e-Tender for the work of Construction of Shops at Mohalla No.29 (Outside) Adjacent to Gymnasium Sports Complex alongside Hardyal Road, Jalandhar Cantt

Amount

Excavation in foundation trenches and getting out (Soft/Loose soil)

M&L Cement Concrete in foundations, filling and Concrete (Type E(2) 1:5:10 (40 mm graded aggregates)

M&L Form work of the R.C.C.footings, bases of columns (flat surfaces)

M&L R.C.C. (design mix) footings in foundation M-25 with 20 mm graded aggregates

M&L Form work for the R.C.C. columns square section (with fair finishes)

M&L R.C.C. in columns (design mix) M-25 with 20 mm graded aggregates

M&L Brick-work (1:6) with fly ash bricks in foundation/sub-structure, upto plinth level and in super-structure, straight or curved on plan exc. 6m mean radius (old size bricks)

M&L Form work for the R.C.C. plinth Beams (flat surfaces )

M&L R.C.C. plinth Beams M-25 (design mix with 20mm graded aggregates)

M&L Form work for the R.C.C. lintel Beams (flat surfaces )

M&L R.C.C. lintel Beams M-25 (design mix with 20mm graded aggregates)

M&L Form work for the R.C.C. Down T- Beams (flat surfaces)

M&L R.C.C. down T-beam M-25 (Design mix with 20mm graded aggregates)

M&L Form work for the R.C.C. slabs with fair finishes

M&L R.C.C. slabs supported on walls & columns (Design mix M-25 with 20mm graded aggregates)

M&L Brick-work (1:6) with fly ash bricks in parapets walls

M&L C.Conc. fillets/side kerbs Type(B-0)(1:2:4) with 12.5 mm graded aggregates

M&L Applying evenly a tack coat of Industrial Bitunen 85/25 @1.20kg per sq-m including cleaning surfaces

M&L 80 mm th. Average consolidated thickness mud phuska on flat roofs including 25 mm th. Mud plaster and 3 mm th. leeping plaster

M&L 40 mm th. Brick tiles laid on mud mortar and joint grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska

M&L P.V.C. (R.W.P.) pipes single socketed 150 mm dia.

M&L Rendering (1:3) 05mm th. to the ceiling surfaces are to be finished even and smooth (without using extra cement)

M&L Rendering (1:4) 15mm th. to the vertical surfaces are to be finished even and smooth (without using extra cement) (for external surfaces)

M&L Rendering (1:6) 15mm th. to the vertical surfaces are to be finished even and smooth (without using extra cement) (for internal surfaces)

M&L Steel Rolling shutters, without ball bearings as specified, including top cover, anchoring rod, hasp & staple and one shop coat of primer, erected in position as indicated complete, push,pull or manual type (thickness of lath 1.25 mm th.)

M&L steel ventilators with top hung shutters including hinges, steel peg stay, complete.

M&L sheet glass ordinary quality and glazing with oil putty in square exceeding 0.5 Sq-m in each pane (4.0 mm th.)

M&L Earth filling to the surfaces including spreading & leveling in layers, ramming including watering as required, forming embankments with lead upto a total distance of 15 k.m.

M&L Cement Concrete in foundations, filling and Concrete (Type E(2) 1:5:10 (40 mm graded aggregates)

M&L C. Concrete (Type B-0) 1:2:4 (12.5 mm graded aggregates)70mm th.

M&L Screed bed (1:4) 25 mm th. For floor and wall surfaces

M&L Glazed coloured ceramic tiles in vertical surfaces 450x350x7mm th. Set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Non-skid coloured ceramic tiles 7 to 8 mm th. (square/rectangular) area of each tiles exceeding 0.11 Sq-m but not exceeding 0.18 Sq-m, in floors surfaces Set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Framed work of grills conforming to Fe-290 Gde-E-165

Returning filling of the soils including spreading, leveling, watering and well ramming in layers n.exc.25 cm

M&L Point wiring for the electrical points in PVC conduits wiring with copper conductor cables one light point or one fan point controlled by one switch with cable 1.50 Sq-mm size

M&L Mild steel bars cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia. or securing with clips (T.M.T. bars) (as per T.D.)

Surface Excavation (n.exc.) 30 cm deep and averaging 15 cm deep and getting out for front inclined ramps and for the side & rear plinth protections ( Hard/dense soils )

Surface Dressing n.exc.15 cm deep

M&L Cement Concrete in foundations, filling and Concrete (Type E(2) 1:5:10 (40 mm graded aggregates)

M&L C. Concrete (Type B-0) 1:2:4 (12.5 mm graded aggregates)70mm th.

M&L Brick-work (1:6) with fly ash bricks in for the inclined ramps

M&L Rendering (1:4) 15mm th. to the inclined ramp surfaces are to be finished even and smooth (without using extra cement

M&L Earth filling to the inclined ramp surfaces including spreading & leveling in layers, ramming including watering as required, forming embankments with lead upto a total distance of 15 k.m.

Sachin Jain

VIPAN JAIN

KALRA CONSTRUCTION CO.