Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹43.8 L+₹1.0 L (2.42%)Rejected-Finance 53 SHANTI S SANIK COLONY BAIRAGARH BHOPAL MP 462 030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹44.8 L+₹2.1 L (4.85%)Rejected-Finance A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹45.8 L+₹3.0 L (7.12%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹47.1 L+₹4.4 L (10.3%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
13 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL, BAIRAGARH, BHOPAL
REPAIRS TO FLOOR PLASTER BRICKWORK AND CERTAIN MISC WORKS AT CHQ 1 TO 4 TRG BN AND HQ COY OF 3 EME CENTRE AT BAIRAGARH UNDER GE BHOPAL
2022_MES_525561_1
8882/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
As per tender documents
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹90,000
Yes
23 Jul 2022
21 May 2022
15 Jun 2022
21 May 2022
13 Jun 2022
4 Jun 2022
60 days
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Hacking out old broken glass (any thickness and any size) from steel/wooden frame, complete all as specified and directed.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.
S&F Figured glass, pin head type 3mm thick and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and directed.
S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.180 mm and fixed and with tinned tacks or galvanised wire staples, complete all as specified.
Demolition of cement concrete in ground floor, (unreinforced) paving nexc 15 cm thick (below or above GL) incl tiling if any, complete all as specified and directed
M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.
M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate in floor, rough finished surface to receive floor finishes, complete all as specified and directed
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M&L for granite (any type) 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25 mm thick over and including 15mm thick screed bed in CM 1:6 etc set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over as in skirting and including 10 mm thick rendering in CM 1:3 set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified.
M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. over and including 20mm thick screed bed in cm 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in verticle surfaces like skirting/dado etc. over and including 10mm thick bedding layer in cm 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
M&L for dark shade/double charged/ultra charged vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. over and including 20mm thick screed bed in cm 1:6 set and jointed in neat cement slurry and pointed in epoxy adhisive complete all as specified and directed.
M&L for dark shade/double charged/ultra charged vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in dado/skirting etc. over and including 10mm thick bedding layer in cm 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 Sqm, but not exceeding 0.11 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed
M&L for Glazed ceramic coloured tiles 450mm x 350mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm, but not exceeding 0.18 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed
M&L for non skid ceramic coloured tiles 7mm to 8 mm thick (square/rectangular) area of each tile exceeding 0 .11 Sqm, but not exceeding 0.18 Sqm on vertical surfaces such as skirting, dado and risers to steps etc over & including 10 mm thick rendering in CM 1:4 set & jointed in neat cement sullry & pointed in white or coloured cement to match complete all as specified & directed.
M&L for heavy duty flooring tiles, harsh weather & UV Resistance, high abrasion resistance, MOH Hardness >6, thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for Hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for Factory made, machine pressed, M-35 grade concrete interlocking paver blocks (glossy /reflective type), with grey cement and pigment, any shape and size conforming to IS:15658-2006 (ISI Marked) of 60 mm thickness with & including 50 mm thick sand cushion and joints filled with sand complete all as specified and directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Demolition of brickwork built in cement or cement lime mortar complete all as specified and directed.
M&L for Brick work with FLY ASH bricks (Modular), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 10 mm thick rendering on fair faces of brick or concrete surface in cm 1:3 as in ceiling finishing the surfaces fair & even without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of putty where required, complete all as specified and as directed. Note : putty shall be measured and paid separately in the respective item
M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat of exterior water base emulsion paint on walls over a coat of primer complete all as specified and as directed. [Make : Asian(ACE) or equivalent in Shalimar/ Burger make as per Appx 'C' (list of make) as approved by GE]
M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coats of oil bound distemper over a coat of putty where required, complete all as specified and as directed. Note : putty shall be measured and paid separately under respective item
M&L for preparation of old plastered or unplastered surfaces of walls and applying one coats of oil bound distemper, complete all as specified and as directed.
Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, and applying two coats of oil emulsion distemper, white or tinted over one coat of white cement based putty (where required) all as specified and directed. Note - (i) Cement Putty shall be measured and paid separetely. (ii) Complete removal of existing surface to be carried out using mechanical scrappers and wiped clean with cotton cloth so that no dust/loose particles remain on the surface complete as directed by Engineer-in-charge. (iii) Hairline cracks upto 3 mm thickness shall be filled with crack seal of M/s Asian Paint or equivalent as approved; quoted rate is deemed to include for this aspect.
M&L for complete removal of existing treatment on wall surfaces and applying two coats heritage/texture finish of approved design/colour over one coat of primer on prepared surfaces complete all as specified and directed. Note : Each stage i.e., preparation of surfaces, application of primer, application of first coat of texture, application of 2nd coat of texture will be got passed.
M&L for applying one coat of white cement based wall care putty 3mm thick on walls complete all as specified and directed. Make- Birla / JK putty
S&F in repairs Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size:- 914mm x 460mm x 203, bowl size:- 405mm x 354mm x 203mm, including CP waste coupling and 32mm dia PVC waste pipe of suitable length complete all as specified and directed.
S&F Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size:- 430mm x 510mm x 203mm, bowl size:- 430mm x 380mm x 203mm, including CP waste coupling and 32mm dia PVC waste pipe of suitable length complete all as specified and directed.. [MAKE:- Prayag (Cat No.1218D Gloss) or equivalent in Blue star/ Nirali/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs PVC low level flushing cistern 10 litres capacity, ISI marked, white, with all fitting and fixtures including brackets, PVC connection of 450mm long and 32 mm bore PVC flush pipe, complete all as specified and directed. [MAKE:- SOMANY (Cat No.121002), Prayag (Cat No.501 Smart flush cistern) or equivalent in PARRYWARE-SLIMLINE/CERA/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (angle type) screwed both ends for iron pipe or for unions 15mm bore, complete all as specified and directed. [MAKE:- Prayag (Cat No.8310) or equivalent in JAQUAR/MARC/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs two way , angle valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (angle type) screwed both ends for iron pipe or for unions 15mm bore, complete all as specified and directed. [MAKE:- Prayag (Cat No.8311) or equivalent in JAQUAR/MARC/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8306) or equivalent in JAQUAR/MARC/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore (minimum weight 90 gms) complete all as specified and directed.
S&F in repairs chromium plated shower rose 125 mm size with swivel joints complete all as specified and directed. [MAKE:- Prayag (Cat No.BS-76) or equivalent in JAQUAR/CERA / make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs Vitreous china wash basin, white, oval type, size 520 x 450mm including CP waste coupling, 32mm dia PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. [MAKE:- SOMANY (Cat No.110501) or equivalent in HINDWARE/ CERA/PARRYWARE/make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs Vitreous china wash basin, ISI marked, white, flat back, size 550 x 400mm, including CP waste coupling, 32mm dia PVC waste pipe of suitable length, brackets and cutting for and pinning in ends of brackets, complete all as specified and directed. [MAKE:- Somany: (LUX) or Prayag (Cat No 4645) or equivalent in CERA/PARRYWARE /HINDWARE as approved by GE.]
S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8302) or equivalent in JAQUAR/MARC/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed
S&F Jet spray (butterfly) with 1 mtr tube complete all as specified and directed. [MAKE:- Prayag (Cat No.BEA-18) or equivalent in JAQUAR / PLUMBER / MARC/ make as per Appx 'C' (list of make) as approved by GE]
S&F hand shower (health faucet) with 8mm dia 1.0 mter long flexible tube and wall hook complete all as specified and directed. [MAKE:- Prayag (Cat No.BH-76) or equivalent in JAQUAR/MARC / make as per Appx 'C' (list of make) as approved by GE]
Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 20mm bore Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Taking up or down 15 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F 15 mm bore Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan, pedestal pattern, ISI marked, white, including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. [MAKE:-SOMANY (Cat No.120403 & 120404) or equivalent in CERA/PARRYWARE /HINDWARE/ make as per Appx 'C' (list of make) as approved by GE]
S&F in repairs 32mm bore PVC waste pipe for wash basin complete all as specified and directed.
S&F in repairs Vitreous china urinal half stall ISI marked, white, with & including chromium plated waste coupling including connections to flush pipe and outgoing pipes complete all as specified and directed.
S&F in repairs Vitreous china bowl urinal flat back, white, with grating and union for discharge pipe including connections to flush pipe and outgoing pipes, complete all as specified and directed.
S&F in repairs Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, white with integral foot rests including provision of cement concrete bedding & ‘P’ or ‘S’ trap complete all as specified and directed. [MAKE:-SOMANY (Cat.No.121115), PRAYAG (Cat No.4055) or equivalent in CERA/PARRYWARE/ HINDWARE / make as per Appx 'C' (list of make) as approved by GE]
S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.
S&F in repair PVC (SWR) bends any radius 110 mm dia complete all as specified and directed.
S&F in repair PVC (SWR) bends any radius 75 mm dia complete all as specified and directed.
S&F PVC (SWR) floor/Nahani trap, plain with CP grating including jointing with solvent cement, dia of outlet 75 mm, complete all as specified and directed.
Dismantling of timber scantling in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section in any position for unframed works, complete all as specified and directed.
Dismantling mild steel work of any description not other wise provided for complete all as specified and directed
S&F angle iron and rolled section as in main and cross beams hip, jack rafters, hollow section purlins, posts, where connected to common rafters and running rails and guides for sliddinng doors fixed with angle cleats or other connecting plates of grade Fe-410, complete all as specified & directed.
Dismantling of wall and celing hard boards/AC sheets and plywood in any thickness and any position including cover fillets, complete all as specified and directed.
M&L for false ceiling with and including 12mm thick recessed edge gypsum board [Boral plaster board] (Make:BORAL of GYPSUM INDIA LTD or equivalent as approved by GE) screwed on GI Metal framework consisting of following:- (i) Perimeter channel of GI sheet 0.50 thick of girth not less than 75mm fixed on walls with steel screw and PVC rawl plugs of size 35mm long @ 450mm c/c. (ii) Secondry section (cross runner) of GI sheet knurled wedge 0.50mm thick girth not less than 103.50mm fixed to main runner @ 600mm c/c with the help of GI wire connecting clips of 2 to 3mm diameter. (iii) The primery section channel (main runner) of GI sheet 0.75mm thick and girth not less than 75mm @ 1200mm c/c suspended by GI sheet angle fixed to MS ceiling cleat with 0.50mm dia and 18mm long MS nut bolt. (iv) MS ceiling cleats fixed to truss, purlins, rafter etc. (v) Providind and fixing 10 to 12mm Gypsum board in different levels as ordered by GE. Joints of Boards shall be finished and sealed with jointing compound (Boral compound or equivalent and paper tape Boral paper tape or any other equivalent paper tape) complete all as specified and as directed.
M&L for galvanised cold rolled steel section frame work size 600x600 grid size 24x38x0.30 mm Tee (bottom pre-coated) and 24x24x0.30 mm thick wall angle, galvanised cold rolled steel section including suspenders as per manufacturs instruction as in ceiling, complete all as specified and direcetd.
M&L for Asbestos free calcium silicate board of size 600 x 600 x 6mm thick fixed to steel frame work as in ceiling, including applying two coats of oil bound distemper, complete all as specified and direcetd.
Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and direcetd.
M&L for 6 mm thick asbestos cement, corrugated or semi courrugated sheets in roofs, walls fixed with L-type or J-type or crancked hook bolt etc.complete all as specified and directed.
M&L for 6 mm thick asbestos cement, corrugated or semi courrugated sheets in roofs, walls fixed with L-type or J-type or crancked hook bolts etc, but except sheet complete all as specified and directed.
M&L for 6 mm thick asbestos cement, corrugated or semi courrugated two piece adjustable plain wing ridge sheets in roofs, fixed with L-type or J-type or crancked hook bolts etc.incl taking down old ridge, complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in ridges, etc, fixed with & including self tapping screws complete all as specified and directed.
M&L framed work such as grills, gratings, gate etc with ends of bars & plates souldered and/or riveted or forged into spikes, framed guard bars barred iron doors ladders framed balusters walkways, railing frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed.
Welding in repair n.exc 2.5cm in length thickness of metal to be welded n exc 6mm thick, complete all as specified and as directed.
Welding in repair exc 2.5cm and n.exc 5cm in length thickness of metal to be welded n exc 6mm thick, complete all as specified and as directed.
Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed
Taking down chowkhats or frame exc 1.5 sqm but nexc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified.
Taking down shutters of any description exc 1.0 sqm and n.exc 2.0 sqm each complete all as specified and directed
S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel ventilator with top hung shutters including hinges with fixed type MS handles peg stay and tower bolt but with additional sash bars MS flats for fixing of wire gauge, complete all as specified and directed.
S&F Solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction, complete all as specified and directed.
S&F double rebate openable /fixed windows made of galvanised steel colour coated /powder coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120 grams /sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick outer frame section 72 x 55mm, centre mullion section 72 x50 mm, shutter section 47 x20 mm, fly mesh section 40 x 20 mm and the fixed glass beading section 12 x12 mm, outer frame and mullion shall consists rebate for glazed shutter, fly mesh and 20 mm provision for guard bars /grills, the sections cut to length mitre joined with corner bracket, centre mullions cap, stay, handles, latch, 2 Nos tower bolts,2 Nos of heavy duty stainless steel pivot hinges per shutter and penelled with 5mm thick plain float glass and SS mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self expanding screws, including 10mm square bars welded to 6x12mm flat at a distance 150mm C/C (pitch) etc. complete all as specified and directed. [Make : NCL Allek Seccolor Ltd (Model :ECO 4000) or equvalent as approved by GE]
S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.
S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR-2004 Part - II, complete all as specified and directed.
M&L for factory made, second class hardwood 35mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.
S&F factory made 40mm thick flush shutters solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified and as directed.
M&L for factory made second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed. Note: - Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a)
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.180 mm and fixed and with tinned tacks or galvanised wire staples, complete all as specified.
S&F for IInd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed complete all as specified and directed.
M&L for factory made Second class hardwood glazed and skeleton window shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc divided in squares, with plain, chamfered or rounded, fitted with cut and mitread beads sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed. Note : sizes of memebers of shutters as specified in SSR Part I, section 8, clause 8.24 (b); supplied and fitted to chowkats complete all as specified and directed.
S&F 100 mm Aluminium handles, cast type, anodised, complete all as specified and directed
S&F 100 mm Aluminium anodised barrel tower bolts extruded section and fixed complete, all as specified and directed
S&F 75 mm mild steel butt hinges medium weight, cold rolled, complete all as specified and directed
S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed
S&F 150 mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed
S&F 250 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
S&F 100 mm but hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and directed.
S&F Floor door stopper 150mm long of aluminium ally body and tonge, anodised, with hard drawn steel spring, fixed in floor complete all as specified.
Taking down aluminium doors upto 4 Sqm each and re-fixing in same position after carry out necessary repairs including replacing rubber/aluminium beading and jointing cleats, tightening if required including making good existing surfaces, complete all as specified and directed. Note:- Any aluminium style, rail, frame, floor spring, hydraulic door closer if required to be replaced will be measured and paid separately under respective items.
Supply only powder coated aluminium fabricated work as in doors, windows, partition as per manufacturer instruction complete including necessary jointing cleats, anodised aluminium snap beading including taking down damage portion of damage doors,windows or taking down complete door/window complete all as specified and directed. Note:Rates are including for necessary new fittings for door/window i.e handle, tower bolt, butt hinges etc complete.
M&L12mm thick Prelaminated particle board, exterior grade,prelaminated both side with decorative choice lamination, fixed to aluminium door, partitions complete all as specified and as directed.
S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg aluminium extruded section body, complete all as specified and as directed.
S&F mild steel bands, hold fasts, wind ties and similar articles conforming to Fe 290 Gde -E-165, complete all as specifeid and directed.
M&L preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.
M&L preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and as directed.
M&L for preparation of old or previously treated surfaces wood/wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old or previously treated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat synthetic enamel paint, complete all as specified and directed.
Deduct Schedule of credit (calculation will be done off line) Rs. 44,410.00
M/S Shanti Enterprises
Jyoti enterprises
M/S Shanti Traders
RAJPATI CONSTRUCTION
M/S BRIJLAL UPADHYAY
ROYAL CONSTRUCTION
POONAM ELECTRIC INDUSTRY
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .