Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.1 LAccepted-AOC | L1 | Accepted-AOC Lowest Tenderer | |
| 2 | L2₹8.2 L+₹1.1 L (15.6%)Rejected-Finance | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹8.5 L+₹1.4 L (19.8%)Rejected-Finance | L3 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹9.7 L
EMD Value
₹19,400
Closing Date
19 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (R)
AGE (I) CIF(R) C/O 56 APO
PROVN OF ADDITION/ALTERATION TO OR DINING HALL (T-50) OF SIG REGT UNDER AGE(I) CIF (R).
2022_MES_564003_1
AGE(I)/R-22/2022-23
Open Tender
Civil Works
Item Rate
180 days
AGE (I) CIF(R)
Class E and above and category a (i)
8 documents required · 8 mandatory
₹500
AGE (I) CIF (R)
₹19,400
Yes
9 Jan 2023
18 Nov 2022
24 Dec 2022
18 Nov 2022
19 Dec 2022
3 Dec 2022
Amount
Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness ( below or above ground level) complete, all as specified.
Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, M&L Brickwork with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store, bore of pipe 15mm complete all as specified and directed by Engineer-in-Charge.
S&F anodised aluminium snap grid frame work of size 605 x 605 mm for false ceiling complete all as specified and directed by engr-in-charge.
M&L for exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed by engr-in-charge.
M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sub floor/levelling course finished even and rough to receive the topping layer (w/o using extra cement) complete all as specified and directed.
M&L for Light Shade Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm th screed in CM 1:6 complete all as specified and directed by engr-in-charge.
M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.
M&L for complete removal of existing treatment including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss efflorescent salts and trading oil and greasy spots and applying two coats of oil emulsion distemper on walls over a coat of primer, after application of 2mm thick wall care putty on wall to achieve smooth surface by using sand papers complete all as directed by Engineer-in-charge
M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6) complete all as specified.
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and fair without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for Glazed ceramic coloured tiles in vertical surface 350x250x 7 mm/450x350x7mm thick laid over 10mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by engr-in-charge.
M&L for reinforced cement concrete (nominal mix) type B-1, 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by engr-in-charge.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat complete all as specified and directed by engr-in-charge.
S&F mild steel TMT bars 10mm dia and above, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.
M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.
M&L for preparation of new plastered surfaces and applying two coats of white wash on ceilings complete all as specified and directed by Engineer-in-charge.
S&F 15 mm bore steel water tubing medium grade galvanised with all fittings such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc laid in wall and floor etc complete all as specified and directed.
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), 15mm bore of pipe complete all as specified and directed.
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick masonry, complete all as specified.
S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, waste coupling and waste pipe, etc; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair bib taps, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed by Engr-in-Charge.
Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge
M&L for point wiring for one light/fan point controlled by one switch surface type with PVC insulated unsheathed copper cable FRLSH 1.5 sqmm multi stranded two single copper conductor in and including suitable size of PVC conduit/ PVC Casing and Caping complete with all accessories and with 1.5 sqmm PVC insulated copper cable FRLSH continous earth wire, re-recessed mounting pressed steel GI sheet box 2.0 mm thick suitable for switch/socket and 3mm thick laminated hylum sheet of adequate size all as specified and directed.
All as per item No. 27 but for one 5 pin 5 Amps socket outlet on independent board.
All as per item No. 27 but for one 5 pin 5 Amps socket outlet on same board.
M&L for power point wiring surface type with PVC insulated unsheathed copper cable FRLSH 2.5 sqmm multi stranded two single copper conductor including PVC conduit pipe 20 mm dia/PVC Casing and Caping complete with all accessories and with 2.5 sqmm PVC insulated copper cable FRLSH continous earth wire, re-recessed mounting pressed steel GI sheet box 2.0 mm thick suitable for switch/socket and 3mm thick laminated hylum sheet of adequate size all as specified and directed.
S & F in replacement switch paino type 6 Amps one way 230 volts AC complete all as specified and directed.
S & F in replacement socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and directed.
S & F in replacement switch paino 16 Amps type one way 230 volts AC complete all as specified and directed.
S & F in replacement socket outlet 6 pin, 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and directed.
S&F in replacement of ceiling rose, surface bakelite 65x50mm, three terminal complete all as specified.
S&F in replacement fan regulator, electronic step type feavy duty 230 volts complete all as specified and direceted.
S&F in replecement of unseviceable Ultra slim LED light to new 36W LED recess mounted bakalite panel 2 x 2 luminaire suitable for surface/grid ceiling for low ceiling applications complete with tube, driver and connecting cable including making electric connection to ceiling rose or connector complete all as specified and as directed. Make Havells Cat part No.STRATO2X2PLR36WLED830MOD or equivalent Wipro/Philips
Supply and fixing in replacement of sheet metal enclosure MCB distribution board TPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail, complete all as specified and directed.
S & F MCB single pole 6 to 30 Amps, 10KA, 230 volts 'C' series, complete all as specified and directed.
Supply and fixing MCCB 100 Amps, three pole, 415 volt with breaking cap 16 KA, complete all as specified and directed.
S & F XLPE cable, insulated,armoured, heavy duty electric cable with aluminium conductor,1100 volts grade, cross-sectional area 50 Sqmm 3.5 core, complete all as specified and directed.
Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below and above 15 cm of earth plate. GI plate connected with galvanised iron strip of 25x4mm by means of Copper nuts, bolts and washers. Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following:- (a) GI strip of size 25mm x 4mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm internal dimension constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC 1 :2:4 type B0 reinforced with 8mm dia deformed bars @100 mmc/c bothways pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of 40x40x4 mm for 30x30 cm PCC pit for holding the pit cover. (e ) Apply two coat of syntheticnenamel paint over one coat of red oxide zinc chrome primer on exposed steel surfaces and two coat of hot tar on embedded portion of steel surfaces.
M&L GI Earth wire size 04 mm as earth continuty conductor.
M&L in replacement of sub main wiring with two run of single core PVC insulated FRLSH stranded copper conductor cable of size 4 Sq mm and one run of 4 Sq mm PVC insulated FRLSH copper conductor cable as earth continuity conductor drawn in and including PVC rigid conduit/casing and caping complete all as directed.
S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
Supply, installation, commissioning of Metal Top Deep Freezer single phase 240 volt, 50 Hz of capacity 320 Ltr, complete all as specified and directed.
Supply, installation and commissioning of refrigerators, electric driven (single phase), capacity 360 Litres .BEE 5 star rate, complete all as specified and directed.
Supply and Fixing in replacement of of sheet metal enclosure, SPN type with two pin & earth plug and socket Industrial type DB with and including one MCB SP, C Curve type of capacity 25 Amp, 10 KA complete all as specified and directed.
Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store.
Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc
Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and directed.
Excavation in trenches in any type of soil not exc 1.5m wide and n.exc 1.5m in depth for electric poles stay foundation and under ground electric power cables and getting out, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in any type of soil complete all as specified and directed.
Removing surplus spoil to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.50m from the starting point, all as specified .
Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I, complete all as specified and directed by Engr-in-Charge.
M&L for Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class ‘B’ (old size) bricks laid dry flat, complete all as specified and directed.
Supply and laying of GI pipe 50 mm dia type medium grade for under ground cable complete all as specified and directed by Enginer-in-Charge
Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 8,791.00 during AOC Note:- Tenderers shall not quote for this Schedule
ABINASHI ENTERPRISES
M/S RAHUL GUPTA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .