GE/C-36/2023-24 INTERNAL PERIODICALS SERVICES INCLUDING REPAIR TO EXTERNAL DRAIN, FENCING, BOUNDARY WALL, HARD STANDING, PARKING SHED AND MISC E/M WORKS INCLUDING DAILY MAINTS COMPLAINTS AT ZONE A, JCOs/ ORs ACCN IN KANDHAR, RR COLONY (250 DUs), URI

Amount

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc up to 10m height complete all as specified and directed.

M&L for 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by engineer-in-charge complete all as specified and directed complete.

M&L for 10mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by engineer-in-charge complete all as specified and directed.

M&L for 5mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by engineer-in-charge complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of putty complete all as specifed as direted by Engr-in-charge.

M & L for applying two coats of oil bond destember over one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed.

M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for old decorated surfaces plastered or unplastered surface of wall and complete removal of existing treatment by rubbing , brooming down,washing with water etc applying two coat of oil bond distemper over one coat of putty on wall complete all a spcefied.

M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing treatment by rubbing , brooming down,washing with water etc and applying two coat of cement based paint up to 10 m height complete all as specified and directed.

M & L for preparation of Old surface (Plastered or un plastered) on ceiling by completely scraping/ removing the existing treatment and applying two coats of white wash over a coat of primer complete.

M&L preparation of Old or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M & L for preparation of Old or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

S&F in repair figured glass pin head type 4mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary, complete all as specified.

S & F in repair for 15 mm dia 600mm long PVC connections with brass check nut complete.

S & F in repair for bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repair 15mm dia Pillar taps, brass CP, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed .

S&F in repair for angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and as directed.

S&F Non - skid Ceramic colour tiles 600 x600 x 7 to 8 mm thick in floors etc and 15mm thick screed bed 1:6 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

S&F Non - skid Ceramic colour tiles 600 x100 x 7 to 8 mm thick in vertical surfaces etc and 10mm thick screed bed 1:4 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

M&L for glazed ceremic colour tiles (600x300x7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame).

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame).

S&F in repair Steel window (Factory made) double rebate, with side hung, shutter incl hinges, tower bolt, steel handle and peg stay complete with glaze and gauge shutters (both are complete) devotailed or welded including making good to cutting holes with PCC 1:2:4 and complete finishing to cill and jamb corners with plaster and match all as specified.

S&F in repair mild steel framed work such as grills gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders freamed balusters, walk ways, railings, framework of watertanks and similar work including aldrop and hinges holdfast etc conforming to Fe 290. Gde-E-165.

S&F in repair Pressed steel frames box type made of 1.25 mm thick MS Sheet double rebates of size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc, incl PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

S&F in repair Pressed steel frames box type made of 1.25 mm thick MS Sheet single rebates of size 105x60mm for doors, ventilator including necessary fixing lugs, hinges, lock strike plate etc, incl PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

S&F in repair 35 mm thick 2nd class hard wood glazed and skelton shutter devided into square with plain, chamferred or rounded sash bar and fitted with cut and mitred beads for securing glass, size of members as per SSS Part - I section 8 clause 8.24 (b).

M & L for 30 mm thick 2nd class hardwood plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated.

S&F in repair for fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame and fixing with ancher bolts all as specified and as directed.

S&F in repair Floor door stopper of aluminium alloy body and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring, fixed to shutters, complete all as specified and as directed.

S & F in repair 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

S&F in repair MS butt hinges medium weight 100 mm size fixed with MS screws.

S&F in repair aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws.

S&F in repair 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws.

S&F in repair 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut.

S&F in repair for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar all as directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S & F in repair for Aluminium drapery curtain Rod 25mm dia Powder Coated including wooden side caps, brackets, and rings @ 120mm c/c/ complete all as approved by Engineer-in-charge.

Demolition of brick work or stone masonry built in cement mortar in any position including segregating serviceable/unserviceable bricks/stones Complete all as specified and directed by Engineer-in-Charge.

M&L for Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as specified and directed by Engineer-in-Charge.

All as per S.No. 44 here in before but except bricks.

Demolition of concrete and pavings n.exc 15 cm thickness (below or above ground level)

M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm stone graded agg) as in louversand jallies 40mm thick designed as fort pattern (measured solid) including all moulding but exceeding frame and set in CM1:4 all as per sample shown and directed by engineer-in -charge.

M&L providing CM 1:3:6 Type C-1 20 mm graded agg. In precast coppings incl slightly rounded chemered angles and throating including necessary form work complete.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors or fixed on walls 110mm dia fixed in repairs Complete all as specified and directed by Engineer-in-Charge.

M&L for providing 40 mm thick cement concrete 1:2:4 type B1 (20 mm graded aggregate) as in hard standing laid in alternate bays Complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast concrete interlocking paver block 60mm thick M-35 grade any shape and size with grey cement and pigment Complete all as specified and directed by Engineer-in-Charge.

M&L for sand filling under floor or in foundations including watering and consolidation Complete all as specified and directed by Engineer-in-Charge.

M&L 15 mm thick screed bed or bedding layer for laying floor finishes of tiles CM 1:6 Complete all as specified and directed by Engineer-in-Charge.

S&F Chequered cement concrete PU coated colourtiles 300cm X 300cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments Complete all as specified and directed by Engineer-in-Charge.

Dismantling/ demolition posts or struts embedded in soil or concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground Complete all as specified and directed by Engineer-in-Charge.

Dismantling fencing wiremesh, any type Complete all as specified and directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) n exc 0.5 cum getting out in any type of soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm and covering and removal of surplus soil n exc 50m and making good surface Complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete and sub base etc Complete all as specified and directed by Engineer-in-Charge.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting, etc including embeding in concrete and similar work conforming to Fe-290 Gde-E-165 Complete all as specified and directed by Engineer-in-Charge.

S&F high quality zinc coated GI Chain link fencing of required width in mesh size 50x50 mm made of GI wire dia not less than 3mm and fix with column with nut or bolts and flat iron 40x5mm including strengtheing with 10mm TMT bars, conforing to standard grade steel complete all as specified and directed. NOTE:- (i) Payment of TMT bar shall be made in seperate items in this Schedule. (ii) The Engr-in-Charge along with rep of contractor shall verify the weight mesh and submit the copy along with photographic eveidence along with RAR and Purchase Voucher. (iii) The quoted rate shall be inclusive of Nut bolt required.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Complete all as specified and directed by Engineer-in-Charge.

S&F 12mm mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n exc 5cm long Complete all as specified and directed by Engineer-in-Charge.

S&F in repair galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straning and fixing to fencing post with staple or steel pins etc Complete all as specified and directed by Engineer-in-Charge.

Dismantling of wrought iron or mild steel work of any description Complete all as specified and directed by Engineer-in-Charge.

S & F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and framework for tank stagging and simillar items also fastening and fixing complete all as specified and directed by enginer-in -charge.

S & F in replacemen precast fibre reinforced cement concrete Manhole/ perforated drain cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mm x70 mm omplete all as specified and as directed.

Dismentling plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering Complete all as specified and directed by Engineer-in-Charge.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Complete all as specified and directed by Engineer-in-Charge.

Checking electrical points for continuous electric supply system and replacement of unserviceable spares for all electrical fixtures, ceiling/exhaust fans of any size and capacity and carrying out minor repairs, fixing screws, tightening of loose wires, any type renewal of small pieces of electric wire upto 1.00 mtr length and maintenance work complete on all working days including holidays all as directed by Engr-in-charge.

Attending to Geyser complaints at site including checking and rectification of any electric fault/ water leakage and making good in all respects including minor repairs, replacement of unserviceable spares, burnt copper wire connections wherever required and repairing any type of switch, socket, plug top etc complete all as specified and directed. Notes for Item No. 69 & 70 (a) Supply only spares shall be measured and paid under relevant item of Sch 'A'/ BOQ (b) Contractors are advised to visit the sites before quoting their rates. (c) Materials for minor and maintenance repair works as directed by Engineer-in-Charge shall be supplied by the contractor within one week from the date of issue of work order. (d) Contractor shall provide and deploy adequate experienced Exp. professional to carry out day to day complaints and tradesman will remain present in mention area Complainet Cell from 0830Hrs to 1800 Hrs from Monday to Sunday (01 Electrcian & 01 Helper) . In case of any breakdown/ emergency, contractor shall make arrangement to attend and rectify the complaints in odd hours on sunday/ holiday also. The rates quoted in sch 'A' respective items shall be deemed to be included and nothing extra shall be admissible on this account.Note:whatever be the nature of electrcal complaint the wholesole rectification responsibilty lies with the contractor. (e) Contractor shall be penalised @ Rs. 100/- per complaint per day, if he fails to attend the complaint within 8 hours.

Taking down sub main wiring off sizes etc complete all as specified and directed.

Supply, laying and drawing in existing concealed PVC rigid surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforming to IS : 694 of 1990 complete including connection all as specified and directed.

Supply only modular box type single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply only single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 10 Amp complete all as specified and directed.

Supply only LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply only LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. (Mirror light)

Supply LED 9/10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply only surface ceiling mounted, round LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 80 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply only 14W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz

Supply only 9 W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz, .

Supply only replacement of capacitor 3.15 Mfd, 240 V complete all as specified and directed.

Supply only replacement of capacitor 2.5 Mfd, 240 V complete all as specified and directed.

Supply only batten holder including with connections complete all as specified and directed.

Supply only switch piano flush button type single pole one way 6 Amps all as specified.

Supply only switch piano 6 amp SP two way, ISI marked.

Supply only socket piano outlet 6 Amp flush button type all as specified.

Supply only bell push single pole 6 Amps all as specified.

Supply only switch piano flush button type single pole 16 Amps.

Supply only socket piano outlet, 2 in 1, 3 pin 6 and 16 Amp single pole .

Supply only Ceiling fan regulator electronic step switch type 120 Watt 230/250 Volts single phase complete.

Supply only switch Modular type 6 Amps one way 230V AC complete all as specified and directed by Engineer in charge.

Supply only Modular socket outlet 5 pin 6 Amp socket 2 moduler complete all as specified and directed by Engineer in charge.

Supply only switch Modular type 16 Amps one way 230V AC complete all as specified and directed by Engineer in charge.

Supply only Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.

Supply only Modular five stepped type electronic fan regulator 2 module 230V AC complete all as specified and directed by Engineer in charge.

Supply only swich & socket combined 5 pin 6 Amp sp .

Supply only swich & socket combined 5 pin 16 Amp sp.

Supply only ceiling rose surface PVC 65x50 mm type with three terminals.

Supply only relacement plug top 16 Amps 3 pin 230- volts.

Supply only Electric bell Ding-Dong AC 230 Volt etc complete all as specified and directed.

Supply only MCCB 160 Amp 4 pole 16 KA at 415 V with fixed thermal magnetic release complete all as specified directed.

Supply only MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal magnetic release complete all as specified directed.

Supply only double pole MCB 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for 10 KA breaking capacity, complete all as specified and directed.

Supply only Single pole MCB 6 to 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for 10 KA breaking capacity, complete all as specified and directed.

Supply only in repair MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply only in repair MCB DP 20 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply only in repair MCB DP 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply only in repair MCB DP 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 1.5 sqmm with approved colour code completed all as specified.

Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 2.5 sqmm with approved coloured code completed all as specified.

Supply only FRLS insulated single core unsheathed multistranded copper conductor 1100 volt 4 sqmm with approved coloured code completed all as specified.

Supply only heating element of 2 KW triangular type with nut bolt washer complete all as directed.

Supply only heating element of 2 KW circular type with nut bolt washer complete all as directed.

Supply only heating element of 1.5 KW triangular type with nut bolt washer complete all as directed.

Supply only non return valve 15mm dia (ISI Marked) for Geysers of 50/35/25 Ltr capacity including GI Socket,Nipple, elbow ,bend etc and connecting up complete all as directed.

Supply only for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge.

S&F of thermostat for 25/35/50 ltrs capacity of geysers complete all as directed.

Supply only hylum sheets 3 mm thick (ISI marked) of the following sizes

(a) Sheet 4" x 4" single cutting suitable for one piano switch

(b) Sheet 4" x 4" two cuttings suitable for two piano switches

(c) Sheet 4" x 7" three cuttings suitable for three piano switches

(d) Sheet 4" x 7" one cutting for 6 Amp socket and two cuttings for piano switches

(e) Sheet 8" x 10" incl cuttings for switches and sockets 6/16Amps as directed.

(f) Sheet 10" x 12" incl cuttings for switches and sockets 6/16Amps as directed.

supply and fix recessed mounting LED FLAT panel 2"x2" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20 Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed.

Supply and Fix in repair 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete as specified and directed.

supply only 12 MODULE plate suitable for modular switch and socket in white colour.

supply only 8 MODULE plate suitable for modular switch and socket in white colour.

supply only 6 MODULE plate suitable for modular switch and socket in white colour.

supply only 4 MODULE plate suitable for modular switch and socket in white colour.

supply only 3 MODULE plate suitable for modular switch and socket in white colour.

Schedule of Credit

imran construction company

LAMBA ENTERPRISES

GIAN ENGINEERS

SHREE RAM BUILD TECH

M/S Sunil Steel Works

JYOTI ENTERPRISES

M/S MSD & Associate

VED PRAKASH ARORA

VIJAY KUMAR GUPTA