237. Construction of Audito...

Amount

Providing and fixing suspended false ceiling with Knauf Danoline Stratopanel glass fiber reinforced acoustic gypsum baord of Size 1200X2500X12.5mm with round random perforation G8/15/20 with 9.9% perforation and NRC upto 0.55 .Installation includes providing and fixing GI perimeter channels of size 0.55 mm. Thk. having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, screw fixed to brick wall/ partition with help of nylon sleeves and screws, at 610 mm centers. The suspended GI intermediate channels of size 45 mm,0.9mm thk with two flanges of 15 mm each from the soffit at 900 mm centers with ceiling angle of width 25mm x 10mm x 0.55mm thk fixed to soffit with GI cleat and steel expansion fasteners. Ceiling section of 0.55 mm thk having web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are fixed to the intermediate channels with help of connecting clips and in direction perpendicular to the intermediate channel with centers of 333 mm perforated gypboard is then screw fixed to ceiling section with 25 mm dry wall screws at 300 mm centers to G.I. framing in perfect level. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally the boards are to be joined and finished so as to have a flush look with uniflot. Product comes with Cleaneo Technology - Air purification and Air quality.Active reduction of air polluants thanks to Cleaneo Technology effectively reduces concentrations of VOC’s like alcohol, aldehydes, ketons and esters as well as unpleasant odours from e.g. food or cigarette smoke Air purification properties tested according to CEN standards and VDI guidelines by Fraunhof Insistute for Building Physics The false ceiling surfaces shall be prepared to the satisfaction of the Architect, and shall be applied with two coats of primer and Paint to the satisfaction of Architects.`

Providing and laying VDC ( Vaccum Dewatered Concrete) pavement of mix M-30 with minimum cement content 320 Kg/Cum with design mixed concrete from automatic batching plant as per approved and specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. making provision for contraction/ expansion, construction and longitudinal joints (6 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with Polysulphide Pour Grade sealent ( Make SIKA ) including providing 125 micron Polythene sheet ( Transparent) on surface area below the VDC complete as per specifications and directions of Engineer-incharge. (Item of dowel bars / tie bars to be paid separately under item of HSR 6.33.6 ). (Note:- Rate includes all items as mentioned above.)`

Providing and fixing heavy Duty S.S Handle bolt (8` long) with nuts and screws etc complete.

Providing and fixing heavy Duty S.S Handle bolt (18` long) with nuts and screws etc complete.

Providing and fixing heavy Duty S.S Handle bolt (06` long) with nuts and screws etc complete.

Providing and fixing Heavy Duty S.S Sliding bolt (300mm x16 mm dia.) with nuts and screws etc complete

Providing and fixing Heavy Duty S.S Sliding bolt (200mm x 16 mm dia) with nuts and screws etc complete

Providing and fixing galvanized chicken wire mesh (24 gauge 12 mm size) to junctions of concrete and masonry work and other locations including cutting to required sizes, side laps of minimum 75 mm and fixing in position with galvanized iron wire nails, complete.

Providing and fixing of 150 mm floor stainless steel door stoppers, godrej make with rubber cushion screws etc to suit shutter thickness complete.

Plastering on existing AAC block wall 12 mm thick factory prepared Ready Mixed cement based plaster of Unicrete/ Capa I.C / Ultratech make with grade fillers / Portland Cement as per manufacturers specifications complete in all respects

Providing and fixing tiled false ceiling of specified materials of size 600 x 600 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main ``T`` runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross ``T`` of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main ``T`` at 600 mm center to center to form a grid of 1200x600 mm and secondary cross ``T`` of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ``T`` runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-chargeProviding and fixing Knauf Danoline Perforated glass fiber reinforced Gypsum tile Belegravia MICRO with Square perforation of size 3×3 mm with c/c 8.33 mm spacing and size of 12.5mm* 600*600 mm. The reverse of the board incorporates an acoustic fleece which provides sound absorption performance( NRC value 0.60) . Front surface is White acrylic paint, RAL 9003, gloss 5. Product comes with Cleaneo Technology -Active reduction of air polluants due to Cleaneo Technology, effectively reduces concentrations of VOC’s like alcohol, aldehydes, ketons and esters as well as unpleasant odours from e.g. food or cigarette smoke Air purification properties tested according to CEN standards and VDI guidelines by Fraunhof Insistute for Building Physics The false ceiling surfaces shall be prepared to the satisfaction of the Architect`

roviding and fixing of carpet tiles of Yarn type Nylon 6, tuffed textured loop and cut pile with Secondary Backing `Glassbac` which consisits of two layers of thermoplastic recycled content vinyl composite, reinforced with fiberglass for optimum stability and performance. The tiles should be manufactured with 100% solution dyed with antistatic property ( less than 3.5kv) and `Protekt` treatment for stain resistant coating, providing a barrier against permanent stains and also with anti microbial coating i.e. the carpet should be treated with `Intercept` anti microbial process. The size of tiles are 500mm x 500mm or 250mm x 1000mm having tuffed yarn weight of minimum 16 Oz/Yd2 or more, nominal total thickness 5mm minimum, stiches per inch ( 10-13), Smoke Density should be less than 250 as per ASTM E662, Radiant Pannel Test- Class 1 as per ASTM E648, Apperance Retention Rating- Commenrcial severe use and Leed Certification- CRI- Green Lable Plus certification/ Carbon Neutral Floors, Green Pro Type I Ecolabel for carpet tiles by CII-Indian Green Building Council (IGBC) Certification .All certificates to be provided before release of award of contract. The Installation method of tile is with glue and carpet should be covered with one layer of plastic sheet before handover.

Supply and Installation of Fire Resistance Door Size 2150X2400 mm, 46 mm thick Tata steel door shutter of 120 minute fire rated confirming to BS-476, Part 20-22 and lS:3614 part-II, Prototype certified from Govt. approved Lab. GQMC / CBRI Roorkee. fabricated with 2 nos of 0.8 mm thick galvanized steel sheet sandwiching fire insulation materials in between suitable for 120 minute. Door frame are manufactured with 1.2 mm thick galvanized Tata steel sheet pressed to form single rebate profile of size 100X58mm and fixing with dash fastener of approved size including Ball bearing butt hinge of size 1OOX75X3mm with screws in SSS 304 grade, Door Closer, 5mm thick Saint Gobin Fire Rated Vision Panel (Size 300X450 mm), Triple Point Panic Bar, Panic Trim, Fasteners etc. The frame and shutter are finished with powder coated approved shade, including all contingent work there to, complete in all respect upto entire satisfaction of Engineer-in-charge. `

Supply and Installation of Fire Resistance Door Size 1250X2300 mm, 46 mm thick Tata steel door shutter of 120 minute fire rated confirming to BS-476, Part 20-22 and lS:3614 part-II, Prototype certified from Govt. approved Lab. GQMC / CBRI Roorkee. fabricated with 2 nos of 0.8 mm thick galvanized steel sheet sandwiching fire insulation materials in between suitable for 120 minute including Concealed flush Bold 300 mm Ball bearing Butt hinge of size 1OOX75X3mm with screws in SSS 304 grade, Allen Key shaft Lock ,Flush Handle,Fasteners etc . Door frame are manufactured with 1.2 mm thick galvanized Tata steel sheet pressed to form single rebate profile of size 100X58mm and fixing with dash fastener of approved size. The frame and shutter are finished with powder coated approved shade, including all contingent work there to, complete in all respect upto entire satisfaction of Engineer-in-charge.

Providing and Fixing Channeled Woodworks perforated panels of width 128/192mm, thickness of 15mm and length 2400 mm or as required by the Engineer-in-Charge, made of Moisture Resistant fiber board with minimum 595 Kg/M3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be “tongue- and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non- woven acoustical fleece having NRC value not less than 0.7. The panels shall be mounted on special aluminum splines using clips.The panels shall be mounted on special splines of GI steel fixed at the spacing of 600mm centre tocentre and made of aluminium extruded channel size of 15mmx25mmx20mm with the help of clips required size and shape as per manufacturers specification.The thermal insulation shall be provided with Resin Bonded Rockwool confirming to IS 8183 having density of 48kg/m3 x 50mm, wrapped in virgin polythene bags fixed to the wall. Place the inside clip on the groove end of the panel along the Al keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. All complete with necessary synth / glass wool and frame work as per manufacturer specification. (GRIDSQUARE/ARMSTRONG/ANUTONE) `

Providing and supplying Acoustical Wall Paneling with square edges made of rockwool tissue substrate 50mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class BS-476, as per part 4, 20, fabric with an option of colors – Ivory, Autumn Orange, Pista Green, Straw Gold, Rustic Green, Burgundy, Rust, Peacock Blue, Ash Grey, Mocha as per the choice of the Architect of size 600X600 mm providing a minimum sound absorption level of 0.80 NRC to be affixed to wall using Wall panel impalers construction adhesives as per the instructions laid down by the manufacturer. INSTALLATION: 4nos. l panel Impalers of shall be fixed to the wall surface using self tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Wall panels shall be pierced through the spikes of the impalers ensuring the line and level of the panels are maintained(.GRIDSQUARE/ARMSTRONG/ANUTONE)

Providing and fixing thermal bonded non woven polyester wadding of 1000 GSM, 50 mm thick, fixed to flooring, for top most flooring at building all complete as per direction of Engineer-in-charge. Polyester wading shall be fixed properly in such a way to create an appropriate air gap min 300mm with wooden flooring.

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% NOTE-Anti Termite Treatment Work for flooring.

Providing and fixing of staggered layers/Mr Ply 12mm thick MR ply of approved make like century, Duron, Green ply, Merino or equivalent fixed to natural wood frame work of approved size fixed at 300 mm c/c both ways The nature wood framework to be supported cleat pads and held in position by 35x35x5 mm angle cleats of 75mm length at 1200 mm centres. The wooden framework to be filled with 25mm thick thermal bonded polyester wadding micron fiber of 1000 gm/sqm (Make: Mikasha/ Nowofill / Vibrant or equivalent) held in position with 18mm 24 SWG chicken mesh fixed on the bottom of the wooden framework with necessary screws and washers. The cleats to be given two or more coats of zinc chromate primer. The cleat to be prewelded to the and screwed to the wooden framework with necessary screws.The work shall be executed as per drawings, specifications and instructions of engineer in charge.

Supply and fixing Engineered Wood flooring:-The blonde hues found in this 3-strip ash floor from the Nordic Naturals Collection range from amber honey to vanilla cream. To create this lively effect, lighter surface wood has been mixed with darker core wood. Collection-Nordic Naturals CollectionSurface treatment-Matt lacquerConstruction-3-layer parquet Product measurements-200 x 2423 x 15 mm Engineered Wood flooring

Providing and fixing of space framme as per Architecture drawings with structure frame with powder coating. Complete with respect.

Supply and fixing of 50/85 mm continuous line puf roof panel having 0.5mm PPGI sheet outer side and 0.4 mm PPGI sheet inner side of 120gsm, 240MPA on both side,puf infill density 40 plus -2 kg/m3.RAL 9002(trapezoidal outer and inner micro ribbed panel) fix with self teaping screws with bitumen warsher and filling silicon complete all respect.

Providing and fixing of PPGI Flusing

Proving and fixing of PPGI sheet 1 mm rain water gutter 300x600x300 mm with 50x5 mm bracket

Supply and erection of GRC screens( jali) 50 mm thick in approved designs and sizes factory manufactureed containing alkali resistant Glass Fiber of make NEG, Japan and fixing by Dry Cladding using SS Cleats, SS Threading rods , Self Tapping Screws and Fischer make pure epoxy chemical fastner (Em Plus with RGM/ GM 8.8 grade rods ) as per design, complete including scaffolding and all other plants and machinery with all type of labour . ( Unicrete ,Dalal, Unistone,Birla.Shenisha) with entire satisfaction of Engineer in charge. (MS structure paid seperately) (N.S.ITEM)

Providing and fixing steel LED letter in SS -304 garde rust free and in 18 guage thickness with 1.5`/2` raised provided sumsung led module,heavy duty power coated, rain proof/ water proof. Gate-1 Nagar Nigam, Panipat -18` height -17 letters, Gate-2 Nagar Nigam Panipat-18` height-17 letters, Mutliporpose hall -18` height-16 letters,Auditorium -18` Height-10 Letters, Library -18`height-7 letters and Cafteria -18` height-8 letters

SITC of 2 MP Fixed Lens Dome Camera, Image Sensor 1/2.8” 2MP Progressive scan CMOS, Effective Pixels 1920 x 1080, Lens 2.8mm fixed lens, Video Compression H.265: H.264, MJPEG, Resolution 1080P(1920×1080), Ethernet RJ-45 (10/100Base-T), Event Trigger Abnormality detection: Motion detection, video, tempering, SD card full, network disconnected, IP conflict, illegal access, IR Range of 30 Mtr. Micro SD FTP: Micro SD card, Certifications CE, FCC, BIS/UL, ROHS. IP 67. Make : Matrix/Honeywell/Norden

SITC of 2 MP or better VF Bullet Camera, Image Sensor 1/2.8” 2MP Progressive scan CMOS, Effective Pixels (1920 x 10SITC of 2 MP or better VF Bullet Camera, Image Sensor 1/2.8” 2MP Progressive scan CMOS, Effective Pixels (1920 x 1080), Lens 2.8mm to12mm, Video Compression H.265,H.264,MJPEG, Resolution 1920 x 1080, Motion/No Motion Detection, Tamper Detection, Trip/No Trip Detection,Object Intrusion/Zone Intrusion, IP Conflict, Network Disconnect, Storage Full, Time Triggered, Audio Input/Output 1 / 1, Ethernet RJ-45 (10/100Base-T), IR- IR Range of 50M,NAS, SD Card, Certifications CE, FCC, BIS/UL, ROHS. Make : Matrix/Honeywell/Norden 80), Lens 2.8mm to12mm, Video Compression H.265,H.264,MJPEG, Resolution 1920 x 1080, Motion/No Motion Detection, Tamper Detection, Trip/No Trip Detection,Object Intrusion/Zone Intrusion, IP Conflict, Network Disconnect, Storage Full, Time Triggered, Audio Input/Output 1 / 1, Ethernet RJ-45 (10/100Base-T), IR- IR Range of 50M,NAS, SD Card, Certifications CE, FCC, BIS/UL, ROHS. Make : Matrix/Honeywell/Norden

SITC of 2 MP 25X PTZ Camera, Image Sensor 1/2.8” 2MP PS CMOS, Effective Pixels 1920(H) x 1080(V), Resolution 2MP, Focal Length 4.8mm~120mm, Optical Zoom 25x, Manual Speed Pan Manual Speed:0.1°/s-200°/s: `Tilt Manual S, Video Compression H.265/H.264/M-JPEG, Advanced Features Electronic Defog, 4 Pattern, 6 Tour (up to 32 presets per tour), 5 Auto Scan, SMD PLUS Supports, Networking 1 RJ-45 Port 10/100Base-T, IR Range 90 Mtr. Memory Slot FTP: Micro SD card, Power Consumption Basic: 13 W Max.: 25 W, Certifications CE, FCC, BIS/UL, ROHS. Make : Matrix / Honeywell / Norden

SITC of 64 Ch. 4K Network Video Recorder with 8 Sata Ports , Processor Quad-core embedded processor, Operating System Embedded LINUX, User Interface GUI, Video Output 1 HDMI , 2 VGA , Video Resolution HDMI1: 1280x720,1920x1080, 3840x2160`, Channel 64 channel, Hard Disk 8 SATA III ports, up to 10TB Each, 1 eSATA port, Recording Mode Manual, Schedule (Regular, MD (Motion Detection), Alarm, IVS), Stop, Backup Mode, USB Device/Network, Resolution 12MP, 8MP, 6MP, 5MP, 4MP, 3MP, 1080P, 1.3MP, 720P etc. Ethernet 2 RJ-45 port (10/100M/1000Mbps) Independent or Joint Working, Interface Ports 3 USB ports (2 x USB 2.0, 1x USB 3), Certifications CE, FCC, BIS/UL, ROHS. Make : Matrix/Honeywell/Norden

SITC of 10 TB Hard disk Make: WD/Seagate/Toshiba

SITC of Switch should be Web Manged, Should have 8 port 1000BASE-T with 4 Port 1000BASE-T PoE PoE power budget 160 Watt or higher, Maximum Per port PoE Power 30 WattIEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Ethernet,IEEE 802.3ab 1000BASE-T Ethernet, IEEE 802.3az EEE support,IEEE 802.3x flow control,IEEE 802.3z 1000BASE-X,IEEE 802.1p CoS,IEEE 802.3af PoE, IEEE 802.3at PoE Plus, IEEE802.1Q VLAN Tagging, Minimum 8 VLAN supportPort based VLAN, IEEE802.3ad link aggregation should be MAC based Switching Capacity 16 Gbps,Packet buffer 192KB,MAC address support 4K Jumbo frame support 9K, Should support loop detection,Should support Broadcast storm control QoS Support (WRR and strict priority) Port based QoS 20 Multicast group or higher, Maximum power consumption 72W,Operating temperature 0°C to 40°C Storage Temperature -40°C to 70°C Certification: CE, FCC, C-Tick, , LVD EN60950-1, ROHS compliant.Should be built-in IEEE 802.3az Energy Efficient Ethernet (EEE) Make: Cisco/Alied/Juniper/Netgear

SITC of Layer-2 POE plus Gigabit Ethernet 1RU chassis with 24 PoE 10/100/1000 BaseT ports and 4 Gigabit SFP ports. Includes an internal AC power supply 370W atleast or higher power budget) with a power cord, manuals access card, and RJ-45 to DB-9 adaptor.The Access Switch should have 4 ports of 1 G SFP.The Access Switch should provide Non-Blocking switch fabric capacity of 56 Gbps or more. L-2 switch should provide wire-speed packet forwarding of 41 Mpps or more. L-2 Switch should support min 16K MAC addresses and min 4000 active VLANs. Make: Cisco / Alied / Juniper / Netgear.

SITC of Layer-3 POE plus Gigabit Ethernet 1RU chassis with 24 PoE 10/100/1000 BaseT ports and 4 Gigabit SFP ports. Includes an internal AC power supply 370W atleast or higher power budget) with a power cord, manuals access card, and RJ-45 to DB-9 adaptor.The Access Switch should have 4 ports of 1 G SFP.The Access Switch should provide NSITC of Layer-3 POE plus Gigabit Ethernet 1RU chassis with 24 PoE 10/100/1000 BaseT ports and 4 Gigabit SFP ports. Includes an internal AC power supply 370W atleast or higher power budget) with a power cord, manuals access card, and RJ-45 to DB-9 adaptor.The Access Switch should have 4 ports of 1 G SFP.The Access Switch should provide Non-Blocking switch fabric capacity of 56 Gbps or more. L-2 switch should provide wire-speed packet forwarding of 41 Mpps or more. L-2 Switch should support min 16K MAC addresses and min 4000 active VLANs. Make: Cisco / Alied / Juniper / Netgear. on-Blocking switch fabric capacity of 56 Gbps or more. L-2 switch should provide wire-speed packet forwarding of 41 Mpps or more. L-2 Switch should support min 16K MAC addresses and min 4000 active VLANs. Make: Cisco / Alied / Juniper / Netgear.

SITC of 12 Port fiber LIU, Fully loaded which have sufficient slots to accommodate 24/12 Duplex LC/SC Ports ,Should have fiber management provision inside with splice tray and other accessories, Should be rack mountable 1U,Should have Splice holder for minimum 24 Fiber cores ,Should be made of Cold Rolled Steel ,Material Should steel: 1.5 mm with powder-coated. LIU should have rack mount with channel with uppersheet openable for fiber management. Make: RandM/ Siemon/ Systimax.

SITC of 55 Inch , Screen Resolution - 3840 x 2160, Brightness 350cd/m2, 24/7, Inbuilt Memory 16 GB, 2GB DDR3 2133Mhz RAM, Android OS Version 9, Built in Google Play store, Screen Mirroring for Android and Windows devices, preinstalled APPs: YouTube, Netflix, etc. HDMI x 3, USB x 2, RJ45 x 1, AV IN x 1, SPDIF Out - Yes Optical, Headphone out, Viewing Angle 178/178 degree, Sound Surround Mode - Yes, Speaker output - 2 x 10W, Rated Power Consumption 150W, Standby Power Consumption 0.5W, Power Supply AC 110V – 240V. Approved Make Panasonic /Samsung /LG.

SITC of 12 core Single Mode Optical Fiber Cable . Make: RandM / Siemon/ Systimax.

SITC of Single mode SFP-1000-T Base for Fiber connectivity of Same make quoted for switch.

SITC of SC to SC cable. Make: Panduit/ RandM/ Systimax/ Beldon.

SITC of 18U Equipment Rack with provision for housing all control equipment with front and rear door, Blower for cooling and proper locking arrangements and as per the specifications, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: Comrack/ Valrack/ Netrack.

SITC of Wall mount 9U rack 630D With Front Glass Door Lock and Key: with toughened glass: with 1U cable Manager: Fan: 6 socket PDU (550MM x 630MM) Make: Comrack/ Valrack/ Netrack. SITC of Wall mount 9U rack 630D With Front Glass Door Lock and Key: with toughened glass: with 1U cable Manager: Fan: 6 socket PDU (550MM x 630MM) Make: Comrack/ Valrack/ Netrack.

SITC of 3 core 1.5sqmm Power cable. Make: Havells/ Finolex/ Polycab.

SITC of CAT 6 UTP Cable.Transmission frequency of 250 MHz (Minimum),cable Should be 4 pair and Cable should be jacket FR PVC Lbp 69% required with certification report. Make: Panduit/RandM/Systimax.

Supply and erection of 25 mm dia PVC conduit pipe ISI marked (Medium) recessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. Make Diplast/Polyplast

SITC of 6 KVA Online UPS Overvoltage cut-off device (OVCD),Support for up to 42 AH external battery cabinets, Generator Compatible with Wide Input. Wide Input Voltage window (110 – 280Vac) for IndianEnvironmental Condition andfor Optimized BatteryPerformance. UPS would support SNMP Mnagaer and web browser On Line With 1 hour Backup MAKE APC/ LIBERT / EINOVA / DELTA/Emerson

`Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.`

`Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.`

`PProviding and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.`

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Bajri (coursed) screened and washed graded from 20 mm to 25 mm (from Ghaggar or approved equivalent quarry)

Broken stone,screened, washed and graded from 50 mm to 75 mm (from Ghaggar or approved equivalent quarry)

Providing and fixing of insulated rubber matting suitable for 11 KV installation 1 M x 2 M x 12 mm thick (IS code 15652-40091) as per specification complete and as per directions of Engineer-in-charge

Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages.

Supply and erection of shock restoration chart in glass frame.

Supply and Erection of mild steel bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction engineer in charge of the work (size 6`x4` made of GI pipe 32mm dia).

Laying of underground cable 0.75 metre below ground level covered with sand and bricks including excavation and refilling of trenches.:-300 to 400 sqmm 3 to 3.5 core

Laying of underground cable in pipe /existing open/closed trench etc as required:-300 to 400 sqmm 3 to 3.5 core

Supply and erection of straight through joint (cable jointing kit) 1.1 KV grade complete with required quantity of resin, hardener, plastic mould G.P. Putty, adhesive, earth continuity, connections and fixing the same in position complete with joint etc. - Straight through Joint.For 70 sqmm to 150 sqmm Cable 3 to 4 Core

Supply and erection of straight through joint (cable jointing kit) 1.1 KV grade complete with required quantity of resin, hardener, plastic mould G.P. Putty, adhesive, earth continuity, connections and fixing the same in position complete with joint etc. - Straight through Joint.For 400 sqmm Cable 3 to 4 Core

Laying and erection of XLPE (E)II kv HT aluminium conductor armoured cable 1 metre below ground level with sand and bricks with all labour and material including digging and refilling of trench as required ,up to 120 sqmm 3 core XLPE Cable

Laying and erection of XLPE II or 33 kv HT aluminium conductor armoured cable ISI mark laid on surface/pipe/cable tray with all labour and material as required ,up to 120 sqmm 3 core XLPE Cable

Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 240 to 400 sqmm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 TO 120 sqmm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 240 to 400 sqmm

Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 300 to 400 Sqm

Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 TO 120 sqmm

`Supply and erection of P.U Painted 6 Mtr. Decorative Pole made out of GI Pipe as per our Cat no.( VSTP-41-60 ) with M.S Base Plate Ø340x6mm. inbuilt Control Box at the bottom of the pole for space for Housing MCB and Terminal strip etc. Nos. 30 50895 1526850 Specification of Pole Sections: 1st Section - Ø139.7 x 4.2 x 6000mm without Bracket With Foundation Bolt 20x700x4Nos. Without Light With Polyurthane Painted as per your given color shade With Electrical Accessories like - Bakelite Sheet and Wire including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 7 Metre Long pole with top dia 75 0mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mm `

Supply and erection of Bollards Led for garden made out extruded aluminium profile with aluminium base and PC/PMMA diffuser for uniform light distribution. VSTP BL 1309, 9 watt led height 800 mm.Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.

Supply and erection of weather proof M.S. box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S. sheet hinged cover, locking arrangement , housed in wall , including the cost of 1 no. 16 amp. 415 volts SP MCB and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board/10 mm Bakellite sheet in the M.S. box including painting and necessary connections .

Supplying, installing, testing and commissioning of out door, non walk in type 500 KVA package substation, with 11KV/433 volts Transformer, Ring main unit and LT ACB in one enclosure (with base frame) complete with specifications all as specified and directed :-

Design, fabrication, supply of LT Panels fabricated out of 2mm thick for structural members (Load bearing members) and 1.6mm thick for door and covers (Non load bearing members) CRCA sheet in cubicle compartmentalize free standing floor mounted, dust and vermin proof to provide a degree of ingress protection of IP 42 with reinforcement of suitable size angle iron, channel `T` irons and / or flats wherever necessary, 16 gauge CRCA sheet steel shall be used for final distribution panels. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of zinc chromate primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for all distribution panels. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system and with 10% spare space, lifting hooks shall also be provided in Case of large panels. electrical and mechenical interlocking also req. in all incommers and buscoupller ACB. Make - Tricolite/EEE POWER/ADLEC/ABB/LandT

Compact Ring Main Unit : - Four Ways, 11kV, 630Amps 21kA for 3 sec., SF6 insulated Non-Extensible Compact switchgear consisting of three No. INCOMERS of Isolator Function and one No OUTGOING fixed Manual Vacuum Circuit Breaker of 630 Amps in SF6 insulated Stainless steel enclosure with self-powered series trip microprocessor base numerical over current and earth fault relay CSPR for protection. RMU-NON-Extensible (3 No. Isolator, 1 No. Vacuum Circuit Breaker - with Aluminium Busbar)-BIL 28/75kV, Temp. Range -5 Deg. C to plus 40 Deg. C and Altitude up to 1000 meter

`Supply of IP20 2x2 LED Square light, housing made up of CRCA with opal polystrene Diffuser with Energy efficient LEDs having diffused wide beam angle for uniform lighting with system power 24W. Luminous flux of luminaire 2880 lm, system efficacy )120lm/W, CRI ) 80, direct light emission, 240V constant current driver. Power Factor )0.95, THD (10% and CCT -6500K, Internal wiring along with Electronic Driver having an in built Surge Protection of 4kV. Product dimension : L-595mm, W-595mm, H-35mm Similar to Eveready MASTERLITE EXECUTIVE N LEDPLB024I6-03NHE or Equivalent`

`Supply of IP20 2x2 LED Square light, housing made up of CRCA with opal polystrene Diffuser with Energy efficient LEDs having diffused wide beam angle for uniform lighting with system power 36W. Luminous flux of luminaire 3600 lm, system efficacy )100lm/W, CRI ) 80, direct light emission, 240V constant current driver. Power Factor )0.95, THD (10% and CCT -6500K, Internal wiring along with Electronic Driver having an in built Surge Protection of 4kV. Product dimension : L-595mm, W-595mm, H-35mm Similar to Eveready MASTERLITE EXECUTIVE NS LEDPLB036I6-03NS or Equivalent`

`Supply of IP20 1x1 LED Square light, housing made up of CRCA with opal polystrene Diffuser with Energy efficient LEDs having diffused wide beam angle for uniform lighting with system power 18W. Luminous flux of luminaire 1980 lm, system efficacy )110lm/W, CRI ) 80, direct light emission, 240V constant current driver. Power Factor )0.95, THD (10% and CCT -6500K, Internal wiring along with Electronic Driver having an in built Surge Protection of 4kV. Product dimension : L-296mm, W-296mm, H-55mm Similar to Eveready MASTERLITE LEDPLB018I6-04 or Equivalent`

`Supply of IP20 round surface mounted LED downlighter, housing made up of pressure die cast aluminium with Opal acrylic Diffuser with Energy efficient LEDs having diffused wide beam angle with system power 12W. System efficacy )100lm/W, CRI ) 80, direct light emission, 240V constant current driver. Power Factor )0.95, THD (10% and CCT -6500K, Internal wiring along with Electronic Driver having an in built Surge Protection of 2.5kV. Similar to Eveready NULITE S LEDDNRS012I6-01 or Equivalent`

`Supply of IP20 round surface mounted LED downlighter, housing made up of pressure die cast aluminium with Opal acrylic Diffuser with Energy efficient LEDs having diffused wide beam angle with system power 15W. System efficacy )100lm/W, CRI ) 80, direct light emission, 240V constant current driver. Power Factor )0.95, THD (10% and CCT -6500K, Internal wiring along with Electronic Driver having an in built Surge Protection of 2.5kV. Similar to Eveready NULITE S LEDDNRS015I6-01 or Equivalent`

`Supply of IP20 surface mounted LED batten, housing made up of extruded aluminium with opal polycarbonate Diffuser with Energy efficient LEDs having diffused wide beam angle for uniform lighting with system power 20W. System efficacy )100lm/W, direct light emission, 240V constant current driver. Power Factor )0.95, THD (15% and CCT -6500K, Internal wiring along with Electronic Driver having an in built Surge Protection of 2.5kV. Product dimension : L-1135mm, W-24mm, H-38mm Similar to Eveready EASYLITE AL LEDBTA010I6-01 or Equivalent`

`Supply of IP20 surface mounted LED mirror light, housing made up of extruded aluminium with opal polycarbonate Diffuser with Energy efficient LEDs having diffused wide beam angle for uniform lighting with system power 10W. System efficacy )100lm/W, direct light emission, 240V constant current driver. Power Factor )0.95, THD (15% and CCT -6500K, Internal wiring along with Electronic Driver having an in built Surge Protection of 2.5kV. Product dimension : L-557mm, W-28mm, H-38mm Similar to Eveready EASYLITE AL LEDBTA020I6-02 or Equivalent`

`Supply of IP20 surface mounted LED mirror light, housing made up of extruded aluminium with opal polycarbonate Diffuser with Energy efficient LEDs having diffused wide beam angle for uniform lighting with system power 10W. System efficacy )100lm/W, direct light emission, 240V constant current driver. Power Factor )0.95, THD (15% and CCT -6500K, Internal wiring along with Electronic Driver having an in built Surge Protection of 2.5kV. Product dimension : L-557mm, W-28mm, H-38mm Similar to Eveready EASYLITE AL LEDBTA020I6-02 or Equivalent` `Supply of IP20 surface mounted LED batten, housing made up of extruded aluminium with opal polycarbonate Diffuser with Energy efficient LEDs having diffused wide beam angle for uniform lighting with system power 40W. System efficacy )100lm/W, direct light emission, 240V constant current driver. Power Factor )0.95, THD (15% and CCT -6500K, Internal wiring along with Electronic Driver having an in built Surge Protection of 2.5kV. Product dimension : L-1206mm, W-30mm, H-39mm Similar to Eveready EASYLITE AL LEDBTA040I6-01 or Equivalent`

`Supply of IP20 flexible LED strip perfectly suited for interior illumination applications, with system power 15W per meter, Perfectly suited to Cove Lighting. Similar to Eveready Strip Light 5 metre length.`

SITC of 9 Mtr Long Trudge M in 120 W with Six Angular bracket module each of 120W , homogeneous light distribution suitable for landscape area , led lumen output is more than 125lm/ watt with life cycle of 50000 hrs can be mounted on 9 mtr height pole. Every module is in angular shape and produce diffuse light in 120 degree complete fixture is made up of die cast aluminium and proper heat sink on every module complete fixture is weather protected and suitable for outdoor application . Fixture is with Osram / Samsung Led and PHiliphs/ meanwell / Fulham diver. Fixture dia with bracket is 1124mm. Fitting is with all the accessories required for mounting. VAT-PT-TUR-M-POST-120 Code

SITC of bollard light fixture in 600mm height made up of die cast aluminium with light spread in 360 degree downward only. Light should be directed in between 4 lines of aluminium and should be spread in all direction. Bollard is of 5w and led used should be with life cycle of 50000 hrs Fitting with all the accessiries required to mounting including Cost of foundation as per design , bolts etc and all petty material required to complete connection the job in all respect. Make VAK/K Lite

Supply installation testing and Commissioning of 1250A 4P ACB. 50KA 4P MDO including the cost of petty material required to complete the job upto entire satisfaction of Engineer - in - charge. (Make:- Havells/ABB/Siemens)

Supply installation testing and Commissioning of 1000A 4P ACB. 50KA 4P MDO including the cost of petty material required to complete the job upto entire satisfaction of Engineer - in - charge. (Make:- Havells/ABB/Siemens)

Excavation of earth pit 180 cm. round at top and 90 cm. at bottom 4.5 metres deep and refilling the same in plains including supply of necessary charcoal / coke and salt mixture.

Supply and erection of 60 cm. X 60 cm. X 3 mm thick copper plate including fixing with nacessary bolts and nuts to coper tape .

Pdg. Standard watering tank including down pipe and C.I. cover with locking arrangement etc.

Supply and erection of 20 mm x 3 mm thick lightning conductor copper tape fixed with suitable copper stapples of same size.

Supply and erection of copper tape 32 mm x 6 mm thick from earth electrode directly in ground and surface , fixed with suitable copper stapples of same size.

Supply and erection of 25 mm dia meter 1.5 metre long lightning solid coper rod tappered into a point at the top with 16 cm. X 16 cm x 3 mm thick copper base plate and necessary and bolts with washer.

Prioviding and fixing,testing joint made of 20mmx3mm thick copper strips 125mm long with 4 Nos. brass bolts and nuts, check nuts with washer complete.

Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches:- 300 sq mm 3 ½ Core Al cable (Armoured)

Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches:- 185 sq mm 3 ½ Core Al cable (Armoured)

Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches:- 240 sq mm 3/1/2 core Al cable (Armoured)

Supply and erection of under ground cable loose in existing pipe or trenches complete with necessary connections. 300 sq mm 3 ½ Core cable (Armoured)

Supply and erection of under ground cable loose in existing pipe or trenches complete with necessary connections. 185 sq mm 3 ½ Core cable (Armoured)

Supply and erection of under ground cable loose in existing pipe or trenches complete with necessary connections. 50 sqmm.4 core cable (armoured)

Supply and erection of under ground cable loose in existing pipe or trenches complete with necessary connections. 70 sqmm.3.5 core cable (armoured)

Supply and erection of under ground cable loose in existing pipe or trenches complete with necessary connections. 120 sq mm 3 ½ Core cable (armoured)

Supply and erection of under ground cable loose in existing pipe or trenches complete with necessary connections. 400 sq mm 3/1/2 core cable (Armoured)

Supply and erection of under ground cable loose in existing pipe or trenches complete with necessary connections. 10 sq mm 4 Core cable (Armoured)

Supply and erection double pole / Four pole Residual current circuit breaker (RCCB/ELCB) suitable for operation on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required tocomplete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. 16A/240V DP ELCB with 100mA sensitivity.

Supply and erection double pole / Four pole Residual current circuit breaker (RCCB/ELCB) suitable for operation on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required tocomplete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. 40A/415V FP ELCB with 100mA sensitivity.

Supply and erection double pole / Four pole Residual current circuit breaker (RCCB/ELCB) suitable for operation on 240/415V, 5Hz. AC supply installed in existing sheet steel enclosures including making necessary connections and bonding to earth with all labour and material required tocomplete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. 63 A/415V FP ELCB with 100mA sensitivity.

Supply and erection of 50mm diameter 1.5 Mtr long GI bracket (B-Class) making an angle 10 to 15 degree with horizental plane for mounting street fitting on GI bracket on wall with 2 Nos. 50mmx3mm thick MS flat including cost of cutting welding of GI pipe complete with cement sand mixture bolts and nuts etc. including making necessary connection with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-charge of the work. (HSR31.53)

Supply and erection of PVC pipe of 6 kg. Pressure, laid 1 metre below ground level complete, including digging refilling of the trench with jointing etc:-PVC pipe 120 mm dia

Supply and erection of PVC pipe of 6 kg. Pressure, laid 1 metre below ground level complete, including digging refilling of the trench with jointing etc:- PVC pipe 65 mm dia

Supply installation testing and commissioning of Wall/free floor mounting dust and vermin proof compartmentalized cubical panel made out of 2mm thick CRCA sheet, required hardware 3mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zine/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. the panel having PU/Neoprene rubber gasket of not less than 3mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch wear as per detail.

Suppliying and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation Complete in all respect.

Supply and fixing of rotary handle for on/off operation of existing MCCB in th LT panel including fixing the same in position with all labour and material required to complete the job in all respect Rotary handle up to 125A, MCCB

Supply and fixing of rotary handle for on/off operation of existing MCCB in th LT panel including fixing the same in position with all labour and material required to complete the job in all respect Rotary handle above 125A, MCCB

S/E/T/C of RG-11 Coaxial cable i existing conduit , PVC channel complete in all respect with all labour and material required to complete the JOB HSR 31.79

`Variable Refrigerant Flow System Supply Installation Testing and Commissioning of Variable Refrigerant Flow air cooled Outdoor Units suitable for cooling and heating, having all hermetically sealed inverter type Scroll / Twin rotary Compressor(s) , microprocessor based controller, top discharge type condensing units with R410 A refrigerant , vibration isolators with suitable foundation etc. complete as required. The Outdoor unit should have anti corrosive, fins along with auto dust removal as a standard feature. The unit shall deliver the rated capacity at AHRI conditions and work even at 50 Deg C ambient temperature without tripping. The unit shall be suitable to work on 400 V plus /-10% 3 phase , 50 Hz AC power supply. The COP at AHRI in Cooling mode should not be less than 3.1 and IEER 6.5 . Each ODU whether used individually or connected in module to make bigger ODU should have minimum 2 compressors. Make:Toshiba/Mitsubishi Heavy/O General` 104 HP - 60HP (22 plus 22 plus 16 HP) plus 44HP (22 plus 22 HP)

`Variable Refrigerant Flow System Supply Installation Testing and Commissioning of Variable Refrigerant Flow air cooled Outdoor Units suitable for cooling and heating, having all hermetically sealed inverter type Scroll / Twin rotary Compressor(s) , microprocessor based controller, top discharge type condensing units with R410 A refrigerant , vibration isolators with suitable foundation etc. complete as required. The Outdoor unit should have anti corrosive, fins along with auto dust removal as a standard feature. The unit shall deliver the rated capacity at AHRI conditions and work even at 50 Deg C ambient temperature without tripping. The unit shall be suitable to work on 400 V plus /-10% 3 phase , 50 Hz AC power supply. The COP at AHRI in Cooling mode should not be less than 3.1 and IEER 6.5 . Each ODU whether used individually or connected in module to make bigger ODU should have minimum 2 compressors. Make:Toshiba/Mitsubishi Heavy/O General` 60 HP - (22 plus 22 plus 16 HP)

`Variable Refrigerant Flow System Supply Installation Testing and Commissioning of Variable Refrigerant Flow air cooled Outdoor Units suitable for cooling and heating, having all hermetically sealed inverter type Scroll / Twin rotary Compressor(s) , microprocessor based controller, top discharge type condensing units with R410 A refrigerant , vibration isolators with suitable foundation etc. complete as required. The Outdoor unit should have anti corrosive, fins along with auto dust removal as a standard feature. The unit shall deliver the rated capacity at AHRI conditions and work even at 50 Deg C ambient temperature without tripping. The unit shall be suitable to work on 400 V plus /-10% 3 phase , 50 Hz AC power supply. The COP at AHRI in Cooling mode should not be less than 3.1 and IEER 6.5 . Each ODU whether used individually or connected in module to make bigger ODU should have minimum 2 compressors. Make:Toshiba/Mitsubishi Heavy/O General`54 HP - (16 plus 16 plus 22 HP)

`Variable Refrigerant Flow System Supply Installation Testing and Commissioning of Variable Refrigerant Flow air cooled Outdoor Units suitable for cooling and heating, having all hermetically sealed inverter type Scroll / Twin rotary Compressor(s) , microprocessor based controller, top discharge type condensing units with R410 A refrigerant , vibration isolators with suitable foundation etc. complete as required. The Outdoor unit should have anti corrosive, fins along with auto dust removal as a standard feature. The unit shall deliver the rated capacity at AHRI conditions and work even at 50 Deg C ambient temperature without tripping. The unit shall be suitable to work on 400 V plus /-10% 3 phase , 50 Hz AC power supply. The COP at AHRI in Cooling mode should not be less than 3.1 and IEER 6.5 . Each ODU whether used individually or connected in module to make bigger ODU should have minimum 2 compressors. Make:Toshiba/Mitsubishi Heavy/O General 44HP - (22 plus 22 HP)

`Variable Refrigerant Flow System Supply Installation Testing and Commissioning of Variable Refrigerant Flow air cooled Outdoor Units suitable for cooling and heating, having all hermetically sealed inverter type Scroll / Twin rotary Compressor(s) , microprocessor based controller, top discharge type condensing units with R410 A refrigerant , vibration isolators with suitable foundation etc. complete as required. The Outdoor unit should have anti corrosive, fins along with auto dust removal as a standard feature. The unit shall deliver the rated capacity at AHRI conditions and work even at 50 Deg C ambient temperature without tripping. The unit shall be suitable to work on 400 V plus /-10% 3 phase , 50 Hz AC power supply. The COP at AHRI in Cooling mode should not be less than 3.1 and IEER 6.5 . Each ODU whether used individually or connected in module to make bigger ODU should have minimum 2 compressors. Make:Toshiba/Mitsubishi Heavy/O General` 16 HP

`High Static Ducted Units Supply Installation Testing and Commissioning of following minimum capacity High Static VRV/VRF Ducted Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve ,outer cabinet, drain pump grill, necessary supports, vibration isolation, corded/Cordless remote control etc suitable for operation on 230 V plus - 10% 50 Hz AC supply Make: Toshiba/Mitsubishi Heavy/O General 6.4TR `

`High Static Ducted Units Supply Installation Testing and Commissioning of following minimum capacity High Static VRV/VRF Ducted Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve ,outer cabinet, drain pump grill, necessary supports, vibration isolation, corded/Cordless remote control etc suitable for operation on 230 V plus - 10% 50 Hz AC supply Make: Toshiba/Mitsubishi Heavy/O General 8.0TR

`Y Joints Supply, fixing and commissioning of refrigerant joint / Branch distibutors between Outdoors with nitrile rubber insulation, supporting etc. complete as required. Make: Toshiba/Mitsubishi Heavy/O General`

`Supply, fixing and commissioning of refrigerant joint / Branch distibutors between Indoors with nitrile rubber insulation, supporting etc.complete as required. Make: Toshiba/Mitsubishi Heavy/O General`

`Supply installation Testing and Commissioning of Touch Type centralised controller suitable for Controlling to connect all indoor units as complete as required. Make: Toshiba/Mitsubishi Heavy/O General`

`Refrigerant Piping Supply installation Testing and Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for F/VRV system, complete with fittings, with suitable adjustable ring type hanger supports, ng/brazing including accessories insulated with XLPE Class O tubular insulation/with Class O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories. Make: Totaline/Met Tube/Rajco/Mandev` 6.5 mm dia (OD) (soft drawn) with appropriate tube thickness with 13mm thick insulation

`Refrigerant Piping Supply installation Testing and Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for F/VRV system, complete with fittings, with suitable adjustable ring type hanger supports, ng/brazing including accessories insulated with XLPE Class O tubular insulation/with Class O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories. Make: Totaline/Met Tube/Rajco/Mandev` 9.5 mm dia (OD) (soft drawn) with appropriate tube thickness with 13mm thick insulation

`Refrigerant Piping Supply installation Testing and Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for F/VRV system, complete with fittings, with suitable adjustable ring type hanger supports, ng/brazing including accessories insulated with XLPE Class O tubular insulation/with Class O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories. Make: Totaline/Met Tube/Rajco/Mandev` 12.7 mm dia (OD) (soft drawn) with appropriate tube thickness with 13mm thick insulation

`Refrigerant Piping Supply installation Testing and Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for F/VRV system, complete with fittings, with suitable adjustable ring type hanger supports, ng/brazing including accessories insulated with XLPE Class O tubular insulation/with Class O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories. Make: Totaline/Met Tube/Rajco/Mandev` 15.86 mm dia (OD) (soft drawn) with appropriate tube thickness with 13mm thick insulation

`Refrigerant Piping Supply installation Testing and Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for F/VRV system, complete with fittings, with suitable adjustable ring type hanger supports, ng/brazing including accessories insulated with XLPE Class O tubular insulation/with Class O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories. Make: Totaline/Met Tube/Rajco/Mandev` 19 mm dia (OD) (Soft/Hard drawn) with appropriate tube thickness with 13mm/19mm thick insulation

`Refrigerant Piping Supply installation Testing and Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for F/VRV system, complete with fittings, with suitable adjustable ring type hanger supports, ng/brazing including accessories insulated with XLPE Class O tubular insulation/with Class O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories. Make: Totaline/Met Tube/Rajco/Mandev` 22.2 mm dia (OD) (Hard drawn) with appropriate tube thickness with 19mm thick insulation

`Refrigerant Piping Supply installation Testing and Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for F/VRV system, complete with fittings, with suitable adjustable ring type hanger supports, ng/brazing including accessories insulated with XLPE Class O tubular insulation/with Class O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories. Make: Totaline/Met Tube/Rajco/Mandev` 28.58 mm dia (OD) (Hard drawn) with appropriate tube thickness with 19mm thick insulation

`Refrigerant Piping Supply installation Testing and Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for F/VRV system, complete with fittings, with suitable adjustable ring type hanger supports, ng/brazing including accessories insulated with XLPE Class O tubular insulation/with Class O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories. Make: Totaline/Met Tube/Rajco/Mandev` 31.8 mm dia (OD) (Hard drawn) with appropriate tube thickness with 19mm thick insulation

`Refrigerant Piping Supply installation Testing and Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for F/VRV system, complete with fittings, with suitable adjustable ring type hanger supports, ng/brazing including accessories insulated with XLPE Class O tubular insulation/with Class O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories. Make: Totaline/Met Tube/Rajco/Mandev` 34.9 mm dia (OD) (Hard drawn) with appropriate tube thickness with 19mm thick insulation

`Refrigerant Piping Supply installation Testing and Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for F/VRV system, complete with fittings, with suitable adjustable ring type hanger supports, ng/brazing including accessories insulated with XLPE Class O tubular insulation/with Class O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories. Make: Totaline/Met Tube/Rajco/Mandev` 38.1 mm dia (OD) (Hard drawn) with appropriate tube thickness with 19mm thick insulation

`Refrigerant Piping Supply installation Testing and Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for F/VRV system, complete with fittings, with suitable adjustable ring type hanger supports, ng/brazing including accessories insulated with XLPE Class O tubular insulation/with Class O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories. Make: Totaline/Met Tube/Rajco/Mandev` 41.27 mm dia (OD) (Hard drawn) with appropriate tube thickness with 19mm thick insulation

`Refrigerant Piping Supply installation Testing and Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for F/VRV system, complete with fittings, with suitable adjustable ring type hanger supports, ng/brazing including accessories insulated with XLPE Class O tubular insulation/with Class O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories. Make: Totaline/Met Tube/Rajco/Mandev` 44.5 mm dia (OD) (Hard drawn) with appropriate tube thickness with 19mm thick insulation

`Drain Piping Supply Installation Testing and Commissioning of rigid UPVC piping with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation etc. complete as required. Make: Supreme/Prince/Finolex` 25 mm dia ( with 6 mm nitrile rubber Insulation)

`Drain Piping Supply Installation Testing and Commissioning of rigid UPVC piping with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation etc. complete as required. Make: Supreme/Prince/Finolex` 32 mm dia ( with 6 mm nitrile rubber Insulation)

`Supply Installation Testing and Commissioning of Site fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Make: Tata/Jindal/Sail` 24 Guage - Thickness 0.63 mm Sheet

`Supply Installation Testing and Commissioning of Site fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Make: Tata/Jindal/Sail` 22 Guage - Thickness 0.80 mm Sheet

`Supply Installation Testing and Commissioning of Site fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Make: Tata/Jindal/Sail` 20 Guage - Thickness 1.00 mm Sheet

Supply installation and fixing of fire retardant non porous double layer flexible connection between each AHU as complete as required.

`Grilles / Diffuser Supplying and fixing of powder coated extruded aluminum Supply Air Grills with aluminum volume control dampers as per specifications. Make: Tristar/Airflow/Ravistar`

`Grilles / Diffuser Supplying and fixing of powder coated extruded aluminum Supply and Return Air Diffusers with aluminum volume control dampers as per specifications. Make: Tristar/Airflow/Ravistar`

Supplying and fixing of acoustic lining of duct with Open Cell Nitrile Rubber density 140-180 Kg/m³. Applied by Adhesive, conforming to standard specification. Make : Armacell/K-Flex/Arma Flex 10 mm thick open cell nitrile rubber.

`Cable Tray Fabrication, supplying and installing of GI tray with cover of following sizes of horizontal and vertical bends, reducers, tees, cross members and other accessories etc. as required and duly supported from the ceiling with dash fastness including painting of suspenders required for accomodating/ laying of refrigerant pipes as complete as required. Make: Mem/Slotco/Legrand` a) 150 x 50 x 1.6 mm

`Cable Tray Fabrication, supplying and installing of GI tray with cover of following sizes of horizontal and vertical bends, reducers, tees, cross members and other accessories etc. as required and duly supported from the ceiling with dash fastness including painting of suspenders required for accomodating/ laying of refrigerant pipes as complete as required. Make: Mem/Slotco/Legrand` 375 x 50 x 1.6 mm

`Supply and Installation of control cum transmission wiring of 3 core x 1.5 sqmm Shielded copper in suitable pvc conduits between indoor and outdoor unit as complete as required. Make: Polycab/Finolex/KEI`

Refrigerant gas R-410 for top up as complete as required.

MS Fabricated (Heavy Duty ) ODU Frame

`Supply, installation, testing and commissioning of factory fabricated Double Skin Air- handling unit horizontal type fabricated out of extruded aluminium section consisting with 0.63 mm pre-plasticized/pre-coated Galvanised steel sheet outside and 0.63 mm plain galvanised steel sheet inside with blower, blower section, fan motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, Multi Row deep cooling coil made of Aluminium finned Copper tube with coil section, pre - filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package etc. The AHU panels with thermal break profile insulated with (50±2) mm thick and 40 ± 2 Kg/m³ density PU foam. The motor and blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall conform to standard specification. Constructional Features of DOUBLE SKIN TYPE HORIZONTAL FLOOR MOUNTED AIR HANDLING UNITS. ? Mixing box with manually operated fresh and return air AL dampers. ? Filter section with 50 mm thick box type pre-filter. ? Coil section with multi-rows deep DX type cooling coil. ? Fan section with SISW centrifugal direct driven plug fan, motor VFD Compatible and spring isolators. ? Supply air manually operated AL damper. ` AHU Cap Static pressure Cooling Coil Filteration CFM mm of WC R/D Deep Level 13500 50 mm 6 Row 10 Mircon

`4 Way Cassette indoor unit Supply Installation Testing and Commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve ,outer cabinet, drain pump grill, necessary supports, vibration isolation, corded/Cordless remote control etc suitable for operation on 230 V plus - 10% 50 Hz AC supply 4.0TR Make: Toshiba/Mitsubishi Heavy/O General`

`4 Way Cassette indoor unit Supply Installation Testing and Commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve ,outer cabinet, drain pump grill, necessary supports, vibration isolation, corded/Cordless remote control etc suitable for operation on 230 V plus - 10% 50 Hz AC supply Make: Toshiba/Mitsubishi Heavy/O General` 3.2TR

`4 Way Cassette indoor unit Supply Installation Testing and Commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve ,outer cabinet, drain pump grill, necessary supports, vibration isolation, corded/Cordless remote control etc suitable for operation on 230 V plus - 10% 50 Hz AC supply Make: Toshiba/Mitsubishi Heavy/O General` 3.0TR

`4 Way Cassette indoor unit Supply Installation Testing and Commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve ,outer cabinet, drain pump grill, necessary supports, vibration isolation, corded/Cordless remote control etc suitable for operation on 230 V plus - 10% 50 Hz AC supply Make: Toshiba/Mitsubishi Heavy/O General` 2.0TR

`4 Way Cassette indoor unit Supply Installation Testing and Commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve ,outer cabinet, drain pump grill, necessary supports, vibration isolation, corded/Cordless remote control etc suitable for operation on 230 V plus - 10% 50 Hz AC supply Make: Toshiba/Mitsubishi Heavy/O General` 1.5TR

`Supply, installation and testing of acoustic lining of ducts with glass wool of 24 Kg/sqcm, the glasswool shall be covered with RP tissue paper and fixed with roofing nut and bolt complete as per specification and complete as per requirement.. Thermal conductivity of the insulation material shall not exceed 0.047 W/moK at an average temperature of 20oC. 25 mm thick acoustic lining Make: UP Twiga/ Ownes Corning`

`Supply and fixing of following thickness duly laminated aluminium foil finish closed cell Nitrile rubber ( Class O) insulation on duct after applying suitable adhesive for Nitrile rubber . The joints shall be sealed with 50 mm wide and 3mm thick self adhesive nitrile rubber insulation complete as per specifications and as required. (a) 19 mm thick insulation with Aluminium foil. Make: Supreme/A Flex/K FLex.`

`Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.`

Supplying, installation, testing and commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

Supply, installing, testing and commissioning of UL/FM listed addressable intelligent rate of rise cum fixed temperature thermistor type resettable Heat detector with mounting base , dual LED, complete with base as required.

Supplying, installation, testing and commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.

`Supply, installation, testing and commissioning of integral microprocessor (not microcontroller) intelligent addressable type manual call point, 1 stage with in-built LED, lighting up automatically to confirm its actuation complete as per specification as required.`

Supply, installation, testing and commissioning of UL/FM Listed wall mounted hooter with strobe (100 dba) complete as per specification as required.

Supply, installing, testing and commissioning of addressable and automatic control modules for Hooter . UL/FM Listed

`Supply, installing, testing and commissioning of addressable type Fault Isolators for isolating shorted, de wired and loose circuits between two successive fault isolators with automatic resetting arrangement.`

Supplyinf and fixing of Emergency Exit Light (double side) alongwith necessary power backup,battery i/c all necessary connections/ interconnections with suspension kit/ other reqd accessories if any as required .

Supplying and drawing of 2x1.5 sqmm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/ tray as required. Wiring for smoke/heat detectors. Wiring for Input/Output modules. Wiring for manual call point.

Supply, installing, testing and commissioning of Repeater Panel with 6 inch 640-characters: The LCD shall Display all events / detectors, devices status of complete systems , UL/FM Listed

Supply. installation. testing and commissioning of Long Throw Proiection Zoom Lens to project desired size from (approx throw required 4.7:1) and as per the specifications, complete as required. Make-HRISTIE/DLP/OPTOMA

SITC of Iron arm suspension lift for projectors weighing upto 60kg(OEM). Make-Custom

SITC of Motorized Screen with Unity Gain Projection Screen with minimum Projection area of 14.4X8.1 Feet, complete with other accessories/provisions as per the site requirement for the Complete functioning. Milan, Draper, Dalite. Make-DALITE/DRAPER/PRIMA/LIBERTY

SITC of 55` or higher Cieling Mounted 4K Professional Display Panel with 400 cd/? brightness and 178 degrees horizontal and vertical viewing angle. The display should have HDMI X3 In, DP X1 In, DVI - D X1 In, VGA X 1 In and HDMI X1 Out. It should have USB X 2 In , Serial Input X 1, complete with other accessories/provisions as per the site requirement for the complete functioning. Make-SAMSUNG / CHRISTIE / PLANNAR

Supply, Installation, Testing and Commissioning of AV Over IP Scaling Multimedia Encoder, Min. Resolution WUXGA ,Range upto 100 meters, PoE (Power over Ethernet) , Video input: 1x HDMI Type A, female, Video output: 1x LAN RJ4 connector, Audio input:1 x 3.5mm L/R Analogue audio, Audio output connectors: 2x RCA L/R Analogue audio, Ethernet port: 1x LAN RJ45 connector, RS-232 Serial port: 1x 3-Pin Phoenix connector, USB/KVM Port: 1x USB -Type B , IR input: 1x 3.5mm stereo jack, IR output: 1x 3.5mm mono jack and as per specifications, complete as required. Make-KRAMER/EXTRON / LIBERTY

Supply, Installation, Testing and Commissioning of AV Over IP Scaling Multimedia Decoder, Min. Resolution 1920 x 1200, Video Input Connector: 1x LAN RJ4 connector, Video Output Connectors: 1 x HDMI Type A, Female, Audio output Connectors: 2 x RCA L/R Analogue audio, Ethernet Port: 1 x LAN RJ45 connector, RS232 Serial Port: 1 x 3-pin Phoenix connector, USB/KVM Port: 2 x USB - Type A, IR Input ports: 1 x 3.5mm sterioe jack, IR ouptuts ports: 1 x 3.5mm mono jack and as per the specifications, complete as required. Make-KRAMER/EXTRON / LIBERTY

Supply, Installation, Testing and Commissioning of Network Switch with 24 ports L3 manage, Forwarding performance (64-byte packet size) 9.52 Mbps, `Conforming to secure Shell (SSH), RADIUS and TACACS protocols, 12.8 gbps Backpane, Should have Jumbo Frame and IGMP snooping functionality, 350 watt POE` as per specifications, complete as required. Make-DLINK/CISCO/LIBERTY

Supply, Installation, Testing and Commissioning of All in one PC with screen size of minimum 18.5`, 8th Generation Intel Core i3 Processor, Windows 10 Pro 64, 4 GB DDR4-2133 SDRAM (1 x 4 GB) 1 TB 7200 rpm SATA, Intel UHD Graphics 620 compete with MS Office and Keyboard mouse etc and as per the specifications, complete as required. Make-DELL/ SAMSUNG/LG

Supply, Installation, Testing and Commissioning of PTZ Camera with HD Resolution Real High Definition Image with 1/2.3 inch or better, high quality HD CMOS sensor, 1920 x 1080 super high quality video, 20x or more zoom with 12x or more digital zoom, PAN range: 170deg or more with High Definition Video ouptut Interface for video and RS 232 / RS 422 for controls 10 or more preset position and as per the specifications, complete as required.

Supply, Installation, Testing and Commissioning of Joystics control for the above mentioned cameras with control capacity upto 4 nos. cameras, PAN / Tilt / Zoom feature and as per the specifications, complete as required. Make-LUMENS/SONY/POLYCOMM/HIKVISION

Supply, Installation, Testing and Commissioning of Cable Cubby with pneumatic movement and mechanical latching mechanism, compact size with rectangular bezel, top surface in black anadized finishes, one CAT6 RJ45 network / Data / Phone connectors, One unswitched AC outlet, One Data input on HD 15 Connector, One input on HDMi, One input for S-Video and scaled output on HDMI and as per the specifications, complete as required. Make-KRAMER/EXTRON / LIBERTY/MSSP

Supply, Installation, Testing and Commissioning of Data Presenter with wireless transmission, 1 x HDMI wired input, Resolution 4K, Output 1 x HDMI, as per the specifications, complete as required. Make-KRAMER/EXTRON / LIBERTY/MSSP

Supply, Installation, Testing and Commissioning of HD Blue-ray Player, Media Compability: Blue-ray, DivX, CD-R/-RW/DVD plus R/ plus RW/-RW, CD-R/R Plaback, DVD plus R/ plus RW, DVD plus R Dual Layer and as per the specifications, complete as required. Make-SONY/TASCAM/PANASONIC

Supply, Installation, Testing and Commissioning of Touch Control System with 7` Touch panel with 9` iPAD, Control Processor with required IR Probes to control AV equipments. Make-PIXILAB/KRAMER

Supply, Installation, Testing and Commissioning of Slim Line Pop Up, 16` LED monitor, Resolution 1920 x 1080 , with HDM) input, USB control as above complete as per the specifications. Make-SAMSUNG/LG/DELL

Supply, Installation, Testing and Commissioning of Visual Presenter with 1/2.8` CCD Sensor, 3 Mega Pixels sensor, 8 x optical zoom and .12x digital zoom, Smart fold system for easy set up and fold down, Light weight and super slim design and,as per the, specifications, complete as required. Make-LUMENS/WOLF VISION

Supply, Installation, Testing and Commissioning of HD recording and Streaming processor, supporting H,264,with , builtin or external recording ,on USB,:or along with media server software for multicasting:, cbmpleteas per the specifications. `Make-LUMENS/SONY/KRAMER / LIBERTY

Supply, Installation, Testing and Commissioning of 36U, Rack with Power indicator, power sockets and isolator fitted duly, front andrear lockable door, and as per the specifications, complete as required. Make-POWERRIDE/MTS/VALLRACK

Supply, Installation, Testing and Commissioning of Digital Multimedia Interactive Podium with Inbuilt Interactive 18` or bigger Touch screen system fully functional to annotate, 1 LED Touch Light ,foldable platform for visual presenter. Patch Panel fitted on top with 1 x HDMI Input • 1 x VGA Input and as per the specifications, complete as required. Make-MSSP/MTS/TEACOM

Supply, Installation, Testing and Commissioning of Wooden Podium with approx size Depth: 11.5`, Height: 46`, Width: 18`, make-MSSP/MTS/TEACOM

Supply, Installation, Testing and Commissioning of Preview Montior for Control Room/ green rooms with 32 inch size, resolution 1920 x 1080 , 1 X HDMI Inputs with wall mounting bracket.` Make-SAMSUNG/LG/DELL

Supply, Installation, Testing and Commissioning of Shielded Twisted Pair Cable. Conductor Metal: Solid Bare Copper with 23 AWG Color Code: ,Blue/ Grey ( or any combination) , Jacket Material: PVC UL94V-0 and as per the specifications, complete as required. Make-BELDEN/KRAMER/COMSCOP

Supply, Installation, Testing and Commissioning of HDMI Interface Cable On a male HDMI type A, 24K gold-plated K`:`Lock connector, Material: TInned Copper/Bare Copper Type: Triple shielding, JACKET Material: PVC ,Length 2 meter and as per the specifications I complete as required. Make-BELDEN/KRAMER/COMSCOP

SITC of stage left and right Line array clusters having 2X10 LF driver or .better andHF drivers (1X1.5 inch), 2 or 3 Way Line array loudspeaker system, with Individual Module free field Frequency Range (-10dB)of 55Hz -18kHz or better and Continuous. Power Handling of )= 650 W LF plus 100W HF.. The Loudspeaker module shall have a Max.SPL(Peak) of130 dB and sensitivity of 94 dB or better.: The Modules shall be of birch plywood construction complete with standard accessories Including Mounting I hanging arrangement for above loudspeaker complete· with standard· accessories etc as per manufacturer. make-JBL/RCF/BOSE

SITC of 2 x 18` ( With 4 inch VC ) subwoofers, having a Freq. Range of 30 Hz -200Hz. It should have an axial Sensitivity of ) =94dB (1W/~m) or more delivering a free field Max. SPL(peak) of )=127 db .. The loudspeaker should have a nominal impedance: 40hm or more and continuous Power Handling of 1500W or more complete with installation as per the site requirement in· birch plywood finish only. Make-JBL/RCF/BOSE

SITC of Stage Monitor /loudspeakers with 1 x 12` Driver: Frequency range of: 70 Hz -16 kHz: Nominal Dispersion·: 90 deg. H x 60 deg V (rotatable hom): Long term Power handling capacity: 400W or better: free field full range Sensitivity : 94 dB SPL or better:· Max SPL (125dB Peak): Nominal Impedance : 8 oms: Enciosure in birch plywood finish only .Make-JBL/RCF/BOSE

SITC of Front Fill loudspeaker with Frequency Response of 90 Hz to 16 kHz or better: Horizontal Nominal Dispersion : 90 degree Horizontal X60 degree Vertical or better: Sensitivity (SPL / 1 W @ 1m) of 92 dB SPLor beter. Continuous Power of 200 Watt or better: Impedance of 8 Ohm : Max SPL Peak of 120 dB· SPL or better Impedance of 8 Ohm : Max SPL Peak of 120 dB· SPL or better : Transduser / Driver of HF: 1 x 1.5` or better: LF: 1 x 8` or better complete with bracket birch plywood finish only.Make-JBL/RCF/BOSE

SITC of Control room` speaker and Green Room Speakers-1 x 5` or better 2-way, , 90 dB sensitivity or better, 8 ohms nominal impedance, Frequency Response: 50Hz-18kHz , Rated Power: 100W RMS or better, Maximum SPL: 115 dB peak or better,all complete with wall mounting Bracket.Make-JBL/RCF/BOSE

SITC of 4 channel class Oil Power amplifier with a Max Output Power of 4x1300W@8 ohms with 4x 2500W @ 4 ohms frequency response. 20Hz -20KHz, SNR of 102dB and with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak purrent Limiters, Tum on delay. etc.Make-CROWN/LABGRUPPEN/DandB

SITC of 2 channel class HIAB amplifier witt1 a Max Output Power of 2x450W@8 ohms with 2x 575W @ 4 ohms frequency response. 20Hz -20 KHz. SNR of 102dB and with built in protection such as Limiters, Temperature,. ~C, Short Circuit, Peak Current Limiters.Turn on delay etc.Make-CROWN/LABGRUPPEN/DandB

ISITC of 32 Channel Mixing console with minimum 32 mic inputs and 2 stereo inputs or better: 4 or better EQ bands: Min 6AUX Sends Effects and Phantom Power complete with standard accessories etc. Make-AMMHA/ ALLEN and HEATH / DIGICO

SITC of handheld microphone with Dynamic type transducer: polar pattern: Cardioid ./ hypercardioid / supercardioid: frequoocy response: 55Hz to 15kHz or better: Sensitivity: 1.85mV or better with Switch complete with standard accessories etc. Make-AKG / SENNHEISER/BOSE

SITC of UHF Wireless Handheld Microphone System, Receiver: Switching bandwidth up to 40 MHz, Transmission range up to 120 m, 16 per frequency band simultaneously active channels, Audio frequency response 45 15 kHz, Audio dynamic range 106 dB (Aweighted with Dynamic capsule with cardioid polar pattem, LC display, 2-stage gain switch, Programmable mute button complete with standard accessories etc. Make-AKG / SENNHEISER/BOSE

SITC of UHF Wireless Lapel Microphone System·, Receiver: Switching bandwidth up to 40 MHz, Transmission range up to 120 m, 16 per frequency band simultaneously active channels, Audio frequency response 45 15 kHz, Audio dynamic range 106 dB (Aweighted with UHF Beltpack Transmitter and Microphone hailing Omnidirectional Polar pattern, Frequency response 20 -20,000 Hz, Open circuit voltag~: 40 mVlPa, Max. SPL 126 dB at 1 kHz. SIN ratio: 51 dB, Equivalent SPL 32 dB complete with standard accessories etc. Make-AKG / SENNHEISER/BOSE

SITC of antena spliter system complete with canble and antena for the wireless microphones with complete with standard accessories etc. Make-AKG / SENNHEISER/BOSE

SITC of gooseneck microphone with polar pattem: Cardioid / hypercardioid I supercardio.id: Gooseneck length: 1.5` or better: S/N Ratio: 65 dB or better: Max SPL: 107 dB or better: Frequency Rsponse: 50 Hz to 17kHz or better witli Shock Mount complete with standard accessories etc. Make-AKG / SENNHEISER/BOSE

SITC of 4 point XLR rnic junction box. Make-NUTRIK

SITC of Small` Big Size Light weight tripod alluminhim Microphone stand with Long Arm. boom type and chrome plating complete with standard accessories etc. Make-MSSP

Supply,lnstallation,Testing andCommissioning of HDMI Interface Cable On a male HDMI type A, 24K gold-plated K-Lock connector, Material: TInned Copper / Bare Copper Type: Triple shielding ,JACKET Material: PVC ,Length 5 meter and as per the specifications, complete as required. Make-BELDEN/KRAMER/COMSCOP

Supply and Laying of 2 core 2.5 sq mm PVC insulated Cu conduction loudspeaker cabfe. complete with standard accessories etc. make-CRYSTAL/POLYCOB/FINOLEX

Supply and fixing of Audio Snake Cable, CM-Rated, 32-24 AWG tinned copper pairs, polyolefin insulation, individually shielded with Foil bonded to numbered/color-coded PVC. jackets so both strip simulteaneously, overall foil shield, drain,f1exible PVC jacket. Make-CRYSTAL/POLYCOB/FINOLEX

SITC of supply and laying of Hig grade professional low noise Mics cables 2 core high Conductlvity PVC insulated in PVC jacket , Ishielded conner cable. Make-CRYSTAL/POLYCOB/FINOLEX

MAIN CURTAIN made out of velvet curtain cloth with horizontal sliding arrangement complete with fixing curved rails, brackets, sliding arrangement and motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP motor (Crompton) 2nos. air breaker contactors (LandT / SIEMENS), 2nos. micro switches for auto stop, 3 nos push buttons for fcrward, reverse and stop pcsiticns. The curtain should be· draped to half area when in closed position. Minimum overlap at centre should be 900mm and should be stitched in double gathering, with Main Frill. Size:-11 m x7.6 m, Make-MECHANISM: MODERN STAGE SERVICE (PROJECTS), FABRIC : RELIANCE , INNOVATION, TAJ

REAR CURTAIN made out of glazed cotton clotr. with horizontal sliding arrangement complete with fixing curved rails, brackets, sliding arrangement and motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP motor (Crompton) 2nos. air breaker contactors (LandT/SIEMENS), 2nos. micro switches for auto stop, 3 nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm and should be stitched in double gathering. Size:-11 m 7.6 m, Make-MECHANISM: MODERN STAGE SERVICE (PROJECTS), FABRIC : RELIANCE , INNOVATION, TAJ

MAIN VALANCE: SITC of High quality Velvet fabric fire retardant treated as per approved colour and make with a gathering of 100% stitched Oas per site condition, curtain provided with eyelets at every 200/250mm for uniform fixing on 25MM GI PIPE (For Main Valance) Size: 10Mtr x 1.5Mtr. Make-MECHANISM: MODERN STAGE SERVICE (PROJECTS), FABRIC : RELIANCE , INNOVATION

`FRILLS Providing and fixing average frills made out of double gathering glazed cotton cloth to be installed above the stage on 25mm dia GI pipe. Size:-12.6 m x 1.5 m, Make-MECHANISM: MODERN STAGE SERVICE (PROJECTS), FABRIC : RELIANCE , INNOVATION`

`CYCLORAMA CUM SCREEN : Cyclorama Screen in Plasitc Perforated material. The screen to be fixed on tubular frame made out of 40mm dia MS pipe and Cross MS Pipe w5mm dia. Size:-10.6 m x 6.4 m, Make-MECHANISM: MODERN STAGE SERVICE (PROJECTS)`

SIDE WINGS: SITC of Fixed Wing Structure designed as per site condition for a height approx 5.5Mtr x 1Mtr made up of MS Square tube of 25mm or higher size rested on pivotable trolley on a track for the rotation of the wing. Adjustable floor locking screw jacks with rubber grips. Make-MECHANISM: MODERN STAGE SERVICE (PROJECTS)

MOTORISED LIGHTING BAR-Supply, installation, testing and commissioning of motorized lighting bar operated with 1 HP 3 phase ( kirloskar I ABBI Siemensl Cromptonl Havells ) motor, Aluminium Ole cast heavy duty gear box` 2 nos. air breaker switch ( LandT siemens) for up and down, 2 nos. micro switch for auto stop, 48 mm dia GI pipe. Pile Winding drum plates of not less than 5mm thickness and suitable dia. to wind 4mm rope for a lift of more than 5 mtr.Make-MECHANISM: MODERN STAGE SERVICE (PROJECTS)

SIDE LADDER: SITC of STAGE SIDE LADDER : M.S. Pipe Ladders to be provided on sides of the Stage to be fixed on the existing GI pipe or top grid. Made of 50mm x 25mm MS pipe of following 2400*600. Make-MODERN STAGE SERVICE (PROJECTS)

`200WLED PROFILE: Power Supply: AC 100V - 240V, 50-60HZ Source- COB LED,Wattage - 200W, CCT – 3200K / 5600K , CRI - =90 , Beam angle - 19°/26°/36° (Optional), R9 Value 90 plus , Tel. Lighting Consistency Index 97 plus , Pan/ tilt - Manual, Controls - DMX512, Auto run, Master/Slave DMX channels - 1/2CH (Single color), 2/5CH (2in1) : (OPTIONAL ) Dimmer/strobe - 0~100% linearly adjustable/ 1-25 times/sec, Operating Voltage - 90-260V AC, IP Rating - IP20, Operating temperature - 30°C~40°C Finish - Black, Certification: CE. Make-MODERN STAGE SERVICE (PROJECTS) `

` 200W LED FRESNEL : Power Supply: AC 100V - 240V, 50-60HZ ,Light Source- COB LED, Wattage - 200W,CCT – 3200K / 5600K , CRI - =90, Beam angle - Manual 19°-50° gives a very soft edged beam as well as spreading a great deal of light outside the beam, Pan/ tilt - Manual Controls - DMX512,mater and slave, auto running, sound mode, DMX channels - 1/2CH(Single color),2/5CH (2in1),3/7CH(3in1,4/8 CH(4in1),Color system - Single WW or CW(150W/200W/300W(2in1/4in1)180W(3IN1), Optional, Dimmer/strobe - 0~100% linearly adjustable Operating Voltage - 90-260V AC,IP Rating - IP20 Operating temperature - 30°C~50°C ,Finish - Black Weight - 8.5 Kg,Certification: CE. Make-MODERN STAGE SERVICE (PROJECTS) `

`200W LED PC: Power Supply: AC 100V - 240V, 50-60HZ ,Light Source- COB LED , Wattage - 200W, CCT – 3200K / 5600K , CRI - =90 , Beam angle - Manual 15°-35°,Pan/ tilt - Manual,Controls - DMX512,mater and slave, auto running, sound mode,DMX channels - 1/2CH(Single color),2/5CH (2in1),3/7CH(3in1,4/8 CH(4in1) Color system - Single WW or CW(150W/200W/300W) 200W/300W(2in1/4in1)180W(3IN1), Optional Dimmer/strobe - 0~100% linearly adjustable Operating Voltage - 90-260V AC,IP Rating - IP20 Operating temperature - 30°C~50°C,Finish - Black Weight - 8.5 Kg, Certification: CE.Make-MODERN STAGE SERVICE (PROJECTS) `

`RGBW LED PAR: Light Source: 54x3W RGBW LEDs Lamp life : 50,000 hrs, Input Voltages: AC90-260V 50/60Hz, ,Power Consumption: 170W, Strobe: high speed white color or color changing strobe with 1-13Hz frequency range, Dimmer: 0-100% electronic dimming Light Angle: 25°, Control: DMX512, master-slave and sound activated or auto operation, Channels: 7 DMX channels USITT DMX-512, Other Functions: LED display, IR Remote control (optional), automatic operation with built-in programs, efficient low noise cooling system IP20, Finish – Black , Certification: CE .Make-MODERN STAGE SERVICE (PROJECTS) `

`MOVING HEAD : Power voltage : AC100-240V , 50/60Hz,Power consumption : 250W,Color temprature : 8500k,Beam Angle : 0°-3.8°(by aperture},Pan/Tilt : 540°/250°,DMX channel mode : 16 channels,Color Wheel : 14 colors plus white with rainbow effect,Gobo wheel : 1 fixed gobo wheel with 17 gobos plus open,Prism : 8/16/24 facet prism rotating in both directions,Focus : Motorized focus,Frost : 0-100%,Display : LCD display Power Socket : Powercon in. Make-MODERN STAGE SERVICE (PROJECTS)`

WW/CW LED PAR : 150W LED , CCT: TW-3200K/TC-5600K, Ra) 93,voltage : ac-100-240v, 50/60Hz, Max Power 143, Power Connection : Power in and out, DMX XLR : DMX SPLITTER IN/OUT.IP 65.Make-MODERN STAGE SERVICE (PROJECTS)

LED BATTEN FOR CURTAIN: Body Material Aluminum alloy structure,Product size 1000mm × 59mm × 116mm, Voltage AC100-240V 50/60Hz Input Power 200W, Lamp Type 18pcs x 10W LEDs Average Life Span 50,000h,Color System 18pcs RGBW 4 in 1 ,Color Temperature 2700K~8000K, Control Channel 8/72/76 control channel modes, Control Mode Standard DMX512, Master/Slave control mode, Sound Active, Auto Run Menu Display LED display, DMX Signal Connection 3-pin XLR In/Out, Beam Angle 25°, 40°(Optional) Working Temperature -20-40?, Make-MODERN STAGE SERVICE (PROJECTS)

`SITC of LED FLOOD LIGHT:LIGHT SOURCE: 70W -100W , Integrated design - means the case never needs to be opened Long lifetime - no bulb replacements plus 70% light output maintenance to 30,000 hours Slimline - main body is 40mm thick. High efficiency - around 85 lumens/watt (4,300lm) More robust .TYPE: MSSP- LED 100W etc complete as required.Make-MODERN STAGE SERVICE (PROJECTS)`

DMX SPLITTER: DMX Splitter with one DMX input and 8 buffered outputs and 3 pin / 5 pin XLR connectors. Make-MODERN STAGE SERVICE (PROJECTS)

`SITC of Suspender cum clamps designed made out of MS material 150mm x 150mm x 5mm MS Base plate Threaded rod, Black powder coated finish All the materials under gone through 7 tank process with various chemical treatment to keep them rust free Suitable to hold various type grid and other rigging systems. Make-MODERN STAGE SERVICE (PROJECTS)`

`SITC of Light Fixture dual safety Chain made up of GI wire rope Bundled and twisted together Having load bearing capacity above 200 Kgs .Make-MODERN STAGE SERVICE (PROJECTS) `

LED PAR : Light Source: 54x3W RGBW LEDs Lamp life : 50,000 hrs Input Voltages: AC90-260V 50/60Hz Power Consumption: 160W Strobe: high speed white color or color changing strobe with 1-13Hz frequency range Dimmer: 0-100% electronic dimming Light Angle: 25° CRI - =90 Control: DMX512, master-slave and sound activated or auto operation Channels: 7 DMX channels USITT DMX-512 Other Functions: LED display, IR Remote control (optional), automatic operation with built-in programs, efficient low noise cooling system IP65 Finish – Black Certification: CE

Light Source: 240W LEDs ( 4-in-1, RGBW), 50,000 hrs, Input Voltages : AC90-260V 50/60Hz, Power Consumption :245W, Strobe 25T/s high speed LED hutter/strobe effect with variable speed, Dimmer 0-100% smooth linear electronic dimmer, general dimming and blackout for all four colors, Effect Macro effect, LED shutter effect Light Angle :25°, Head Movement Manual controllable for tilt angle adjustment Control DMX512, master-slave and sound activated controllable or auto peration,Channels 4/9 DMX channels Other Functions tunning light output with high intensity and high color rendering index Interface IP65 rated lockable power connectors IN/OUT, IP65 rated lockable 3-pin XLR DMX connectors IN/OUT Housing Die-cast aluminum alloy, compact IP65.

Provides one DMX input and 8 buffered outputs The connections are through 3 pin or 5pin XLR connectors. Input : 1, outputs: 1loop, 8 Isolated (8,6,,2 Optional) Connector :XLR 3pin (XLR5 Optional) Power In : 220v/50hz , Fuse : 1A Power Consumption : 50W , IP RATING: IP65, Certification: CE

LIGHT CONTROLLER• DMX channel: 1024.• Fixture: 96.• Channels for each fixture: 40 primary plus 40 fine tune.• Library: Avolite Pearl R20 library supported.• Scene: 60.• Scenes to run simultaneously: 10 • Shapes for each scene: 5.• Scene step:600 • Time control of scenes: Fade in/out, LTP slope • Shape generator: Shapes of Dimmer, Pan/Tilt, RGB, CMY, Color, Gobo, Iris and Focus .• Master slider: Global, playback, fixture .• USB Memory: FAT32 supported approx..• IP-20 , Certification: CE

`Supply of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x 75 x 40mm and 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid. Make-MODERN STAGE SERVICE (PROJECTS) `

`Supply of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 40 x150 x 40mm and 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free with perforation for heat dessipation provided with lid. Make-MODERN STAGE SERVICE (PROJECTS) `

DMX LOOP POINT WIRING WITH ALL REQUIRED CONNECTORS FROM SPLITTER TO ALL LIGHTING FIXTURES. Make-DEEPCAB/CRYSTAL/BELDEN

`SITC of Light Point Wiring from Patch Panel to be Provided near stage to various stage light fixtures with 2.5 Sq.mm 3 Core PVC Insulated and PVC Sheathed Cable including Cable Tray of suitable size for laying these wires on the tray including 15-20 amps metallic clad sockets with box at top etc complete as required.`

SITC of foot power point etc as required. Make-POLYCAB/FINOLEX/NATIONAL/CRYSTAL

SITC of MS suspension grid - Providing and fixing MS angle rafters above stage area of stage at 1200x600mm centres with 2 x 40x40x5mm thick MS angle runners and 25x12x12mm thick studs as MS spacers fixed @ 600mm c/c sandwiched between the MS angle runners so as to maintain 12mm gap between MS Angles. The Grid so formed to be suspended from bottom of the roof structure by means of 35 x 5mm thick MS flat suspenders / fixed to the wall / fixed to Proscenium with MS cleats and dash fasteners at 1200mm centre to the Grid including painting. 10.7mtr x 7.6 mtr (APPROX). Make-TATA/ JINDAL/ SURYA

Supplying at site of work well decayed farm yard manure, from approved source, including screening and stacking.

Digging of pits in all kinds of soil and refilling the same, with the excavated earth mixed with well decayed fary yard manure. Size of pit 0.75X0.75 x0.75 m deep

Planting flower beds including digging and refilling of beds with excavated soil and FYM fertilizer and insecticides planting of sapling at 30cm distance of plant to plant and row to row. Area for Seasoal Flowers

Providing and stacking of Terminalia Mantly of height 244-305 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Schleichera trijuga (Kusum) of height 244-305 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Washingtonia Palm of height 213-244cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and Displaying Bismarckia Palm 152 to 183 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge.

Providing and stacking of Plumeria alba of height 244-305 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.

Providing and stacking of Phoenix sylvestris Roxb. (Wild date palm/khajur) of height 244-305 cm. in Big HDPE Bag as per direction of the officer-in-charge.

Providing and stacking of Chorisia speciosa of height 244-305 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of shrubs and flowers of height 15- 20 cm in poly bags of size 25 cm as per direction of the officer -in -charge.

Supplying at site of work De - oiled Neem-Cake duly packed in used gunny bags.

Maintenance of lawn with fine grass mowing with the help of shrubs master for the 1st year including watering etc.

Maintenance of flower beds for one year including 27 No. waterings @ 4 waterings in the months of March, April, May and June, 2 No irrigations each in the months of February, October, November and December and one irrigation each in July, August and September

`3 SEATER SOFA 2050 (L) X 790 (D) X 750 (H) PROVIDING AND FIXING OF SOFA 2050MM X 750 MM AS PER DESIGN WITH FRAME IN GOOD QUALITY CHAMP WOOD,LEGS IN CP TEAK WOOD. SPRINGS, CANVAS AND POLYFIL WITH FOAMING DONE IN PU FOAM OF 32 DENSITY SLEEPWELL MAKE.UPHOLSTERED IN LEATHERITE WITH CUISHIONING ON BACK (WITHOUT FABRIC)`

`2 SEATER SOFA 1650(L) X 790 (D) X 750 (H) PROVIDING AND FIXING OF SOFA MM X 900 MM AS PER DESIGN WITH FRAME IN GOOD QUALITY CHAMP WOOD,LEGS IN CP TEAK WOOD. SPRINGS, CANVAS AND POLYFIL WITH FOAMING DONE IN PU FOAM OF 32 DENSITY SLEEPWELL MAKE.UPHOLSTERED IN LEATHERITE WITH CUISHIONING ON BACK (WITHOUT FABRIC)`

`SINGLE SEATER SOFA 880(L) X 790 (D) X 750 (H) PROVIDING AND FIXING OF SOFA MM X 900 MM AS PER DESIGN WITH FRAME IN GOOD QUALITY CHAMP WOOD,LEGS IN CP TEAK WOOD. SPRINGS, CANVAS AND POLYFIL WITH FOAMING DONE IN PU FOAM OF 32 DENSITY SLEEPWELL MAKE.UPHOLSTERED IN LEATHERITE WITH CUISHIONING ON BACK (WITHOUT FABRIC)`

`CENTER TABLE 1050 (W) X 1050 (D) X 450 (H) PROVIDING AND FIXING OF CENTRE TABLE OF SIZE 1050MM W X 1050MM H, MS FRAME WITH DULY POWDER COATED WITH TOP OF 18MM THICK ARTIFICIAL STONE WITH THE SUPPORT OF 12MM PLYWOOD.`

`MODULAR DESK - FOR 4 PERSONS Model :- DFS 7005 Size :- 2520(W)x1260(D)x1200(H) MM Providing, supplying and placing workstation table. The main material of the table top made in 25mm thick PLPB. Edging: 2mm pvc Edging, matching color with hot melt glue at 200°C. Table of gable end made in 18mm thick PLPB. 2mm pvc Edging, matching color with hot melt glue at 200°C. Providing, supplying 60mm thick partition with marker board above top and under the top is 9mm penal with 2 raceway 1st raceway above the top and 2nd raceway placed bottom. table top Divided of Fin glass made in 12mm thick. CRCA hanging CPU trolly and PVC keyboard trey.`

`Supply and assembly of Chairs for main Auditorium Hall as per specification given as under. (a) SEAT REST ASSEMBLY : The seat rest assembly is 12mm thick Marine grade plywood (as per IS 710) with moulded polyurethane foam and upholstered with 3 layered foam laminated fabric.The Seat profile is developed to help the users to get necessary comfort in popliteal region and ease of use in forward push for the seat sliding feature. SEAT SIZE : 45.0 cm. (W) x 44.5 cm (D) x 12.0 cm (T) @ Front edge and 8.0 cm @ Rear edge. (b) BACKREST ASSEMBLY : The backrest assembly is made up of a M.S. fabricated frame in situ moulded with polyurethane foam. The back foam is designed with contoured lumber supports for extra comfort at upright and tilt condition.The back frame is having nylon reinforced elastic bands to retain the profile and give a better cushioning feel. BACK SIZE : 46.5 cm. (W) x 62.5 cm. (D) x 9 cm. (T) Avg. `

`Medium Back Chair, Wooden Frame, Wooden Cushion Arm, Knee Tilt, Gas Lift, Chrome Base LeatheriteTapestry SPECIFICATIONS :- SUPPLYING THE HIGH BACK LEATHERITE CHAIR - SEAT / BACK ASSEMBLY. THE SEAT IS MADE UP OF 1.2 TO 1CM. THICK HOT PRESSED PLYWOOD AND UPHOLSTERED WITH SYNTHETIC LEATERITE AND MOULDED POLYURETHANE FOAM,THE BACK IS MADE UP 1.2 plus 0 1CM. THICK HOT PRESSED PLYWOOD AND UPHOLSTERED WITH REPLACEABLE SYNTHETIC LEATERITE UPHOLSTERY COVERS AND MOULDED POLYURETHANE FOAM,THE BACK PLY AND FOAM IS DESIGNED WITH CONTOURED LUMBER SUPPORT FOR COMFORTABLE SEATING POSTURE .BACK SIZE 48CM(W) X 76CM (H) , SEAT SIZE 51.0CM (W) X 48.0 CM (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM FOR SEAT AND BACK SHOULD BE MOULDED WITH DENSITY = 45 plus /- 2KG/M AND HARDNESS LOAD 16 plus _2 KGF FOR 25% COMPRESSION ARMRESTS THE ARMREST TOP SHOULD BE MADE OF POLYURETHANE (P.U.) AND THE FOLLOWING FEATURES :- 1. 360` REVOLVING TYPE 2. SINGLE POINT CONTROL 3. FRONT PIVOT FOR TILT WITH FEET RESTING ON GROUND ENSURING MORE COMFORT 4. TILT TENSION ADJUSTMENT ,5. 4- POSITION LOCKING WITH ANTI-SHOCK FEATURES , 6. SEAT BACK TILTING RATIO OF 1.2 FIXED BACKREST : THE BACKREST CONSSHOULD BE IS OF FIXED TYPE MECHANISM I.E. NO BACK UP/DOWN , PHEUMATIC HEIGHT ADJUSTMENTS THE HAS AN ADJUSTMENT OF 9.0 plus _ 0.3CM. PEDESTAL SHOULD BE FABRICATED FROM 0.2 plus _ 0.02CM THICK HR SHEET (SHOULD BE DD 1079 / HR SKIN PASS ) CHROME PLATED AND ASSEMBLED WITH INJECTION MOULDED BLACK POLYPROPYLENE HUB CAP AND 5 NOS. TWIN WHEEL CASTORS. THE PEDESTAL SHOULD BE 66.0 plus _0.5CM. PITCH -CENTER DIA ( 76.0 plus _ 1.0CM WITH CASTORS ). TWIN WHEEL CASTORS THE TWIN WHEEL CASTORS SHOULD BE INJECTION MOULDED IN CHROME PLATED.`

`Student chair DBS - 1065 Low Back Chair, PU Arm, Swivel Tilt, Gas Lift, Nylon Base.Leatherite Tapestry`

Cafteria table Dimension: 700D 700W 450H | Type: Coffee Table | Top Finish: Matt White Top | Base Finish: Matt Black | MOQ Standard

Cafteria chair Without Arms | Seat Finishes: Black | Seat Material: Steel Tube with Powder Coating | Base Finish: Black | MOQ Standard

Office table

Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b)Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS-325. (c)M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads. (1.1) 2850 lpm at 88 m Head

Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) (a) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. (c) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. (2.1) 2850 lpm at 88 m Head

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520 Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 88 m Head

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 (b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-`F` insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m Head

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 300 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 250mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 100 mm dia

Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 300 dia nominal bore.

Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 250 mm dia nominal bore.

Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 200 mm dia nominal bore

Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 100 mm dia nominal bore

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 250 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 200 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 150 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100 mm dia

Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required.

Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required : (24.3) 150mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : For Hydrants and Sprinklers 250 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : For Hydrants and Sprinklers 200 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : For Hydrants and Sprinklers 150 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : For Hydrants and Sprinklers 100 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : For Hydrants and Sprinklers 80 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : For Hydrants and Sprinklers 40 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : For Hydrants and Sprinklers 32 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : For Hydrants and Sprinklers 25 mm dia

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : (10.2) Single headed Stainless steel

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required 150 mm dia

Providing and fixing flow switch in following sizes M.S. pipe including connection etc as required. 150 mm dia

` Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket. (17.1) 30 m `

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : (16.2)Stainless Steel (Grade 304)

Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : (18.2) Stainless Steel (Grade 304)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : (19.2) 4 way - 150 mm dia M.S. Pipe

Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler

Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Upright Sprinkler

Providing, fixing, testing and commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Horizontal side wall sprinkler

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Providing and fixing of heavy duty double flanged flexicon rubber expansion joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete in all respects. 250 mm dia

Providing and fixing of heavy duty double flanged flexicon rubber expansion joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete in all respects. 200 mm dia

Providing and fixing of heavy duty double flanged flexicon rubber expansion joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete in all respects. 100 mm dia

Providing and fixing dial type pressure gauge (dial diameter 100 mm, caliberation 0-15 kg/sqcm) with ball valve and pipe at hydrant station.

Providing protection to embedded MS/ GI pipes and fittings by applying protective primer (@ 100 gm/sqm) thereafter wrapping 4 mm thick protection coating by thermo fusion process. Overlap shall be maintained at 15 mm. The application process shall be strictly according to manufacturer’s specification. (For External Hydrant pipe ) 250 mm dia

Providing protection to embedded MS/ GI pipes and fittings by applying protective primer (@ 100 gm/sqm) thereafter wrapping 4 mm thick protection coating by thermo fusion process. Overlap shall be maintained at 15 mm. The application process shall be strictly according to manufacturer’s specification. (For External Hydrant pipe ) 200 mm dia

Providing and fixing angle iron (40 mm x 40 mm x 5mm) door frame and MS sheet (2mm thick) cum glass shutter of size 2.1 mtr. X 1.2mtr. (N.S.) with 25 mm x 25 mm x 3 mm angle fram all around and stiffened in between i/c hinges, handle, locking arrangement, painting with approved synthetic enamel paint i/c sign writing on grass at internal hydrant including providing and fixing M.S.Sheet 2 mm thick on remaining portion above door to close opening i/c painting etc. as required.

Providing and fixing impact, abrasion and weathering resistant rubberised fabric lined (RRL) hose pipe conforming to IS : 636-1979 (Type -2) of 63 mm dia and 15 m length with stainless steel (grade AISI 304) instantaneous male and female couplings conforming to IS: 903-1975 (for internal hydrants)

Providing and fixing of MS Hose Box MS Construction 30”X24”10 double doors.

Providing and fixing 32 mm dia Brass/ Bronze body test and drain valve assembly including isolation valve, sight glass, Ball valve and making threaded connection with drain line (UL Listed and FM Approved).

Providing and fixing butterfly valve with supervisory switch (weather proof and temper resistant), factory assembled of approved make including a set of MS flanges, required nos. of nut and bolts all complete and as per following specification:MOC: Body - Cast Steel/ Ductile Iron Shaft - Carbon Steel / Stainless Steel Body Liner - EPDM/ nitrile rubber Disc - Epoxy coated Ductile Iron 150 mm dia

Providing and fixing fire brigade suction hose coupling (Draw-out connection) with nut for for female coupling as per I.S : 902-1974 complete with 100 mm dia. MS Suction pipe and 100 mm dia. 2 Nos. foot valve (To be connected to static fire water tanks)

Providing, installation, testing and commissioning of Air cushion tank 450 mm dia. x 1.0 M high with dished top, fabricated from minimum 6 mm thick M.S. pipe/plate complete with 25 mm dia. Brass Air Release Valve, 25 mm dia stop valve, pressure gauge type), with brass stop cock, nipple, tees, elbow, pipe and all accessories as required including fixing brackets.

Providing and fixing of ISI marked Portable Fire Extinguisher, Carbon dioxide (CO2) type of 4.5Kg capacity flat base conforming to IS: 15683 : 2006 including valve, discharge hose of not less than 10mm dia. 1m long and complete in all respect including initial fill with CO2 gas conforming to IS: 307-1966 filled to a filling ratio of not more than 0.667 and wall suspension bracket.

Providing and fixing of 4 Kg capacity ABC Type, Portable Fire Extinguisher, dry powder type (Gas Cartridge) conforming to IS: 15683 : 2006 with cylinder initially fully charged with dry powder, ISI marked confirming to IS:15683 : 2006 complete with standard discharge valve with tube, CI bracket for wall mounting.

Providing and fixing of ISI marked fire extinguisher Trolly mounted Mechanical Foam type capacity 45 liters with gunmetal cap and nozzle, trolley mounted and complete in all respects including initial fill.

Providing and fixing of ISI marked Fire and wall suspension bracket, Extinguisher, Trolley mounted carbon-dioxide type capacity 22.5 Kg. conforming to IS: 2878 Flat base including valve, discharge hose of not less than 10mm dia 1m long complete in all respects including wheeled trolley, carrying handle and initial fill with CO2 gas as per IS: 307-1996 filled to a filling ratio of not more than 0.667.

`Providing Elelctric Shock Treatment Chart of standard size duly framed and covered with 5 mm thick glass etc. complete In all respects including the cost of all petty material required to complete the job upto entire specifications of Engineer-in – charge.`

`Providing and laying antishock rubberised mat of 12mm thickness for Pump House chamber complete in all respect with 3 Year free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge.`

Supply, Installation, Testing and commissioning of Glow Type EXIT/stair /emergency exit Sign Board as finalized by Engineer In Charge photo luminescent of size 300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink Sulphate as bare chemical class – 1 material PSPA fixed on 3 mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastenerwith 3 Year free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge.

SITC of UL Listed Connectors complete with standard accessories etc.Make-NUTRIK

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Door Tees :- 110mm

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Single Tees :- 160mm

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Door bend 87.5 Degree 110MM

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Door bend 87.5 Degree 160MM

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Plain bend 50 MM

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Plain bend 110MM

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Plain bend 160MM

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` PlainTees 110MM

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Plain Y Junctions 110MM

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Double Y Junctions 110MMx110mmx110mmx110mm

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Plain Y Junctions 160MM

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Double Y Junctions 160MMx160mmx160mmx160mm

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Coupler (Socket) 110MM

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Coupler (Socket) 160MM

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Bend 45 degree 110MM

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Bend 45 degree 160MM

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` P-Trap 110 mm x 110mm

`Providing and fixing for SWR Pipes (80 mm to 150 mm) specials tees, bends, couplers, single y, cross tee, short bend etc. conforming to I.S 4985:2000 . Including the cost of carriage and all fixing labour as per entire staisfication of Engineer incharge (N.S ITEM)` Gully Trap 150mmx150mmx110mm

Providing and Fixing floor drain with jali (S.S) as per I.S-:14735:1999 marked of supreme pipe prakash pipe or equivalent make. with all accessories complete with all respects (N.S ITEM).

Pipe 50mm dia Unplasticised PVC pipe

Providing and fixing under counter rectangular basin of size 160x490x375mm (model no.CNS-WHT-WB01) of jaguar, Kohler or equivalent make. with all accessories complete with all respects (N.S ITEM)

Providing and fixing Baloon/chilly Clamp 2 to 2.5mm pati thickness with 8mm dia bullet fastner, 8mm tie rod witth Nut and washer for pipe hanging 25mm Dia

Providing and fixing Baloon/chilly Clamp 2 to 2.5mm pati thickness with 10mm dia bullet fastner, 10mm tie rod witth Nut and washer for pipe hanging for 110mm Dia pipe

Providing and fixing Baloon/chilly Clamp 2 to 2.5mm pati thickness with 10mm dia bullet fastner, 10mm tie rod witth Nut and washer for pipe hanging for 160mm Dia pipe

Providing and Fixing Sump Pump .3HP with 20 meter head with 03 years comprehansive warantiy complete with all respect.

Providing and Fixing 120 Ltr capacity water cooler Stainless steel body (grade 304) rust free with sink arrangement 2Nos outlet with brass push coak as per requirement size complete with all respect on entier Engineer In-Charge.

Providing and fixing Hand shower (Health faucet) with 1.0m long easy flex tube in chrome finish and wall hook of jaquar, Grohe, Kohler make. with all accessories complete with all respects (N.S ITEM)

Providing and fixing of straight Grab bar 300 mm long stainless steel.

Providing and fixing of U grab bar stainless steel.

Providing and fixing thin rim table top basin rectangular basin of size 525x415x140 mm of jaguar, parryware, hindware or equivalent make. with all accessories complete with all respects (N.S ITEM)

`VANITY 1300 (W) X 600 (D) X 900 (H) VANITY: STRUCTURE MADE OF 18MM THICK IN HDMR plus PRE-LAMINATED BOARD AND FRONT MADE OF 25MM THICK HDMR plus PRE-LAMINATED BOARD WITH 2MM THICK PVC EDGEBANDED FINISH LAMINATE AS PER DESIGN and SHADE.VANITY SIZE 1300W X 600D X 500MM. VANITY HAS NECESSARY HARDWARE.`

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kind of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:4:8 (1 cement :4 course sand (zone-II): 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)

`Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Details of cost for one Set`

`Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Details of cost for one Set `

`Designing, Supply and erection of DG set of capacity given below with noise controlled devices acoustic of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415 plus (-)1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over/AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover/ standard panel, making second incoming cable connection from transformer, outgoing cable connection from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for DG sets complete as per following detailed scope and specifications and directions of Engineer-in-charge. The rating should be at 1500 RPM. a) Diesel Engine b) Alternator c) Battery 24 V. d) Base Plate. e) suitable sq mm suitable core copper cable upto 40 metres. f) Tools, standard panel g) Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, frequency meter, CT`s) h) Metering set 60/5A/110V (Amp. Meter, Volt Meter) i) Overload protection for DC-1 No. j) Battery Charger 24V DC k)Copper bus bar of suitable size l) KWH meter 96 sqmm size m) Starting fuse button and key switch9on/off) n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, Dc control and other required accessories complete in all respects to the satisfaction of Engineer-in-charge` -500 KVA `

Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 TO 120 sqmm

Supply and fixing of 4.5kg C02 gas type fire extinguishe as per IS: 15683(4.5 kg.) with 3 Year free comprehensive warranty period including cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge.

SITC of Post Top LED Light 50W as per Cat. No. VSTP PT-30) fixture made of aluminum Die Cast housing with front opening PC Diffuser having IP65 protection, PF).90 , Lumen-110/w with High Efficiency LED, THD-10%, potted driver with 6kva surge Protection

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect for all heights/depths/storeys/basements etc.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

`Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. `

`Providing and fixing 25 mm X 3 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.`

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required

`Providing and fixing 25 mm X 3mm G.I. strip on surface or in recess for connections etc. as required.`

95 sqmm 3 core cable XLPE

300sqmm 3 core cable XLPE

Supply and laying of L.T Aluminium conductor 1 Core * 1000 sqmm armond cable in sand and brick 1 mtr below ground level including suitable Al. Lugs , Glands , connections complete in all respect ( NS )CCI/Havells/ICL/Grandly/Universal

Supply and laying of L.T Aluminium conductor 1 Core * 1000 sqmm armond cable in Loose in existing trench , cable tray etc. 1 mtr below ground level including suitable Al. Lugs , Glands , connections complete in all respect ( NS )CCI/ Havells/ ICL/ Grandly/ Universal/ APAR

Supply and laying of L.T Aluminium conductor 1 Core * 800 sqmm armond cable in sand and brick 1 mtr below ground level including suitable Al. Lugs , Glands , connections complete in all respect ( NS )CCI/Havells/ICL/Grandly/Universal

Supply and laying of L.T Aluminium conductor 1 Core * 800 sqmm armond cable in Loose in existing trench , cable tray etc. 1 mtr below ground level including suitable Al. Lugs , Glands , connections complete in all respect ( NS )CCI/ Havells/ ICL/ Grandly/ Universal/ APAR

Supply and laying of L.T Aluminium conductor 3.5 Core * 300 sqmm armond cable in sand and brick 1 mtr below ground level including suitable Al. Lugs , Glands , connections complete in all respect ( NS )CCI/Havells/ICL/Grandly/Universal

Supply and laying of L.T Aluminium conductor 3.5 Core * 300 sqmm armond cable in Loose in existing trench , cable tray etc. 1 mtr below ground level including suitable Al. Lugs , Glands , connections complete in all respect ( NS )CCI/Havells/ICL/Grandly/Universal

Making 200 mm dia hole by aguring for crossing of road / path etc.

Supply and laying of L.T Aluminium conductor 3.5 Core * 25 sqmm armond cable in Loose in existing trench , cable tray etc. 1 mtr below ground level including suitable Al. Lugs , Glands , connections complete in all respect ( NS )CCI/Havells/ICL/Grandly/Universal

Supply and laying of L.T Aluminium conductor 3.5 Core * 25 sqmm armond cable in sand and brick 1 mtr below ground level including suitable Al. Lugs , Glands , connections complete in all respect ( NS )CCI/Havells/ICL/Grandly/Universal

Compact Ring Main Unit : - Five Ways, 11kV, 630Amps 21kA for 3 sec., SF6 insulated Non-Extensible Compact switchgear consisting of four No. INCOMERS of Isolator Function and one No OUTGOING fixed Manual Vacuum Circuit Breaker of 630 Amps in SF6 insulated Stainless steel enclosure with self-powered series trip microprocessor base numerical over current and earth fault relay CSPR for protection. RMU-NON-Extensible (4 No. Isolator, 1 No. Vacuum Circuit Breaker - with Aluminium Busbar)-BIL 28/75kV, Temp. Range -5 Deg. C to plus 40 Deg. C and Altitude up to 1000 meter

Centering and shuttering including strutting, propping etc. and removal of form work for :Columns, piers, abutments, pillars, posts and struts

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( plus 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer`s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

25 sq mm 4 Core cable (armoured)

Bidder Name

Amount

Krishna Construction Co (GSTN-06AALFK6441Q1ZP) BID ID -1081302

SKG INFRATECH PRIVATE LIMITED(GSTN-NA)--1081303

GLOBE CIVIL PROJECTS PRIVATE LIMITED(GSTN-NA)--1081294

GLOBE CIVIL PROJECTS PRIVATE LIMITED

Krishna Construction Co

Krishna Construction Co

GLOBE CIVIL PROJECTS PRIVATE LIMITED