Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.4 LAccepted-Finance | ₹12.4 L | L1 | Accepted-Finance L1 |
| 2 | Not Admitted-Finance AT POST LOKHANDI SAWARGAON TQ AMBAJOGAI DIST BEED | BEED | MAHARASHTRA | 413207 | - | - | Not Admitted-Finance Not qualified for AOC |
| 3 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| 5 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹12.5 L
EMD Value
₹12,473
Closing Date
22 Dec 2025, 5:00 pmClosed
Executive Engineer WD.02 Z P Beed
Executive Engineer WD.02 Z P Beed
ZPBEED/WD2/DPDC/124/2025-26
2025_BEED_1260029_1
ZPBEED/WD2/DPDC/124/2025-26
Open Tender
Civil Works
180 days
Beed
Registration Cert., ITR, GST, PAN Card etc As per Tender Conditions
2 documents required · 2 mandatory
₹1,000
₹12,473
25 Apr 2026
15 Dec 2025
23 Dec 2025
15 Dec 2025
22 Dec 2025
15 Dec 2025
Item no 1: Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and 1 strutting etc. complete. (Lift upto 1.5 m.) Bd.A.1 Page No.259 SSR.Item No.21.01 Page No.153
Item no 2: Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 Bd.A.2 Page No.259 S.S.R.Item No.21.05 Page No.153
item no 3:- Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. As directed by Engineer in charge. S.S.R.Item No.21.40 Page No.157
Item no 4: Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, comparting roughening them if special finish is to beprovided, finishing if required and curing complete, with fully automatic micro 4 processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finelywashed etc) AS directed by engineer in chang SSRI NO 24.01 page no 226
Item no 5: Providing and laying in situ /Ready Mix cement concrete M-20 of trap/granit/quartzite/gneiss metal for RC.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc SSR1 No 35.11 P.No.330
Item no 6-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of tra granite/quartzite/gneus metal for R.C.C. columns as per etailed designs and drawing or as directed including steel centering, formwork.cover blow laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thicictness to give a smooth and even surface or roughening if special finish is to be provided and curing ete complete (Encluding 6reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc., complete. With fine aggregate (Natural Sand/Crewshind sand VSI Grade finely washed etc) SSR I NO 25.31 P.NO 230
Item no 7: Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gheiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steelcentering formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and 7 curingete. complete. (Excluding reinforcement and structural steel) with fully autematic micro processor hased PLC intering with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 55 RINO 25.50 p no 135
Item no 8: Providing second class Burnt Brick masonry with conventional/ 15. type beicks in cement mortar 1:6 in 8 foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete SSR item no 27.01 page no254
Item no 9:- Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete (SSR Item no 21.37 page no 117)
Item no 10: Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. 10 complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc) SSR item no 25.70 page no 135
11 Item no 12- Providing and fixing in position TMT FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding withwires or tack welding and supporting as required complete. S S R item no 26.33 page no 139
item no 13 Providing second class Burnt Brick masonry with conventional/ 1.5. type bricks in cement mortar 1:6 in 12 superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (SSR item no 27.05 page no 144)
Item no 15: Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks. 13 laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc) (SSR item no 26.05 page no 135.
Providing and fixing frame with/without ventilator of size as specified with Country non teak wood for doors and 14 windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting. complete. As directed by Engineer in charge. SSR Item No.39.02 Page No.245
Removing mud plaster including disposing of the spoils as directed with all leads, lifts etc, completeSSR. Item No. 15 46.23 Page No.297
Providing and fixing fiber glass reinforced polyster door shutter 30 min thick as per 15 14856 (2000) (Reaffirmed 16 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete spec. no. As directed by engineer in charge SSR Item No. 39.58 Page No.257
Item no 22- Providing and fixing mild steel grill work for windows, ventilators, etc. 20 kg/sqm as per drawing including 17 fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. SSR item no 40.01 page no 12
Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete 18 surface in all positions including scaffolding and curing etc. complete. S.S.R.Item No.32.01 Page No.209 Spec. No. Bd.L. 1. P.No.367
Item no 24 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR item no 32.03 page no 153
Item no 25: Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to 20 concrete, brick surface, in all positions including scaffolding and curing etc.complete. SSR Item no 32.07 page no 153
Item no 28:- Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to 1.5.15622/2006 (group D 21 Il-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. ssr 32.24 page no 155
Providing and laying ceramic tiles of having size 30 cm. x 30 cm, and confirming to corresponding 15. for dado and skirting. in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar Including joint 22 filling with white/ colour cement slurry cleaning curing etc. complete. Bd. M.13 Page No. 386. Square 5.5.R.Item No. 33.25
Item no 30:- Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for floaring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. C
Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange. M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap 24 headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handies, locking arrangement and one coat of red lead primer and oil painting etc. complete. (1.S. 105211983), BD-T-57 Page No. 511 S.S.R.Item No.39.26 Page No.249
Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding 1.5. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, 25 applying primer coat scaffolding if necessary, and watering the surface for two days etc complete. As directed by Engineer in charge. SSR.Item No.35.25 Page No. 225
Providing and applying plastic emulsion paint of approved quality, colour and shade to new surfaces in three coats 26 including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. Bd.P.6 Page No. 414 item No.36.14 Page No. 228
Item no 37:- Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including Por S 27 trap cast iron soil and vent pipe upto the outside face of the wall (1:5:10) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete SSR item no 42.33 page no 202
Item no 38: Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low 28 density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres SSR item no 42.54 page no 204
Item no 40:- Providing and fixing 100 mm dia stabiliser pipe/P.V.C. soil vent/waste pipe and with necessary fixtures 29 and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete SSR item no 42.52 page no 204
Providing and fixing on walls/ ceiling/floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the 30 same in PWD chowky or as directed etc. complete. BD.V Spage 551 and as directed by Engineer in charge S.S.R.item No. 42.55 Page No.280
Providing and fixing walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the 31 same in PWD chowky or as directed etc. complete. HD.V5 page 551 and as directed by Engineer in charge 55.item No.42.56 Page No.200
Providing and fixing on walls/ceiling/floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the 32 same in PWD chowky or as directed etc. complete. BD.V 5 page 551 and as directed by Engineer in charge SS.Ritem No. 42.57 Page No.200
Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. cumplete. Including removing existing pipe line if necessary and conveying and stacking the 33 same in PWD chowky or directed etc. complete. BD.V 5 p
age 551 and as directed by Engineer in charge SS.R.item No.42.58 Page No. 280
Item no 45:- Providing and fixing 15 mm dia. screw down hib/stop tap of brass including necessary socket union nut 34 complete. SSR item no 41.40 page no 196
Providing and fixing screw down 15 mm dia, wheeled stop tap of brass including necessary sockets/union nut 35 complete Bd.V.9 Page No. 555 SS.R.ltem No.41.43 Page No.270
Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar 36 tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. Spec. No. Bd.V.30 P.No.565 SSR Item No. 41.66 Page No.272
Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from 37 inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. SSR item no 42.12 page no 200.
Providing and fixing 8 cm Rigid PVC Nahani Trap including PVC grating bend and piece of UPVC pipe upto the 38 outside face of the wall, Making the good damaged surfae and testing etc. complste SSR Item No.43.17 Page No.288
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.90 MB
BOQ_2171523.xls
BOQ • 0.36 MB
SBD124.pdf
Tender Documents • 3.46 MB
Download all tender documents and submit your bid