Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC | ₹37.4 L Quoted ₹37.8 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹40.3 LRejected-Finance 112 AMBALA ROAD NARAINGARH AMBALA 134203 | NARAINGARH | AMBALA | HARYANA | 134203 | ₹40.3 L | L2 | Rejected-Finance Being other than L1 |
| Sl No | Description | Qty | Unit | shakti construction L1 | J S CONSTRUCTION CO L2 |
|---|---|---|---|---|---|
| 1.00 | Taking down any type of existing roof treatment including bedding layer of concrete/mud any thickness in cement mortar and including removing material outside from MOD land complete all as specified and directed | 150 | Sqm | 10 ₹1,500 | 55 ₹8,250 |
| 2.00 | M & L for cement concrete 1 : 2 : 4 type B-0 (using 12.5 mm graded stone aggregate) laid as in padding 50mm thick average over roof slabs for providing proper slope including finishing surface even and smooth without unsing extra cement with 150 ml bag cement water proofing compound by weight of cement complete all as specified and directed . Note : WPC will be measured and paid separately. | 7.5 | Cum | 5,500 ₹41,250 | 4,200 ₹31,500 |
| 3.00 | Cleaning and preparation of the surface to receive Fosroc Proofex ORG or its equivalent in approved make water proofing system shall be a sound base, any crack shall be treated with cementious repair mortar of Fosroc Renderoc CS or epoxy crack filling mortar by proper grooving arrangement complete all as specified and directed | 150 | Sqm | 200 ₹30,000 | 300 ₹45,000 |
| 4.00 | Supply and fixing TPO membrane of nonflammable waterproofing of roof which shall be a 1.5mm thick loose laid TPO membrane layers overlapped to achieve a minimum weld of 110mm, Hot air welding can be either handapplied or by means of automatic machines and the rolls either end are overlapped with layers of non-woven geotextilefiber, the separation layer provided to prevent the mechanical abrasion and cushioning between the Fosroc Proofex ORG membrane or its equivalent in approved make and the concrete substructure, the termination of Fosroc Proofex ORG or its equivalent in approved make by aluminium strip anchoring.
Note: Work shall be executed by authorised applicator with prior experience of more than 5 years in applying similar system. | 150 | Sqm | 1,000 ₹1.5 L | 950 ₹1.4 L |
| 5.00 | Supply only Liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge. | 8 | Litre | 100 ₹800 | 99 ₹792 |
| 6.00 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm
including excavating channel along the wall and rodding etc. complete all as specified and as directed by the Engineer-in-Charge. | 100 | Sqm | 230 ₹23,000 | 110 ₹11,000 |
| 7.00 | M&L for dismantling loose concrete cover of RCC slab, ceiling , columns, beams,chajja, balconies, staircase and as direceted, roughening and cleaning concrete surfaces with steel wire brushes, removing of rust from existing steel surfaces with rust removers of SIKKA restoff 100 applied two coast @0.15kg/Sqm per coat of steel surface and cleaning all rust with steel wire brush and washed with water and allowed to dry incl S&F welded fabric GI wire mesh or wire , size not less than 75 x 75 mm and 3 mm dia as reinforcement to concrete. After placing the additional re-inforcement, all concrete surfaces shall be throughly scurbbed with brushes, washed with water and allowed to dry to this surface , apply chenmical policrete admixture at the rate not less than 2% by weight of cement and providing minimum 30 mm thick (average thickness) guniting mix (using 1 part of oridinary poartland cement 53 grade and 2 parts of ghaggar sand mixed with adhesive/admixture at the rate as directed) with a pressure of 2.2 to 2.5 kg per sqm by guniting machine and surfaces finished even and fair including necessary padding, shuttering form work etc and finally applying 5 mm thick cement plaster in CM 1:3 complete all as specified and directed by Engineer-in-Charge. | 150 | Sqm | 600 ₹90,000 | 990 ₹1.5 L |
| 8.00 | M & L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection complete as directed. | 65 | Sqm | 320 ₹20,800 | 190 ₹12,350 |
| 9.00 | S&F in repairs Gun-metal, glabe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed dia of bore of pipe 20mm complete all as specified and directed. | 4 | Each | 350 ₹1,400 | 400 ₹1,600 |
| 10.00 | Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store and S&F 15mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specifed and directed.complete all as specifed and directed. | 30 | RM | 120 ₹3,600 | 280 ₹8,400 |
Updated dates
Tender Value
₹45.9 L
EMD Value
₹91,840
Closing Date
11 Feb 2026, 6:00 pmClosed
GE (AF) SUBROTO PARK
GE (AF) Subroto Park, Delhi Cantt Delhi-110010
As described in Bill of quantities
2026_MES_748638_1
GE/SP/TOKEN-74/2025-26
Open Tender
Civil Works
120 days
GE (AF) SUBROTO PARK
As per NIT and tender documents
9 documents required · 9 mandatory
₹500
GE (AF) SUBROTO PARK
₹91,840
Yes
18 Mar 2026
15 Jan 2026
14 Feb 2026
15 Jan 2026
11 Feb 2026
30 Jan 2026
Taking down any type of existing roof treatment including bedding layer of concrete/mud any thickness in cement mortar and including removing material outside from MOD land complete all as specified and directed
M & L for cement concrete 1 : 2 : 4 type B-0 (using 12.5 mm graded stone aggregate) laid as in padding 50mm thick average over roof slabs for providing proper slope including finishing surface even and smooth without unsing extra cement with 150 ml bag cement water proofing compound by weight of cement complete all as specified and directed . Note : WPC will be measured and paid separately.
Cleaning and preparation of the surface to receive Fosroc Proofex ORG or its equivalent in approved make water proofing system shall be a sound base, any crack shall be treated with cementious repair mortar of Fosroc Renderoc CS or epoxy crack filling mortar by proper grooving arrangement complete all as specified and directed
Supply and fixing TPO membrane of nonflammable waterproofing of roof which shall be a 1.5mm thick loose laid TPO membrane layers overlapped to achieve a minimum weld of 110mm, Hot air welding can be either handapplied or by means of automatic machines and the rolls either end are overlapped with layers of non-woven geotextilefiber, the separation layer provided to prevent the mechanical abrasion and cushioning between the Fosroc Proofex ORG membrane or its equivalent in approved make and the concrete substructure, the termination of Fosroc Proofex ORG or its equivalent in approved make by aluminium strip anchoring. Note: Work shall be executed by authorised applicator with prior experience of more than 5 years in applying similar system.
Supply only Liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.
M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and as directed by the Engineer-in-Charge.
M&L for dismantling loose concrete cover of RCC slab, ceiling , columns, beams,chajja, balconies, staircase and as direceted, roughening and cleaning concrete surfaces with steel wire brushes, removing of rust from existing steel surfaces with rust removers of SIKKA restoff 100 applied two coast @0.15kg/Sqm per coat of steel surface and cleaning all rust with steel wire brush and washed with water and allowed to dry incl S&F welded fabric GI wire mesh or wire , size not less than 75 x 75 mm and 3 mm dia as reinforcement to concrete. After placing the additional re-inforcement, all concrete surfaces shall be throughly scurbbed with brushes, washed with water and allowed to dry to this surface , apply chenmical policrete admixture at the rate not less than 2% by weight of cement and providing minimum 30 mm thick (average thickness) guniting mix (using 1 part of oridinary poartland cement 53 grade and 2 parts of ghaggar sand mixed with adhesive/admixture at the rate as directed) with a pressure of 2.2 to 2.5 kg per sqm by guniting machine and surfaces finished even and fair including necessary padding, shuttering form work etc and finally applying 5 mm thick cement plaster in CM 1:3 complete all as specified and directed by Engineer-in-Charge.
M & L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection complete as directed.
S&F in repairs Gun-metal, glabe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed dia of bore of pipe 20mm complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store and S&F 15mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specifed and directed.complete all as specifed and directed.
Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store and S&F 20 mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor complete all as specifed and directed.complete all as specifed and directed.
Dismantling water tanks capacity exc 500 ltrs and n. exc. 1000 ltrs & removing to store complete all as specified and as directed.
S&F 1000 ltrs capacity rotational moulded polythelene water storage tanks (cylindrical or vertical with closed top)hoisted and fixed in position all as specified in SSR part I. complete all as specified and directed
Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed.
M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
M & L for cement concrete 1 : 2 : 4 type B-0 (using 12.5 mm graded stone aggregate) laid as in padding 50mm thick average over roof slabs for providing proper slope including finishing surface even and smooth without unsing extra cement with 150 ml bag cement water proofing compound by weight of cement complete all as specified. Note : WPC will be measured and paid separately.
Excavation in trenches n.exc 1.5m wide and n.exc1.5 m in depth for foundation, or shafts, wells, cess pits manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in any hard / dense soil complete all as specified and directed by Engr-in-charge. Note:- Manual digging is permitted, if mechanical excavation is carried out by the contractor all damages of existing services shall be repaired by the contractor at his own expenses.
Returning & filling in including spreading, levelling, watering & well ramming in layers n.exc 25mm thick in soft/ hard / dense soil complete all as specified and directed by Engineer-in-charge.
Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and directed
Taking down cement plaster on brick wall or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and disposed off unserviceable materials to out side of MOD land complete all as specified and as directed.
M&L 10 mm thick cement mortar 1:6, on fair surface of brick work or concrete surfaces on wall ( internal surfaces) surface even and smooth without using any extra cement all as specified and directed. Note : work will be executed upto fourth floor using scaffolding
M&L for rendering 5mm thick on fair faces of brick work or ceilings or concrete surfaces in cement mortar (1:3) as in ceiling, complete all as specified and directed
M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished surafaces even and smooth without using extra cement complete all as specified and as directed.
M & L Preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion over a coat of primer on walls complete all as specified and directed
M & L preparation of newly plastered surface and applying three coats of white wash on ceilings complete all as specified and directed
M&L for preparing new surface and applying exterior paint (weather coat, apex ultima) of required shade,Two coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm, complete all as specified and as directed by Engineer-in-Charge. make : Asian/Berger
M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply Two coats of distempering Ist quality acrylic distemper (ready mixed) having VOC content less than 50 gm/litre of approved manufacturer of required shade and colour over a coat of 1.50 mm thick (average) wall care putty to bring the surface even and smooth complete all as specified and directed
M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply two coats of white wash on ceilings complete all as specified and directed
M&L for complete removal of existing treatment machanically or mannually on old surface of wall and preparing surface and applying two or more coats 100 % acrylic based exterior emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt reistance 1st quality exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltr /10 sqm over and including priming coat of exterior grade primer applied @ 0.90 litre/10 Sqm including change of existing colour if required complete all as specified and as directed by Engineer-in-Charge. note; work will be executed upto fourth floor
S&F aluminium chequered grill of anodized section pf mesh100x100mm or 80x80mm of 8/6/mm dia of bar fixed to frame with 20x20mm aluminium flat section with screw complete all as specified and as directed.
S&F for powder coated (minimum thickness of powder coating 50 micron) aluminum anodized three track slinding window with two or more shutter with 5 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing ,handle lock,etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catlogue etc as specified as per manufacturer instructions with the following size, complete all as specified and directed by Engr-in-Charge. Note : (1)Glass and wire not measured and paid separately however cost of all other connected accessories deemed included in unit rate. (2) faces of windows jamb should be given fair finish before fixing the window as per requirement of site
Dismantling of Stone slabs laid, bedded and pointed in any mortar complete all as specified and directed
M&L for 16-18mm thick Granite slab on top of cooking plateform, bar counter window sill and simillar work including cutting polishing rounding on edge etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15mm thick screed bed in CM 1:4. including grinding and polishing complete all as specified and directed by Engr-In-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr in Charge.
M&L Glazed coloured ceramic tiles in vertical surface/ dado 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L vitrified tiles 10 mm thick ceramic coloured tiles 10 mm thick (square/rectangular) area of each tiles exc 0.18 sqm but n. exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed.
All as per item No 37 above but as vertical surfaces such as doado/skirting over and including renderning 10 mm thick in CM 1:4 complete all as specified and directed
M&L for Non skid ceramic coloured tiles (300mmx300mm) x7 mm thick in floors etc. Set and jointed in neat cemenbt slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortar 1:6 complete all as specifed and directed.
M&L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base of floor. complete all as specified and directed
M&L providing & fixing in repairs false ceiling with Semi perforated 12mm thick acoustical false ceiling, (fire retardant and sound absorbent) micro regular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 475 (Part 4) -1970 and light code description unit rate No 429 Sub Head : 26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per sqm including both sides) comprising of maint -T runners of size 15x32mm of length 300mm, cross -T of size 15x32 of length 600mm to form grid module of size 600x600mm , suspended from ceiling using galvanised mild steel items (galvanising @80 grams per sqmm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-Shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on perimeter wall /partition with the help of plastic rawl plugs at 450mm centre to canter and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engr-in charge.
Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each, incl removing complete and making good after fixing of new chowkat to match existing finish all as specified and directed by Engr-In-Charge.
Taking down chowkats or frames with shutters (with out taking off shutters from the frames) not exc 1.5 Sqm each , incl removing. making good after fixing of new chowkat to match existing finish complete all as specified and directed by Engr-In-Charge.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including making good complete as per direction of Engineer-in-Charge: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibbers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners not paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) moulded decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
S&F for Butt hinges of stainless steel 100mm size Heavy type complete all as spd and directed
S&F for 150mm long stainless steel handles, fancy type, fabricated type. complete all as specified and directed.
S&F for 200 mm stainless steel, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F for 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F in Door closer hydraulically regulated Aluminium (Die cast) body design No-3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed. Complete all as specified and directed by Engr-In-Charge.
S&F for door stopper of of brass body and tongue with hard drawn steel spring, (140mm size), complete all as specified and directed.
S&F in repair stainless steel pipes of 20-25 mm dia having wall thickness 1.40mm minimum as in curtain rods including bracket of steel to two number to each curtain rod and end caps of approved pattern complete all as specified and directed
S& F in repair 110 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches/floors/wall (using GI half round Clamp etc including removing from site complete all as specified and directed by Engr - in- charge.
S&F 110mm bore pipe PVC (SWR) bends any radius with oval acess door complete all as specified and directed by Engineer-in-Charge
S&F bands, straps supports or stays for rainwater ,ventilation pipes, including bolts if required conforming to fe-290 Gde-E-165 completely all as directed and specified by engiineer in charge.
S&F in repair for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
S&F in repairs vitreous china counter top wash hand basin of size 45cmx37cmx14.5cm white, , complete all as specified and as directed. (hindware Cat No.10104, or equivalent )
S&F 32 mm dia brass chromium plated bottle trap complete all as specified and as directed
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolt, flushing cistern and flush pipe) including making good complete all as specifed and directed.
S&F in repair for 10 ltrs capacity PVC valve less syphonic action type flushing cistern low level white inlet ball valve, float , flush pipe and handle including brackets and fixed complete all as specifed and directed.
S&F in repair for PVC connection 15mm dia and 600mm long complete all as specified and directed.
S&F in repair CP stop/angle valves, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed
S&F fancy type mirror of 8 to 10 mm thick glossy glass decorative/ designer type, any size and shape bevelled edges all-round as decided by EIC, wall mounted mirror complete all as specified and directed
S&F in repair for brass CP towel rail of 15mm dia with hook 600mm long complete all as specified and directed
S &F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed
S&F in repair CP bib taps long body , cast copper alloy, fancy type with wall flange, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm bore complete all as specified and directed by Engr-In-Charge. (hindware Cat F360004SCP or equivalent )
S&F In repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed
S&F in repair 15mm dia brass CP jet with CP flexible pipe 90cm long incl necessary fittings complete all as specified and directed
S&F as in repairs, liquid soap dispenser with s/s metallic bottle complete all as specified and directed
S&F hand drier in rugged multiple stoved, multiple grounded steel enclosure with one bracket for firm wall fixture having features of No touch operation, solid state time delay to allow user to keep hands in comfortable position complete all as specified and directed
S&F in repair for 15mm bore brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specifed and directed.
S&F in repair for15mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specifed and directed.
S&F in repair for sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and waste incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connectings union to pipe overall size 915mmx460mmbowl size 410mmx330mmx160mm complete all as per specified and directed.
S&F in repair for 15mm bore brass chromium plated kitchen mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall complete all as specifed and directed.
S&F in repair for brass CP shower rose 125mm size complete all as specifed and directed.
S&F in repair for brass CP shower arm 60cm long complete all as specifed and directed.
S&F for 75 mm bore PVC (SWR) pipe single socketed any length with rubber ring joints fixed on walls or laid in trenches , in floor or in under sunken system, including taking down complete all as specified and directed. NOTE :- Rate includes core cuttings of RCC slab/cutting holes in wall and all fittings as branch piece/ junction , single/ double/ triple , equal/ unequal.
S&F in repair 150mmx150mm floor drain with cockroach trap buld with 1mm thick 304 grade stainless steel with complete set ( Frame, drain cover, outer cup, inner cup etc. including jointing with solvent cement complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed
M&L cement concrete chequered tiles of size 300mm x 300mm x 25 mm thick machine pressed tiles, set and jointed in neat cement slurry in floors with grey cement and no pigment over and including 15 mm thick screed bedding layer in CM 1:6 complete all as specified and directed
M& L for 80 mm thick, M-40 grade machine pressed rubber form moulded precast interlocking concrete coloured (Red/yellow) paver block in any shape and size with grey cement and pigment as approved confirming to IS 15658-2006 complete all as specified and directed
M&L for 75 mm thick Cement concrete type D-2,(1:4:8) (using 40mm graded stone aggregate) as in sub floors, sub bases , floors and pavings/ paver blocks etc.,
M&L spreading and levelling of sand average 25 mm thick below inter locking paver complete all as specified and directed.
M&L cement concrete 1:2:4 type B-0(using 12.5 mm graded stone aggregate) as in roof kerb or mud stops rounded or chamfered on edge complete all as specified and directed
Taking down old unserviceable rolling shutter along with its running channel and all old accessories and giving fair finish to the surface for installing a new rolling shutter complete all as specified and directed
S&F steel rolling shutter ( thickness of latches 1.25 mm) without ball bearing as specified including top cover , anchoring rod ,hasp and staple and one shop coat of primer erected in position as indicated complete push pull or but gear operated type with bevel gear box and crank handle complete all as specified and directed by engr-in-charge.
M&L preparation of new steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
S & F roof trusses (framed), trussed, purlins, rafters , crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 410-W (Gde E- 250) quality A complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. Complete all as specified and directed.
M&L for 100 mm thick Cement concrete type B-2,(1:2:4) (using 40mm graded stone aggregate) as in , sub bases , floors and paving's/ paver blocks etc.complete all as specified and directed
Dismentaling old 200 mm bore inner dia pipe and removing it complete all as specified and directed
S&F 200 MM bore (inner dia) double wall corrugated HDPE pipes (SN8) in any length including all fittings and jointing with elastomeric rubber rings and couplers / other jointing materials as per manufacturers instructions, all as specified and directed.
M & L for cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch camel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required of 150 mm/200mm/300mm dia of pipe complete all as specified and directed
M & L for concrete bed PCC 1:4:8 Type D2 (Using 40mm graded stone aggregate) to drain pipes 200 mm dia including packing under and hunching against the sides of pipes after they are laid and tested all as specified and as directed
S&F in repair factory made SFRC manhole/drain cover (Grade M-25) heavy duty cover slab in rectangular shape of size as required 80 mm thick incl MS sheet 2 mm thick and 80 mm wide all around the cover complete spefcified and directed .
M&L for fabrication and erecting of sign board of size 1200 mm x 800 mm (size of ACP) erection in position including taking down old one as directed and adopting the following specifications / measurements: (a) Main Post 2 Nos of stainless steel pipe 50 mm dia & 1.5 mm wall thickness of grade 316, each post of length 2.00 metre (1.70 metre above GL and 0.30 metre below GL). (b) Frame around ACP, fabricated with 25 mm size stainless steel square tube with 1.5 mm wall thickness including fixing arrangement for ACP and welded on main post. (c) 2 Nos aluminium composite panel 3 mm thick (each of size 1200 mm x 800 mm) in non metallic colour of approved shades consisting of 2 mm thick mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating or equivalent, of approved colour and shade on exposed face and polymer (Service) coating on other face, fixed over SS frame mention at Sl No (b) above complete all per manufacturer's instruction & as directed. (d) Providing on Exposed face each ACP sheet, High intensity prismatic grade retro reflective sheeting as base and with cut out massage (legends borders, letters numerals, site map etc, as per design and pattern approved) with high intensity prismatic grade reflective sheeting, pasting as per manufacturers instruction. Make of sheet shall be 3M ,series 3930 or equivalent make approved by the GE. (e) Excavating 2 Nos post hole of size 300 mm x 300 mm x 450 mm in soft loose soil and fixing of main post and filled with PCC 1:2:4 type B1 using 20 mm graded stone grade, removing surplus soil to distance not exc 50 metre and site clearance as per site requirement and satisfaction of GE complete all as specified and directed .
M & L Providing precast cement concrete louvres and jallies, 25mm thick (measured solid), in cluding all mouldings but excluding frame in repairs with cement concrete type B-0 (1:2:4) (using 12.50 mm graded stone aggregate) set in cement mortar (1:4) , complete all as specified and directed
M&L for precast (factory casted) cement concrete kerb stone casted in PCC (1:2:4) type B1 using 20mm graded stone aggregate with plan or interlocking joints (as directed), making groove in ground of desired dimension, placing in erect position Kerb stone in edging and set and jointed in cement mortar 1:6, making good disturbed surface of ground complete all as specified and directed.
M & L for providing reinforced cement concrete Type B0 (1:2:4) (using 12.5 mm graded stone aggregate) as in copping, shelves roof kerbs or mud stops, rounded or chamfered edges, including necessary formwork complete all as specified and directed
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:6) finished even and smooth without using extra cement complete all as specified and as directed
M&L complete removing on existing treatment new/old surface of wall and apply 2 coat of plastc emultion paint over 2mm thick wallcare putty over 10cm girth or width, not otherwise described complete all as specified and as directed by the Engineer-in-Charge
Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) galzed and skeletal type decorative type WPC door shutter of 35mm having gauged wire mesh in size comprising of virgin polymer of K value 58-60(Suspension Grade), 2, 4, or 6 raised panel design calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus ofelasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: wire mesh shall be paid seperatetly.
S&F for 0.56mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.
S&F SS 150mm , barrel tower bolts extruded section.complete all as specified and directed by Engr-In-Charge.
S&F for Brass Mortice lock, vertical type, size 100mm 4 levers vertical complete all as specified and as directed by the Engineer-in-Charge
M&L for sand cushioning to under ground cable provided with layer of sand (8 cm deep before laying the cable and 15 cm deep after laying the cable i.e total 23 cm) complete all as specified and directed by engineer-in-charge.
Supply and laying un-reinforced precast concrete cable cover Class LV ,Type I ,flat size 250mm x 150mm x40 mm laid in trenches as protection to cable complete all as specified and as directed by Engr-in-Charge.
Taking out old unserviceable LT under ground cable of any type/ size from trenches, pipes & poles complete all as specified and directed by engineer-in-charge..
Supply Laying and testing of cable XLPE insulated armoured heavy duty under ground 1100 volt grade with stranded aluminium conductor of 185 Sqmm 3.5 core sizes in trenches /passing through pipes/ on poles etc complele all as specified and directed.
Supply Laying and testing of cable XLPE insulated armoured heavy duty under ground 1100 volt grade with stranded aluminium conductor of 120 Sqmm 3.5 core sizes in trenches /passing through pipes/ on poles etc complele all as specified and directed.
Supply Laying and testing of cable XLPE insulated armoured heavy duty under ground 1100 volt grade with stranded aluminium conductor of 16 Sqmm 4 core sizes in trenches /passing through pipes/ on poles etc complele all as specified and directed.
Design, supply, install, testing and commissioning factory made LT Panel Outdoor type, cubical enclosure compartmentalized external and internal mirror type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc.The enclosure shall be made of 2.00 mm thick stainless steel sheet SS 316 sheet. The fixing of double doors shall be on SS hinges with anti-theft provision. All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 316. Sliding handle and locking arrangement front and rear both side. Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50 Hz. Degree of protection shall be IP-54. The enclosure shall have provision of cable entry. Cable entry from bottom side in separete cable alley on both side ,separated with bakelite sheet of suitable size including internal wiring with PVC insulated solid, copper wire, 1100 volts grade. The panel shall consist of 600 Amps rating TPN aluminium bus bars and shall be provided with colour coded heat shrinkable sleeves. The panel shall be provided with separate compartments for each switch grar, including instrumentation such as Multi Function meter, phase indicating lamps etc with double stud hinged door, front & rear openable with locking arrangement including interlocking with switch gears and suitable for 1100 Volts grade, 3 Phase, 415 Volts, 50 cycles, AC Supply and to with stand short circuit fault level of not less than 10KA. The panel shall be fixed with angle iron frame made of angles of size 50 X 50 X 6mm, embedded 200 mm below ground level in PCC 1:2:4, Type B-1 using 20mm grade stone aggregate, 600 mm above ground level and comprising the following: (a) Incoming MCCB 400 Amps 4 Pole, 36 kA, Ics=100%Icu- 1 No. with RHOM (b) Outgoing MCCB 250 Amp 25 KA 3 pole ,Ics=100%Icu-01 Nos with RHOM (c) Outgoing MCCB 160 Amp 25 KA 3 pole ,Ics=100%Icu-01 Nos with RHOM (d) Outgoing MCCB 125 Amp 25 KA 3 pole ,Ics=100%Icu-01 Nos with RHOM (e) Outgoing MCCB 100 Amp 16 KA 3 pole ,Ics=100%Icu-01 Nos with RHOM (f) Digital Multifunction Meter to measure V, A, F, PF, KWh including CT complete with all electrical connection - 01 No (g) LED type Phase indicator lamps (R, Y, B) with Control MCB 6 Amps SP- 1 Set Note : (i) Rates are inclusive for fixing of suitable size cable gland if required in existing or new cable, CT and electrical connections complete to function multi functional meter. (ii) Danger notice plate must be fixed on panel. The panel manufacturer should have following Govt. Approved Certificates: 1. Panel should be according to IEC-61439. CPRI Certification Degree of Protection IP-54 2. IS/IEC : 61439 (Part -I & Part-II) 2011 & all necessary certification as per relevent IS/IEC Codes.
Design, supply, install, testing and commissioning factory made LT Panel wall mounted type , cubical enclosure compartmentalized external and internal mirror type brushed suitable for highly corrosive environment, high creep resistance, better mechanical properties like ductility, yield strength, hardness etc.The enclosure shall be made of 2.00 mm thick stainless steel sheet SS 316 sheet. The fixing of double doors shall be on SS hinges with anti-theft provision. All fabrication/welding shall be done with TIG/MIG or as approved by Engineer in charge suitable for SS 316. Sliding handle and locking arrangement front and rear both side. Enclosure shall be suitable for AC supply system 415 volts, 3 phase, 4 wire, 50 Hz. Degree of protection shall be IP-54. The enclosure shall have provision of cable entry .cable entry from bottom side in separete cable alley on both side ,separated with bakelite sheet of suitable size including internal wiring with PVC insulated solid, copper wire, 1100 volts grade. The panel shall consist of 400 Amps rating TPN aluminium bus bars and shall be provided with colour coded heat shrinkable sleeves. The panel shall be provided with separate compartments for each switch grar, including instrumentation such as Multi Function meter, phase indicating lamps etc with double stud hinged door, front openable with locking arrangement including interlocking with switch gears and suitable for 1100 Volts grade, 3 Phase, 415 Volts, 50 cycles, AC Supply and to with stand short circuit fault level of not less than 10KA. The panel shall be fixed on wall using necesary fixing arrangment and comprising the following: (a) Incoming MCCB 200 Amps 4 Pole, 25 kA, Ics=100%Icu- 1 No.with RHOM (b) Outgoing MCCB 100 Amp 16 KA 3 pole ,Ics=100%Icu-01 Nos with RHOM (c) Outgoing MCCB 63 Amp 16 KA 3 pole ,Ics=100%Icu-01 Nos with RHOM (d) Outgoing MCB DP 40 Amp-02 Nos (e) Digital Multifunction Meter to measure V, A, F, PF, KWh including CT complete with all electrical connection - 01 No (g) LED type Phase indicator lamps (R, Y, B) with Control MCB 6 Amps SP- 1 Set Note : (i) Rates are inclusive for fixing of suitable size cable gland if required in existing or new cable, CT and electrical connections complete to function multi functional meter. (ii) Danger notice plate must be fixed on panel. The panel manufacturer should have following Govt. Approved Certificates: 1. Panel should be according to IEC-61439. CPRI Certification Degree of Protection IP-54 2. IS/IEC : 61439 (Part -I & Part-II) 2011 & all necessary certification as per relevent IS/IEC Codes.
M&L in replacement of earth contuinity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanized iron or steel wire complete all as specified and directed by Engineer-in-Charge.
M&L for earth continuity conductor of size 25X4 mm galvanised strip strip fixed on walls / burried in ground with and including fixing arrangments on walls like porcelain insulators screws washers etc complete all as specified and as directed by Engineer-in-charge
Making good for road to existing surfaces with using of patch premix bitumenous 25mm thick polymer based material over WBM 75mm thick including rolling etc all as specified and as directed by Engineer-in-charge
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.85 MB
BOQ_838402.xls
BOQ • 2.32 MB
Tender74.pdf
Tender Documents • 1.46 MB
Download all tender documents and submit your bid