REPAIR / REPLACEMENT OF WOODEN OR ALUMINIUM WINDOW, DOOR, VENTILATORS, WALL PAINTING, CUP BOARDS AND OTHER MISC JOINERY WORK IN TECHNICAL AREA UNDER GE (AF) SRINAGAR.

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exc 1 Sqm and n exc 2 sqm.

Taking down, easing, adjusting of old wooden shutters of any description exc. 1 Sqm and not exc. 2 Sqm each and refixing in same opening after tiling work complete all as directed by Engr-in-charge.

M & L for Easing of Aluminium Door /shutters/CB (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing / opening, tightening of thing, adjustment of tower bolts, sliding bolt etc replacement of rubber beading complete all as specified and directed.

Supply and fixing aluminium powder coated frame for doors, partition, windows, ventilators with one or more rebated including necessary jointing cleats, rubber beading, aluminium powder coated snap beading, screws, aluminium powder coated Flat for fixing etc. Complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)

Supply and fixing aluminium powder coated glazed shutter(for doors) with style and top rail of section 80 x 44mm, 16 Gauge thick and bottom rails of section 112 x 44mm of 16 Gauge thick, middle rail 150 x 44mm of 16 gauge thick fixed on floor spring, both side opening without sash bars but including 5mm thick plain/tinted / heat reflecting glass pan with and necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminium anodized handle, locking arrangement(mortise lock) and aluminuium anodised tower bolt 200 mm long and hydraulic floor door spring Complete all as specified.

Supply and fixing aluminium powder coated aluminium window having three track with aluminium section 92 mm X 31.75 mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40 mm X 18 mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rmt mounted on bearing to slide on tracks plain anodized in approved shade including fixing of 5mm thick sun/heat reflected glass and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner Etc. Complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)

Supply and fixing aluminium powder coated ventilator having fixed glass with aluminium section having section 50.80 mm x 25.40 mm (weight 0.489 kg/m) glazing clear section (weight 0.109 kg/m) with plain anodized including fixing of 5mm thick sun/heat reflected glass making frame and glass water tightening making it good etc. Complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron)

S & F sheet glass 5.5 mm thick, ordinary quality and glazing with aluminium glazing clips and rubber neoprene gasket in square or rectangular, complete all as specified and directed by Engineer-in-Charge.

S&F aluminium composite panels, 5 mm thick as in doors, of any colour, shape, size and design fixed on aluminium frame work including all necessary fittings and fixtures and necessary taping, complete all as per manufactures instructions, complete all as specified.

S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty / wooden beads in square or rectangular in section n exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including hacking out old broken glass from metal frame complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F Figured Glass pin head type 4 mm thick n exc 0.5 Sqm and glazing with oil putty, complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm size butt hinges, Stainless Steel complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete .

S&F 150 mm size, aluminium anodized handles, cast type complete all as specified and directed by Engineer-In-Charge.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S & F in repair stainless steel lock for aluminium door, size 100 mm, 2 levers complete all as specified and directed by Engineer-in-Charge.

S&F sheet glass 5.5 mm thick, ordinary quality and glazing with aluminium glazing clips and rubber neoprene gasket in square or rectangular including hacking out old broken glass, complete all as specified and directed by Engineer-in-Charge.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor of Overall length of cover plate 140 mm all as specified and directed by Engineer-in-Charge

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel over, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-Charge

S & F in repair Aluminium (Extruded Section body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

M&L in repairs wooden paneling of second class softwood 12 mm thick with tongue and groove joint fixed in any position over and including wooden framework in second class softwood with plain fillets square or rectangular in section clean sawn, secured with nails/screws of sectional area exc. 13 Sqcm and nexc 25 Sqcm at nexc. 90cm centre to centre in both direction and including three coats of French polishing on all the exposed surfaces including taking down existing electrical fittings and re-fixing the same locations as directed complete all as specified and as directed by Engineer-in-Charge.

M&L in repair ACP wall cladding 4 mm thick, fixing with 25 x 40 mm aluminium tube section as per manufacturer instruction including joint filling and taping, necessary arrangement and colour will be as approved by GE, complete all as specified and directed.

S&F stainless steel alphabets letters (not less than 2.5 mm thick), height of letter exc 200 but not exc 300 mm including fixing arrangements (Font of letters as directed by Engr-in Charge) complete all as specified and directed.

Dismantling Wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed by Engineer-in-Charge.

M &L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including necessary jointing and taping, and applying 1mm thick putty to receive finishes complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 12 mm thick Particle board for insulation purposes as in false ceiling, fixed with nails to timber framework design and pattern of board as approved by Engr-in-Charge.

M & L for second class hardwood fillets bull nosed, splayed, chamfered or rounded on one edge or face of exc 13 Sqcm but not exc 25 Sqcm in repairs, secured with nails or screws in repairs , complete all as specified and directed by Engineer-in-Charge.

M & L for second class hardwood plain fillets, square or rectangular or triangular in section clean sawn exc 6 Sqcm but not exc 13 Sqcm in repairs, secured with nails or screws in repairs , complete all as specified and directed by Engineer-in-Charge.

M&L for 6 mm thick Non asbestos fiber cement building fixed or laid / inserted to timber / GI / Aluminium framework with screws to ceiling flat or sloping, fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F in repair decorative designed false ceiling board of size 600 x 600 mm x 6mm thick with GI snap grid of 600 x 600 fixed over suspended false ceiling frames providing complete fitting / fixtures with GI ceiling angle / Tee 25 x 15 x 0.5mm thick or suitable channel with GI cleats if required fixed with screws mechanically either with screw driver or drilling machine with suitable attachment complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new or previously untreated plaster/ AC sheet/Gypsum board surfaces of ceiling including cornices and applying two coats of oil bound distemper colour/tint complete all as specified and directed by Engineer-in-Charge.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc incl removal of rubbish out of defence land complete all as specified and as directed by Engineer-in-Charge.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1: 6, using old size bricks complete all as specified and as directed by Engineer-in-Charge.

All as per item No 40 above here-in-before but except bricks.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster/cast in situ terrazo of any description on brick walls or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by the Engineer-In-Charge. (The rate quoted by the contractor shall included for welded mesh, scaffolding and necessary formwork up to triple storey bldg).

M & L for rendering 15 mm thick in CM 1:6 on brick wall surface, finished fair & even complete all as specified and directed.

M&l for rendering 15 mm thick on fair faces of brick wall mixing with water proofing compound as per manufacturer instruction (Water proofing compound paid for separately)of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement

Supply only integral water proofing compound

M & L for rendering 10 mm thick on brick or concrete surface of ceiling finished fair & even in CM 1:3 complete all as specified and directed.

M & L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M & L preparation of newly plastered surfaces of wall and applying two coats of OBD over a coat of putty filling including preparation of surfaces on walls as specified and directed .

M & L preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M&L Preparing of new surface of wall and applying two coats of cement based paint over one coat of primer.

Preparation of old plastered / unplastered surfaces of walls incl brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots and applying one coat of white wash on wall all as specified & directed by Engr-in-Charge.

Preparation of old plastered / unplastered surfaces of walls incl brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots and applying two coats of white wash on wall all as specified & directed by Engr-in-Charge.

Preparation of old plastered / unplastered surfaces of ceiling incl brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots and applying one coat of white wash on ceiling all as specified & directed by Engr-in-Charge.

Material and labour for complete removal of all existing treatment including preparation of old surface and applying two coat of Cement Base Paint over one coat of primer complete all specified and directed

M&L for Complete removal of existing treatment of wall including washing, rubbing down and stopping of old treatment and applying two coats of oil emulsion over a coat of white cement base wall care putty all as per manufacturer's instruction complete all as specified and as directed.

Material and labour for complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and applying two coats of anti fungal exterior emulsion paint over a coat of cement primer complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises.

M&L Coloured digital Glazed ceramic tiles in vertical surface 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including Rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as backing coat.

M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:4

M&L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:4

M&L for Double Charged Vitrified Ceramic tiles 10 mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:4.

All as per item No 62 above here-in-before but in Skirting including 10 mm thick backing coat cement mortar 1:3.

M&L for Double Charged Vitrified Ceramic tiles 10 mm thick (square / rectangular) polished, area of each tiles exc 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:4.

All as per item No 64 above here-in-before but in Skirting including 10 mm thick backing coat cement mortar 1:3.

Material and labour 1st quality homogeneous vitrified parking tiles in approved shade in minimum 10 mm thickness area of each tile exceeding 0.08 sqm but not exceeding 0.18 sqm in floors etc, set & jointed in neat cement slurry & pointed in matching coloured polymer cement based grout to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 complete all as specified and directed by Engineer-in-Charge. Make :Johnson Endura meteor (Korneto Biege) or equivalent of make mention in Appx A.

Demolition of reinforced cement concrete as in chimney, Roofs, floors (other than ground floors), beams staircases, landing, chajjas, shelves and similar suspended work complete.

M&L for RCC 1:1.5:3, type A-1 (using crushed stone aggregate) as in chajjas / cooking shelves / platform etc. and the like including 5mm thick rendering in cm 1:3 finished even and smooth without using extra cement to the exposed surface complete all as specified and as directed by Engineer-in-Charge (The rate quoted by the contractor shall included for form work.)

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including 20mm thick screed bed in CM (1:6) for laying of Granite slab & pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including half moulding of granite edges complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type BO (using 12.5mm graded stone aggregate) as in sub base floor complete all as specified and directed.

S&F in repair Steel plate rack made of stainless steel 1 mm thick over all size 600mm x 750mm complete all as specified and as directed by Engineer-in-charge

S & F 75mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410mm x 330mm x 160mm.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm

Taking up or down steel tubing & connections incl cleaning for refixing or removal from site 15mm bore pipe. Complete all as specified and directed.

Taking down 20 mm dia GI steel tubing and connection, including cleaning for refixing or removal, completed all as specified and directed.

Refixing of old steel tubing and connection in new or old position of 15mm bore complete all as specified and directed.

S&F GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors 15mm bore complete all as specified and directed.

Refixing old GI tubing and connections, 20 mm dia, in old or new position. (Walls, ceiling, floors, etc.) completed all as specified and directed.

M&L tubes 20 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

M&L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed by Engineer-in-Charge

S&F grating doom 100mm dia size with PTMT complete all as specified and directed.

Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed.

S & F in repairs 15 mm dia Brass CP Sink mixer for mixing hot & cold water screwed down for iron pipe and fixed

S & F in repairs 15mm dia Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water fixed, complete all as specified and directed by Engineer-in-Charge.

S & F in repair CP Jet Spray of Standard size for EWC along with CP connection pipe and all fittings as fixed Complete all as specified and directed by Engineer-in-Charge.

S & F in repairs CP Health faucet fixed with spring action and lever along with health faucet long pvc/cp chain 1.2 mtr for supply of water fitted in the existing water connection in the toilets, Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stop cock / angle cock fancy type with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.

S&F in repairs two way stop cock/angle cock fancy type with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.

S&F in repairs two way bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.

S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.

S & F in repair Glass Shelf fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 300gms)

S & F in repair Corner Glass Shelf fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 300gms)

S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.

S & F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including trap set complete all as specified and directed.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)

S&F in repairs PVC flushing cistern 10 ltr capacity valve less Syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm, waste coupling, chain and plug and porcelain stopper but including brackets, and waste pipe.

S & F in repairs, Toilet paper holder of brass CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engineer-in-Charge

S & F in repairs Stainless Steel Soap dish, fixed to plugs with chromium plated brass screws Complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC waste pipe flexible for WHB of 32mm size complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous China urinal half stall type, white , with grating and union for discharge pipe and including waste pipe(excluding flushing cistern), complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinals to plugs including 60 mm long brass screws including CP urinal spreader of any colour for fixing with 15 mm dia pipe (Minimum weight 60gms)

S&F 500 litres capacity Rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing from site including 20 mm Ball brass valves, high pressure, with polythene float and fly nut complete.

S&F 1000 litres capacity Rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing from site including 20 mm Ball brass valves, high pressure, with polythene float and fly nut complete.

S & F in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F in repair Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S & F Magnetic type catch fixed with screws to door frame complete all as specified and directed by Engineer-In-Charge.

S & F Piano type hinges of brass with 30 mm flap width complete all as specified and directed by Engineer-In-Charge.

S&F 20 mm Stainless steel curtain rod with stainless steel bracket and stainless steel finials, fancy type as approved by GE, as in curtain rods including taking down the old unserviceable curtains rods complete all as specified and directed by Engineer-In-Charge.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished

S & F in repair 100 mm size hasp and staple, stainless steel including bolt to hinge plate and fixed with screws in repairs complete all as specified and as directed by Engineer-in-Charge.

S & F in repair 18/19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in Kitchen drawers etc.

S & F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions

S & F Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2004 Section-8, clause 8B.3 to 8B.3.2 and shown on drawing in page No 150 of SSR part-II 2004.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plaincolour PVC© channel PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock and bottom rail on either side as gap insert for top rail and bottom rail. Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded. Sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

S & F second class hardwood 35 mm thick Plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S & F second class hardwood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F 1st class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary laboure, articles n exc 200 cucm each including 50 mm butt hinge.

Preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-In-Charge.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

All as per item No 126 above here-in-before but with out Glazing bars

S&F Steel windows or ventilators, fixed type, with glazing bars

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enameled paint over one coat of red oxide primer.

S & F in repairs 300 mm long mild steel ordinary rat tail rod pattern, door spring including roller and roller plate complete all as specified and as directed by Engineer-in-Charge.

S&F door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws complete all as specified and as directed by Engineer-in-Charge

S & F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142 gms) complete all as specified and directed by Engineer-in-Charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge

S & F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts in lieu of screws, in roofs, walls etc. with grade of zinc coating 275

All as per item No 135 but except Sheets

S & F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M&L for Preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc steel and iron surfaces and applying two coat of synthetic enamel paint of any description over 10cm width or girth complete all as specified and directed by Engineer-in-Charge

Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde-E-250 quality A).

S&F Steel work in trusses fabricated with rectangular / Square hollow section, including special shaped, washers etc including cutting welding, bending in shape etc using tube of YST 310 grade confirming to IS-4923 complete all as specified & directed. Make:- TATA / Asian / Jindal

S & F in repair 1.5mm thick Polycarbonate sheet fixed with self tapping stainless steel screw and washer complete all as specified and directed by Engineer-in-Charge.

S & F Solar control film 25 micron reflective type slicked to glass panes as per instructions of manufacturers

Supply and fix in repair 12 mm thick clear toughened glass door (saint-gobbain or modi guard, acid work or sand blasting work on it, as per our design), with making holes / cut-outs as required, making edges clear smooth polished, fixed with stainless steel cladded aluminium profile glass door rails with necessary door assembly (pre installed hardware, removable clip on covers, end cap, and rubber gasket or proper grip) and fixed on Double action floor spring with closing force EN3, having high grade cast iron mechanism body, housed within a corrosion resistant zinc paint protected galvanised steel loose box, internal mechanism components utilizing heat treated high alloy steel & ball bearing for optimum efficiency, closer mechanism totally immersed in hydraulic fluid, "hold open" models, having the possibility of the shutter being held open at 90 degrees angle, adjustable closing speed valve,

with pivot to suit patch fittings and door shutters, having tempered full glass panel of up to 80 kg weight, and Door handle: 475 mm long X 32 mm diameter. "S" type, back to back installation, glass damage preventing gasket, grub screws finish complete in all respect Complete all as specified and directed by Engineer-In-Charge.

M & L for etching on toughened glass designed and pattern as approved by Engr-in-Charge

S & F stainless steel handle 450mm size & 25mm dia suitable for toughened glass door complete all as specified and directed by Engineer-in-Charge.

S& F 2 levers stainless steel floor lock suitable for toughened glass door complete all as specified and directed by Engineer-in-Charge.

S & F in repair Powder coated superior quality venetian blinds horizontal or vertical type complete all as specified and directed by Engineer-in-Charge.

S & F second class hardwood 30 mm thick Glazed and skeleton windows, ventilators etc. are provided with stiles and rails , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of window shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats

M &L for Preparation of Old decorated Plastered or unplastered surfaces of wall including cleaning brooming down or with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts cleaning oil and greasy spots, trading oil, greasy spots etc and applying one coat of oil bound distemper on walls by filling putty or white cement to holes, cracks and uneven surfaces etc complete all as specified and as directed.

All as per item No 151 above but two coat of Oil Bound distemper on walls complete all as specified and as directed.

Supply and fixing for pressed steel frame for doors with one or more rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed.

Material and labour for cement concrete 1:3:6 type C1 (using 12.5 mm graded stone aggregate) as in back filling of pressed steel frame etc complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed

Supply and fix 30mm thick prelaminated factory made solid HDF Molded Door with wood free EPS , 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick Molded masonite sheet on the one face and 5mm plain colour masonit sheet on back face, supplying and fining in frame at site as per specification and drawing

Supply and fixing for factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels.

Material and labour for Box type steel window double frame (glazed & gauged) made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame comprise glazed Skelton shutter door frame of ERW tube P-section size 50 mm x 20 mm with two Nos openable leaf consisting of two Nos of sash bar of T-sec 20 mm x 3 mm welded to frame with one No vertical mullion of ERW of ERW box type T-section size of 60 mm x25 mm FI 2 mm thick welded / screwed to frame for fixing of wire gauge/glass including fixture and fitting like as handle, tower bolt stopper , cleat, pintail hinges, holdfast primer etc, complete all as specified and directed. (Note- sheet glass, wire mess, security grill will be measured and paid separately and window will be measured one side only)

All as per Sl item No 158 here-in-before but single shutter(glazed) with single frame. Complete all as specified and directed

Supply and fixing in repair 2 mm thick Fiber glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

Supply and fix in repair Welded steel wire fabric( weight not less than 4kg per sqm) fixed and including MS angle iron frame including taking out old wooden frame complete all as specified and as directed.

Supply and fixing in repair 1.25mm thick of laths of Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type. complete all as specified and directed

Taking down the existing rolling shutters from the existing opening and refixing the same in position after carrying out necessary repairs including oiling, greasing, easing out etc size of shutter exc 7.00 Sqm & n exc 12.00 Sqm each. all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs 100 mm dia stain less steel grating with waste hole.

Supply and fixing in repairs 100mm dia stainless steel grating

Supply and fixing in repair pillar taps cast copper alloy with capstan head chromium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repair complete all as specified and directed (dia of bore 15mm) fixed in repair.

Supply and fix in repair of towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

Supply and fix in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed.

Supply and fixing in repair PVC (SWR) bend 110 mm dia without access door complete all as specified and as directed.

Supply and fixing in repair PVC (SWR) pipes 75 mm dia. single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level)

Material and labour for 100mm thick Cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as flooring and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L Hard core of Broken stone Boulders of gauge n.exc 63mm deposited spread & leveled in layers n exc 15cm watered and rammed to a true surface thickness all as directed

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Supply and fixing for Pre-painted galvaume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge / flashing board/valley gutters of width and girth not less than 610mm.

S&F Pre- painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as specified

Taking down existing wall paneling including wooden fillets and similar works etc and Supply and fixing 9-10mm thick hollow pre-laminated PVC Wall Paneling with tougue and groove joint fixing with necessary 'U' Channel , fittings for fixing in wall as per manufactures instructions complete all as specified and directed

Material and fixing in repair for 8 mm thick HDF laminated wooden flooring any colour laid over and including 2mm thick EPE foam sheet complete all as per manufacture instruction and 150 micron polyothene should be placed below foam to as a water barries complete all as specified and direction including cleaning of existing surface of floor Make - Green floormax of green ply/ action tesa or equivalent make

Taking out old wooden boarding as in from kitchen cup boards and M&L kitchen shutters and partition of Factory made Solid PVC embossed shutter 18 mm thick (stiles), with 2 mm thick Molded PVC prelam colored sheet on the front of face and fixing in frame at site as per specifications with all around FRM sheet , PVC particles board 18 mm thick as directed by Engr- in -charge. incl all iron mongry such as appropriate no of knobs, handles 75 mm long, ball catchers, piano type hinges etc Note- Measurements will be taken as flat.

Dismantling the existing ceiling board of any description fixed in any position with nails and Supply and fixing in position suspended false ceiling system using E Grid suspended ceiling Grid system. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked IS No 14862-2000. Fiber cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the roof with butter fly clips complete all as specified and directed. Make:- M/S Everest industries Ltd or India Gypsum or equivalent make approved by GE

M&L for providing cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.

Demolition of interlocking paver block of any description or thickness in path / hardstanding etc laid, bedded and pointed dry, all as specified.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation. Complete all as specified and direction by Engr-in-Charge

Material and labour for 75 mm thick cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate)as in sub base complete all as specified and directed

M&L for glossy finished rubber molded machine pressed rubber molded chequered tiles of any pattern / design of size 300mm x 300mm x 25mm thick laid over cement screed bed of 15mm thick in cement mortar 1:6 in floors paths etc, complete all as specified and directed by Engineer-in-charge.

M/S A.R.TANTARY

SB ENTERPRISES

M/S TARIQ AHMAD SHEIKH

M/S Thakur & Sons

M/S LUCKY BUILDERS

HAJI ZAHOOR HUSSAIN GANIE