

Providing and fixing 100 mm brass locks (best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete.

Filling the gap in between aluminium / stone / wood frame and adjacent RCC / Brick / Stone / Wood / Ceramic / Gypsum work by providing weather / structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings complete, complying to ASTM C920 , DIN 18540-F & ISO 11600 - upto 20mm depth and 20mm width.

Hacking/ Chipping the existing cement concrete flooring top surface with power operated hacking machine so as to make the surface ready for laying kota stone flooring with cement mortar base. The rate includes the cost of labour, hire charge for machineries, disposal of debries, transportation etc, complete all as directed by the Engineer-in-charge.

Providing and fixing special type stainless steel laboratory swan neck type 3 way tap including fixing the tap in position as directed by the Engineer-in-charge.

Providing and Fixing pre painted G.I sheet of size 595x595mm with interlocking metal grid of hot dipped galvanized steel sections with pre-finished in baked poleyster paint consisting of main runners of size 24x33mm T-section made of 0.27mm thick (minimum) sheet spaced at 595mm centre to centre and secondary T-hot dipped galvanized steel section of size 28x24mm made of 0.27mm thick (minimum) sheet with pre finished in baked polyester paint to be interlocked in between main runner at 595mm centre to centre to form over all grid of 595x595mm laying G.I sheet false ceiling tiles in the grid suspended by hanger rods 60cm long with bolts at 1.2m C/C including cutting/ making opening of service like fittings, diffusers, grills, smoke detectors etc, including providing necessary wall angle of size 19x19x0.45mm on all four sides including scaffolding etc complete as directed by the Engineer-in-charge Ceiling upo 6.5m heights.

Providing and fixing 8mm thick prelaminated Bison Board flat pressed three layer or graded wood particle board conforming to IS:12823 grade-I type-II in paneling fixed in aluminium door, window shutters and partition frames with C.P brass/ stainless steel screws etc., complete as per architectural drawings perlaminated particle board with decorative lamination on one side and balancing lamination on other side all as directed by the Engineer-in-charge.

Providing and fixing apartment GI clamps of approved design of size 250mm by means of 'U' bolt and nuts kod screws, bushes including welding charges, labour charges transportation charges etc., complete. The rate includes all taxes.