REPAIR AND MAINTENANANCE OF ELECTRICAL INSTALLATION IN ADM BLOCK AND OFFICERS INSTITUTE AT BSF CAMPUS KARNAJORA OF SHQ BSF RAIGANJ

Providing and fixinng of 120 Watt high narrow beam in multiple direction at a time rotating flood light having multiple output shapes and design as per site requirement including prividing of required capacity manual controller / remote controller of having range upto 50 mtr etc as required.

Providing and fixing of automatic hands fress infrared based wall mont type hand dryer of capacity 01 KW having following specification Power : 1000 Watt, Carbon brush motor, Build material- 304 Stainless steel for working voltage of 220-240 VAC 50 Hz supply with autocut feature etc as required.. Make - Jaquar / Hindware or as approved by Engg-In-Charge

Supply, Installation, Testing and Commissioning (SITC) of 40 W LED Well Glass Luminaire, pressure die-cast aluminium housing with UV-stabilized polycarbonate/toughened glass diffuser, complete with integral constant current LED driver, system efficacy not less than 110 lm/W, minimum 4000 lumen output, CCT 5700 K (Cool Daylight), CRI ≥70, Power Factor ≥0.95, THD <10%, operating voltage 140–270 V AC, 50 Hz, IP66 protection, surge protection, complete with all accessories including mounting arrangement, hardware, gland, connectors, earthing, testing and commissioning as required and as directed by the Engineer-in-Charge.

Supplying and laying of XLPE insulated PVC sheathed 1100 volt grade aluminium conductor armoured power cable conforming to IS:7098 (part 1) 1988 and ammended upto date of size 2x10 Sqmm direct in ground excluding excavation, sand cushioning and protective covering and refilling the trench etc as required. Emborssing on the cable will be customized and same will be approved by the Engg-In-Charge.

Supply, Installation, Testing and Commissioning (SITC) of 100 W LED Flood Light Luminaire conforming to IS 10322 (Part-5/Section-5) and relevant BIS standards, comprising pressure die-cast LM-6 aluminium housing with corrosion-resistant polyester powder coating, high-transmission heat-resistant tempered toughened glass diffuser, UV-stabilized silicone gasket, high efficiency LM-80 compliant LEDs mounted on metal core PCB (MCPCB), system efficacy not less than 130 lm/W, minimum initial lumen output 13,000 lumens, correlated colour temperature (CCT) 5700 K ±300 K, CRI ≥80, power factor ≥0.95, THD ≤10%, constant current isolated electronic driver having inbuilt protections against input over-voltage, output short circuit, open circuit, overload, over-temperature and surge, input supply 140–270 V AC, 50 Hz, minimum surge protection 10 kV, IP66 ingress protection, IK08 impact protection, L70 life ≥50,000 hours, suitable for continuous outdoor operation under ambient temperature up to 50°C, complete with heavy-duty adjustable hot-dip galvanized/MS mounting bracket, stainless steel fasteners, glands, lugs, ferrules, interconnections, earthing, testing, commissioning and all accessories required for satisfactory operation, complete in all respects as directed by the Engineer-in-Charge