Erection of 6.6KV O/H Line from (1) TSS 4201 to Quarry-2 sump Up-coming departmental patch sump, Route length-700M 400M respectively and (2) TSS 4205 to Rajdhar railway siding Route length-800M etc as required under ppr patch of Ashok OCP..

Amount

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size(foundation) including excavation and refiling and secured with holding clamps , bolts , nuts etc as required.

Erection of all Aluminium conductor of 7/1.96mm to 7/3.1mm diameter including binding etc as required.

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, olts, nuts, washers etc

Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required

Erection of G.I. Wire No. 8 SWG including binding etc. as required

Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required upto 120 sq. mm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 120 sqmm size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required

Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supply of 8 SWG GI wire. (Note- Rate taken as per 6 swg GI wire from CPWD 2022 for per Kg )

Making of two lengths of channel iron 100 mm X 50 mm X 6 mm(9.5 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required

Fabrication of channel iron 100 mm X 50 mm X 6 mm (9.56 kg per metre) V shape cross arm for two 11 KV over head line conductors complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts, washers etc and painting with primer and finish paint as required .

Erection & making of a set of cradle guard bracket fram for 11 kv over head line having 2 nos fabricated out of 65 mmx 65mmx6mm angle iron to make a cradle guard.erection & making of a set of cradle guard bracket fram for 6.6 kv over head line having 2 nos febricated out of 65 mmx 65mmx6mm angle iron to make a cradle guard.

Fixing GOAB & Horn Gap fuse switch unit

Painting of pole

Providing GOAB Switch, 11KV, 800A

Providing Horn Gap Fuse Unit, 200A, 11KV

Total impact of GST for the purpose of CTC

M/S SHIV CONSTRUCTION

M/S D.K. ENTERPRISES