Construction of TCP Office Building at Solan

Amount

Cutting in earth work through mechnical means in all heights/depths and in all kinds of soil such as kankar, moorum, shingle and decomposed of soft or hard rock i.e. their intermediate classification of soil & chiselling/wedging out rock where blasting is prohibited including saturated soil and filling in embankments etc. where necessary and disposal of all excavated unserviceable material in all leads & lifts through mechanical transporation. Any damage to the private / public property during execution will be restored by the contractor whatsoever the nature of the same may be.The serviceable materials will be stacked in specified dimensions in all leads and lifts as per the direction of the Engineer-in-charge.

Excavation in earth work in alll kind of soil such as Pick Work/ Jumper Work including Chiselling/Wedging out of hard or soft rock where blasting is prohibited and disposal of all excavated earth in all leads and lifts through mechanical trasportations, disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge.

Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work, blasting work and chiselling / wedging out of hard or soft rock where blasing is prohibited up to all depths stacking the excavated soil not more than 3 meteres clear from the edge of excavation and then returning the stacked soil in 15 cms layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer-in- charge.

Excavation in drains and channels etc. in earth work including dressing of side and bed and disposing of excavated earth upto a lead of 20 metres and lift upto 1.50 metres disposed earth to be levelled and neatly dressed in Pick & Jumper Work including curing and testng including carriage of material in all leads & lifts.

Filling in plinth with sand under floors including watering,ramming, consolidating and dressing complete with cost of sand including carriage of material in all leads and lifts

Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site including carriage of material in all leads and lifts

Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete. (Payment for Stone to be made separately) including carriage of material in all leads and lifts

Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads and lifts.

Foundation, footing bases of columns etc. and mass concrete.

Columns, pillars, posts and struts square, rectanagular or polygonal in plan.

Flat surfaces such as soffits of suspended floors, roofs including inclined surfaces up to any degree, landings and the like: (i) Floors, etc. upto any in thickness.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

Beams, cantilevers, girders and lintels sides and soffits of beams, small ends of beams,beam haunching, cantilivers, girders, bressumers and lintels of any depth.

Stair cases with sloping or stepped soffits excluding landing.

Edges of slabs and breaks in floors and walls under 20cm wide.

Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in including carriage of material in all leads & lifts. Foundation and plinth

Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 40mm nominal size) excluding cost of centring and shuttering in: including carriage of material in all leads & lifts. foundation and plinth

Providing and laying cement concrete 1 : 4 : 8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete (excluding cost of form work) in foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1:5:10 (1 cement : 5 Sand :10 graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1 : 6 : 12 (1 cement : 6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1 : 8 : 16 (1 cement:8 sand:16 graded stone aggregate 20 mm nominal size) and curing complete on slab & floor excluding cost of form work screed laid under floor including carriage of materialin all leads and lifts.

Providing and laying cement concrete 1 : 8 : 16 (1 cement:8 sand:16 graded stone aggregate 40 mm nominal size) and curing complete on slab & floor in depressd portion excluding cost of form screed laid under floor including carriage of materialin all leads and lifts.

Applying a coat of hot bitumen (mexphalt 80 / 100 or equivalent) using 1.70 kg per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil including carriage of material in all leads and lifts.

Providing and laying cement concrete having strength of M-20 mixed design aggregate mechanically mixed and vibrated and curring complete excluding cost of form work and reinforcement for reinforced concrete works including carriage of material in all leads & lifts.

Foundations, footings, bases of column and the like and mass concrete.

Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.

Column, pillars, posts and struts upto all heights

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto all heights.

Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters buttersses,plinth and string courses etc. from top of foundation upto floor two level.

Providing & laying cement concrete having strength of M-20 design mixed aggregate mechanically mixed and vibrated for reinforced concrete in chajjas upto any thickness upto all heights i/c finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 sand) to give a smooth and even surface, centering/form work and curing complete excluding cost of reinforcement including carriage of material in all leads and lifts.

Providing and laying upto first floor two level reinforced cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) to give a smooth and even surface including centring and shuttering etc. but excluding cost of reinforcement in String courses, copings, bed plates, anchor blocks, plain windows sills and the like including carriage of material in all leads and lifts.

Providing and laying Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.

Providing throating, or plaster drip and moulding to RCC chajjas etc. including carriage of material in all leads & lifts.

Brick work using 2nd class common burnt clay building bricks in foundation & plinth in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and lifts.

Brick work using 2nd class common burnt clay building bricks in superstructure above plinth level upto all height in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.

Half brick masonry using 2nd class common burnt clay building bricks in foundation & plinth level upto all heights in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts.

Half brick masonry using 2nd class common burnt clay building bricks in superstructure above plinth level upto all heights in cement mortar 1:4 (1 cement: 4 sand) including carriage of material in all leads and lifts.

Common burnt clay building bricks 7.62 cm. thick in including carriage of material in all leads and lifts. SECOND CLASS BRICKS

Providing and fixing 100mm dia PVC pipe for weep holes including carriage of materialin all leads & lifts.

Stone filling behind retaining wall including carriage of material in all leads & lifts.

Providing and Fixing factory made UPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge. including carriage of material in all leads and lifts.

Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 including carriage of material in all leads and lifts.

Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) including carriage of material in all leads and lifts.

Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.)

Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm).

Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).

Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) including carriage of material in all leads and lifts. 5.0 mm thick instead of 4 mm thick.

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for UPVC doors, windows and clerestory windows with necessary screws including carriage of material in all leads and lifts. 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-incharge complete including carriage of material in all leads and lifts. Upto 5mm depth and 5 mm width

Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary including carriage of material in all leads and lifts. Frosted Glass. 4mm thick.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete including carriage of material in all leads and lifts.

Providing and fixing bright finished brass 100mm. Mortice latch with one dead bolt and a pair of levers, handles with necessary screws etc. complete (indian make of approved quality) including carriage of material in all leads and lifts.

Providing and fixing 19mm thick Commercial Board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of material in all leads &lifts.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of material in all leads &lifts.

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of material in all leads &lifts.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc complete including carriage of material in all leads & lifts.

Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete including carriage of material in all leads & lifts.

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. including carriage of material in all leads & lifts.

Providing and fixing bright finished casement stays (straight peg type) with necessary screws etc. Complete including carriage of material in all leads & lifts. 250 mm weighing not less than 0.28 kg.

Providing & fixing anodized aluminium hook & eyes with necessary screws or welding to chowakat including carriage of material in all leads and lifts.150mm.

Providing and fixing anodized aluminium floor door stopper with necessary screws etc. complete including carriage of material in all leads and lifts.

Providing and fixing bright finished brass ball catcher 10 mm dia including carriage of material in all leads and lifts.150mm.

Providing & fixing hydraulic door closer as per sample approved by the Engineer-in-Charge with necessary screwes etc.complete including carriage of material in all leads &lifts.

Providing and fixing oxidized M.S. double acting spring hinges with necessary screws including carriage of material in all leads &lifts. 150mm

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete including carriage of material in all leads and lifts. 20 mm dia

Providing and fixing Cub board lock including fixing with screws complete in all respects including carriage of material in all leads and lifts

Providing and fixing Digital glazed tiles any size/thickness in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry including carriage of material in all leads & lifts.

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete 20mm thick including carriage of material in all leads & lifts.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles of any size and colour manufactured of approved shade and design of NITCO, NTC, GICO,Kajaria in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including cost of tiles where required to be cut i/c carriage of material in all leads & lifts.

Providing and laying (double charged) Duro stone of any size and colour, thickness not less than 10mm Vitrified tile in flooring treads of steps landing laid on a bed of 12mm thick cement mortar 1:3(1 cement:3sand) laid over and jointed with neat cement slurry mixed with pigment of required shade o match the shade of tile completefinished with flush pointing in white cement i/c cost of cutting the tiles whereever required, the shade & sample to be approved by the Engineer-in-Charge including carriage of material in all leads and lifts.

Providing and laying Duro stone vetrified tiles of any size and colour, thickness not less than 8mm in skiring, risers of steps and dados upto all heights on f 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete i/c cost of cutting tiles whereever required, the shape and sample to be approved by the Engineer-in-Charge i/c carriage of material in all leads and lifts.

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for i/c carriage of material in all leads & lifts. 60mm thick inter locking blocks

Cement concrete flooring 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of material in all leads and lifts. 50 mm thick.

Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP ) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over, 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia meter with prepainted limpet & rubber washers complete with all accessories as required as per the direction of Engineer - in - charge i/c carriage of material in all leads & lifts.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete Including carriage of material in all leads and lifts.100mm dia pipes

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete Including carriage of material in all leads and lifts. PVC Plain bend 100mm dia

PVC Plain bend 100mm dia

PVC Plain Shoe 100mm dia

Providing and fixing M.S.holder bat clamps of approved design to C.I. or S.C.I pipes embeded in and including cement concrete blocks 10 x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etc Including carriage of material in all leads and lifts. 100 mm dianetre for C.I.pipe

Steel work welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material in all leads and lifts.

In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.

In gratings framed guard bars, ladders, railling, brackets and similar works i/c making holes & filling the same with cement concrete 1:2:4 (1 cement:2 sand 4 graded stone aggregate 20mm nominal size)

Providing and fixing 1 mm thick M.S sheet sliding shutters with frame and diagonal braces or 40 mmx40mmx6 mm angle iron 3.15 mm M.S gusset plates at junctions and corners 25mm dia pulley, 40mm X40 mm X6mm angle and T.iron guide at the top and bottom respectively,including applying a priming coat of red lead paint including carriage of material in all leads and lifts.

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint i/c carriage of material in all leads and lifts.

Providing & fixing stainless steel railing in staicase incuding fixing in position complete as per approved design by ite Engineer-in-Charge i/c carriage of material in all leads and lifts.

Providing & fixing stainless steel 3" dia vertical post in staircase as per sample approved by the Engineer-in-Charge i/c carriage of material in all leads and lifts.

Painting two costs (excluding priming cost on new steel and other metal surfaces with enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters including carriage of material in all leads and lifts. Enamel white paint/ other than white

Polishing on wood work with ready mixed wax polish of approved brand and manufacture including carriage of material in all leads and lifts. New Work

Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads and lifts.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material in all leads and lifts.

6mm cement plaster to ceiling in cement mortar 1:3 (1cement :3sand) including carriage of material in all leads & lifts.

10mm cement plaster in single coat on fair side of brick/concrete walls for internal plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth In Cement mortar 1:4 (1 cement:4 sand) including carriage of material in all leads and lifts.

Extra over item of plastering for finishing with a floating coat of neat cement slurry including carriage of materials in all leads and lifts.

15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior/exterior plastering upto all heights including arises, Internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:3 ( 1 cement : 3 sand) including carriage of material in all leads and lifts.

15 mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior/exterior plastering upto all heights including arises, Internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 ( 1 cement : 6 sand) including carriage of material in all leads and lifts.

20 mm cement plaster in single coat on rough side of brick / stone masonry for interior plastering upto all heights including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads and lifts.

20 mm cement plaster in single coat on rough side of brick / stone masonry for interior/exterior plastering upto all heights including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads and lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces/ ceiling or sloping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including carriage of material in all leads & lifts. (a) Priming coat with distemper primer. (Asian paint (Tractor Acrylic) Nerolac/Shalimar).

On Wall.

On Ceiling.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size)including carriage of material in all leads and lifts

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material in all leads and lifts.

Providing and laying Manglore tiles over mumty roofs grouted with cement mortar 1:3 (1 cement :3 sand) over a 12 mm layer of cement mortar 1:3 (1 cement :3 sand ) and finished neat including carriage of material in all leads and lifts.

Providing chases 75mm wide 50mm deep (average size) in walls for conduit pipes and filling the same with cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregate 20 mm and down gauge) after the conduit pipe is laid (excluding the cost of conduit pipe) including carriage of materialin all leads and lifts.

Providing and fixing to wall ceiling and floor (ISI marked) galvanised mild steel tubes (medium grade)i/c tube fittings and clamps including making good the wall, ceiling and floor including carriage of material in all leads and lifts.

15 mm nominal bore

20mm nominal bore

Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube ittings (earth work in trenches to be measured and paid separately including carriage of material in all leads and lifts.

15 mm nominal bore

20mm nominal bore

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts.

Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of material in all leads and lifts. 1000 litres net capacity tank

Providing and fixing high pressure PVC spigot and socket soil, waste and ventilating pipe ISI marked i/c fixing with approved adhensive (i/c PVC clips where ever required) including carriage of material in leads and lifts.

90mm nominal size.

110mm nominal size.

Providing and fixing PVC clamp ISI marked of approved design with steel screws and rawal plugs etc.compoed including carriage of materialin all leads & lifts.

90 mm nominal size

110 mm nominal size

Providing and fixing PVC Plain bend ISI marked complete i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts

90mm nominal size.

110mm nominal size.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc.complete including carriage of material in all leads and lifts

90mm nominal size.

110mm nominal size.

P/F PVC Single equal branch ISI marked of required degree with oval access door insertion rubber washer 3mm thick bolts and nuts complete i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts

90mm nominal size.

110mm nominal size.

Providing and fixing PVC Collar i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts

90mm nominal size.

110mm nominal size.

Providing and fixing (ISI marked) PVC Cowl i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts.

90mm nominal size.

110mm nominal size.

Providing and fixing (ISI marked) PVC floor trap of self cleaning design i/c fixing with approved adhensive with C.P. screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors including carriage of material in all leads and lifts.110x90 mm

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material in all leads and lifts.

Circular 560mmx400mm (oval type under counter.

Flat back 550mmx400mm

Providing and fixing PVC connection pipe Including carriage of material in all leads and lifts. 15mm dia 45 cm. length.

Providing and fixing C.P. connection pipe with brass union Including carriage of material in all leads and lifts. 15mm dia 45 cm. length.

Providing & fixing C.P. brass waste for wash basin or sink including carriage of material in all leads & lifts. 32mm dia

Providing and fixing M.I Union for Wash basin & Sink Including carriage of material in all leads and lifts. 32mm nominal bore

Providing and fixing PVC waste pipe for Wash basin & Sink Including carriage of material in all leads and lifts. 32mm nominal bore

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting including carriage of material in all leads and lifts(i) 610mmx510mm with bowl depth 200 mm

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers including carriage of material in all leads & lifts.

Providing and fixing C.P. brass towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. brass screws. Including carriage of material in all leads and lifts.600mmx20 mm

Providing and fixing C.P. brass towel ring with Plastic Gitti, Drilling hole etc complete in all respects Including carriage of material in all leads and lifts.

Providing and fixing 600mmx120mm glass self with C.P. Brass brackets and guard rail complete, fixed to wooden plugs with C.P. Brass screws including carriage of material in all leads and lifts.

Providing and fixing vitreous china wash down water closet (European type W.C. pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(1cement: 1sand)plastic seat & cover to be measured & paid for separately confirming to BIS specification Including carriage of material in all leads & lifts

Ordinary closet (Universal Closet).

Angle Indian Universal closet

Providing and fixing PTMT Coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)including carriage of material in all leads and lifts.

Providing and fixing plastic seat (solid /Hollow type) and cover for wash down water closet with C.P. brass hinges and rubber buffers:- including carriage of material inall leads & lifts. (a) White/coloured plastic seat and cover

Providing and fixing vitreous China floor mounted urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately i/c carriage of material in all leads & lifts

Providing and fixing Division Plate for Urinals 600mm x 300. Vitreous China including carriage of material in all leads & lifts.

Providing and fixing Vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of material in all leads & lifts.

Providing and fixing C.P. Bottle Trap for wash basin and sink including carriage of material in all leads and lifts. 32mm nominal bore

Providing and fixing stoneware gully trap grade 'A' complete with C.I. grating, C.R. masonry in cement mortar 1:6 chamber and water tight C .I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.78kg including carriage of material in all leads and lifts(i) Square mouth trap 100mmx100mm size p type

Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap i/c carriage of material in all leads & lifts.

Cutting holes through existing brick work including making good the same in cement mortar 1:6 (1 cement: 6 sand) per CMs depth of cutting (i) Holes upto and including 400 sqcm in area including carriage of material in all leads and lifts

Providing anfd fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats/PVC plug with C.P. brass screws Including carriage of materia in all leads and lifts.

Providing and fixing PTMT Jet spray of approved quality & colour with 1.50 metre tube including screws etc. complete in all respect 15mm dia incliding carriage of material in all leads & lifts.

Providing and fixing toilet paper holder including carriage of material in all leads and lifts. C.P. Brass

Providing and fixing C.P. Brass bib tap with capstan head short/ long body including carriage of material in all leads and lifts.15mm dia

Long Body

Short Body

Providing and fixing 15 mm C.P. mixer for kitchan sink with top/ bottom swinging spout Including carriage of material in all leads and lifts.

Providing and fixing C.P. Brass angle valve 15 mm without/with nuts Including carriage of material in all leads and lifts.15 mm dia

Constructing chamber 600mm X 450mmX600mm inside sizes for water meter complete with C.I. double Flap Surface box 400mmX 200mm X200mm (inside) with locking arrangments and RCC top slab 1:2:4 mix (1 cement:2 sand:4 graded stone aggregate 20mm nominal size )100mm thick foundation concrete 1:5:10(1cement:5 sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3(1cement:3 sand) finished with floating coat of neat cement including curing complete including carriage of material in all leads and lifts.(a) With 115 mm thick walls brick masonry in cement mortar 1:5(1cement:5 sand)

Providing and fixing two hole basin mixing Faucet Including carriage of material in all leads and lifts.

Providing and fixing C.P. Brass pillar tap with capstan head including carriage of material in all leads and lifts.15mm dia

Supplying and fixing S.F.R.C. cover with frame for manholes/RWHT of 560mm internal diameter (Medium duty) the total weight of cover and frmae to be not less than 173 Kg(weight of cover 70 Kg and weight of frame 103 Kg) including carriage of materials in all leads and lifts.

Construction chamber for sluice valve with C.I. Surface box 100mm x160mmx180mm inside with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 75mm thick foundation concrete 1:5:10 (1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete including carriage of material in all leads and lifts. with 230 mm thick walls of brick masonry in cement mortar 1:5(1 cement: 5 sand)

Providing and fixing C.I. Sluice valve(With hand wheel) as per IS-780 class upto 300mm dia (including brass spindle and as per IS:2906 Class-II for diametres more than 300mm complete with bolts , nuts, rubber insertion etc. (the tail pieces if required shall be measured and paid for seperetaly)including carriage of material in all leads and lifts. (a) 150mm nominal size.

Supplying and fixing 2.00 H.P. motor for lifting the water from RWHT to PVC tank including carriage of material in all leads and lifts.

Providing and fixing sand cast (spun) cast iron spun spigot and socket waste soil waste and ventilating pipes (lead caulked joints to be measured and paid forseparately) i/c making good the wall ceiling and floor including carriage of materialin all leads & lifts.(a) 100 mm nominal size.

Providinand fixing sand cast iron cowl confirming to BIS Specification including carriage of material in all leads & liftsi.(i) 100 mmnominal size

Providing and fixing 200mm wide cast iron rungs with chequered or ribbed non slip surface including fixing in manholes/ septic tank with 200 mmx200x100mm cement concrete 1:3:6 ( 1cement: 3 sand: 6 graded stone aggregate 20 mm nominal size)including carriage of materialin all leads & lifts.

Providing and fixing M.S. stay and clamp for sand cast iron/ cast (spun) iron pipes including carriage of materialin all leads & lifts. 100 mm nominal size

Construction of soak pit as per standred design 2.50 mtr. Dia and 3.00 mtrs. Deep made with brick bats and dry brick honey comb shaft as per design/ specifications including carriage of materialin all leads & lifts.

Constructing man hole with RCC top slab in 1:2:4 mix (1cement:2sand: 4graded stone aggregate 20mm nominal size ) Foundation concrete 1:4:8 (1cement : 4sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortor 1:3(1 cement:3 sand) finished with a floating coat of neat cement and including making channels in cement concrete 1:2:4 mix (1cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testng including carriage of material in all leads & lifts.

Inside size 800x800x 500mm including S.F.R.C. manhole frame and cover medium duty 560mm internal diametre . The total weight of cover and frmae to be not less than 173Kg(weight of cover 70 Kg and weight of frame 103 Kg)ISI marked (a)With 230mm thick walls of brick masnoey using common burnt clay building bricks in cement mortor 1:3(1 cement :3sand).

Inside size 1200mmx900mm x &1.00 mtr deep including S.F.R.C. frame and cover medium duty 560mm internal diametre the total weight of cover & frame to be not less than 173kg(weight of cover 70kg & weight of frame 103kg (a)With 230mm thick walls of brick masnoey using common burnt clay building bricks in cment mortor 1:3(1 cement :3sand)

Inside size 1200mmx900mm x 1.50 mtr deep including S.F.R.C. frame and cover medium duty 560mminternal diametre the total weight of cover & frame to be not less than 183kg(weight of cover 70kg & weight of frame 103kg (a)With 230mm thick walls of brick masnoey using common burnt clay building bricks in cment mortor 1:3(1 cement :3sand)

Extra over item No. 135.00 for every additional depth of 0.10 metre or part thereof of manhole including carriage of material in all leads & lifts.

From 0.5 metre upto 1.00 metre depth

From 1.5 metre upto 2.00 metre depth

Providing, laying (to level or slopes) and jointing reinforced concrete light duty nonpressure pipes I.S. Class N.P.2 or P of the following internal diameters with collars and butt ends prepared for collar joint including testing of joints complete including carriage of material in all leads & lifts. 150mm

Des Raj Thakur

VISHWA BHUMI ENGINEERS P LTD