Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC PLOT NO 261 SHANTI KUNJ ALWAR 301415 RAJ | ALWAR | RAJASTHAN | 301415 | L1 | Accepted-AOC Being lowest one | |
| 2 | L2₹30.5 L+₹19,082 (0.63%)Rejected-AOC 60 MADHUVAN BANK COLONY ALWAR | L2 | Rejected-AOC Not lowest | |
| 3 | L3₹33.9 L+₹3.7 L (12.2%)Rejected-AOC | L3 | Rejected-AOC Not lowest | |
| 4 | Rejected-Technical | - | Rejected-Technical Adverse remarks in WLR |
Tender Value
₹36.6 L
EMD Value
₹73,200
Closing Date
27 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
SPL REPAIR TO MD ACCN BLDG NO P-579/01 TO 08 AT ZORAWAR MARG UNDER AGE B/R-I AT ITARANA CANTT ALWAR
2023_MES_613367_2
8195/E8
Open Tender
Civil Works
Item Rate
180 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
GE Alwar
₹73,200
Yes
23 Apr 2024
18 Sept 2023
29 Sept 2023
18 Sept 2023
27 Sept 2023
21 Sept 2023
18 Sept 2023 - 20 Sept 2023
Amount
Demolition of brick/stone masonary built in cement/ lime mortar of any mix including all quoins pillar ashlars masonary and removal complete all as specified & directed.
Demolition of cement concrete (un-renforced) in ground floor and paving exc 15 cm thickness (below or above ground level) & removal of rubbish material complete all as specified & directed.
Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removing the dismantled material complete all as specified and as directed.
Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each & removing to store.
Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each & removing to store complete all as specified & directed.
Taking down shutter of any descriptioon exc 1 Sqm but n exc 2 Sqm each complete all as specified & directed.
Dismantling floor hearth or wall tiling of any description and pattern including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.
Taking up or down 15mm bore steel tubing and connection incl cleaning for refixing or removal to store.
Taking up or down 20mm bore steel tubing and connection incl cleaning for refixing or removal to store.
Dismantling/demolition water tanks of capacity exc 250ltr but not exc 500 ltr and removing from site complete all as specified & directed.
Dismantling of 110mm bore PVC(SWR) drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified & directed.
Dismantling of 75mm bore PVC(SWR) drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified & directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified & directed.
M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.
M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in CM 1:4 complete all as specified and directed.
M&L solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Styles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed.
S&F 35mm thick 2nd class hard wood factory made panelled door shutter(two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified & directed.
S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc; sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed.
S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed tinned tacks or GI wire stampe or nails and screws complete all as specified & directed.
S&F 3mm thick sheet glass, ordinary quality, in squares n exc 0.5 sqm each pane complete all as specified & directed.
M&L preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified & directed.
S&F Butt hinges 100mm long medium weight, stainless steel complete all as specified & directed.
S&F 150mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed.
S&F 150mm 'D' type aluminium handles, anodised complete all as specified & directed.
S&F MS pressed bow handle of 150mm size oval type stove enamelled black & fixed complete all as specified & directed.
S&F anodised aluminum alloy with galvanised mild steel hing pin butt hinges 100mm long complete all as specified & directed.
S&F MS barrel tower bolt 200 mm long stove enamelled black with bright bolt & fixed complete all as specified & directed.
S&F MS sliding door bolt with hasp and staples type, 300mm long stove enamelled black with bright bolt not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple plate and fixed all as specified.
S&F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed complete all as specified and directed
S&F steel ventilator with top hung shutter including hinges steel peg stay etc complete including taking down.
M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, cooler stands (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as specified & directed.
M&L flat iron as in hold fast, hooks, cleats welded to angle iron door/window frames etc complete all as specified and directed.
S&F steel windows box type with side hung shutters including projecting type hinges with steel handle 150mm, and steel peg stay, complete with glazing bars, dovetailed or welded & factory made (XW2)M/F) double shutter, openable shutter with glazing bars and other openable shutter without glazing bars, fabricated with members of standard size as shown on drawings including frames complete all as specified. Note :- The quoted rates shall be deemed of lugs and FI required for fixing wire cloth, sheet glass, grills, iron mongry and guard bars as shown on drg.
Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.
Cutting holes in brick/stone walls n. exc. Half brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and directed
S&F mild steel cupboard shutter with frame, Godrej pattern made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock vertical type size 65mm 4 lever with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12 mm dia bolt 150mm long grouted in brick wall/concrete including making good the disturbed surface as original complete with and including taking down shutters of any description all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.
S&F in repair drapery curtain rod of metalic 25mm dia covered with PVC coating complete with MS bracket golden colour rings as required at site and side caps fancy type fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed.
M&L 25mm thick, PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate), as in sub base complete all as specified & directed.
M&L coloured joint free non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM 1:6 all as specified & directed.
M&L non skid ceramic tiles 7 to 8mm thick (square/ rectangular) colored tiles area of each tiles exc 0.11 sqm but n.exc. 0.18 sqm in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over with and including 15mm thick screed bed in CM 1:6 complete all as specified & directed.
M&L 75mm thick PCC 1:3:6, type C1 (using 20mm graded stone aggregate) as in plinth protection finished fair and even complete all as specified & directed.
M&L glazed ceramic coloured tiles in vertical surface 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over with and including 10mm thick rendering in CM 1:4 complete all as specified & directed.
M&L granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types and over with and including 20mm thick cement concrete screed bed in CM 1:6 complete all as specified & directed.
M&L machine cut kota stone riser steps skirting dado slab flooring 20-25mm thick over with and including 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.
M&L plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in landing, chajjas, shelves and similar articler as directed including necessary formwork/scaffolding complete all as specified & directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item 48.00 above but 6 to 8 mm dia TMT bars.
M&L rendering 10mm thick in CM 1:6 on brick work or concrete surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement all as specified.
M&L rendering 15mm thick in CM 1:4 on brick or concrete wall surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound all as specified. Note : Water proofing compound to be measured and paid paid separately as supply only).
Supply only Integral waterproofing compound.
M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.
M&L preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified & directed.
M&L preparing newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer on walls including 2mm thick wall putty complete all as specified & directed.
M&L complete removing of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil greasy spots etc on old decorated surfaces of wall and applying two coats of oil bound distemper of approved shade/tint over a coat of primer over and inclucluding 1 mm thick Birla white wall care putty complete all as specified and as directed.
M&L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified & directed.
M&L preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified.
S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed by Engr-in-Charge.
S&F 20mm GI tubing Medium grade fix to wall/floor complete all as specified & directed.
S&F in repair PVC connection pipe, 15mm dia & 600mm long with adopter and washer at both end complete all as specified & directed.
S&F Rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed.
S&F ball valves brass high pressure with polythelene float and fly net complete, screwed, iron pipes 15mm dia complete all as specified & directed.
S&F in repair fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed bore in dia 15mm complete all as specified & directed.
S&F in repair white vitreous china wash hand basin 'Flat back' of size 450mm x 300mm fixed on and including new brackets CP waste coupling and PVC waste pipe complete all as specified & directed..
S&F in repair stop valves,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified & directed.
S&F in repair Stop/angle valves, fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified & directed.
S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed
S&F PVC waste pipe of 32mm bore of suitable length for WHB/Urinal/sink complete all as specified and directed.
S&F in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.
S&F in repair sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.
S&F in repair vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440mm, white with integral foot rest and 'P' or 'S' trap, including provision of Cement concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing surface all as specified and directed.
S&F in repair PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia complete all as specified & directed.
S&F in repair 15mm dia CP pillar tap fancy type cast copper alloy, CP with capstan head, screwed down high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shank and fly nuts screwed for iron pipe and fixed complete all as specified & directed.
S&F in repair brass chromium plated shower rose 125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified & directed.
S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges of Brass chromium plated complete all as specified & directed.
S&F in repair stainless steel plate rack 1mm thick of size 900mm x 900mm x 250mm including fixed with rawl plug and screws on walls complete all as specified & directed.
S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified & directed by Engr-in-Charge.
S&F PVC (SWR) bends any radius 110 mm bore complete all as specified & directed by Engr-in-Charge.
S&F PVC (SWR) vent cowl 110mm complete all as specified & directed.
S&F PVC (SWR),110mm junction single, (Single T) equal or unequal complete all as specified & directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls and making good the disturbed surface as per existing complete all as specified & directed.
S&F PVC (SWR) bends 75mm dia any radius complete all as directed.
S&F PVC (SWR) junction single(Single T) equal or unequal 75mm dia complete all as directed.
S&F in repair grating doom 100mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified & directed.
S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed.
S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed.
Demolition mud in roofs, any thicknes, including plastering, existing treatment and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed.
M&L 25mm thick, PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated as in leveling course, laid and compacted in min slope 1:30 over roof complete all as specified & directed.
M&L screed laid 15mm thick in CM 1:4 with water proofing compound over green concrete surface(WPC will be measured and paid seperately as supply only) surface finished even and smooth (without using extra lime or cement) complete all as specified & directed.
M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces over bituminious primer complete all as specified & directed.
M&L APP based plymeric membrane weighing minimum 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven reinforcement/mat (center core) with thermal insulation laid by torch on application method with overlaps 100mm on length side and 100mm on the width side as per manufacture,s instructions with fabric (wt not less than 150 gms/sqm) on primed surface complete all as specified.
M&L 75mm thick PCC(1:4:8) type D2 (using 40mm graded stone aggregate ) as in sub base complete all as specified & directed.
M&L 25mm thick Sand cushioning under floors complete all as specified & directed.
M&L 60mm thick machine pressed precast conctete interlocking rubberized paver block with grey cement and pigment any shape and size confirming to IS 15658-2006, M-35 grade complete all as specified & directed.
M&L PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified & directed.
M&L plain cement concrete 1:3:6 type C-1 (using 12.5mm graded stone aggregate) set in CM 1:4 as in kerb blocks with plain fair faces including chamfered weathering throating etc complete all as specified & directed.
Cutting holes in brick walls exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and directed.
Precast RCC (1:2:4) type B-1 in manhole/soak well/septic tanks slabs/covers etc including necessary form work complete set in CM 1:6 complete all as specified & directed.
M&L framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or E-165 complete all as specified & directed.
Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) all as specified & as directed.
M&L rough cast plaster on exterior walls applying the under coat of cement and sand mortar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm) mixed with coarse sand, cement and aggregate in the ratio of 1:1:1 shall be applied and finished even .The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified & directed.
Treatment for sunken portion as per folloing course of treatment:- M&L water proofing treatment in sunken floors as described hereunder:- 1) Demoli+B119tion of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. 2) PCC (1:2:4) type B0, covered filling in sunken portion 75mm thickness shall be provided at the junctions of RCC slab and adjoining walls. 3) Sunken floor and sides upto finished floor level shall be plastered with 15mm thick plaster in CM 1:4 wixed with WPC@ 3% by weight of cement. 4) Applying bitumen primer of sunken floor & side surfaces TANKMASTIC of M/s STP Ltd @ 0.40 ltr/Sqm. 5) Sunken portion shall be filled with lean concrete (1:5:10), Type E-2 using 40mm aggregate after carring out of satisfactory testing of CIpipes/Joints & Slab/walls by filling water 72 hrs. The sunken portion of Nahani trap/floor trap and pipes, joints shall be emmbeded in PCC (1:3:6) blocks. 6) GI Spout pipe 32mm dia and 450mm long cross cutted ends shall be inserted at the time of repair to Sunken portion as directed. Note:- i) In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. This process of grouting and testing shall be repeated till leakage/ seapage/ dampness is elimaneted. ii) Horizontal flat area only measured. iii) Above aspets are deemed to be included in quoted rate.
Taking down carefully copper/aluminium point wiring for one light /socket/power point and taking down of teak wood batten/ PVC casing caping and making good disturbed surfaces of walls/ ceiling/ floors etc including dismentling of fittings complete all as specified.
M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke & heat (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm external dia) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part-I, ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light point controlled by one way switch all as specified & directed. Note : The quoted rate shall be incuded cutting, chasing, making good of distrub surfaces including matching of existing colour surface of walls.
All as per serial item No 108.00 here-in-before but for one fan point controlled by one switch and regulator.
All as per serial item No 108.00 here-in-before but for one exhaust fan point controlled by one switch and regulator.
All as per serial item No 108.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.
All as per serial item No 108.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.
All as per serial item No 108.00 here-in-before but for one bell/buzzer point controlled by one bell push.
All as per serial item No 108.00 here-in-before but for one light point controlled by two, two way switches.
All as per serial item No 108.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.
S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.
S&F switch piano flush type, single pole, two way, 5 Amp, 230 Volts complete all as specified and directed.
S&F bell push flush type, single pole, 5 Amp, 240 Volts complete all as specified and directed.
S&F bell buzzer AC 230 volts, single pole, complete all as specified and directed.
S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified and directed.
S&F socket outlet for 3 pin (with 2 pin outlet also), 5/6 Amp, flush type 240 Volt complete all as specified and directed.
S&F socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 Volt complete all as specified and directed.
S&F ceiling rose surface bakelite 65 x 50mm two or three terminals complete all as specified and directed.
S&F stepped type electronic fan regulator, flush type and connecting up ISI marked 240 volts complete all as specified & directed.
S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Make :- Havells Cat Part No LHEXBHP71NW018 or equivalent of Philips/ Crompton Greaves /Bajaj/Wipro.
S&F LED type street DRACO SERIES light luminaire 20 Watt, 230 Volts, 50 Hz including all necessary fitting accessories and LED complete all as directed. Make : C&S Cat Part LTESS20WLED or equivalent of Crompton Greaves/Wipro
S&F lamp holder PVC/Polycarbonatetype with back plate suitable forbatten fittings complete all as specified.
S&F LED bulb energy saving 10/11 watt complete all as specified and directed.
S&F sheet metal enclosures, double door type, suitable for fixing TPN with 200 Amps rated bus bar, 4 way, TPN 415 volts complete all as specified and directed.
S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.
S&F MCB 63 Amps, three pole & neutral, 415 Volts complete all as specified and directed.
S&F MCB 32/40 Amps, single pole & neutral, 240 Volts complete all as specified and directed.
S&F MCB 6-40 Amps, single pole, 240 Volts 'C' curve, 10KA ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed.
S&F 2nd class hard wood rectangular block open recessed of size 30 x 25 x 5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug(4 Nos) complete all as specified and directed.
Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 25 sqmm 4 core laid in trenches, along poles through pipes etc with and including taking down old unserviceable XLPE cable complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately . (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
Excavation in trenches n.exc 1.5M wide and n.exc 1.5M in depth for foundation and getting out in soft/loose soil all as specified and directed.
Returning, filling in, spreading, levelling, watering and well ramming in layers n.exc 25cm deep as in soft/loose soil copletete all as specified.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.
M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.
M&L dry sand (tibba sand) and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.
M&L 40mm grade GI pipe (light grade) for protection of LT cable fixed to wall /pole /road crossing including clamps complete all as directed.
M&L sub main wiring with two runs of 6 sqmm (nominal area) size main cable & one run of 6 sqmm size earth continuity conductor, single core, PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked (IS: 694) cables, drawn through & including suitable size of heavy duty PVC conduit ISI marked not less than 32mm dia (external) with wall thickness not less than 1.8mm & conduit fittings/accessories, fixed on surfaces of wall/ceiling complete all as specified and directed. Note:- 02 runs of 6 sqmm size, 01 run of 6 sqmm size cable & conduit with accessories shall be measured as one run length for payment purpose.
Disconnecting from elect connection and taking down carefully the existing electric energy meter of any capacity, any make, any size and depositing the same in AGE E/M Store Yard all as specified and directed by the Engineer-in-Charge. Refixing the same inside the old meter inside box carefully including necessary electric connections complete all as directed.
Disconnecting from elect connection and taking down carefully the existing ceiling fan/exhaust fan/geyser of any capacity any make, any size and depositing the same in AGE E/M Store Yard all as specified and directed by the Engineer-in-Charge. Refixing the same ceiling fan/ exhaust fan/geyser carefully including necessary electric connections complete all as directed.
S&F in repair cubical metallic box of size 1.00m x 0.90m x 0.30m depth made out of 2mm thick mild steel sheet, front openable, double door with locking arrangement with & including 3mm thick plain sheet clear glass of suitable size fixed to facilitate meter reading, all internal & external steel surfaces painted with two coats of synthetic enamel paint over a coat of red oxide primer, internal wiring with PVC insulated single core multistranded copper conductor FRLS cables IS-694 marked of adequate size but not less than 6 sqmm with proper ferrule & cable gland, box shall be fixed on wall with ‘Anchor’ type /fastener type bolts & nuts (Set of 6 bolts of 12mm dia 200mm long with nuts & washers) grouted into the wall properly to hold the box, writing MES No/Qtr No for each energy meter with thick white synthetic enamel paint, Neoprene rubber gasket shall be provided for proper sealing, box shall have arrangement for fixing electric energy meters – 06 Nos, MCB DB SPN 2 way – 06 Nos, MCB DB SPN 4 way -01 No complete all as directed. Note : Existing electric meters 06 Nox, will be taking down carefully and refixing the same inside the new meter box carefully.
M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed.
M/S JINDAL ENTERPRISES
M/s S Amarjit Singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .