2-Naya Moradabad Yojana ke Sector-13 me pani ki line dalne ka karya.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavatedearth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil DSR 2.6.1 /2023(RATE-177.50)

Supply and laying 110mm internal dia P.V.C. I.S.I. Mark Finolex, Astral or Jindal make pipe of 6kg/sqm pressure with all fitting as socket, bend, Tee, Cross etc. complete and including supply of all fitting materials, labour and T&P etc. required for proper completion of the work. (psr) Pipe thickness 5mm to 6mm Analysed rate

Supply and laying 160mm internal dia P.V.C. I.S.I. Mark Finolex, Astral or Jindal make pipe of 6kg/sqm pressure with all fitting as socket, bend, Tee, Cross etc. complete and including supply of all materials, labour and T&P etc. required for proper completion of the work. (psr) Pipe thickness 5mm to 6mm Analysed rate

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately)100 mm dia : DSR 2023/18.59.3(RATE-8893.00)

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter DSR-18.31.3.1/2023(RATE-6966.55)

Construction of brick masonary house connection chamber of size 900x900x1000 mm.(Internal). with M150 brick work in 1: 4 (1 cement and 4 coarse sand) for sluice valve, with C.I. surface box 100mm top dia, 160mm bottom dia & a180mm deep (inside) with chainded lid and RCC top slab 1:2:4 mix i/e necessary excavation, foundation concrete 1:5:10 (1cement 5 fine sand 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1cement 3 coarse sand) 12 mm thick, finished with a foating coat of neat cement complete as per standard design. (DSR 18.34.1/2023)(RATE-18896.70)

Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS: 1538-Up 2.00 to 300 mm dia DSR No. 18.66.1/2021(RATE-8628.60)

Please Enable Macros to View BoQ information