GE861 EWS-66/2023-24

Amount

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shaft wells, cesspits manholes pier holes etc n exc 10 sqm on plan and getting out soft/loose soil complete all as specified and directed.

Add to item No 1 for each additional 1.5m or part thereof in depth beyond the first 1.5 m complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for RCC, M-25 Design Mix Concrete (using 20mm graded crushed stone aggregate) as in footing, foundation, beam, plinth beam, bases for columns etc complete all as specified and directed.

M&L RCC M-25 Design Mix (using 20 mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC M-25 Design Mix (using 20 mm graded crushed stone aggregate) as in Beams cantilevers, bressummers lintels over 1.5 m span complete all as specified and directed.

M&L RCC M-25 Design Mix (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Form work to sides of concrete foundations, footings, bases of columns, raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finish surface of concrete square, rectangular or diagonal complete all as specified and directed.

Form work to sides and soffits of floor or roof beam, lintels, cantilevers shelves including supports over hangs etc also splays between floors and beams, etc complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 20mm thick (horizontal or sloping) complete all as specified and directed.

M & L for Mild steel TMT 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for Mild steel bars TMT 5 to 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups complete all as specified and directed.

Brick work with sub class 'B' brick straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Rendering 15mm thick on other than fair faces of Brick work or concrete surface in cement mortar 1:4 finished even & smooth w/o using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface as in roof slabs, columns and the like complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling etc. and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of cement base paint over a coat of chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed.

S&F Roof trusses Fe 410-W(Gde-E-250) quality-A (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, or flat section) incl distance pieces cleats etc complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheets 0.50mm thick of any colour having tensile strength of not less than 550 Mpa as in roof coverings/cladding to walls, fixed with self tapping screws complete all as pecified and directed

S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheets 0.50mm thick of any colour having tensile strength of not less than 550 Mpa as in ridges, coverings/cladding to walls and the like, fixed with self tapping screws complete all as specified and directed

M&L for 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one side fixed in ceiling/walls with nails to timber frame complete all as specified and directed

S&F 2nd Class soft wood plain fillets square rectangular or triangular in section clean sawn secured with nails or beads sectional area exc 13 but not exc 25 sqcm complete all as specified and directed

S&F 2nd class soft wood plain fillets exc 3 Sqcm but n exc 6 Sqcm square, rectangular or triangular in section clean sawn secured with nails or beads complete all as specified and directed

M&L for Hard core of broken stone or boulder of gauge n. exc 63 mm deposited, spread and levelled in layers n. exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L for PCC 75 mm thick type D2 , 1 : 4 : 8 (using 40mm graded crushed stone aggregate ) as in sub base of floor complete all as specified and directed.

M&L for PCC 40 mm thick type B1, 1 : 2 :4 using ( using 20mm graded crushed stone aggregate ) as in floor, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 75 mm thick type C2, 1:3:6 using (using 40mm graded crushed stone aggregate) as in plinth protection, path, finished even and smooth without using extra cement complete all as specified and directed. .

S&F Rolled mild steel in Stairs (framed) including stringers, treads, landing, balusters, hand rails etc including cleats brackets etc complete of Fe-410-W (Gde -E-250) Quality A complete all as specified and directed.

M&L for preparation of new steel and iron surfaces exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new steel surfaces of not exc 10cm in width or girth and applying two coats of synthetic enamel paint over coat of primer red oxide zinc chrome primer complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood framed, panelled shutters, factory made (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F MS work in bands, straps, holdfasts and similar small articles conforming to Fe- 290 Gde 165 complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of 150mm length complete all as specified and directed.

S&F aluminium handle150 mm size, cast type, anodized complete all as specified and directed.

S&F butt hinges medium weight MS cold rolled 100mm long complete all as specified and directed.

S&F 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25cm complete all as specified and directed.

Removing excavated materials n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete (foundation for fencing posts and the like) complete all as specified and directed.

M&L for steel work in tubular pole including special shaped washers etc. complete using ERW or butt weld or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed.

M&L for Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410- W(Gde E-250) quality B complete all as specified and directed.

M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per Srl item No-49 here in above but for One 3 pin socket outlet, 5 Amps, on independent board, with cables 1.5 sq. mm size complete all as specified and directed.

All as per Srl item No-49 here in above but for One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size complete all as specified and directed.

All as per Srl item No-49 here in above but for One 3 pin socket outlet, 15 Amps, on independent board, with cables 2.5 sq. mm size complete all as specified and directed.

Supply & fixing switch piano flush type, 05/06 Amps single pole, one way 240 volts complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 6 Amp flush type universal complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 6/16 Amp flush type universal complete all as specified and directed..

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

Supply & fixing of ceiling rose, 3 phase/PVC/poly carbonate isolated body complete all as specified and directed.

S&F decorative ultra slim linear LED 20 Watt 4' long lighting fixture with extruded aluminium heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on and including two nos PVC square box of required size complete all as specified and directed.

Supply and fixing LED lamp 9 W complete all as specified and directed.

S&F LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all specified and directed.

Material & labour for earthing in repiars complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 4mm dia by means of lugs, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm centre to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, Triple pole and neutral, AC, 415 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed.

Supply & fixing MCB, SPN (single pole neutral), AC, 240 volts, B series capacity 32 Amps 10kA and making connections complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire, one twin core cable flat or circular of size 10 Sqmm complete all as specified and directed.

Supply and fixing wall mounted fan 450 mm sweep PVC body with louvers, 240 volts AC single phase, 50 Htz, ISI marked complete all as specified and directed.

M/S GASSI CONSTRUCTION AND CO

MS BHAT BROTHERS

M/S M.S. BUILDERS

M/S KHAN CONSTRUCTION COMPANY (KCC)

M/S BILAL AHMAD BHAT

RASHID CONSTRUCTIONS