Construction of shed in chhota Central Park Kanpur Nagar

Earth work in excavation in foundation in ordinary soil up to 1.5 mtr lift & 30.0 mtr lead etc all complete.

1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size DSR 4.1.8

Providing and laying cement concrete 1:1.5:3 Retaining Walls return wall Wall (any thickness) including attached pilaster coloumns piers abutments pillars posts struts buttresses string or lacing course parapets coping bed blocks plain window sills fillets sunken floor etc . up to floor five level excluding the cost of centring shuttering and finishing.. 20 mm nominal size ...... Complete item DSR

MS or iron work in plain work such as reinforced concrete wrought to required shape as necessary including bending for proper completion of the work.As Per Analaysis

Brick work with common burnt clay (Non Modular) Bricks of class-150 in foundation and plinth in: cement mortar 1:6 DSR 6.1.2

12 mm thick 1:4 cement coarse sand plaster ….. Complete item

Painting on ms Structure…....... Complete item

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. SI.No-10.15.1

Providing and fixing foundation bolts including nuts & washer complete. ( DSR : 10.20)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR : 12.50)