Development of road, footpa...

Amount

Providing, laying, spreading and compacting graded stone aggregate to 250mm Wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in subbase / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per technical clause 406 of MORTandH specifications.

Granular Sub-Base with Coarse graded material – Grading-III (Table: 400-2). Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with Rotator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.of MORTandH specifications

Primer Coat as per Cl. 503 of MORTandH specs. Providing and applying primer coat with VG-10 on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per technical clause 503 of MORTandH specifications

Tack Coat as per Cl. 503 of MORTandH specs. Providing and applying tack coat with penetration grade bitumen VG - 10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause503of MORTandH specifications

Bituminous concrete as per Cl. 507 of MORTandH specs Providing and laying 30mm - 45 mm bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG - 40 @ 5.4% per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of per MORTH specifications

Providing and laying 50mm - 75 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 40 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORTandH specifications

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately

Providing and fixing Precast RCC Drain Cover (1.3m x 0.5m x 0.15m) of M-30 grade cement concrete complete in all respect as per direction of Engineer-in-charge.

Design, Supply, Installation, Commissioning and 4 years Warranty with Comprehensive Maintenance of Complete Standalone Single arm off-grid AIO Solar Streetlight without Sensor made of Extruded Aluminium. The luminaire shall be able to deliver minimum 8100 Lumens on 100% output with minimum system efficacy of 170lm/w. The luminaire shall have In-built Lithium Ferro Phosphate (LiFePO4) battery having rating as 12.8V 42AH. The luminaire shall have in-built Mono crystalline solar panel of 120WP on the back of Luminaire. The luminaire shall have in-built MPPT charge controller. The luminaire shall be dimmable. The luminaire shall have autonomy of 2 Night (12Hrs Each) with dimming profile. The Dimming profile shall be: First 1 hrs from dusk 100% output and Next 11 hours 30% output. The luminaire shall also have Bluetooth connectivity to program/configure the dimming profile at site. The luminaire shall be so designed that it should be able to charge the battery to 100% in 1.1 Days (~27 Hrs). The luminaire shall be IP65 and IK08 rated. The dimensions of the luminaire shall be 1160MM (±10%) X 685MM (±10%) X 95MM (±10%). Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322, `FAT` before dispatch as per IS 10322 and IK Test. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before the supply of item. The LED Luminaire should use BIS registered battery. Successful bidder shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIS certificate for battery being used in luminaire. The item is inclusive of providing and fixing 7 Metre Long decorative PU painted pole with top dia 75 mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mm complete in all respects and as per directions of Engineer-in-charge

Design, Supply, Installation, Commissioning and 4 years Warranty with Comprehensive Maintenance of Complete Standalone Double arm off-grid AIO Solar Streetlight without Sensor made of Extruded Aluminium. The luminaire shall be able to deliver minimum 8100 Lumens on 100% output with minimum system efficacy of 170lm/w. The luminaire shall have In-built Lithium Ferro Phosphate (LiFePO4) battery having rating as 12.8V 42AH. The luminaire shall have in-built Mono crystalline solar panel of 120WP on the back of Luminaire. The luminaire shall have in-built MPPT charge controller. The luminaire shall be dimmable. The luminaire shall have autonomy of 2 Night (12Hrs Each) with dimming profile. The Dimming profile shall be: First 1 hrs from dusk 100% output and Next 11 hours 30% output. The luminaire shall also have Bluetooth connectivity to program/configure the dimming profile at site. The luminaire shall be so designed that it should be able to charge the battery to 100% in 1.1 Days (~27 Hrs). The luminaire shall be IP65 and IK08 rated. The dimensions of the luminaire shall be 1160MM (±10%) X 685MM (±10%) X 95MM (±10%). Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322, `FAT` before dispatch as per IS 10322 and IK Test. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before the supply of item. The LED Luminaire should use BIS registered battery. Successful bidder shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIS certificate for battery being used in luminaire.The item is inclusive of providing and fixing 9 Metre Long pole with top dia 100 mm and bottom 200 mm with base plate of size 350 x 350 x 20 mm complete in all respects and as per directions of Engineer-in-charge

Recovery- Credit of Kerb Stone (The amount computed by rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. kerb stones obtained from dismantling of existing median, islands has been calculated taking assumption that 70% of existing kerb stones will be retrieved and can be reused by the contractor at any other site. The reverse rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below reserve price will be considered for all purpose in case the agency quotes lesser than reserve price. The price quoted against the recovery of existing kerb stones shall have minimum reserve price of Rs. 2226/- per cum.)

Recovery- Credit of Precast Interlocking Paver block (the amount computed by rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. Precast Paver block obtained from dismantling of existing footpath has been calculated taking assumption that 70% of existing Paver block will be retrieved and can be reused by the contractor at any other site. The reverse rates are minimum rates to be used as base for the quoting purchase rate by the agency. No rates below reserve price will be considered for all purpose in case the agency quotes lesser than reserve price. the price quoted against the recovery of existing Paver block shall have minimum reserve price of Rs. 357/- per sqm

Recovery- Credit of M.S. Grill (the amount computed by rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. M.S. Grill obtained from dismantling of existing boundary Wall has been calculated taking assumption that 70% of existing M.S. Grill will be retrieved and can be reused by the contractor at any other site. The reverse rates are minimum rates to be used as base for the quoting purchase rate by the agency. No rates below reserve price will be considered for all purpose in case the agency quotes lesser than reserve price. the price quoted against the recovery of existing M.S. Grill shall have minimum reserve price of Rs. 51/- per Kg

Recovery- Credit of Steel reinforcement of 80% length for R.C.C. work recovered from exsiting drain available at site, where not included in the complete rate of RCC dismantle, Complete as per Engineer in charge. The Quantites of the above material have been worked out on the basis of theoretical quantities laid on this road. However agency may visit before quoting rates and asses the extent of retrieved material. There shall be no measurement after actual scarifying / dismantling and if material after dismantling is found on lesser side, no claim of agency on this score will be entertained and full recovery on the basis of qouted rate and quantity exhibited in the BOQ shall be made. The reverse rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below reserve price will be considered for all purpose in case the agency qoutes lesser than reserve price. The price qouted against the recovery material shall have minimum reserve price of 34.00/- per kg).

Bidder Name

Amount

SHIVA BUILD TECH PRIVATE LIMITED(GSTN-06AAFCS2631B1ZW)

P C Gupta and Co(GSTN-06AAEPG5955G1ZR)

Y D Builders and Hotels Pvt Ltd(GSTN-07AAACY0026D1ZW)

Y D Builders and Hotels Pvt Ltd

P C Gupta and Co

SHIVA BUILD TECH PRIVATE LIMITED

Y D Builders and Hotels Pvt Ltd