Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.1 LAccepted-AOC VPO DHANNA DISTT KATHUA J K PIN 184152 | KATHUA | JAMMU AND KASHMIR | 184152 | L1 | Accepted-AOC lowest | |
| 2 | L2₹25.1 L+₹5.7 L (29.1%)Rejected-AOC VILL DANNA PO TEH BASANTPUR DIST KATHUA JAMMU KASHMIR | BASANTPUR | KATHUA | JAMMU KASHMIR | L2 | Rejected-AOC not found lowest | |
| 3 | L3₹26.0 L+₹6.5 L (33.5%)Rejected-AOC | L3 | Rejected-AOC not found lowest | |
| 4 | L4₹29.6 L+₹10.1 L (51.8%)Rejected-AOC | L4 | Rejected-AOC not found lowest | |
| 5 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
3 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Basoli
GE Basoli PO lakhanpur Distt Kathua JK
CERTAIN REPAIR TO OTM AND MD ACCN IN POCKET A AT JANGLOT GRN UNDER GE BASOLI
2022_MES_528692_2
GE/BAS 31/2022-23
Open Tender
Civil Works
Item Rate
180 days
Basoli GRN under GE Basoli
Class D , category a(i)
7 documents required · 7 mandatory
₹500
GE Basoli
₹50,000
Yes
2 Jan 2023
6 Aug 2022
5 Sept 2022
6 Aug 2022
3 Sept 2022
20 Aug 2022
Amount
Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm complete all as specified and as directed .
Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed .
Taking down shutters of any description exc 1.0sqm and n.exc 2.0 sqm complete all as specified and as directed .
S&F in repair PVC board 18 to 20mm thick prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/angle iron frame work etc, weight not less than 12 Kg/Sqm complete all as specified and as directed .
S&F Solid PVC door frame (single rebated )of size 60mm x 30 mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screw complete all as specified and as shown on drawing. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
S&F factory made solid panel PVC Mounlded door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frames shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail: Paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with 5mm x 15mm wide PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.
S&F factory made Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with shash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a), complete all as specified and as directed .
S&F Plain framed factory made 35mm thick shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered partical board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated, complete all as specified and as directed .
M&L 1.25mm thick factory made, pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 105x60mm, complete all as specified and as directed .
M&L 1.25mm thick factory made, pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 125x60mm, complete all as specified and as directed .
M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in back filling of chowkats, complete all as specified and directed .
M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25mm thick MS Sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing shown on drg welded to GI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed .
S&F aluminium anodized doors standard JINDAL or equivalent section size 63.5 x 38 x 1.6mm for frame and section size 47.62 x 44.45 x 1.18mm for vertical style section size 46.72 x 44.45 x 1.4mm for top and central rail section size 95.25 x 44.45 x 1.16mm for bottom rail, section size 19 x 17.3 x 0.80mm for glazing clip for shutter including fabrication to required size and glazed with 5mm thick dark tinted glass including fitting etc including necessary jointing cleat aluminium glazing clips, rubber neoprene packing handles 2 Nos in each door hinges anodised aluminum snap beading screw, mortice lock heavy duty complete all as specified & directed. (Note:- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.)
S& F Aluminum door closer hydrulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg , complete all as specified and directed .
S&F for Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame with self drilling screws as per manufacturing instruction and complete as per specification and drawing.
MS 300mm ordinary rat tail rod pattern springs including roller and roller plate.complete all as specified and directed .
S&F Mild steel hinges medium weight cold rolled size 100mm. complete all as specified and directed .
S&F aluminium handle ,cast type, anodised ,150 mm size, complete all as specified and as directed .
S&F aluminium anodised barrel tower bolt of extruded section 150 mm long, complete all as specified and as directed .
M&L for prepration of new wooden surfaces and applying applying two coats of synthetic enemal paint over one coat of pink primer , complete all as specified and directed .
S & F floor stopper 150mm length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed .
S&F in repair, Stainless Steel plate rack of size 900mm x 900mm x 250mm made out by 0.80mm thick sheet, complete all as specified and as directed . Make: Blue Star/ Neelkamal
S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, for wash hand basin / sink, complete all as specified and as directed .
S&F in repair Sink with drainage board made of stainless steel made out by 0.9 mm thick sheet, kitchen or labouratory sink with plug washers,and waste pipe, including bedding in CM to drwaf wall or including fixing cantilever brackets and conecting union to pipe over all size 915mmx450mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed . Make :- Nirali / Neelkamal/ Blue star
S&F in repairs 15 mm cp bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed .
S&F in repairs CP angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed bother ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed .
S&F chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union, complete all as specified and as directed .
S&F in repairs chromium plated health faucet ABS body with 1.25 mtr long flexible tube and ABS wall hooking includinf making connections and fixed in position complete in all respect as specified Make : CERA/ Hindware/ Parryware
S&F steel water tubing galvenised, 15mm bore, medium grade with all fittings and fixed to walls, concealed in wall including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed .
S&F steel water tubing galvenised 20mm bore medium grade with all fittings and fixed to walls, ceiling or laid in floor etc and taking up or down steel water tubing and connection complete all as specified and directed .
S&F in repairs rotational moulded PVC water storage tank 1000 ltr capacity (cylindrical vertical with closed top) hoisted & fixed in position including PVC flot valve 20 mm, all as specified in SSR Part-I, complete all as specified and directed .
S&F in repair rotational moulded PVC water storage tank 500 ltr capacity (cylindrical vertical with closed top) hoisted & fixed in position including PVC flot valve 20 mm, all as specified in SSR Part-I, complete all as specified and directed .
S&F in repair Vitreous china bowl urinal Half stall type (white) minimum with grating and union for discharge pipe including PTMT spreader of any colour for fixing with 15mm dia pipe, Make of urinal:- parryware, Hindware or Cera mark , complete all as specified and as directed .
S&F in repair vitreous china urinal partition white of size 310 x 700mm of parryware, Hindware or Cera mark, complete all as specified and as directed .
S&F in repair Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and as directed .
S&F in repair Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe of 15 mm bore, complete all as specified and as directed .
S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed .
S&F Curtain rod 20mm dia of ms powder coated with including PVC brackets , Stops, rollers etc.complete all as specified and directed .
S&F in repairs flushing cistern with 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc.complete all as specified and directed .
S&F in repairs water closet squat pattern with vitreous china white Ist quality water closet Orissa pattern size 580x440 with integral foot rest and cast iron P or S trap , complete all as specified and as directed .
S&F in repairs wash down water closet (Pedestal pattern) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed .
S&F in repairs EWC seat cover (white) flat bottom solid with CP hinging device, nuts and bolts and connections etc., complete all as specified and directed.
M & L rendering 15mm thick in cement mortar 1:6 and finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and preparation of new plastered surfaces and applying one coat primer & two coats of distemper oil emulsion over 3mm thick wall putty complete all as specified and directed .
M & L rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and preparation of new plastred surfaces then applying two coats cement base paint on walls over a coat of white wash complete all as specified and directed .
M&L rendering 10 mm thick in CM 1:3, on ceiling, etc. finished even and smooth without using extra cement including taking down cement plaster any description including raking out joints, hacking for key and scrubbing down with water etc and Preparation of new pastered surfaces of ceiling and applying three coats of white washing all complete and as directed
M&L applying one coat of synthetic enamel paint including preparation of wood and wood based surfaces of any description exc 10cm width or girth complete all as specified and directed .
M&L applying one coat of synthetic enamel paint including preparation of steel and iron surfaces of any description exc 10cm width or girth complete all as specified and directed .
M&L applying one coat of white wash including preparation of old decorated or unplastered surfaces of ceiling including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed .
M&L for Preparation of old white washed surfaces of wall (plastered or unplastered) for white washing and applying one coat of white wash complete all as specified and as directed .
M&L for preparation of old colour washed surfaces of wall (Plastered or unplastered) for colour washing and applying one coat of colour wash, complete all as specified and as directed .
M&L preparation of old surfaces of wall (plastered or unplastered) and applying one coat of cement base paint, complete all as specified and as directed .
M&L applying one coat of oil bound distemper including preparation of old decorated or unplastered surfaces of wall including cornices, pilasters by brooming down or steel wire brushing, scrapping down, smoke soot moulds, moss and efflorescent salts and greasy spots and complete all as specified and directed .
Dismantling asbestos cement (Corrugated, Semi corrugated, etc,) sheets in roof covering in any location and any position, complete all as specified and directed .
M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm (TCT) of approved colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and as directed .
M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm (TCT) of approved colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and as directed .
S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement, complete all as specified and as directed .
S&F in repair PVC shelves of PTMT ( minimum weight 300 grm) fixed with and including chromium plated brass screws and wooden /plastic cleats, complete all as specified and as directed .
S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges, complete all as specified and as directed .
Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, washing with lime water etc and hoisting after cleaning and removing all as specified and directed etc from tanks of circulating pipe etc of capacity upto and including 500 ltrs and endorsed the ward "CLEANED ON WITH DATE" with white paint including replacement of broken/unserviceable fitting such as Elbow, tee, socket, nipple of any size etc complete all as specified.
Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, washing with lime water etc and hoisting after cleaning and remving all as specified and directed etc from tanks of circulating pipe etc of capacity exc 500 ltrs and upto & including 1000 ltrs and endorsed the word" CLEANED ON WITH DATE' with while paint including replacement of broken/unserviceable fitting such as Elbow, Tee, socket, nipple of any size etc complete all as specified.
S & F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for 15 mmm bore of pipe all as specified & directd.
S & F in repair ball brass valves, high pressure, (ISI Marked) with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for 20 mmm bore of pipe all as specified & directd.
Demolition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed .
M&L for Pre-polished glazed designer ENDURA tiles, coloured 30cm x 30cm x 10cm thick set jointed and pointed in neat cement slurry pointed in white or coloured cement to match in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L 75 mm thick PCC (1:3:6),Type C-2 (using 40mm graded stone aggregate) in plinth protection etc.laid in alternate bays , complete all as specified and as directed .
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed .
S&F Figured glass 3mm thick , pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified and directed .
Taking down ,dismantling of broken/loose portion of chajja ,facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (including white wash /colour wash or cement base paint )chajja upto 2nd floor, complete all as specified and directed .
M& L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg) of uniform thickness 50mm , top surface of plain concrete padding shall be finished even & fair with out using extra cement complete all as specified and directed .
M&L for roof treatment with the following specification - Removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished with two coat aluminium paint @ 0.20 Kg/sqm over APP membrane, rendering 15mm thick in CM 1:4 mixed with WPC at the rate of 3% by weight of cement over PCC Pading finished fair and even (WPC measured and paid seperately) . NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.
Supply only integral water proofing compound of make Dr Fixit, complete all as specified and as directed .
M&L repairing steel windows by adjusting and welding the new hinges complete all as specified and directed . NOTE:- The item shall be executed on written complaint of users and approval of GE.
S&F in repairs steel handles left/right for steel windows 150mm size all as specified and directed .
S&F in repairs steel stays 300mm length for steel windows all as specified and directed .
Demolition cement concrete (reinforced) of any description and in any position not otherwise specifically provided for all complete and as specified
M&L Reinforced cement concrete 1:2:4 type B-1,using 20 mm graded stone aggregate as in shelves etc including form work, complete all as specified and as directed .
M&L for TMT Steel bars 8 mm dia cut to length, bent to shape required including cranking bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips , complete all as specified and as directed .
Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed .
M & L Brick work with sub class `B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed .
M&L rendering 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement including preparation of new plastred surfaces and applying three coat of white wash complete all as specified and directed .
M&L in repair by Providing and fixing tiles false ceiling of size 600 x 600 mm including of ceiling tiles in true horizontal level suspended on inter locking matrix 32 mm matel grid of hot dipped galvanised steel section (galvanised @ 120gms per sqm both side incl) consisting of 3600mm long main "T' of size 24x25mm and 0.30mm thick and PPGI sheet wall angle of size 24x24mm and 0.40mm thick. Bottom exposed capping of width 24mm of all T sections shell br 0.25mm thick.PPGI wall angle is fixed aling the perimeter of ceilings to walls, partition or columns etc with rawl plug and wooden screws at 300mm denters. Main T runners are than suspended from ceiling using GI slotted cleats of size27 x37x25x1.6mm fixed to ceiling with 12mm dia and 38mm, long dash fatners, 4mm GI wire spaced at max 1200mm center to center along main T and not more than 150mm with slipped joints, the last hanger at the end of each main runnner should not be greater than 600mm from adjecent wall than 1200mm long cross T is interlocked between the main T at 600mm center to center to form at grid 1200x600mm grid to form grids of 605mmx605mm. cross T at the ends having lenght more than 600mm are to be supported independently. Finally PVC laminated with aluminium foil back board tiles of size 600x600x9mm thick tiles having light reflectors of >=75% are placed in the grid incl dismantling of wall and ceiling board (fiber, pulp, insulation, etc) or insulation boards slabs blankets, any thickness. Make : M/s Everest, M/s Saint gobain, M/s Boral.
S&F in repairs One piece EWC Concealed with Premium plastic seat Cover and twin Flush fittings, etc complete all as specified and directed . Make :- CERA/PARRYWARE/HINDWARE
Taking down cement plaster/wall tile on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles including Glazed ceramic coloured tiles in vertical surfaces 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match. Complete all as specified and directed .
S&F Vitrified ceramic coloured tiles 8 to 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed .
Taking down cement plaster/tile on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles including Virified ceramic coloured tiles 8 to 10mm thick (Square/Rectangular) polished area of each tile not exceeding 0.38 Sqm in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match. Complete all as specified and directed .
S&F Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n . Exc 0.38 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm and Screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes. Complete all as specified and directed .
M&L for Machine cut kota slab flooring 18 to 20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes including Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed .
M&L for Machine cut kota slab skirting 16 to 18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing and taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc and Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed .
M&L Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform including Moulding, rounding , chamfering and making hole for Gas pipe and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade over and including 20 mm thick screed bed in CM 1:4 as for lying slab, complete all as specified and directed .
Ms International Engineers
Ashoka Engineers
M/S SWASTIKA BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .