Repair Of Painted Canal Service Road of Kariya Dy. From Km.5.800 to Km. 8.200 and Renewal or Reconstruction Of Painted Canal Service Road of Kariya Dy. From Km. 8.200 to Km. 9.300.

Amount

Earth work in canal Earth work in closing and repairing cuts and pot holes on the shoulders of the service road in all types of soil including all lead and lift complete with dressing and manual compaction

WBM Grading II Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness hand packing rolling with smooth wheeled roller 80 to 100 Km in stages to proper grade and camber applying and brooming stone screening to fill up the interstices of coarse aggregate watering and compacting to the required density Grading II as per MORD Specification Clause 405

WBM Grading III Providing laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness hand packing rolling with smooth wheeled roller 80 to 100 Km in stages to proper grade and camber applying and brooming stone screening to fill up the interstices of coarse aggregate watering and compacting to the required density Grading III as per MORD Specification Clause 405

Prime Coat Slow Setting Providing and applying prime coat with bitumen emulsion of specified grade on the prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70Kg per sqm as per MORD specification

Tack Coat Providing and applying tack coat with bitumen VG 10 using emulsion distributor at the rate of 0.30 Kg per sqm on the prepared bituminous granular base surface cleaned with mechanical broom as per MORD specification

20mm thick Open Graded Premix Carpet using Bituminous Providing laying and rolling of open graded premix surfacing of 20 mm thickness composed of specified size aggregates either using penetration grade bitumen or cut back or emulsion to serve as wearing course on a previously prepared base including mixing in a hot mix plant transpotation to the site laying with paver finisher to the required grade level and alignment and rolling with a smooth wheeled roller 80 to 100 Km capacity finished to required level and grades as per MORD specification.

Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels grade and cross fall using Type C seal coat As Per MORD Specified Clause 510

J M D CONSTRUCTION AMD SUPPLIAR