Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹80.1 LAccepted-AOC S NO 279 1 1A PLOT NO 113 KUTWAL COLONY SASTHE WASTI LOHEGAON PUNE 411 047 | PUNE | MAHARASHTRA | 411047 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹83.3 L+₹2.7 L (3.38%)Rejected-Finance 302 SIDDHIVINAYAK APPT A WING MUMBAI K K MARG JACOB CIRCLE MUMBAI CITY MAHARASHTRA 400 011 | MUMBAI | MAHARASHTRA | 400011 | L2 | Rejected-Finance NOT BEING L1 | |
| 3 | L3₹84.5 L+₹3.9 L (4.81%)Rejected-Finance C2 PAIXOMONTIRO APTS BEHIND NSD ALTO DABOLIM VASCO DA GAMA GOA 403 801 | SOUTH GOA | GOA | 403801 | L3 | Rejected-Finance NOT BEING L1 | |
| 4 | L4₹85.2 L+₹4.6 L (5.76%)Rejected-Finance H NO 767 NEAR OLD POST OFFICE NEW VADDEM VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L4 | Rejected-Finance NOT BEING L1 | |
| 5 | L5₹92.7 L+₹12.1 L (15.0%)Rejected-Finance SHOP NO 106 1ST FLOOR ASHOKA SHOPPING CENTRE LT ROAD MUMBAI 400001 | MUMBAI | MUMBAI | MAHARASHTRA | 400001 | L5 | Rejected-Finance NOT BEING L1 |
Tender Value
₹1 Cr
EMD Value
₹1.8 L
Closing Date
3 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CHIEF ENGINEER (CG) GOA
CHIEF ENGINEER (CG) GOA 403806
ADDITION ALTERATION TO OLD CGOM AT MANGOOR HILL GOA
2023_MES_591893_1
83016E8
Open Tender
Civil Works
Item Rate
270 days
GOA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹1,000
GE (I) CG GOA
₹1.8 L
Yes
23 Jun 2023
28 Apr 2023
5 Jun 2023
28 Apr 2023
3 Jun 2023
20 May 2023
Amount
Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling,louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises complete all as specified and as directed.
Cleaning the existing surface of concrete and reinforcements as obtained after execution of item No. 01 here in before by wire brush including scrapping & cleaning with emery paper or by air blasting or sand blasting incl foreign matrials , loose concrete/aggregate etc and washing down with water as required complete all as specified and as directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed
Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.
Material and labour for mild steel TMT deformed bar or twisted bars upto 10mm dia as in stirrups cut to lenth bent to shape required including cranking ,bending etc and lapping ,welding as directed to the existing one complete all as specified and as directed. Note for item No 3 to 5: Welding shall be measured and paid separately under appropriate item.
Material and labour for welding in repairs n. exc 2.5cm in length and thickness of metal to be welded exc.6mm but n.exc. 9mm complete all as specified and as directed.
Material and labour for welding in repairs exc 2.5cm but n.exc.5cm in length and thickness of metal to be welded exc.9mm but n.exc. 20mm all as specified and as directed.
Removing of concrete all around reinforcement including from behind the reinforcing bars to give an average 25mm (but not less than 15mm clear air gap)by manual methods (using wire brushing ,chiselling etc) and applying alkaline rust removing chemical followed by removing rust including from behind the reinforcing bars by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer,s instruction to give it a totally rust free finished steel surface complete all as specified and directed by Engr-in-charge.
M & L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and directed by Engr-in-charge. ( Make : SIKA/FOSROC or any other equivalent as approved by GE )
Supply and application of Epoxy Zinc rich primer on the prepared steel surface by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 complete all as specified and directed by Engr-in-charge. ( Make : SIKA/FOSROC or any other equivalent as approved by GE )
M & L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-30 to the effected beam, column facia etc . The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minium tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as specified and as directed. ( Make : SIKA/FOSROC or any other equivalent as approved by GE )
M&L for applying curing compound over concrete surfaces as per manufactures instruction complete all as specified and directed by engr-in charge (Make; Sika/Fosroc or any other equivalnet as approved by GE)
M&L for providing reinforced cement concrete M 30 Design mix( using 20mm grade stone aggregate ) as in chajja, facia, railing and parapet complete all as specified and as directed
Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed
Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.
Use and waste of formwork to sides of sides and soffits of beams, lintels, floors etc. for rough finished concrete surfaces complete all as specified and as directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works n.exc. 200mm thick etc for rough finished concrete surfaces complete all as specified and as directed
Use and waste of formwork to fins, facia, louvers. parapet, chajja etc for rough finished concrete surfaces complete all as specified and as directed
Demolation of floor tile /cement concrete un-reinforce in ground floors and pavings n. exc 15 cm thickness (below or above ground level)
M&L 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded brick aggregate) for plinth protection, paving and path complete all as specified and as directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.
M&L for Vetrified Ceramic coloured dark shade tiles 10 mm thick (square/rectengular) polished, area of each tile n. exc 0.36 sqm as in floors/vertical surface, set and jointed in neat cement slurry and pointed in coloured cement to match the surface screed bed of 15 mm thick of cement mortar 1:4 complete all as specified and directed.
M&L granite (of any type) 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing after roughing to surfaces over screed bed of 15 mm thick of cement mortar 1:3 complete all as specified and directed.
M & L Mirror polishing Machine cut kota stone slab flooring 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
S & F Non skid ceramic coloured in floor joint free tiles 7 mm to 8mm thick (square /rectangular) area of each tiles exceeding 0.18 sqm but n . Exc 0.36 sqm superior premium quality, grade B-1 as per IS in Water splashing floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed or bedding layer in cement mortar 1:4 .all as specified and as directed.
S & F glazed and coloured ceramic tiles (300 x 450mm) x 6 to 7 mm thick, finish as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 on fair faces on brick/ concrete surfacesall as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stone work and precast concrete articles.
M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces all as specified and as directed.
M&L rendering 15mm thick in CM 1:6 on fair faces of brick/concrete walls, finished even and smooth without using extra cement all as specified and as directed.
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longsheet glass consisting of 5.5mm thick sheet glass fixed with necessary aluminium beading and complete all as specified and as directed.
Taking down chowkats or frames exc 1.5 Sqm each but not exc. 4 sqm each including holes for taking out hold fasts or dismantling brick work for holes (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and directed.
Taking down chowkats or frames n. exc 1.5 Sqm each including holes for taking out hold fasts or dismantling brick work for holes (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and directed.
S & F anodised aluminium powder coating frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
S & F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
S&F aluminum alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples complete all as specified and as directed.
M&L for sheet glass 4 mm thick ordinary quality for glazing for windows in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.
Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.
Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.
M & L Second class hard-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed as specified as directed by Engr-in-Charge.
S & F 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidesif one face is covered with deco rative face veneer with lipping/frame to match
Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) skeleton shutters door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturerand as per directions of Engineer- in-charge.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.
M&L rendering 15mm thick in CM 1:6 on fair faces of brick/concrete walls, finished even and smooth without using extra cement all as specified and as directed.
M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 in two layers (10 +5) second layer of 5mm mixed with WPC as per manufacturer's instructions and finished even and smooth without using extra cement complete all as specified. Note : WPC will be measured and paid for separately
Supply only liquid water proofing compound as per latest IS specification complete all as specified.
M&L for rendering 5 mm thick in CM 1:3 as in ceiling finished even and smooth without using extra cement all as specified and as directed.
M&L for preparation of new plastered surfaces on ceiling and applying three coats of white wash etc over a coat of 3mm wall care putty complete all as specified and directed
M&L for preparation of old surfaces and removing of existing treatment surfaces on ceiling and applying two coats of white wash over a coat of 3mm wall care putty etc complete all as specified and directed
M & L preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer including 3mm wall care putty complete all as specified and as directed.
M & L preparation of old plastered surfaces, washing, rubbing down and stopping of distempered and painted surface and complete removal of existing treatment of wall including priming plastered and other surface with alkali resistant priming paint and applying two coats of oil bound distemper over a coat of 3mm wall care putty complete all as specified and as directed.
M&L applying two coats of weather coat on old / new plastered surfaces of wall Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces directed by Engr-in-Charge.
M & L mild steel hold fast clamps or similar small articales confirming to Fe 410 or Fe-310- complete all as specified and as directed.
M &L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping/bed block complete all as specified and as directed.
S& F Aluminium anodised, butt hinges of size 100 mm.all as specified and as directed.
S&F Aluminium anodised, barrel tower bolts of extruded section and fixed,200 mm long.all as specified and as directed.
S&F Extruded aluminium alloy handles, fabricated type anodised 150 mm long all as specified and as directed.
S & F 300 mm size, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
M & L preparation of new wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.
S&F Plates(Plain or chequerred) channels,square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment of Fe- 290 (Gde E- 165) all as specified and as directed.
S&F Compound girders and stanchions,lattice girders,aerial masts, staging for water tanks and the like including caps,bases,splices etc built up from two or more beam or channel sections or abngles with plates including all lattice bars,stiffeners, gusset plates etc of Fe-290 (Gde E- 165) all as specified and as directed.
Supply and fixing Rolled sections as in main and cross beams,hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Fe-290 (Gde E- 165) all as specified and as directed.
S&F 0.71mm thick aluminium alloy colour coated roofing sheets of alloy is designation 31500 temper H*8 confirming to is 737 and dimension as per is code 2676 with charectristics of good formability and corrosion resistance and troughed profile with center to center pitch of 200mm depth of 32mm overall profile width 1092mm cover wiodth 1000mm at all heights levels and locations. the profile sheets shall be fixed to truss members in slope or required pitch or curvature with hex cap headed self drilling /tapping stainless steel screws m6 60mm long with 3mm epdm gasket seal washer etc all inclusive of labouer scaffoldong t7p and sundries all as specified and as directed.
S&F 0.71mm thick Providing and fixing 0.71 mm thick Precoated colour or mill finish Aluminium Ridges plain (500-600mm) of alloy IS designation 31500, Aluminium Alloy (AA) 3004 (ISO designation). For colour, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/ tapping SS screws of size M6, 60 mm long with 3 mm EPDM seal and SS plain washer all as specified and as directed.
M & L preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of primer all as specified and as directed.
S&F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long and dia of neck Exc 12, n.exc 20mm approximately length 60cm all as specified and as directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.
S &F Anodised aluminium snap grid of Size of grid 605 x 605mm frame work for false ceiling all as specified and as directed.
M&L Hangars 6mm dia (upto 1200mm length) adjusting level fixed to frames by means of ceiling cleats made out of GI flat 40x3mm size 60cm long and expansion hold fasterners 1 complete suitable to as in steel truss roofing members/purlins all as specified and as directed.
M & L Providing and fixing 10mm thick plaster of paris ( POP) ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) all as specified and as directed.
S&F Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including 02 coats of OBD over Gypsum board completeall as specified and as directed.
S&F in repair vitreous china wash basin, white flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand incl 15mm bore, pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated. PVC connection 15mm dia 45cm long and 32mm dia PVC waste pipe and CP coupling complete all as specified and as directed.
S&F in repairs 15 mm bore, fancy type chromium Stop valves, angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed plated cast copper alloy screwed down, high pressure with crutch and screwed both ends for iron pipe or for unions complete all as specified and as directed.
S & F in repair 15 mm chromium plated fancy bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipesor for brass ferrule and fixed comlete all as specified and as directed.
M&L for cutting chases, for concealed water tubing and making good, cutting not exc 10 cm girth in CM 1:3 complete all as specified & as directed.
S & F in repair brass chromimum plated shower rose of size 125mm with or without swivel joints including fixing with 15mm bore pipe complete all as specified and as directed.
S & F in repair 15mm bore fancy type stop valve long neck cast copper alloy screwed down high pressure with capston head handle chromium plated conceled type screwed both end for iron pipe or for unin complete all as specified and as directed.
S & F in repairs Pillar taps fancy type 15 mm bore cast copper alloy, with capstain heads, chromium platedscrewed down high pressure, with or without lettered "Hot" of "Cold" with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S & F in repair PVC (SWR) floor trap plain with greating including jointing with solvent cement & fixed of 75 mm dia out let complete all as specified and as directed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), pedestal pan and trap, including connection to drain or out going pipe and to flushpipe, antisyphonage pipe, etc all as specified and as directed.
S&F in repairs PVC valveless syphonic action type, flushing cistern of 10 litres capacity high 0r low level with all accessories incl PVC connection 15mm dia 45cm long all as specified and as directed.
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect all as specified and as directed.
S & F in repair brass CP tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S & F in repair PVC (SWR) pipes single socketed in any length with rubber ringh joint fixed to wall of 110 mm dia bore complete all as specified and as directed.
S & F in repairs PVC (SWR) bend of 110mm radius coplete all as specified and as directed.
S &F in repair 110mm PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed.
S & F in repairs PVC (SWR) vent cowl of 110mm bore all as specified and as directed.
S & F in repair PVC (SWR) pipes single socketed in any length with rubber ringh joint fixed to wall of 75mm dia bore complete all as specified and as directed.
S & F in repairs PVC (SWR) bend of 75mm radius coplete all as specified.all as specified and as directed.
S &F in repair 75 mm PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed.
S &F in repair 110mm PVC (SWR) junction single, (single Y) equal or unequal with access door complete all as specified and as directed.
S &F in repair 75mm PVC (SWR) junction single, (single Y) equal or unequal with access door complete all as specified and as directed.
Taking up or down steel GI/CPVC tubing and connections, including cleaning for refixing removal to store bore of pipe 15mm or 20mm.
S & F 20mm bore steel tube medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and as directed.
S & F 15mm bore steel tube medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and as directed.
Dismanting of exc 500 ltr water tank complete all as specified.
S&F 1000 Ltr capacity rotational moulded polythylene water storage tank (multi layers cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.
S&F, 20mm ball valves high pressure of PTMT witth epoxy coated Aluminium rod& high-density plastic ball srewed for iron pipe and fixed (minimum weight 15mm-142gms/20mm-210gms/25mm-455gms/40mm-690 gms) all as specified and as directed.
S & F gun metal gate valve 20mm dia with iron wheel head screwed both ends for iron pipe all as specified and as directed.
S & F gun metal gate valve 15mm dia with iron wheel head screwed both ends for iron pipe all as specified and as directed.
S&F low density polyethylene pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to walls and ceilings or laid in floors, 50 mm bore, including taking down of old GI tubing 40mm bore all as specified and as directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S & F in repair stainless steel plate rack of size 31 " x 36 " x 10" in repair complete all as specified and as dirrected (Model : KPR -315 of M/S Blue Star or equivalent make- of M/S Jain Brothers sanitation Pvt Ltd Brand -Jayna, Nirali,Prayag)
Demolition of cement concrete of any description and in any position not otherwise specifically provided as in sunken floor for complete all as specified and directed.
M & L Cement concrete in sunkun floor type E-2 1:5:10 (40 mm graded), filling and mass concrete all as specified as directed.
M & L Cement concrete 25 mm thick type B-0, 1:2:4 (12.5mm graded aggregate) all as specified as directed.
M & L 15mm thick rendring in cement mortar 1:3 on fair faces of brick/floor or concrete surfaces finished ceven and soomth without using extra cement and using with water proofing compound complete all as specified and directed.
M & L for applying evenly a tack coat of industrial bitumen 85/25 at the rate 12 Kg per Sqm incl cleaning surfaces complete and as directed by the Engr-in Charge
Taking down the existing roof treatment over roof/Mangalore tiles/Parapet/gutters such as tar felt /Cement plaster /Concrete and removing the rubbish to adistance exceeding 200 mtrs and not exc 500 mtrs as directed.
M & L for water proofing treatment to RCC roof slab incl parapet comprising with the following course of treatment/specifications from bottom to top :- (a) Applying bituminous primer @ 100 grm per Sqm over 25mm thick PCC1:2:4 type B0 including plastered surfaces of roof incl parapet surfaces. (Make : Tank Mastic of STP Ltd or EMUFALTE of Texsa India Ltd/IWL India Ltd) (b) One layer of APP based polymeric membrane of approved manufacturer,3-4mm thick, weight not less than 3.60 kgs per sqm, reinforced with non woven polyester fabric or weight not less than 150 grm per sqm. Polymeric membrane shall taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note: (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions. (ii) A minimum overlap of 100mm and 75mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions. (iii) The make of polymeric membrane shall be SUPER THERMOLY of STP Ltd or MOPLY FP of Texsa India Ltd./IWL India Ltd) (c) Applying two coats of bituminous aluminum paint on top of APP membrane.
Demolation of cement concrete reinforced as in manhole covers etc
M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces all as specified and as directed.
S&F TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
S&F in repairs decorative curtain rod with and including brackets, stops and rollers 25 mm dia all as specified and directed.
M & L cement concrete in foundations, filling and mass-concrete type C2- 1:3:6 (40mm graded aggregate) all as specified and as directed.
Formwork to sides for fair surfaces of pillars, post, struts, piers, coloumns and stanchions for square, rectangular or polygonal surface complete all as specified and as directed.
S & F, wind ties for roof including securingwith `J` bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.
Dismantling structural steel work including doors, Window grill, gates but excluding framed truss etc.
S& F for stainless steel letter of size 8" X8" inserted on wall complete all as specified and as directed.
S & F for stainless steel logo of coast guard of size 10"X10" inserted on wall complete all as specified.all as specified and as directed.
M & L surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft /loose soil complete all as specified and as directed.
M & L sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.
S & F machine pressed pre cast concrete inter locking paver block any shade & size with grey cement and pigment confirming to IS 15658-2006 of 80mm thickness of M35 grade complete all as specified and as directed. .
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft disintegrated rock all as specified as directed.
M & L Cement concrete type D-2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete all as specified as directed.
M&L Pre-cast cement concrete block Type C1 1:3:6 20mm aggregate masonry with solid blocks, exc. 10 cm in width and setting in mortar1:6, complete all as specified and as directed.
Removing excavated soil not exceeding 50m and depositing where directed to a level n exc 1.50M above the starting point in rocks all as specified and as directed.
M&LMaterial & Labour for providing and fixing stainless steel (Grade 316) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified as directed by Engr-in- Charge.
S&F 12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. as directed by Engr-in- Charge.
S & F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.
M &L Aluminium (Diecast) body door closer hydraulically regulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and as directed.
Supply and fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed as directed by Engr-in- Charge.
S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and as directed.
INTERNAL ELECTRIFICATION: Taking down carefully old existing batten/ PVC casing capping (or) conduit point aluminium/copper wiring i.e light, fan, Bell, socket including batten/ casing/ conduit,switch boards, laminated sheets, round blocks, MS Sunken boxes, light fittings/holders of any type, other fittings & fixtures and making good the disturbed surfaces, walls, floors and stair cases complete all as specified & directed.
Taking down old aluminium sub main wiring of any type and capacity incl. all accessories and all as directed. Note : (i) Old dismanteled wiring and accessaries will be contractors property and credit will be charged against schedule of credit.
Taking down old unserviceable distribution board of any size and any capacity complete all as specified and directed.
Taking down existing electric energy meter upto 100 Amps , removing meters to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc complete all as specified and directed .
Taking down fan, sealing cable end, dismantling blades and removing fan and blades and depositing to MES store complete all as specified and directed.
Taking down exhaust fan louver shutter of any size and making good the disturbed surfaces and walls complete all as specified.
M&L Point wiring complete with 1100volt grade PVC insulated unsheathed multistranded 1.5 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC conduit medium grade of suitable size concealed in wall including provision of 1.5 sqmm PVC unsheathed copper conductor and connected to earth dolly, including provision of modular metal fush box module include modular white cover plate with frame top cover for housing switches sockets etc concealed on wall complete all as specified and directed for the following:-
(a) One light point controlled by one way switch 5/6 Amp
(b) One fan/exhaust point controlled by one way switch 5/6 Amp
(c) One socket point 6 Pin 5/6 Amp on same board
(d) One socket point 6 pin, 5/6 Amp on Independent board
(e) One bell / puzzer point controlled by one push button on the same board with other switches or independent.
(f) One light point controlled by two 2 - way switch for stair case
All as per item No 142.0 above but with PVC FRLS insulated unsheathed multi stranded copper conductor of size 4 sqmm, 1100V grade for 6 pin 6/16Amps switch socket on independent board with PVC FRLS insulated unsheathed copper conductor of size 4 sqmm using as earth continuity wire and connected to common earth dolly complete all as specified and directed.
S & F Modular switch 1 way 6A, 1 module complete all as specified and directed.
S & F Modular switch 2 way 6A, 1 module complete all as specified and directed.
S & F Modular socket 6A -2/3 pin combined 2 module complete all as specified and directed.
S&F modular switch socket combination16 A, 6 pin, 3 module complete all as specified and directed
S & F Modular Bell push 6A 1 module complete all as specified and directed.
S & F modular electronic fan regulator complete all as specified and directed.
S&F blank modular blank plate complete all as specified and directed
M&L ceiling rose 3 treminals/ PVC polycarbonate isolated body size(65x50)mm surface type, 230V complete all as specified and directed.Make:- Anchor/ Cona
M&L Bell Buzzer, Ding Dong AC 230 volts, single pole complete all as specified and directed.Make:- Anchor/ Cona
S & F LED tube light fitting 1 x 18 W, 230V wall mounted integrated batten, 4 ft LED module fixed on wall/surface/ceiling shall confirm to IS 16103 and shall bear BIS certification marking complete with all accessories internally pre- wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed.
S& F LED tube light fitting 1 x 9 W, 230V wall mounted integrated batten 2 ft LED module fixed on wall / surface / ceiling shall confirm to IS 16103 and shall BIS certification marking complete will all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed.
S&F Decorative indoor wall mounted light fitting with LED bulb 15 watts, 230 volt decorative indoor wall light mounting type with multicolour ABS housing with poly carbonate rings, and glass shade with lamp holders, connector block, etc.complete with all accessories prewired and including provision of three core flexible copper wire of size 23/0.0076 and connecting up from ceiling rose to light fitting complete in all respect all as specified and directed.
S&F LED light fitting size 2'X2' 42 watts, 230 volt Downlight recessed type with ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Grid ceiling etc.complete with all accessories prewired and including provision of three core flexible copper wire of size 23/0.0076 and connecting to light fitting complete in all respect all as specified and directed.
S&F LED light fitting size 1'X2' 28 watts, 230 volt Downlight recessed type with ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Grid ceiling etc. complete with all accessories prewired and including provision of three core flexible copper wire of size 23/0.0076 and connecting to light fitting complete in all respect all as specified and directed.
S&F LED light fitting size 15 watts, 230 volt Downlighter recessed type with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver etc. complete with all accessories prewired and including provision of three core flexible copper wire of size 23/0.0076 and connecting to light fitting complete in all respect all as specified and directed.
Supply and fix LED security light 35W with IP 65 protection including GI pipe bracket fittings, bolts, clamps and nuts complete all as specified and directed.
S & F Energy meter box (suitable for not less than 690x650x244mm) made of high quality poly carbonate shock proof rust free corrosion free acid & chemical resistant having high impact, UV resistant having high grade gasket made of poly urethane should withstand glow wire test at 960 centigrade, IP 65 (EN 60529) suitable for wall mounting including terminal block, provide seperation sheet for meter & MCB segregation as required all as directed. Suitable for mounting 3 phase, KWH meter - 06 Nos. and suitable mounting arrangement, cable entry holes, earth thimbles, single hinged from door with locking arrangement. Angle iron 40 x 40 x 6 mm (NOTE- Meter box should hold type test certificate approved by CPRI as per IEC 60439-1 with all type certificate) Make- HENSEL/EMITTER
Supply and fix exhaust fan steel body 450mm sweep, 1400 RPM suitable for working on 230V, 50Hz, AC, SPN supply complete with louvers & frame fixed with suitable size GI bolts, nuts and washers duly grouted and connecting up with 0.75Sq.mm size 3 core PVC insulated flexible cable with multistranded copper conductor from ceiling rose to connector of exhaust fan complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic 250mm sweep, 1400 RPM suitable for working on 230V, 50Hz, AC, SPN supply complete with louvers & frame fixed with suitable size GI bolts, nuts and washers duly grouted and connecting up with 0.75Sq.mm size 3 core PVC insulated flexible cable with multistranded copper conductor from ceiling rose to connector of exhaust fan complete all as specified and directed.
Fixing only and connecting electric meters upto 100 Amps of any size after dusting, cleaning complete all as specified and directed.
M&L painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified.
Fixing/Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
Fixing only and connecting electric geyser of any capacity complete all as specified and directed.
M&L MCB distribution board, double door CRCA steel sheet enclosure powder coated, SPN 8 Way as in replacement with 200 Amp rated bus bar complete all as specified and directed..Make:- Indoasian/ Standard
M&L MCB distribution board, double door CRCA steel sheet enclosure powder coated, TPN 8 Way, 415 volts with 200 Amp rated bus bar complete all as specified.all as specified and directed.
M&L MCB distribution board, double door CRCA steel sheet enclosure powder coated, TPN 6 Way, 415 volts with 200 Amp rated bus bar complete all as specified and directed.
M&L MCB distribution board, double door CRCA steel sheet enclosure powder coated, TPN 4 Way, 415 volts with 200 Amp rated bus bar complete all as specified and directed.
S&F MCCB 4 Pole 415, thermal magnetic release, 100 Amps with breaking capacity 16 KA complete all as specified and directed
M&L MCCB 4P 25A, 415 Volt as in replacement complete all as specified and directed..Make:- Indoasian/ Standard/C&S.
M&L MCCB 4P 16A, 415 Volt as in replacement complete all as specified.Make:- Indoasian/ Standard/C&S.
M&L MCB 3P 6-32A, 415 Volt as in replacement complete all as specified.Make:- Indoasian/ Standard/C&S.
M&L for MCB SPN 40 Amp,240 Volt as in replacement complete all as specified. Make:- Indoasian/ Standard
M&L MCB SP 6-32A,240 Volt as in replacement complete all as specified.Make:- Indoasian/ Standard
M&L sub main wiring as of PVC FRLS insulated unsheathed four run of 6.00 sqmm copper multi stranded conductor including two run of single core copper conductor of size 6 sqmm as earth wire drawing with concealed PVC conduit complete all as specified and directed.
M&L sub main wiring as of PVC FRLS insulated unsheathed two single core 6.00 sqmm copper multi stranded conductor including one run of single core copper conductor of size 6 sqmm as earth wire drawing with concealed PVC conduit complete all as specified and directed.
M&L sub main wiring as of PVC FRLS insulated unsheathed two single core 4.00 sqmm copper multi stranded conductor including one run of single core copper conductor of size 4 sqmm as earth wire drawing with concealed PVC conduit complete all as specified and directed.
Taking down only Spilt AC Unit wall mounted, high wall Split units indoor/outdoor complete of capasity 1.5/2 ton with voltage stablizer complete all as specified and directed.
Fixing only Spilt AC Unit wall mounted, high wall Split units indoor/outdoor complete of capasity 1.5/2 ton with voltage stablizer complete all as directed.
S&F sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.
M & L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx60cm thick buried directly in ground(earth) pit not less than 2.25 meter deep below normal ground level) with top edge of earth plate not less than 1.5mtr below normal ground level connected to galvanized iron or wire of size 4mm earthing lead by means of bolts, nuts check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Pt-I connected earthing test point/panel all as specified including GI PCC earth chamber using PCC(1:3:6) Type C-2 using, graded stone aggregate, 50mm thick cast iron frame, precast RCC cover stab using 1:2:4 cement concrete type B-1 reinforced with 8mm dia TMT bars @ 15cm both ways and suitable handle of 10mm round bar, funnel and wire in esh excavation and earth work complete all as specified and directed.
the bhimani group of companies
M/S P S BABU
M/S DUBAL CONSTRUCTION
pk Enterprises
M/S J J ENTERPRISES
SOOD ASSOCIATES PVT LTD
M/s J.D. DESAI
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .