REPAIR AND MAINTENANCE OF WOODEN AND STEEL FURNITURE INCLUDING POLISHING AND PAINTING FOR JAK LI RC SRINAGAR UNDER GE 970 EWS

Amount

Handle steel chromium plated size 100mm long with 25mm long steel pin to make 3 way locking system fully operational including removing of unserviceable handle steel from Almirah steel of any size or type complete all as per drawing and directed. Drawing No (FD-67/1031/1032).

Three way locking device to making the system fully operational including removing of unserviceable locking system of Almirah large steel complete all as per drawing and directed. Drawing No (FD-67/1031)

Description all as per item Ser No 2 above but for Almirah Medium steel. Drawing No (FD-67/1032).

Lock six livers, brass of Godrej pattten, with duplicate keys and including removing unserviceable lock from Almirah steel of any size or type complete all as per drawing and directed. Drawing No (FD-67/1031/1032).

Clips for fixing of shelves, including removing unserviceable clips from Almirah steel of any size or type complete all as per drawing and directed. Drawing No (FD-67/1031/1032).

Leg of 20 Gauge PBI sheet of existing size and shape including applying a coat of red oxide primer and including removing of unserviceable leg from existing Almirah Steel large complete all as per drawing and directed. Drawing No (FD-67/1031) Note : Fixing of new leg shall be done with gas welding.

Description all as per item Ser No 6 above but for Almirah Medium steel. Drawing No (FD-67/1032)

Shelves of MS sheet 1.00 mm thick of existing size and shape including applying a coat of red oxide primer and including removing of unserviceable shelves from Almirah Steel large complete all as per drawing and directed. Drawing No (FD-67/1031).

Description all as per item Ser No 8 above but for Almirah Medium steel. Drawing No(FD-67/1032)

M&L for removing dents from Almirah large steel and smoothening the surfaces with putty and applying one coat of synthetic enamel paint olive green (internally & externally) with spray gun complete all as per drawing and directed. Drawing No (FD-67/1031).

Description all as per item Ser No 10 above but for Almirah Medium steel. Drawing No (FD-67/1032)

New commercial plywood top 12mm thick grade BWR commercial ISI marked of approved make 12 mm thick of size 1980mm x 900 mm and fixing with nut and bolt including cutting / welding the stiffener/change of elbow & check nut of appropriate size and tightening of frame or as per ground requirement including removing of old unserviceable plywood top from charpoy GI pipe complete all as per drawing and directed. Drawing No ( FD-220)

New long rail 32mm dia medium grade ISI marked with both ends threaded including removing of unserviceable broken long rails from Charpoy GI pipe complete all as per drawing and directed. Drawing No ( FD-220)

M&L for removing of unserviceable short rail from Charpoy GI pipe and cutting existing unserviceable long rails retrieved out from Sr No 13 above and converting in to short rails as per existing pattern/design duly threaded at both ends and fixing the same after taking out old unserviceable short rails complete all as per drawing and directed. Drawing No ( FD-220)

M&L for removing of unserviceable leg from Charpoy GI pipe and fixing leg retrieved out of unserviceable short rail as Srl 14 above. Bottom of legs shall be plugged/welded with 5mm thick MS plate matching with the existing shape & size complete all as per drawing and directed. Drawing No ( FD-220)

GI 3 way elbow 32mm dia ISI marked matching with the existing shape & size as per shown in drawing including removing of unserviceable elbow from Charpoy GI pipe complete all as per drawing and directed. Drawing No ( FD-220)

Check nut 6mm thick 32mm bore matching with the existing shape & size as shown in drawing including removing of unserviceable GI check nut from Charpoy GI pipe complete all as per drawing and directed. Drawing No ( FD-220)

New seat made out of 1st class sheesham wood duly caned of size 2 to 2.5 mm as per Godrej pattern, complete as per drawing including removing of old unserviceable seat of chair CB steel with arms complete all as per drawing and directed. Drawing No (FD-75M)

Description all as per item Ser No 18 above but back of chair CB steel with arms. Drawing No (FD-75M)

New arms made out of 1st class sheesham wood duly french polished complete as per drawing including removing old unserviceable arms of chair CB steel with arms complete all as per drawing and directed. Drawing No (FD-75M)

New seat made out of 1st class sheesham wood duly caned as per Godrej pattern, complete as per drawing including removing of old unserviceable seat of chair CB steel without arms complete all as per drawing and directed. Drawing No (FD-75M)

Description all as per item Ser No 21 above but back of chair CB steel without arms. Drawing No (FD-75M)

New caps and rubber shoes complete set (02 Nos caps and 04 Nos rubber shoes in one chair) including removing of old unserviceable caps and hard rubber shoes from conduit of chair CB steel with or without arms complete all as per drawing and directed. Drawing No (FD-75M)

Mild steel Strip of size 480mmx30mmx4mm thick 2 Nos by welding to the existing frame below the seat of chair CB steel with/without arms including provision of hole of fixing the seat by screwing complete all as per drawing and directed. Drawing No (FD-75M)

Applying one coat of synthetic enamel paint olive green of approved quality to the chair CB steel with arms after completing gas welding work, wherever required complete all as per drawing and directed. Drawing No (FD-75M)

Description all as per item Ser No 25 above but of chair CB steel without arms arms. Drawing No (FD-75M)

New top made out of 18mm thick Preliminated Partical board exterior grade one side teak face and one side white with 4mm thick teak wood beading provided all around the top as per existing shape and size including removing unserviceable Top of table office clerk steel complete all as per drawing and directed. Drawing No (FD-84/1004)

Description all as per item Ser No 27 above but for Table office officer steel. Drawing No (FD-84/1003)

Description all as per item Ser No 27 above but for Table 900 mmx 600mm steel with/without drawers.Drawing No (FD-1007/1008)

New brass lock of standard quality approved by GE including removing existing unserviceable lock of Table office officers/clerk steel complete all as per drawing and directed. Drawing No FD-84/1004)

New drawer made out of 1.00mm thick MS sheet duly painted one coat of synthetic enamel paint olive green over one coat of zinc oxide primer including removing existing unserviceable drawer of Table office officers/clerk steel complete all as per drawing and directed. Drawing No (FD-84/1003/1004)

One coat of synthetic enamel olive green paint after preparing smooth surfaces on table office clerk including neccesary welding work and replace the hard rubber shoes (set of 04 nos.) complete all as per drawing and directed.Drawing No (FD-84/1004)

Description all as per item Ser No 32 above but for Table office officer steel. Drawing No (FD-84/1003)

Description all as per item Ser No 32 above but for Table 900x600mm steel with or without drawers. Drawing No (FD-1008)

Seat of CB steel chair with hand rest made of first class (hard wood) shesham wood duly french polished and caned with plastic cane of size 2 to 2.5mm of best quality in godrej pattern complete including removing existing unserviceable complete all as per drawing and directed. Drawing No (FD-120M)

Description all as per item Ser No 35 above but back of Chair CB Steel with hand rest. Drawing No (FD-120M)

Hand board of CB Steel Chair with hand rest made of 18 mm thick pre laminated particle board exterior grade with PVC edging (Hinged on RHS) including removing existing unserviceable complete all as per drawing and directed. Drawing No (FD-120M)

Painting with one coat of synthitic enamel olive green colour paint 1st quality including preparation of surface of Chair CB Steel with hand rest/handle including neccesary welding work and replace the hard rubber shoes (set of 04 nos.) complete all as per drawing and directed. Drawing No (FD-120M)

M&L for denting and painting to trestle store room steel after duly preparation of surfaces with emery paper and putty and applied one coat of synthetic enamel paint olive green colour after necessary welding work wherever required complete all as per drawing and directed. Drawing No (FD-88/1043)

Description all as per item Ser No 39 above but for Rack steel 1830mmx760mmx1905mm. Drawing No ( FD-129/1038)

Description all as per item Ser No 39 above but for Stool steel 3' high. Drawing No (FD-81M)

Description all as per item Ser No 39 above but for Stool steel 2' high and size 305mmx305mmx 510mm. Drawing No (FD-81M)

Front leg made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable leg from chair dining complete all as per drawing and directed. Drawing No (FD-279)

Rear leg made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable leg from chair dining complete all as per drawing and directed. Drawing No (FD-279)

Stiffener (Top/bottom/centre) made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable stiffener from chair dining complete all as per drawing and directed. Drawing No (FD-279)

Seating frame member (front/back/sides) made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable member of chair dining complete all as per drawing and directed. Drawing No (FD-279)

Front leg made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable leg from Chair writing complete all as per drawing and directed. Drawing No (FD-280)

Rear leg made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable leg from Chair writing complete all as per drawing and directed. Drawing No (FD-280)

Stiffener (Top/bottom/centre) made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable stiffener from Chair writing complete all as per drawing and directed. Drawing No (FD-280)

Seating frame member (front/back/sides) made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable member of Chair writing complete all as per drawing and directed. Drawing No (FD-280)

Arms made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable arm of chair writing complete all as per drawing and directed. Drawing No (FD-280)

Front leg made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable leg from Chair easy complete all as per drawing and directed. Drawing No (FD-229)

Rear leg made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable leg from Chair easy complete all as per drawing and directed. Drawing No (FD-229)

Stiffener (Top/bottom/centre) made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable stiffener from Chair easy complete all as per drawing and directed. Drawing No (FD-229)

Seating frame member (front/back/sides) made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable member of Chair easy complete all as per drawing and directed. Drawing No (FD-229)

Arms made out of 1st class seasoned teak wood match with the existing shape & size including removing of old unserviceable arm of Chair easy complete all as per drawing and directed. Drawing No (FD-229)

Ply wood, grade BWR, 4 mm thick one side teak face termite proof ISI Marked as per existing shape and size and beading of teak wood over the head rest including removing of old unserviceable ply wood head rest of Bed ply top complete all as per drawing and directed. Drawing No (FD-246)

Description all as per item Ser No 57 above but foot rest of bed ply top. Drawing No (FD-246)

Long rail of Bed ply wood top Ist class seasoned teak wood match with the existing shape & size as shown on drawing duly polished by two coats of synthetic enamel paint over a coat of wood primer including removing old unserviceable long rail from Bed hard with ply top complete all as specified and directed. Drawing No (FD-246)

Description all as per item Ser No 59 above but leg of head rest of bed hard with ply top. Drawing No (FD-246)

Description all as per item Ser No 59 above but leg of foot rest of bed hard with ply top. Drawing No (FD-246)

12mm thick ply wood grade BWR, termite proof as per existing shape and size including removing old unserviceable ply from Bed hard with ply wood top complete all as per drawing and directed. Drawing No (FD-246)

New top of table size 900mmx600mm with or without drawers made out of 18 mm thick prelaminated particle board exterior grade and 4 mm thick teak wood beading provided all-around the top as per existing shape and size including removing old unserviceable complete all as per drawing and directed. (FD-42/283/284)

New leg of table size 900mmx600mm with or without drawers made out of well seasoned 1st class seasoned teak wood match with the existing shape & size, applied two or more coat of French polish after preparation of surface including removing existing unserviceable leg complete all as per drawing and directed. Drawing No (FD-42/283/284)

Description all as per item Ser No 64 above but long rails of Table 900mmx600mm with or without drawers. Drawing No (FD-42/283/284)

Description all as per item Ser No 64 above but Short rails of Table 900mmx600mm with or without drawers. Drawing No (FD-42/283/284)

Description all as per item Ser No 64 above but long stiffeners of Table 900mmx600mm with or without drawers. Drawing No (FD-42/283/284)

Description all as per item Ser No 64 above but Short stiffeners of Table 900mmx600mm with or without drawers. Drawing No (FD-42/283/284)

New drawers of table 900x600 mm with drawer made of 12mm thick teak wood except bottom of drawers which shall be of 6mm thick ply wood commercial ISI Marked match with the existing shape & size, knob shall be provided CP 32mm including Removing existing unserviceable drawer all as specified and directed. Drawing No (FD-42/283/284)

New top of table peg made out of 18 mm thick prelaminated particle board exterior grade and 4 mm thick teak wood beading provided all-around the top as per existing shape and size including removing old unserviceable complete all as per drawing and. Drawing No (FD-25/236/277)

New leg of table Peg made out of well seasoned 1st class seasoned teak wood match with the existing shape & size, applied two or more coat of French polish after preparation of surface including removing existing unserviceable leg complete all as per drawing and directed. Drawing No (FD-25/236/277)

Description all as per item Ser No 71 above but long rails of Table Peg. Drawing No (FD-25/236/277)

Description all as per item Ser No 71 above but Short rails of Table Peg. Drawing No (FD-25/236/277)

New top of teapoy made out of 18 mm thick prelaminated particle board exterior grade and 4 mm thick teak wood beading provided all-around the top as per existing shape and size including removing old unserviceable complete all as per drawing and directed. Drawing No (FD-23/278)

New leg of teapoy made out of well seasoned 1st class seasoned teak wood match with the existing shape & size, applied two or more coat of French polish after preparation of surface including removing existing unserviceable leg complete all as per drawing and directed. Drawing No ( FD-23/278)

Description all as per item Ser No 75 above but long rails of Teapoy. Drawing No (FD-23/278)

Description all as per item Ser No 75 above but Short rails of Teapoy. Drawing No (FD-23/278)

New top of table dining 6 persons made out of 18 mm thick prelaminated particle board exterior grade and 4 mm thick teak wood beading provided all-around the top as per existing shape and size including removing old unserviceable complete all as per drawing and directed. Drawing No (FD-30/239/273)

New leg of Table dining 6 persons made out of well seasoned 1st class seasoned teak wood match with the existing shape & size, applied two or more coat of French polish after preparation of surface including removing existing unserviceable leg complete all as per drawing and directed. (FD-30/2239/273)

Description all as per item Ser No 79 above but long rails of Table dining 6 persons. Drawing No (FD-30/239/273)

Description all as per item Ser No 79 above but Short rails of Table dining 6 persons. Drawing No (FD-30/239/273)

Recanning with new plastic cane 2mm half round gola type of best quality as per Godrej pattern duly approved by GE and 3mm half round gola type for border around the seat in white colour including tightining the frame with bambu pin/fivecol and removing of existing old unserviceable cane from Chair dining complete all as per drawing and directed. Drawing No (FD-16/228/279)

Description all as per item Ser No 82 above but for Chair writing. Drawing No (FD-20/203/280)

Description all as per item Ser No 82 above but for Chair Easy. Drawing No (FD-17/229)

Recanning Chair verandah with new plastic cane 4mm wide half round of best quality (Mat pattern as per Trade Pattern) duly approved in white colour including removing of old unserviceable cane/newar complete all as per drawing and directed. Drawing No (FD-10/256)

20 mm dia 1.6 mm wall thickness Mild Steel conduit pipe left or right side frame (consisting front & rear leg portion) duly welded to the seat frame of chair verandah, also 10mm dia MS rod in front leg including rubber toes of best quality at the bottom of legs complete all as per drawing and directed. Drawing No (FD-19(M)/256)

New hard rubber shoes (Set of 04 Nos) of approved quality in black colour including removing of old unserviceable rubber shoes of verandah chair complete all as per drawing and directed. Drawing No (FD-19/256)

New tapestrised cushion, complete set of seat and back made of superior quality foam cushion 40 density, 100 mm thick, of size 530mm x 560mm duly covered/stitched on all sides with tapestry cloth of approved shade/texture costing not less than Rs 380/- per meter for Sofa set single seater/ two seater/ three seater/ four seater/ five seater. (One removable cushion for seat and one removable cushion for back) including removing of the existing worn unserviceable tapestrised cushion complete all as per drawing and directed. Drawing No (FD -281)

New tapestry cloth, complete set of seat and back made of superior quality duly covered/stitched on all sides with tapestry cloth of approved shade/texture costing not less than Rs 380/- per meter for Sofa set single seater/ two seater/ three seater/ four seater/ five seater. (One removable cushion for seat and one removable cushion for back) including removing of the existing worn unserviceable tapestry cloth complete all as per drawing and directed. Drawing No (FD -281)

Preparation of old polished wooden surfaces and applying one coat of French polish to get perfect glossy finish to Almirah large with shelves wooden complete all as per drawing and directed. Drawing No (DB-4116/FD-109)

Description all as per item Ser No 90 above but for Almirah Medium with shelves wooden. Drawing No (DB-3959/3050/FD-107)

Description all as per item Ser No 90 above but for Bed hard/Bed newar. Drawing No (FD-245/246)

Description all as per item Ser No 90 above but for Chair easy. Drawing No (FD-17/229)

Description all as per item Ser No 90 above but for Chair writing. Drawing No (FD-20/203/280)

Description all as per item Ser No 90 above but for Chair Dining. Drawing No (FD-16/228/280)

Description all as per item Ser No 90 above but for Desk. Drawing No (FD-107M)

Description all as per item Ser No 90 above but for Sofa set single seater. Drawing No (FD-281)

Description all as per item Ser No 90 above but for Table 900x600 mm with drawers. Drawing No (FD-284)

Description all as per item Ser No 90 above but for Table 900x600 mm without drawers. Drawing No(FD-283)

Description all as per item Ser No 90 above but for Table dining 6/8 persons. Drawing No (FD-273)

Description all as per item Ser No 90 above but for Table peg. Drawing No (FD-25/236/277)

Description all as per item Ser No 90 above but for Table 60x60cm. Drawing No (FD-291/293)

Description all as per item Ser No 90 above but for Teapoy. Drawing No (FD-278)

Description all as per item Ser No 90 above but for Table writing. Drawing No (FD-275)

Denting and painting to rack steel 1875mm (L)x950mm (W) x500 mm (H) after duly preparation of surfaces with emery paper and putty and applied one coat of synthetic enamel paint olive green colour after necessary welding work wherever required complete all as per drawing and directed. Drawing No (FD-129/1038)

Description all as per item Ser No 105 above but for Side Rack with Trey steel 3 space. Drawing No (FD-1023)

Painting with one coat of synthitic enamel white paint 1st quality including preparation of surface of Chair varandah with hand rest/handle including neccesary welding work and replace the hard rubber shoes (set of 04 nos.) complete all as per drawing and directed. Drawing No (FD-256)

Denting and painting to form with and without Back with black paint after duly preparation of surfaces with emery paper and putty and applied one coat of synthetic enamel paint olive green colour after necessary welding work wherever required complete all as per drawing and directed. Drawing No (FD-77M/FD 1027)

New commercial plywood top 12mm thick grade BWR commercial of size 1980mm x 900 mm and fixing with nut and bolt including cutting / welding the stiffener and angle of size 35x35x5mm and tightening of frame as per ground requirement including removing of old unserviceable GI Elbow & plywood top from Double Bunk Charpoy GI pipe complete all as per drawing and directed. Drawing No ( FD-CESZ/SK-203/91)

New GI pipe long rail 32mm dia medium grade ISI marked with both ends double hole including removing of unserviceable broken long rails from Double Bunk Charpoy GI pipe complete all as per drawing and directed. Drawing No ( FD-CESZ/SK-203/91)

GI elbow 32mm dia ISI marked matching with the existing shape & size as per shown in drawing including removing of unserviceable elbow from Double Bunk Charpoy GI pipe all as specified and directed. Drawing No ( FD-CESZ/SK-203/91)

MS Algle Bracket 35x35x5mm and 100 mm long ISI marked with hole welded to pipe stand matching with the existing shape & size as per shown in drawing. Bracket shall be painted with two coats of black paint over a coat of red oxide primer of Double Bunk Charpoy GI pipe all as specified and directed. Drawing No( FD-CESZ/SK-203/91)

GI nut and bolt with washer counter sunk 10 mm dia for joint MS Algle Bracket 35x35x5mm x100 mm long and long rails matching with the existing shape & size as per shown in drawing of Double Bunk Charpoy GI pipe complete all as specified and directed. Drawing No( FD-CESZ/SK-203/91)

DUKE CONSTRUCTION

M/S MIR AND CO

M/S ABDUL HAMID RATHER

M/S B A Traders

M/s Bashir Enterprises