SPL REPAIR TO MD ACCN BLDG NO P-20 AND MD ACCN BLDG NO T-23 AT AKHNOOR MIL STN UNDER GE SOUTH AKHNOOR.

Dismantling of old/ damaged existing roof treatment along with PCC tiles/ concrete and cleaning all waste and dirt by wire mesh, picking, sweeping and washing down with water to remove dust, etc, and removal of all material out side the cant area, complete all as specified and as directed. (a) Applying one coat of neat cement slurry with 3.0 Kg of cement per Sqm on cleaned surfaces of roof, evenly, and screed bed/rendering 10mm thick on fair faces of brick work or concrete surfaces, in cement mortar 1:4, including mixing water proofing compound @ 3% by weight in cement, rendering is to be finished even and smooth (without using extra lime or cement) . (b) Applying one coat of bituminous primer conforming to IS: 3384, applied @0.40 Kg/ Sqm on the prepared surface. (c) After the primed surface has dried, apply one coat of hot blown bitumen of 85/25 grade, conforming to IS:702, applied @1.20Kg/ Sqm on prepared surfaces of roof. (d) Provide APP (Ataxic Poly Propylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density polyethylene film, weight not less than 3.0 Kg/ Sqm, centre core is sandwiched on both sides by high quality polymeric mix with properties of high softening point, high heat resistance and cold resistivity to make it ideal for all water proofing treatment, with polymeric mix protection on both sides with 20 micron HMHDPE film. APP membrane wil be laid minimum end lap of 150 mm and side lap of 75 mm bonded with hot blown bitumen.

M&L for repairs to sunken floor/ slab with the following specifications:- (a) M&L for repair demolition of PCC and taking out old brick bat filling and taking down plaster upto skirting level and roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b) All pipe passing through the wall of sunken floor shall be laid before the water proofing treatment is carried out and one number 50mm dia 500mm long medium grade GI pipe spout with SS wire gauge on inside mouth shall be provided. (c) Rendering on uneven surface with 10mm thick cement mortar 1:4, mixed with IWPC to make it even. (d) All junction of side wall where pipes are passing through shall be sealed with epoxy putty. (e) After cleaning apply three coat of polymer modified cementious water proof coating as per manufacturerer instruction to bottom and vertical sides upto skirting height of the floors, proportion & applications as per manufacturer instruction. (f) The water proofed area shall be tested by filling water for at least 03 days. In case any leakage is noticed water proofing treatment shall be re-done and re-tested. (g) The sunken floor and sides of wall upto skirting height shall be plastered with 15mm thick cement mortar 1:4 mixed with IWPC @ 3% by weight including rounding at corner and junction sloping towards spout.

item No. 3 cont.... (h) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 type C-0 all around. (j) The sunken floor shall be filled with PCC 1:5:10 type E-2 (1 cement : 5 coarse sand : 10 graded brick aggregates 40mm nominal size) complete. (k) Base of 25mm thick PCC 1:2:4 type B-0 to receive screed bed and tiles. NOTES:- Rates of below mentioned elements is included in the said item. (i) IWPC included (ii) GI pipe of dia 50mm, 500mm long, stainless steel wire mesh suitable size including this item. (iii) For payment purpose, floor area of sunken shall be measured.

S&F structural steel work as in roof trusses any description of steel member purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality A, including dismantling old structural steel work like doors, gates, frame, truss etc, of any description, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nanital or similar pattern roof coverings including ridges as in roof covering, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self drilling & tapping screw with neoprene and EPDM washer, complete all as specified and directed.

M&L pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self drilling & tapping screw with neoprene and EPDM washers, complete all as specified and directed.

S&F in position suspended false ceiling system using E-grid suspended ceiling and system. The size of Grid shall be 600x600mm with GI framework with main runner 38x24mm, cross tee 25x24mm and wall angle 24x24mm using 4mm thick designer E-board ceiling as per relevant IS and fixing in the grid suspended ceiling grid system duly suspended by GI wire hanger from the purlin or from the roof using fastners etc. and including taking down old ceiling, complete all as specified and directed.

Demolition brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all specified and directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified and as directed .

Taking down cement plaster from brick , stone walls or ceiling including racking out joints hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for rendering 15mm thick cement plaster with cement mortar 1:4 on fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement, mixed with water proofing compound @ 3% by weight of cement as per manufacturer's instruction, complete all as specified and directed. (Note: cost of WPC included in this item).

M&L for rendering 10 mm thick cement plaster with cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar 1:4 on ceiling of on concrete surfaces, finishing the surface even & smooth without using extra cement, complete all as specified and as directed .

M&L for preparation of new plastered and unplastered surfaces of walls and applying two coat of oil bound distemper over a coat of primer with 1mm thick wall care putty, complete all as specified and directed.

M&L for preparation of old plastered and unplastered surfaces of walls and applying two coat of oil bound distemper, including complete removal of exising treatment of old surfaces of walls, complete all as specified and directed.

M&L for preparation of new plastered and unplastered surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV Resistance as per IS 15489:2004, alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new surfaces, complete all as speicfied and directed.

M&L for preparation of old plastered and unplastered surfaces of walls and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV Resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over old surfaces, complete all as speicfied and directed.

M&L for preparation of old decorated surface of ceiling and apply two coat of oil bound distemper, complete all as specified and as directed.

M&L for preparation of new plastered surface on ceiling and apply two coat of oil bound distemper over a coat of primer, complete all as specified and as directed.

Repairs to balcony/Facia and soffit of chajjas etc by taking down old plaster and rendering 15 to 20 mm thick to match with the existing thickness in cement mortar 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqcm in width or girth including preparatoin of suface and two coat of cement base paint as required over one coat of primer/scaffolding work upto four story building, complete all as specified and as directed.

Demolition of reinforced concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work. reinforcement cut as required to facilitate demolition,complete all specified and directed.

M&L for reinforcement cement concrete (nominal mix) type B1 1:2:4 (20mm graded crushed stone aggregatge) for Chajjas/Balcony/Landing work/kitchen slab, if any, complete all as specified and as directed.

S&F for mild steel bars 10mm dia TMT Bars and over cut to length bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with and includig mild steel wire not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for formwork to sides and soffits/faccia of floor or roof beams, beam haunchings, girders, bressummers, lintels, chajja, cantilevers, shelves including sup-ports, overhangs, etc., complete all as specified and directed.

M&L reinforcement cement concrete (nominal mix) type B1, 1:2:4 (20 mm crushed stone aggregatge) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc., complete all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Vertical , Horizontal or sloping) sides including sup- ports, overhangs, for fair finished surface of concrete etc., complete all as specified and directed.

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons, walls etc., complete all as specified and directed.

M&L Green Marble work 18 to 20mm thick (tabel rubbed and polished) at kitchen platform (Single Piece of slab for cooking Plateform)and like in cement mortar (1:4) including pointing in white cment 1:2 using marble dust with admixture of pigment to match with marble shade of Green marble and moulding of edges including 15mm thick screed bed/base in cement mortar 1:4, complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 15mm thick screed bed/bedding layers in cement and sand mortar 1:4, complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in cement and sand mortar 1:4, finishes even and rough, complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick (square /rectangular) polished, area of each tile not exceeding 0.36 sqm laid as in floors etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match in light shade incl 15mm thick screed bed/base in cement and sand mortar 1:4, complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick (square /rectangular) polished, area of each tile not exceeding 0.36 sqm as in skirting etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match in light shade including 10mm thick rendering in cement and sand mortar 1:4 finished the surface even and rough, complete all as specified and directed.

M&L glazed ceramic tile 450x300x6-7mm thick (coloured) on vertical surfaces such as dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering (Broomed) in cement and sand mortar 1:4, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-22mm thick, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade or the slab including rubbing and polishing complete including 20 mm thick screed bed in cement concrete 1:4 for laying Kota Stone, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-22mm thick as in riser of steps, skirting, dado and pillar ,over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade or the slab including rubbing and polishing complete including 10mm thick plaster in cement concrete 1:3 for laying Kota Stone, complete all as specified and directed.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each, complete all as specified and directed.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) nexc 1.50 sqm, complete all as specified and directed.

M&L pressed steel frames of sizes 125 x 60 mm for doors with one or more rebates made of 1.25mm thick cold rolled mild steel sheet including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, complete all as specified and directed.

M&L pressed steel frames of sizes 105 x 60 mm for doors with one or more rebates made of 1.25mm thick cold rolled mild steel sheet including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, complete all as specified and directed.

M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struk inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointing together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed with 75mm MS screw including making good disturbed surfaces of wall to match existing shade, complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate as in filling of pressed steel frame, complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc., complete all as specified and as directed.

S&F 35 mm thick flush shutter factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides with one face covered with decorative face veneer with lipping/frame to match, complete all as specified and as directed .

S&F 30 mm thick 2nd class hard wood glazed shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted wifth cut and mitred beads for securing glass, gauge etc, sizes of members of shutters as specified in SSR Part I, Sec-8, clause 8.24(a), complete all as specified and directed.

S&F mild steel spring stove enameled black for door 300mm, ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, complete all as specified and as directed.

S&F 100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and as directed.

S&F 150 mm long Extruded aluminium alloy handle, cast type, anodised ISI marked, complete all as specified and as directed.

S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section ISI marked, complete all as specified and as directed.

S& F hasp and staple 100 mm long safety type of aluminium anodised with hinge pin including bolt to hinge plate and fixed with screw as a cupboard locker, complete all as specified and as directed.

S&F 75 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (ISI marked), complete all as specified and as directed.

S&F for factory made steel window, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter made out of 1.25 mm thick mild steel sheet made with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified and as shown in drawing No- CEUZ/TD-1517/15, sheet No- 1/3 to 3/3 and as directed by Engineer-In-Charge. Note :- Cost of window shall include all members and spare parts as elaborated in the drwaing and in the specifications and nothing shall be paid extra seperately.

S&F stainless steel wire cloth 0.46mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed.

S&F glazing glass sheet, 3mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

S&F 3 mm thick figured glass sheet ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane, sheet glass is obscured or froste, on one side, complete all as specified and as directed.

S&F floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue, nodised, with hard drawn steel spring, fixed in bottom body of door, complete all as specified and directed.

M&L pre laminated particle board, 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination and all around of 6 mm thick beading after cutting the board in shape and size fixed with glue and nails piano hinge of board width and screw to timber frame work fixed in repair as cupboard shelve and shutter, complete all as specified and as directed.

S&F in repairs curtain rod, 20 mm dia mild steel chromium plated fixed with brakets, stops etc and providing PVC ring at 15cm distance, complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier, complete all as specified and as directed.

M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Demolition of concrete in ground floor and paving n.exc 15cm thickness (below or above ground level, complete all as specified and directed.

Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 50 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and smooth on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 grade and 3 parts of sand ( all by weight), complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank of 1000 Litres capacity, (cylindrical vertical tanks with closed top) (White in Colour and three layered) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank, complete all as specified and as directed.

S&F fixing in repair 15 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed high pressure with crutch or butterfly handle, complete all as specified and as directed.

S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed high pressure with crutch or butterfly handle, complete all as specified and as directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe or brass ferrule, 20mm bore, complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections, complete all as specified and as directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, and making good to dismantled/damaged floor to match the shade, complete all as specified and as directed.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated hinging device, complete all as specified and as directed.

S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and (ABS) wall hook including making connections and fixed in position, complete all as specified and as directed.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including connection to trap, flushing pipe, anti-syphonage pipe, etc. and concrete bedding layer, complete all as specified and as directed .

S&F vitreous china wash basin, white, flat back, size 550x400mm full pedestal including 15 mm bore brass CP Wash Basin mixer for mixing hot and cold water screwed down for iron pipe including 32mm waste coupling,waste pipe, cutting for and pinning in ends of brackets or erecting stand porcelain stopper a pair of 32mm MS brackets, complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts 600 mm long, complete all as specified and as directed.

S&F in repair MS chromium plated towel rail 20mm dia 'D' type 60 cm long between flanges, complete all as specified and as directed.

S&F in repair ABS chromium plated shower roses 125 mm size with or without swivel joints, including 300mm long shower arm ABS (CP) fixing to steel pipe or union for fixing with 15 mm pipe, complete all as specified and as directed.

S&F in repair PVC (SWR) pipes, 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, single socketed, in any length with rubber ring joints, laid in floors, complete all as specified and as directed .

S&F in repair PVC (SWR) pipes, 75mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, single socketed, in any length with rubber ring joints, laid in floors, complete all as specified and as directed .

S&F in repair PVC (SWR) bends of 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, any radius, fixing with adhesive, complete all as specified and as directed .

S&F in repair PVC (SWR) bends of 75mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, any radius, fixing with adhesive, complete all as specified and as directed .

S&F in repair PVC (SWR) pipes, 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed .

S&F in repair PVC (SWR) pipes, 75mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed .

S&F in repair PVC branch piece 110mm single (Single Y/ Single T) equal or unequal ordinary or inverted (spigot or socket type) with paralled branches, complete all as specified and directed.

S&F in repair PVC (SWR) 75mm bore junction single, ( Single T ), equal or unequal with access door, complete all as specified and directed.

S&F in repair PVC (SWR) 110mm bore junction single, ( Single T ), equal or unequal with access door, complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 75mm bore, complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 110mm bore, complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F in repair plate rack made of stainless steel 0.8mm thick overall size 900x600mm, complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and and waste pipe 32mm bore including bedding in cement mortar to dwarf wall or including fixing MS cantileverbrackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and as directed.

S&F in repair angle valves/stop cock, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe, complete all as specified and as directed.

S&F in repair 15 mm CP Bib taps (long body) fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair CP Brass wall mixture (with telephonic shower arrangement) for mixing hot cold water supply screwed down incl connecting legs & wall flanges for iron pipe 15mm dia bore fancy type, complete all as specified and directed.

S &F in repair CP brass mixture for kitchen sink, fancy type chromium plated for mixing hot and cold water screwed including connecting legs & wall flanges down high pressure crewed both ends for iron pipe 15mm bore, complete all as specified and directed.

S&F in repair MS chromium plated soap dish, chromium plated, any type, fixed to plugs with screws, complete all as specified and as directed.

S&F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with ABS chromium plated bracket guard and railing 60cm long with brackets, complete all as specified and directed.

S&F in repair toilet paper holder with flat recessed type MS chromium plated, complete all as specified and directed.

S&F for mild steel framed work as in doors or gates of angle or other section and as in frame work of cooler stand, ornamental work, rails fastening and heavy bracket etc, conforming to Fe-290, Gde-E-165, including cutting and welding, complete all as specified and as directed by Engineer-In-Charge.

M&L for providing precast cement concrete landing cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1 using 20mm grading stone aggregate and setting in cement morter 1:6 including necessary formwork and moulds, complete all as specified and directed

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) of 150/ 200mm bore, set in cement mortar, complete all as specified and as directed.

M&L for 150mm dia bore reinforced concrete pipes, class NP2, laid and jointed, complete with collars, complete all as specified and directed.

M&L for plain cement concrete 1:3:6, type C-2, using 40 mm graded crushed stone aggregate, as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm bore NP-2 pipe, complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate in) foundations, filling and mass concrete, complete all as specifed and as directed by Engineer-in-charge

Construction of soakage well of size 2.40 m dia and 4.5 m in depth, below inlet pipe level (Depth from Pipe to Ground Level 45 cm), excavation in any type of soil including plain cement concrete M-10,1:3:6, type C-2 (using 40mm graded crushed stone aggregates) in foundation and honeycombed brick masonry in cement mortar 1:4 and reinforced cement concrete cover slab, M-25, (using 20mm graded crushed stone aggregates), complete all as specified and as shown in drawing. Drawing No- CE/TD/1202/03 sheet 1/2 and 2/2 dated 09.10.03 revised 14.10.14 and 11.05.07.

Taking down carefully copper/aluminium point wiring ( light, fan, bell, socket or power, light fitting ) complete,including fixtures and fittings such as switches, ceiling roses, holders, regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement for smooth finishing of holes,small patches etc, complete all as specified and directed.

Material and labour for point wiring (IN NEW CONCEALED CONDUITS TO SURFACES) complete with 1.5 Sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade (MMS) and including cutting, chasing work at any height and all accessories are in concealed in walls /roofs/floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.20mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box,top cover, plate, blank plate, MS box,screws,washers and all modular electrical fixtures are to be used same make/brand only and modular box,top cover plate, deemed to the included rates in this item.

(a) One light/ ceiling fan/ exhaust fan / bell point controlled by one, one way switch 5 Amps and regulator.

(b) One light point controlled by one, two way switch 5 Amps.

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the independent board.

Description all as per item No.112 above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed but for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board, complete all as specified and directed.

Description all as per item No.112 above, but point wiring with 4.0 sqmm and earth conductor of size 4.0 sqmm complete all as specified and directed but for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board, complete all as specified and directed.

S&F modular switch piano, single pole, one way, 5/10 Amps, 1/2 module complete all as specified and as directed.

S&F modular switch piano, single pole, one way, 15/16 Amps, 1/2 module complete all as specified and as directed.

S&F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amps and 2 pin, 5/6 Amps, 2 module piano flush type, complete all as specified and as directed.

S&F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amps and 3 pin, 15/16 Amps, 2 module piano flush type, complete all as specified and as directed.

S&F for modular step type fan regulator 100/120 watt 2 module suitable for 230 volt 50 Hz AC supply, complete all as specified and as directed.

S&F ceiling rose, 3 terminal, PVC/polycarbonate body ISI marked, complete all as specified and directed.

S&F Modular Bell push 6 Amp 1 module, complete all as specified and directed

S&F Bell, Ding Dong AC 230 volts, single pole multi music type, complete all as specified and directed.

M & L for sub main wiring in repair complete with 2 run of 6.0Sqmm single core copper conductor (ISI marked) cable 1100 volts grade, FRLSH type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including cutting chases and making good the surface, one run of 6 Sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat and applying putty including cutting and chasing and including taking down existing wire, complete all as specified and directed. Note: - 2 run of 6.0 Sqmm single core copper conductor cable and one run of 6 Sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit only, complete all as specified and as directed.

S&F in repair sheet metal enclosure DB TPN 4 way double door made powder coated out of CRCA mild steel sheet 200 amps rated bus bar dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to disturbed surface complete existing DB, complete all as specified and directed.

S&F in repair sheet metal enclosure DB TPN 8 way double door made powder coated out of CRCA mild steel sheet 200 amps rated bus bar dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to disturbed surface complete existing DB, complete all as specified and directed.

S&F MCB TPN 63 Amps 10 KA,"C" series, AC, 415Volts, 50Hz, ISI marked, complete all as specified and directed.

S&F MCB SPN 32 Amps 10 KA,"C" series, AC, 240Volts, 50Hz, ISI marked, complete all as specified and directed.

S&F MCB SP 5 to 32 Amps 10 KA,"C" series, AC, 240Volts, 50Hz, ISI marked, complete all as specified and directed.

S&F in repair for metal clad box suitable for 230 volt 50 Hz AC supply 3 pin with MCB SP 20/32 Amps, including removal of old unserviceable one, complete all as specified and directed.

S&F for water heater storage type (Geyser) vertical/ Horizontal type as per site requirement with innder container of capacity 25 ltrs, electrically operated, AC 230 Volts, BEE 5 star rated, ISI marked including 04 Nos of old fashner nuts required suitable size fixed in brick wall all accessories such as safety valve, thermostate, NRV, connection pipe etc, including taking down existing geyser, complete all as specified and directed. NOTE :- The unserviceable Geyser shall be deposited with MES store yard for safe custody and shall be the property of the department.

Supply and fixing ceiling fan, metalic, sweep 1200mm, with BLDC Motor, high speed, includuing modular electronic Regulator and necessary fitting/fixtures such as Hook and clamps etc including connectig wire of suitable size and length from ceiling rose to fan connector, Rated Air Delivery in CuM/ Min- 210 Minimum, Service Value CMM/W 7.85 Minimum No of Speed 5, Insulation Class- E, Temperature Rise including taking down of existing fan, complete all as specified and directed. Note:- Old Ceiling fan taken out from the existing opening and shall be deposited at Store Yard of MES and shall be the property of Department.

S&F electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60 Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH including dismantling existing meter any type, complete all as specified and directed. Note: - Old electronic meter temper proof shall be deposited at store yard of MES and shall be property of department.

S&F modular LED Indicator Lamp fixing on modular switch board 240V, AC, 50Hz suitable for 1/2 module ISI marked, including connecting with suitable length of 1.5Sqmm PVC insulated copper conductor, complete all as specified and directed.

S&F decorative wall light fixture Globe type including 10 W LED Lamp made up of polycarbonate, complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed

S&F LED light fitting 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting, complete all as specified and directed.

S&F in repair for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminare with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting, complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, plain cement concrete earth pit chamber 1:3:6 type C1, of size 45X 45X 45 cement mortar, RCC cover 1:2:4 type B1 of size 45X45X6cement mortar, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value taking down and including removing old unserviceable earthing item, complete all as specified and directed.

S&L connecting and testing for XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area of 16 Sqmm 4 core size laid in trenches under floor/roads/hard standing along poles etc including taking down exixting cable any type and size all as specified and directed. NOTE: -Excavation and earth work, sand cushioning ,brick protection & GI pipe shall be measured and paid for separately), complete all as specified and as directed.

S&L connecting and testing for XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area of 16 Sqmm 2 core size laid in trenches under floor/roads/hard standing along poles etc including taking down exixting cable any type and size all as specified and directed. NOTE: -Excavation and earth work, sand cushioning, brick protection & GI pipe shall be measured and paid for separately), complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 m wide and not exc. 1.5 mtr deep and getting out any type of soil, complete all as specified and directed.

M&L clean dry river sand in trenches/ducts for cushioning to cable, 8cm in depth before laying the cable and 15cm in depth after laying the cable, complete all as specified and directed.

M&L for sub class 'B' brick of size 230 x 115 x 75mm laid flat work length equal to width of brick on sand for protection of under ground cable, complete all as specified and directed.

Returning filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in trenches, complete all as specified and directed.

Removal of surplus soil obtained from excavation to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed.

M&L in repair for GI pipe 40 mm dia light grade fixing to wall or laying in floors for protection of cable complete existing pipe, complete all as specified and directed.

Please Enable Macros to View BoQ information