Repairs to Plumbing, Internal water supply,sanitary fittings, Joinery and Rolling shutter at No 2 AFSB Mysore

Amount

Taking up or down 15 mm steel or CPVC tubing and connections, including cleaning for re-fixing or removal to store

S&F 'Medium grade' galvanised Tubes 15 mm dia, with all tube fillings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc., fitting and fixed complete to walls and ceilings or laid in floors.

S&F of CPVC pipes SDR 11 & plain CPVC SDR 11, 16 mm outer dia, with all tube fillings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc., fitting and fixed complete to walls and ceilings or laid in floors.

Taking up or down 20 mm steel or PVC tubing and connections, including cleaning for re-fixing or removal to store

S&L ' Medium grade' galvanised Tubes 20 mm dia, with all tube fillings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc., fitting and fixed complete to walls and ceilings or laid in floors.

S&L of CPVC pipes SDR 11 & plain CPVC SDR 11, 20 mm outer dia, with all tube fillings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc., fitting and fixed complete to walls and ceilings or laid in floors.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing),complete all as specified and directed.

S&F Non - skid Ceramic colouerd tiles 7 to 8 mm thick (square/ rectangular) of each tile exceeding 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed or bedding layer of mortar 1:4.

S&F Glazed ceramic coloured tiles in verticle surfaces 350 x 250 x 7 / 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing coat in CM 1:3.

S&F in Repairs PVC Water tanks Lids / covers with PVC Locking device for tank capacity in liters Exc 500, n exc 2000 .

S&F in Repairs PVC Rotational moulded polyethylene water storage tanks 500 Liter (cylindrical vertical with closed top) hoisted and fixed in position all as specified and Dismantling water tanks and removing to store.

All as per above but 1000 ltr Capacity

S&F in repair15mm dia bore Greenly water saving Bib Taps long Body/Short body With Aerator or flow regulator cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.with connected accessories with complete all as specified and directed. Make :- Parryware cat part No - T 4604A1/G5204A1

S&F in repair15mm dia bore Greenly water saving Pillar Taps With Aerator or flow regulator cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.with connected accessories with complete all as specified and directed. Make :- Parryware cat part No - T 4601A1/G5201A1

S&F in Repairs stop valve fancy type chromium plated 15mm dia,cast copper alloy screwed down high pressure with crutch or butterfly handle ,screwed both ends for iron pipes or PVC connection.

All as per above , but 20mm size.

S&F in Repairs Gun Metal Globe or Gate Valves 15 mm dia size, with iron wheel head or any type, screwed both ends for iron pipe.

All as per above Sl item no 17, but 20 mm size

All as per above Sl item no 17, but 25 mm size

S&F in Repairs PTMT Bib tap long body standard of any colour 15mm in size. (Minimum weight 15mm-120gms).

S&F in Repairs PVC connection 15 mm size with PTMT nuts of length 450 mm

All as per above Sl item no 21 but length 600 mm

All as per above Sl item no 21 but length 900 mm

S&F in Repairs PVC valveless, syphonic action type, flushing cistern 10 liters capacity, low level, white, with inlet, ball valve, float and handle including brackets.

S&F in Repairs Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, 15mm dia.

All as per above Sl item no 25, but suitable for urinals, 15mm dia.

S&F in Repairs seat cover for Water closet any type or different sizes.

S&F in Repairs Vitreous china squatting pan, orissa pattern, size 580 x 440 mm white with integral foot rest complete including provision of cement concrete.

S&F in Repairs vitreous china, pedestal pattern complete including provision of cement concrete.

S&F in Repairs vitreous china bowl urinal flat back, white complete of size 465 x 355 x 265 mm with grating and Union for discharge pipe. Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in Repairs Vitreous china wash basin, white, flat back, size 630 x 450 mm including brackets. & Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe. Note : Including Bracket.

S&F in Repairs Tubular towel rail 20 mm dia, D type 60 cm long aluminium anodised between flanges .

S&F in Repairs Brass chromium plated shower rose 125 mm size. Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete.

S&F in Repairs PTMT 32mm dia bottle trap for wash basin with inlet and out let screwed for pipes or connecting incluiding necessary packing, union and cap and fixed.

S&F in Repairs 32mm dia PVC flush pipe on one side fixed to low level flushing cistern and other side to squatt pattern closet cost including making good to floor.

S&F in Repairs Brass CP mixer 15mm size for mixing hot & cold water screwed down for iron pipe and fixed.

S&F in repairs PVC Bathroom cabinet Standard Size.

S&F in repairs 15 mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed.

S&F in repair toilet paper holder of brass, chromium plated fixed to walls with chromium plated brass screws complete.

S&F in repair PVC Jet spray / heath fauset with connecting PVC pipe of length 900mm.

Dismantling of 100 / 75 mm dia CI pipes, jointed in cement mortar and taking out of trenches or floor/wall, if required.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints laid in floor or trenches 110 mm bore pipe.

All as per above Sl item no 43 but 75mm bore pipe.

S&F PVC (SWR) branches pieces single ' Y / bends / Tee (equal or unequal ) of 110 mm bore.

All as per above Sl item no 45, but 75m m bore pipe.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repair Aluminium, anodised, barrel tower bolts 200mm long of extruded section.

S&F in repair Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F in repair Butt hinges 100mm size, medium weight, cold rolled mild steel.

S&F in repair Butt hinges 75mm size, medium weight, cold rolled mild steel.

S&F in repair mild steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete

S&F in repairs floor door stopper 140 mm in length of aluminum alloy body and tounge anodised with hard drawn steel spring fixed in floor.

S&F in repairs Aluminium (Diecast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width & of weight between 36 to 60kg.

S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire & average width of aperture 1.40mm with tinned tacks, or galvanised wire staples

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing new ones.

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane.

S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each.

S&F 2nd class soft wood 30 mm in thickness wire gauzed & skeleton shutters, open rebated & prepared to receive wire gauze, etc. edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire & average width of aperture 1.40mm with tinned tacks, or galvanised wire staples

S&F in repairs 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides

Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer

S&F Aluminium, anodised, barrel tower bolts 150 mm long of extruded section.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel.

S&F Aluminium handles 100mm size, cast type, anodised

S&F 150 mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring.

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with M.S Square tubes, supporting & fixing in opening as per specification all as specified and as diercted.

S&F factory made solid PVC Moulded door shutter ,30 mm thick (style)consisting of frame made out of MS tubes for top & Bottom rail , MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail : panelling of both side prelam PVC sheet to be fitted in the ms frame welded/sealed to the stiles & rails with suitable PVC seat beading ,and jointed together with solvent cement ,supplying and fixing in the frame at site as per specified and directed by Engr-in-Charge.

S&F Butt hinges, medium weight cold rolled mild steel 100 mm in size.

S&F Aluminium alloy, anodised, sliding door bolt 150 mm in length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.

S&F Aluminium anodised, barrel tower bolts of extruded section, 100 mm in length.

S&F Aluminium handles, cast type 75 mm in size.

Taking down hood covers of gear operated rolling shutters of opening width exc 4.00 m and height exc 5.00 m, keeping shutter for repair, cleaning old grease, dust etc from gear box, vertical rod, bushes, bearings, springs and guide channels, complete lightening of shutter, strips and other parts, greasing/oiling of all moving components incl springs, minor welding works if required and replacement of worn out/unserviceability or rolling shutter for proper functioning.

All as per SI item no 76 here-in-before but width n exc 4.00 m and height n exc 5.00 m.

Repair to collapsible steel gates n exc 9 sqm, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners position and securing runners with hold fast and brackets, complete greasing and oiling to movable position and replacing old runners if required.

S&F in repair harrison rails, aluminium alloy powder coated with fixing brackets, stops,etc.complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F in repair brush seal Metal door draft stopper , under door sweep blocker seal strip, aluminum sweeps for home doors rodent proof any colour complete all as specified.

KUZHIKKAL ENTERPRISES

ANAND REFRIGERATION

JM Engineering

Moulya Builders

Aditya Associates

SRI LAKSHMI VENKATESHWARA ENTERPRISES

SAPTHAGIRI CONSTRUCTIONS