A. Complete repairing of one set conveyor chain drive shaft assembly etc (BOQ 1-9) B. Repairing with Rectification of wearing and replacement work of worn out RH and LH liner plate (BOQ 10-23) C. Repairing of under carriage with top and bottom m s pl

Amount

Drive shaft both ends badly damaged & worn out bearing seat full round multi layer welding & machining as per std size of 23936D/R Roller bearing size

Drive shaft both end damaged & worn out false place/bearing stopper full round multi layer welding & machining as required.

Drive shaft dust seal plate inbuilt with drive shaft badly damaged & worn out seat re buildup multi layer full round & machining dust sealing colors increasing as required.

Providing and fitting of double roller bearing 23936W33

Damaged & worn out bearing housing back side dust seal seat bearing colour Diameter increasing by welding method full round upto 15mm height Increasing x 350mm dia meter x 16mm thick as required & machining on lathe machine with allignment setting LH & LH

Body housing damaged side metal filling unwanted cheeps grinding machining drilling groove cutting for grease pipe & m/c polishing alignment checking.

H.T. bolts with spring washer for bearing cover

H.T. bolts with spring washer for bearing housing

Drive shaft complete assembly including bearing housing bearing cover setting with proper alignment adjustment commissioning etc done at konar exp. Site

Gas cutting of damaged right side wearing plate in place 50" long X 12" width

Cutting of supporting plate which is weld with body side.

All welding particles cutting & cleaning of wearing edge plate support wall plate body side etc.

Setting & alignment of wearing edge plate new welding with wall plate lower side 12 ^ prime prime in layer alling with new edge plat V gauzing 72" long for jointing welding (a)Gas cutting work in above

setting & alignment of wearing edge plate new welding with wall plate lower side 12" in four layer alling with new edge plat V gauzing 72" long for jointing welding (b)Special jointing steel welding work

New wall plate making by gas cutting of side 1/2 ^ prime prime thick X 48" long x 44" and new plate making for making for body side of size 50" long * 6 " width x ½" Thick as required.

Body side supporting plate setting & chain welding.

Setting and alignment of wall place in side full welding 50" ling double layer by special jointing steel electrodes.

Damaged bend and worn top lining liner plate in front roll change by gas cutting place cleaning V gauzing/grooving new 48" new plate cutting setting & triple layer welding by social steel joint electrodes total gas cutting" total electric welding:- Total Gas cutting

Damaged bend and worn top lining liner plate in front roll change by gas cutting place cleaning V gauzing/grooving new 48 ^ prime prime new plate cutting setting & triple layer welding by social steel joint electrodes total gas cutting" total electric welding:- Total Electric Welding

Tail End side damaged & worn out mother plate changing by gas cutting cleaning V groove/ gauzing new 31 ^ prime prime *24^ prime prime size plate cutting setting & full double layer welding by special Steel jointing electrodes.Total gas cutting work

Tail End side damaged & worn out mother plate changing by gas cutting cleaning V groove/ gauzing new 31 ^ prime prime *24^ prime prime size plate cutting setting & full double layer welding by special Steel jointing electrodes. Total Electric Welding.

Worn out and top liner plate removing by gas cutting from tall end to drive end both side including counter lock side plate place.

New liner plate properly setting of top liner all places as per required measurement & after properly setting all sides full chain welding by special steel electrodes including all counter sliding lock hole all sides full round welding in double layer as required.

Complete removing of 12 mm worn out m s plate by industrial gas and bottom ms plate of under carriage having length 20feet and width 4.5 feet

Gas cutting of 12 mm side plate and required size.

Gas cutting of structure Channel having 4 feet required 36 nos. total length of cutting

After grinding Welding of 12 mm bottom plate in two layers by special steel electrode.

After grinding welding of 12 mm side plate in two layer by special steel electrode..

After grinding Welding of structure channel having 4 feet required 36nos. total length of cutting

Total impact of GST for the purpose of CTC

M/S TIGER ENTERPRISES

M/S VISHAL ENTERPRISES