Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.0 LAccepted-Finance 1296 SECTOR 41 B CHANDIGARH 160036 | CHANDIGARH | CHANDIGARH | 160036 | ₹2.0 L | 1 | Accepted-Finance DUE TO L-1 AGENCY |
| 2 | 2₹2.1 LRejected-Finance 1017 SMALL FLAT DHANAS U T CHANDIGARH | ₹2.1 L | 2 | Rejected-Finance RATE ON HIGHER SIDE |
| 3 | 3₹2.3 LRejected-Finance 230 SECTOR 12 PANCHKULA | PANCHKULA | ₹2.3 L | 3 | Rejected-Finance RATE ON HIGHER SIDE |
| 4 | 4₹2.4 LRejected-Finance 11 NO 870 SECTOR 13 A CHANDIGARH | ₹2.4 L | 4 | Rejected-Finance RATE ON HIGHER SIDE |
Updated dates
Tender Value
₹2.5 L
EMD Value
₹5,068
Closing Date
30 Apr 2026, 11:00 amClosed
XEN CP3
XEN CP3 SEC 16 CHD
AR TO RB TYPE VII (HOUSE NO. 297) UNDER MAINTENANCE BOOTH SECTOR 16 CHANDIGARH.
2026_CHD_91796_1
CP3/2026/2733159
Open Tender
Civil Works
15 days
SECTOR 16 CHANDIGARH
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹5,068
4 May 2026
17 Apr 2026
30 Apr 2026
17 Apr 2026
30 Apr 2026
17 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat | - | SQM | - | - | |
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | - | SQM | - | - | |
Providing and applying cement based putty (Birla, Jk or equivalent) to the required finish complete in all respect and to the entire satisfaction of Engineer-in-charge. | - | SQM | - | - | |
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. | - | SQM | - | - | |
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm). | - | SQM | - | - | |
Providing and fixing golden champ wood chowkhat (kiln seasoned) 4 1/2" x 2 1/4"including cost of corner straps, iron hold fasts, hinges, screws,nails, fevicol etc. and painting two coats of wood preserver to sides of chowkhats. Rate includes the cost of dismantling of all damaged chowkhats and making good the damage to walls plaster and floors as required including, disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats synthetic enamel paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-Charge. | - | RMT | - | - | |
Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked with both side commercial face in the existing chowkhat. The rate includes the cost of iron hinges, all necessary Aluminium fittings and painting two coats over one coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge. | - | SQM | - | - | |
Providing and fixing wire mesh 12x22 guage over fixed portion or wire mesh shutter including the cost of nails, putty etc. complete in all respect to the entire satisfaction of Engineer-in-charge. | - | SQM | - | - | |
Providing and fixing 4mm thick plain glass panes with beading when required over exixting chowkhat or fixed shutter or fixed portion or glazed shutter including the cost of nails, putty etc. complete in all respect to the entire satisfaction of Engineer-in-charge. | - | SQM | - | - | |
Providing and fixing of kitchen cabinet shutter only made out with 19mm thick commercial ISI marked plyboard and shutter of the cabinet furnished with 1mm thick superior quality sun mica of outer side and 0.8mm thick sun mica inner side of the cabinet for fixing the kitchen accessories and jack at bottom synthetic enamel paint over remaining portion. It is also include the cost of sprit polishing on the edge of the lipping cost of stainless steel handle, adhesive, nail, screws etc. complete fixed in position to the entire satisfaction of Engineer-in-Charge. | - | SQM | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.35 MB
BOQ_112311.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid