Supply, installation and commissioning of Outdoor Public Exercise Equipment

Sky Walker/Double Cross Walker: - Size 1800 mm x 400 mm x 1200 mm. Providing and fixing Sky Walker/Double Cross Walker made from 'B' Class GI Pipe of 2.5 mm wall thickness. The main frame pipe is 80 mm made from 'B' Class Gl Pipe of 2.5 mm wall thickness. The footrests is made from FRP/C.I./Aluminum casting material, its sizes are 130 mm X 300 mm & 5 mm thickness. M.S. plate of 280 mm x 130 mm x 5 mm thickness is used For connecting the handle frame to main pipe 60 mm 'B' Class GI Pipe is used. The bottom support of M.S. round plate of 250 mm x 10 mm thickness is welded at bottom. The leg movement frame is of 50 mm x 50 mm x 2 mm thick CRC square pipe. The handle frame is of 40 mm made from 'B' Class GI Pipe. The equipment is fixed on ground with cement concrete and J shaped welded bolts of 18 mm thickness and Closing Caps made from top quality FRP material with 2 mm thickness & Plastic cap are used. The pins used are made up of 25 mm bright bar. The bearings used are 6203zz permanent lubricated sealed bearing of reputed make (SKF/FAG). High tensile steel with galvanized nut bolts are used for assembly. The serclips used for assembly are of 25 mm. The powder coat is done by Poly rethane & Epoxy powder with 60 to 70 micron thickness. All equipment shall be 3rd party quality certified by International Testing Laboratory Govt. of India approved MSME. Outdoor Gym Equipment must confirm DIN 79000 and EN 16630, CE Certified, 1.5.0. 9001:2015 Quality Management System, 1.5.0. 14001:2014 Environment Management Systems for quality/design standard.

Walking Jogger:- Size 1500 mm x 500 mm x 1500 mm. Providing 1 and fixing of Walking Jogger is made from 'B' Class GI Pipe of 2.5 mm wall thickness. Stand and walking at a place gives different feeling than normal walking it increases the efficiency of normal walking and develops the stamina for walking and jogging. Structure Side pipes 100 mm x 50 mm M.S 'B' class (2.5mm thickness). Checked plate in front & back. Handle 30mm, 'B' class (2.5mm thickness). Walking pipe 30mmG.I, 'B' class (2.5mm thickness). Permanent lubricated sealed bearing of reputed brand. Nuts & Bolts Galvanised. Nylon covers for covering the Nuts & Bolt. The equipment is fixed on ground with cement concrete and painting is done by attractive color spraying after proper surface treatment. All equipment shall be 3d party quality certified by International Testing Laboratory Govt. of India approved MSME. Outdoor Gym Equipment must confirm DIN 79000 and EN 16630, CE Certified, 1.5.0. 9001:2015 Quality Management System, 1.5.0. 14001:2014 Environment Management Systems for quality/design standard.

Chest Press Double:- Size 1900 mm x 740 mm x 1920 mm. Providing and fixing Chest Press Double made from "B' Class Gl Pipe of 2.5 mm wall thickness. The center pipe is of 100 mm NB made from "B" Class GI Pipe of 2.5 mm wall thickness, and the bottom support of M.S. round plate of 68200-250 mm dia & 10 mm thickness is welded at bottom. The remaining frame is made up of 40 mm NB 'B' Class GI Pipe of 2.5 mm wall thickness. The handle frame is made up of 25 mm NB 'B' Class GI Pipe of 2.5 mm wall thickness. The seat frame is made up of 40 mm NB & 50 mm NB 'B' Class Gl Pipe of 2.5 mm wall thickness. For the assembly different bushes are used which is made from 50 mm with 3 mm thickness seamless pipe & 50 mm solid bar is used. The seats is fitted on the outer frame is made up of high quality FRP material of size 330 mm X 330 mm of thickness 3 mm & M.S. Plate of thickness 5 mm and Size 250 mm X 200 mm is used to Support it. Closing Caps are made from top quality FRP material which is of 2mm thickness. The pins used are made up of 25 mm & 17 mm dia solid bar. The bearings used are of '6205' & '6203' permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from S.S. material. The sercilps used for assembly is made up of 25 mm & 17 mm dia. The equipment is fixed on ground with cement concrete and J shaped welded bolts of 18 mm thickness and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated. All equipment shall be 3rd party quality. certified by International Testing Laboratory Govt. of India approved MSME. Outdoor Gym Equipment must confirm DIN 79000 and EN 16630, CE Certified, I.S.O. 9001:2015 Quality Management System, I.S.O. 14001:2014 Environment Management Systems for quality/design standard.

Pull Chair Single:- Size 1200 mm x 710 mm x 2150 mm. Providing and fixing of Pull Chair/Pull Chair Single with prime stand pipe shall be minimum of 100 mm NB dia of thickness not less than 5.00 mm, Handle frame & Seat frame shall be minimum of 32 mm NB dia of thickness not less than 3.6 mm & Connecting links shall be minimum of 25 mm NB dia of thickness not less thah 3.60 mm are of 'B' Class GI Pipe of 2.5 mm wall thickness with hot dipped galvanised with minimum of 75 microns lonized coated and zinc dipped joint with robotic welded. The two handle frames are hinged over 100 NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance-free ball 330 x 330 x 2 mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion.. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100 mm NB dia supported with M.S. Angle 25 x 25 4 mm. The instruction plate of size 150 mm x 230 mm of SS 304 grade Plate with 0.7 mm thick shall be riveted on 5 mm thick plate with your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630. With one year unconditional warranty Including cost & conveyance of all materilas and all labour Charges for erection but excluding cost of foundation concrete.

Air Swinger-Size 2000 mm x 500 mm x 1500 mm. Providing and fixing of Air swinger made is from 'B' Class Gl Pipe of 2.5 mm wall thickness. Air Swinger is the best exerciser for among all other outdoor fitness equipment’s, Elliptical Trainer gives people an excellent way of easy workout. These equipment’s are designed for developing and strengthen the cardiac functions and whole body joints, at the end resulting in a perfect shaped figure. In this trainer, its sidle round shape and movement front view each other make its design unique and more effective. Bottom swinging pipe 50mm 'B' class (2.5 mm thickness). Side round and supporting gige 50 mm, 'B' class (2.5 mm thickness). Swinging handles 30 mm, ' class (2.5 mm thickness) Metallic checked foot plates 4 mm thickness. Permanent lubricated sealed bearing of reputed brand. Nuts & Bolts Galvanized. Nylon covers for covering the Nuts & Bolt The equipment is fixed on ground with soment concrete and painting is done by attractive color graying after graper surface treatment, Shot blasting and initial coat of yellow primar surface is applied before tog soat. All pipment shall be 3rd party quality certified by International Tasting Laboratory Slovt. of approved Equipment must confirm DIN 79000 and EN 16630, CE Certified, I.S.O. 9001:2015 Quality Management System, I.S.O. 14001:2014 Environment Management Systems for quality/design standard

Standing Walst Twister Triple:- Size 1700 mm x 560 mm x 1250 mm, Providing and fixing Standing Waist Twister Triple equipment made from 'B' Class GI Pipe of 2.5 mm wall thickness of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimetres. The Center Pipe Is of 100 mm NB made from 'B' Class GI Pipe of 2.5 mm wall thickness. The M.S. round plate of 250 mm & 10 mm thickness Is welded at bottom. The standing frame of the Triple twister is of 32 NB made from 'B' Class GI Pipe of 2.5 mm wall thickness. The handle frame of double twister is 25 NB. The Twister plate fitted on the standing frame is made up of M.S. Round Plate of size 300 mm diameter and 10 mm thickness. The equipment is fixed on ground with cement concrete and J shaped welded bolts of 18 mm thickness and Closing caps made from top quality Fiber reinforced Plastic material which is of 2 mm thick. The Pins used are made up of 25 mm MS bright material. The bearings used are of 6205zz permanent lubricated sealed bearing of reputed brand (FAG/SKF). High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating done with Pure Polyester powder with 60 to 70 micron thickness. All equipment shall be 3rd party quality certified by International Testing Laboratory Govt. of India approved MSME. Outdoor Gym Equipment must confirm DIN 79000 and EN 16630, CE Certified, 1.5.0. 9001:2015 Quality Management System, I.S.O. 14001:2014 Environment Management Systems for quality/design standard.

Cycling Instruments/Arm and Paddle Bike:- Size 1100 mm x 500 1 mm x 900 mm. Providing and fixing Cycling Instruments/Arm and Paddle Bike made from 'B' Class GI Pipe of 2.5 mm wall thickness. The center pipe is of 40 mm NB made from 'B' Class GI Pipe of 2.5 mm wall thickness. The handles are made up of casted iron material with plastic holding grips. For foundation holes pass provision is provided. The footrests is made from Aluminum casting material, its sizes are 130 mm x 300 mm & 3 mm thickness. The equipment is fixed on ground with cement concrete and J shaped welded bolts of 18 mm thickness. The seats and bank rests are fitted on the outer frames are made up of M.S. sheet of size 280 x 130 x 5 mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. The pins used is made up of 25 mm diameter harden low carbon steel. The bearing used is of "6205" permanent lubricated sealed bearing. The nut bolts used for assembly are made from S.S. material. The gym equipment shall be finished smooth with a primer coating of at least 40 micron followed by epoxy based powder coating with polyester powder coating of at least 60 to 70 micron thickness using Exonoble/Berger make paints or its equivalent paints. The holding down/fixing of Gym equipment’s shall be embedded in cement concrete in the ratio of 1:2:4 (1cement: 2 coarse sand: 4 stone agg. 20 mm nominal size.). All equipment shall be 3rd party quality certified by International Testing Laboratory Govt. of India approved MSME. Outdoor Gym Equipment must confirm DIN 79000 and EN 16630, CE Certified, I.S.O. 9001:2015 Quality Management System, 1.5.0. 14001:2014 Environment Management Systems for quality/design standard.

Aerial Stroller Double/Air Walker:- Size 2000 mm x 500 mm x 1200 mm. Providing and fixing of Double Health Walker/Aerial Stroller Double/Air Walker/Fun Walker Double with three prime stand pipes shall be minimum of 100 mm NB dia of thickness not less than 5.00 mm, Pedestal frame shall be minimum of 32 mm NB dia of thickness not lessthan 3.6 mm & Handle frame shall be minimum of 25 mm NB dia of thickness not less than 3.60 mm are of 'B' Class GI Pipe of 2.5 mm wall thickness with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The two pedestal frames are hinged over 100 NB prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade, All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion.. The foundation pipe with anchoring shall be 750 mm deep with minimum of 100 mm NB dia supported with M.S. Angle 25 x 25 x 4 mm. The instruction plate of size 150 mm x 230 mm of SS Air Swinger:- Size 2000 mm x 500 mm x 1500 mm. Providing and fixing of Air swinger made is from 'B' Class GI Pipe of 2.5 mm wall thickness. Air Swinger is the best exerciser for among all other outdor fitness equipments, Elliptical Trainer gives people an excellent way of easy workout. These equipments are designed for developing and strengthing the cardiac functions and whole body joints, at the end resulting in a perfect shaped figure. In this trainer, Its side round shape and movement front view each other make Its design unique and more effectiv. Bottom swinging pipe 50mm 'B' class (2.5 mm thickness). Side round and supporting pipe 50 mm, 'B' class (2.5 mm thickness). Swinging handles 30 mm, 'B' class (2.5 mm thickness). Metallic checked foot plates 4 mm thickness. Permanent lubricated sealed bearing of reputed brand. Nuts & Bolts Galvanised. Nylon covers for covering the Nuts & Bolt. The equipment is fixed on ground with cement concrete and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. All equipment shall be 3rd party quality certified by International Testing Laboratory Govt. of India approved MSME. Outdoor Gym Equipment must confirm DIN 79000 and EN 16630, CE Certified, 1.5.0. 9001:2015 Quality Management System, I.S.O. 14001:2014 Environment Management Systems for quality/design standard.

Seated Puller/Pull Chalr:- Size 1900 mm x 740 mm x 1920 mm. Providing and fixing Seated Puller/Pull Chair made from 'B' Class Gl Pipe of 2.5 mm wall thickness. The center pipe is of 100mm NB made from 'B' Class GI Pipe of 2.5 mm wall thickness and the bottom support of M.S. round plate of 250 mm dia & 10 mm thickness is welded at bottom. The remaining frame is made up of 30 mm NB 'B' Class GI Pipe of 2.5 mm wall thickness. The handle frame is of 25 mm NB 'B' Class GI Pipe of 2.5 mm wall thickness. The seat frame is of 30mm NB 'B' Class GI Pipe of 2.5 mm wall thickness, for the assembly different bushes are used which is made from seamless pipe of 50 mm and 3 mm thickness & 50 mm solid bar is used. The seats are made up of high quality FRP material of size 330 mm X 330 mm of thickness 3 mm & M.S. Plate of size 250 mm X 200 mm X 5 mm is used to support it. Closing caps made from high quality FRP material which is of 2 mm thickness. The pins used are made up of 17 mm diameter solid bar. The bearings used are of '6203' permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from S.S. material. The serclips used for assembly are of 17 mm diameter. The equipment is fixed on ground with cement concrete and J shaped welded bolts of 18 mm thickness and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated. All equipment shall be 3rd party quality certified by International Testing Laboratory Govt. of India approved MSME. Outdoor Gym Equipment must confirm DIN 79000 and EN 16630, CE Certified, 1.5.0. 9001:2015 Quality Management System, 1.5.0. 14001:2014 Environment Management Systems for quality/design standard.