Shifting for a safer installation of existing 2.2KV overhead HT line from Beniadih Hospital to Jakotiyabad pumping house of Giridh Project, Giridih Area.

Amount

Shifting for a safer installation of existing 2.2KV overhead HT line from Beniadih Hospital to Jakotiyabad pumping house of Giridh Project, Giridih Area.

Supply of Cement Pole

Erection of RCC/PCC Pole of following length in brick ballast and ramming the foundation, finishing with 15 mm thick cement concrete (1:3:6) layer on top with including excavation land refilling etc as required.

Erection of steel tubular or rail pole strut in cement concrete 1:3:6(1cement : 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavationand refilling etc. as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc as required.

Dismantling of over head lines comprising of copper/ aluminium over headconductor, G.I. wire, cross arms, insulators etc. as required.(0.145kg/m * (60*3)m/span*11 span)+10%)440.22

Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc. as required

Supply and erection of pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

Erection of pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

Supply and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required

Erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required

Supply of angle iron bracket (50mm x 50mm x 6mm)65 cm long as required(1.5ft bracket-27nos) for fourth/earth wire

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required.( 2 angle in 10 poles and 18 angle in 18 poles)

Nut Bolt

Cradling (As required across the roads)

Total impact of GST for the purpose of CTC

M/S SAHU ELECTRICAL WORKS

M/S ZEE ENTERPRISES