EEE-III/RZ/NZ/TC/2021-22/14.16

Amount

Earthing with GI earth pipe 4.5Mx40mm dia i/c accessories and providing masnary enclosure with cover plate having locking arrangement and watering pipe etc(but without charcoal or coke and salt ) complete as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recessfor loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplersetc. conforming to IS 14930, Part II complete with fitting andcutting, jointing etc..direct in ground (75 cm below ground level)including excavation and refilling the trench but excluding sandcushioning and protective covering etc., complete as required.(a) 63 mm dia (OD-63 mm & ID-51 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Supplying and erection of galvanized D-iron complete with shackle insulator (75 x 90 mm ) GI bolt and nut coach screws etc as required.

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. A) (a) 100Amp,16KA,TPMCCB

SITC of 60W LED Street Light luminiare fitted with lens, made of pressure die cast aluminium housing & toughened glass cover complete with the following specification as reqd. (b) Total system wattage = 60 watt ± 5% (d) Luminaire Efficacy ≥ 100 Lm/w (e) Power Factor ≥ 0.95 (f) Protection Class- IP-66

Supply of XLPE insulated and PVC Sheathed Al conductor armoured cables conforming to IS 7098 (Part-I) as required. A) 2x25sqmm

b) 4x25sqmm

SITC of pillar box size 900 mm x450mmx250mm suitable for mounting incomer of 250 MCCB/main switch 4 pole and energy meter 3 phase complete with eleethoypic grade Aluminium bus bar of sixe 25mm x10 mm mounted on galvanized M.S body power quoted piferage proof SMC door duly welded with S.S. with rain com size 40mm x 40mm x5mm x 600 mm geight in cutting 300 mm height below grand and covered with shode proof SMC sheet of 3 mm as required.

Supply of XLPE insulated and PVC Sheathed Al conductor Un -armoured cables 1.1 KV grade conforming to IS 7098 (Part-I) of following size:- 2 core 16 sqmm

Supply and fabrication of pole protection system made up of 8SWG steel wire mesh of size25mmx75mm rectangular with 50mmx50mmx6mm MS angle iron for supporting the mesh and grounding the protection system in suitable quality of CC etc as reqd.

Kamal Electricals

M/s Gyan Enterprises