SPECIAL REPAIRS TO OFFICER MESS AT MH SHILLONG (DSM 20) AND PROVN OF 01 X TOILETS BLOCK FOR OPD PATIENTS AT UPPER BLOCK AT MH SHILLONG AND PROVN OF OVERHEAD PARKING SHED FOR 07 X LIGHT / HEAVY VEHICLES OF HQ RTG ZONE SHILLONG AND PROVN OF OVERHEAD S

Amount

AGE B/R SCHEDULE PART - I Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in soft/loose soil, all as specified .

Excavating over areas, n. exc 1.5 m deep and getting out soft/disintegrated rock complete all as specified and as directed.

M & L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete complete all as specified and as directed.

M&L RCC 1:1.5:3 (Nominal mix) using (20mm graded aggregates ) as in fondation, footing, Plinth beam complete all as specified and as directed.

M&L RCC 1:1.5:3 (Nominal mix) using (20mm graded aggregates ) as in columns, pillars etc complete all as specified and as directed.

M&L RCC 1:1.5:3 (Nominal mix) using (20mm graded aggregates ) as in beam, lintel band over 1.50m span complete all as specified and as directed.

Formwork to sides of concrete foundations,footings, bases of columns, plinth beams and similar work with rough finish surfaces of concrete flatcomplete all as specified and as directed.

Formwork to sides of pillars, posts,struts,piers,columns and stanchions complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beam , lintels , cantilevers , shelves including supports , overhangs etc. also splays between floors and beams etc complete all as specified and as directed.

M&L for TMT bar 10mm dia and over cut to length ,bent to shape required including cranking , bending spirally for hooping column hooking ends and binding with mild steel wire (annealed ) not less than 0.9mm dia complete all as specified and as directed.

All as per item No 11 above but 5mm dia and over upto and including 10mm dia in stirrups ,spacers and binders complete all as specified and as directed.

Returning, filling incl spreading levelling watering and well ramming in layers n exc 25 cm thick each layer complete all as specified and as directed.

Removing of excavated soil to a distance exc 250m but n exc 500m and deposited where directed n exc 1.5 m above the starting point complete all as specified and as directed.

M&L for Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in openings as per specification complete all as specified and as directed.

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated (powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified

S&F powder coated(powder coating min 50 micron) anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 200mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specified and as directed.

S&F aluminium anodised barrel bolts and fixed of 200 mm length complete all as specified and as directed.

S&F Extruded Aluminium, anodised, bow handles of size 150mm complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

S&F , Vitreous china squatting pan, 'Orrisa Pattern" size 580x440mm white, with integral foot rests (excluding flushing cistern & flush pipe) complete all as specified and as directed.

S&F PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified.

S&F vitreous China clay WHB flat back size 550x400 mm incl pedastal , PVC waste pipe 32 mm dia, waste coupling brackets etc complete all as specified and as directed.

S&F Vitreous china wash down water closet pan padestal pattern white, excluding fixing bolts, flushing cistern but including flush pipe, seat and cover complete, fixed in repairs all as specified and as directed.

S & F Brass CP tubular towel rail 20 mm dia , 60 cm long including brackets complete all as specified and as directed.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed allas specified and directed

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railling 60 cm long screw and cup washer complete all as specified and as directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and as directed.

S&F PVC (SWR) 75mm bore bends any radius with access door complete all as specified and as directed.

S&F PVC (SWR) 110mm bore bends any radius with access door complete all as specified and as directed.

S&F PVC (SWR) 75mm bore bends any radius with access door complete all as specified and as directed.

S&F PVC (SWR) 75mm bore vent cowl complete all as specified and as directed.

M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fixing rotational moulded HDPE water storage tank ,triple layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed all as specified and directed.

M&L for Cutting chases,pining in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills, sunshades ,shelves,lintels,etc.; and cutting chases for concealed water tubing or concealed conduit,wiring,etc,and making good cutting not exceeding 10 cm girth in brick walls. complete all as spd

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified

S&F Concealed stop cock, Chromium plated, 15 mm, all as specified and directed

S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F 15mm bore Bib taps, cast copper alloy fancy type , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Grating doom 100 mm dia of PTMT.(Minimum weight 25 gms) complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C2, 75mm thick as in plinth protection finished even and smooth with out using extra cement complete all as specified and as directed.

M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains all as specified & directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends

S&F G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified

S&F G.I. pipe 20 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified

M&L for Rendering 15mm thick on fair faces of concrete surface of wall in CM (1:4) in two layer mixing with WPC top 5mm thick @ 3% by weight of cement over a backing coat of 10mm finished even and smooth without using extra cement all as specified and directed. Note : WPC shall be measured and paid separtely as suplly only.

M&L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral water proofing compound

M & L for preparation of new walls surface and two coats of white wash over one coat of primer complete all as specified and directed.

M&L for for applying two or more coats (over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface on new or previously untreated surfaces all as specified and directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F Mild steel joist channel or angle or tee section,ms tube and fixed with ms flat iron cut into shape drilled and fixed with screw conforming fe 410 complete all as specified and as directed.

Excavation in post holes not exc. 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete in soft/loose soil complete all as specified and as directed.

M&L for PCC ( 1:2:4) type B-2 using 40mm graded stone aggregate as foundation etc. complete all as specified .

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including distance pieces, cleats, plates, welding/rivets/bolts etc complete all as specified.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for preparation of steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primer all as specified.

Surface Excavation n exc 30cm deep and average 15 cm deep getting out in soft/loose soil complete all as specified.

Surface dressing n exc 15 cm deep hard/dense soil complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks exc 10 cm in width with PCC (1:3:6), type C-1, (using 20mm graded stone aggregate) and setting in CM(1:6) complete all as specified and directed.

M&L for precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

S & F prepolished coloured rubber mould paver block any shape and size conforming to IS 15658-2006 of 100mm thickness (M-50 grade) as in plinth & hard standing set in CM (1:6) includung filling joint with white/coloured cement to match complete all as specified & directed.

M&L for sand cushning under floor or in foundations including watering and consolidation etc complete all as specified and as directed.

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and as directed.

Taking down shutters of any description nexc 1.0 Sqm refixing in same opening complete all as specified and as directed.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete all as specified and as directed.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and as directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar

Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified and as directed.

Dismantling of plain/corrugated steel sheeting any gauge, thickness in roof covering complete all as specified and directed.

M&L for preparation of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified

S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and as directed.

M &L for 35mm thick second class hard wood glazed skeleton shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

S&F for 2nd class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 18/19 mm thick pvc boards fixed with screws to timber frame complete all as specified and as directed

S&F 0.90 mm thick pvc decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified

S&F brass 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F brass 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F extruded fancy type Brass handles fabricated type of size 100 mm complete all as specified and as directed.

M&L for vitrified tiles lightshade (square /rectangular) polished area of each tiles exc 0.42 sqm but not exc 1.00 Sqm in floors laid over and incl. 20mm thk 1:6 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed.

All as Per Item no 94 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:4

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete all as specified and as directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws as in ceiling complete, complete all as specified and directed.

S&F aluminium snap grid frame work for false ceiling incl 6mm dia GI hanger (upto 1200mm length) adjusting level fixed to roof slab/truss/purlins/rafters @ 12.m C/C complete all as specified and as directed

M&L for 2nd class hard wood Plain fillets square , rectangular or triangular in section , clean swan secured with nails sectional area exc 13 sqcm nexc 25 sqcm incl dismantling complete all as specified and as directed.

S&F 5 mm thick PVC sheet fillet of 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

S&F solid PVC wall panelling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifiecations and drawing complete all as specified and as directed.

M&L for vitrified ceramic tiles dark shed, 10 mm thick(square /rectangular), polished, area of each tile n exc 0.36 sqm in floor etc , laid over 15 mm thick screed bed 1:6 ,set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified.

S&F 15 mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly -nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair Vitreous china WHB size 550x400mm including cutting or pinning in ends of brackets or erecting incl 32mm dia waste pipe complete all as specified.

S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware

S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag

S&F in repairs Brass CP 2-in-1 Bibcock with flange of make Jaguar Cat Part No:-ORP-10041PM OR equivalent in Marc/Cera/Parryware

S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag

S&F in repairs Soap dish holder of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag

S&F in repairs Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag

S&F in repairs Towel ring square shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag

S&F in repairs corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag

S&F in repairs CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1619 with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Prayag/Hindaware/parryware

S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware

S&F in repair CP Hand shower 24x24 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Cera

S&F in repairs Brass CP angular stop cock fancy type with Capstan heads of make Jaguar/Marc/Parryware

S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap and fixed complete all as specified and as directed.

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

M & L for preparation of new walls surface and applying two coats of distemper oil emulsion over a coat of 1 mm thick wall care putty and one coat of wall primer and complete all as specified and directed.

M&L for Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed.

M&L for for applying two or more coats (over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surface surfaces and complete removal of existing treatment all as specified and directed.

M&L for Painting two coats of Synthetic enamel paint over a coat of primer on new wooden surfaces of any description, over 10 cm width or girth including preparation of surfaces all as specified and directed

M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and treated with one coats of synthetic enamel paint complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old steel surface exc 10 cm width or girth incl preparation of surfaces complete all as specified and as directed.

S&F Continous (Piano hinges), mild steel, bright finished of electrogalvanised width of flap when open,30mm complete all as specified and as directed.

S&F ball catches with 8 mm dia steel ball,& brass body & striking plate including letting in & fixed complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever barackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

M&L 12mm thick toughened sheet glass incl bevelled /rounded incl grinding/cutting complete with all fittings/washers/handles and bolts complete all as specified and directed

S&F for Venetian blinds of wooden finished material width of 50mm and thickness of 5 mm and size as per direction of Engr-in-Charge

S&F Stainless steel kitchen plate rack of size 31" X 30' X 10" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable one etc complete all as specified and as directed. (Make : Blue star, Cat No - BSKPR-314) or equivalent make of Prayag.

S&F 15 mm bore CP sink mixer with regular spout (W/M) complete all as specified and directed (Make - Prayag, Cat No - 8455) or equivalent make of hindware / cera

M&L for 12 thick seamless calcium silicate ceiling made out of 1800x1200 size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillings head with under head cutter at 200 mm centre to centre incl finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish fibre tape to provide incl two coat of putty and two coat of OBD design incl GI frame for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.90 mm thick having two equal flanges 15 mm each and web of 45 mm suspended from soffit at approx 900 mm c/c with GI cleat and steel expansion fasternerswith and incl ceiling section (nexc 1.20 m lenght) 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.50 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm c/c complete all as specified and as directed.

M&L for Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces, including necessary formwork, fixing and set in CM 1:4 complete all as specified and as directed.

AGE E/M SCHEDULE PART - II Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note (All chases will be cut by chase cutter only) AMke of Cable - KEI/ Havells / Kalinga

Description all as per serial item No 141 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor, Vinay

Supply and fixing modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor .

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay

Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular bell push 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all spcifided and directed.

S & F Wall bracket decorative LED fitting warm white /white type with lamp 12 Watt complete with necessary connection complete all as specified and as directed.

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and as directed. Make Bajaj/Havell's/CG.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed

Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specified and as directed.

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion complete all as directed. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including PVC Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion complete all as directed.Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC cassing / capping shall be measured as one RM.

Supply and fix MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCCB TPN, 240 Volts, 100 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specified and as directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per Srl item No.161 above but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 161 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Description all as per Srl item No.161 above but for one bell point controled by one bell push .

Description all as per Srl item No.161 above but for socket outlet point 5 Amp on same board.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size complete all as specified and as directed.

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and as directed. Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

M & L Sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC cassing / capping shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

Supply and fixing LED security Building light LED 35 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and as directed. Make:- Bajaj Cat part No- 169821 LED/CG as per cat No LSTO 25 CDL equivalent model as in Surya / havells .

Supply,laying, and testing XLPE cable insulated,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with starnded aluminium conductor of size16 sqmm 2 core complete all as specfied and directed.

Excavation in trenches n exc 1.5 mtr wide and depth n exc 1.5 mtr deep for foundation, laying GI pipes and UG cables etc n exc 10 sqmtr on plan, in hard/dense soil and getting out complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M & L for providing dry river sand as in sand cushioning to UG cable including punning gently complete all as specified and directed.

Removing excavated material not exc 50 mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M & L Sub class'B' old size well burnt brick laid flat in trenches as protection to LT cable complete all as specified and as directed.

Supply and fixing GI Tubing light grade under road, on pole floor and on wall for cable protection complete all as directed for following sizes 40 MM dia bore complete all as specified and as directed.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and as directed.

S & F Slim desingn LED recessed square PLUTO NEO 2X 2, 28 watt flat panel PDC aluminium housing and PMMA diffuser including taking down old unserviceable one all as directed and specified make- Philips full glow high efficiency

S & F wall mounted LED batten fittings with all accessories 1X 9 Watt LED / foot light 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings

S & F Wall bracket decorative LED with lamp 12 Watt complete with necessary connection including taking down old unserviceable one complete all as specified and as directed.

S & F LED down lighter with lamp 12 Watt complete with necessary connection including taking down old unserviceable one complete all as specified and as directed.

S & F Exhaust fan 230 volts , 300mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall including taking down old one complete all as specified and as directed.Make Bajaj/Havell's/CG.

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and as directed. Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down old one complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one. Make: Havells or equivalent in Schnieder/GE/C&S.

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.Make : Hager as per cat part- NCN106N, Schneider as per cat No : A9N4P32C or Indoasian as per cat No : 81195.

M & L Sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

R K CONSTRUCTION