REPAIR REPLACEMENT IMPROVEMENT OF OLD UNSV ALLUMINIUM WIRING LIGHT FITTINGS MCB DBS EARTHING ETC FOR MD ACCN AREA INCLUDING UNIT AREA ALONGWITH MISC BR WORKS UNDER AGE EM AND AGE BR I OF GE BENGDUBI

Amount

Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and directed.

S&F 30mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) area not exc. 1.5sqm each, including cutting holes for removing the hold fast,making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, including cutting holes for removing the hold fast, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

Taking down old unserviceable shutters of any description exc 1.00 but n.exe 2.00 Sqm each complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatm moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain/decorative colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement in the frame at site as per specification & drawing. etc complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing complete all as specified Make : Rajshree/Sintex/H2O solution. Note:-The door frame to be fixed to wall using 8 x 100 mm long anchor fasteners.

S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and direcetd.

S&F 100mm Butt hinges,medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 150mm size aluminium handle cast type complete all as specified and directed.

M&L for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe -410-W(Gde-E-250) quality-A. complete all as specified and directed.

S&F steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stey, tower bolts etc. complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stey, tower bolts etc. complete without glazing bars dovetailed or welded complete all as specified and directed.

M&L for 1.25mm thick pressed steel door frame of size 105mm x 60mm with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc complete all as specified and directed.

S&F for 1.25mm thick pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc.complete all as specified and directed.

S&F Pre- painted coloured trapezoidal profiled Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding to wall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed.

S&F Pre- painted coloured plain sheet Galvalume/ Zincalume sheet with min thickness 0.50mm TCT confirming to IS - 513(AZ-150 GSM, Al Zn allay metalic coating with 550 Mpa yield stress as per AS-1397) as in roof covering/cladding to wall, fixed with self tapping screws colour exterior coat of silicon modified polyster/BHP/ XRW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer , all fixed with galvanized self drilling self tapping fastner (12-14 x 55 with EPDM seals) complete all as specified and directed.

Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for sheet glass, 4mm thick, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete all as specified and directed.

M&L for 4mm thick, Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness size quality and discription) for metal frame exc 1.5 sqm including punching, drilling out old glazing pins / spring clips and providing new ones complete all as specified and directed.

M&L for preparation of untreated new wood/wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thickness( below or above ground level) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings incl ridges, hips and valley gutter complete all as specified and directed.

Dismantling wall and ceiling board( fiber, pulp, insulation, etc.) or insulation board/slab/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for newly plastered surface of wall appying two coat of white or tinted oil bound distemper over one coat of alkali resistant priming paint including 01mm thick wall care putty etc complete all as specified and directed.

S&F 2nd class HW rail and style 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 4 mm thick Non asbestos fiber cement building boards, fixed or laid /inserted to timber /GI /Aluminium frame-work with screws as in ceiling complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of hardstanding and ramp and finishing the surface without using extra cement complete all as specified and directed.

M&L for Glazed ceramic tiles coloured 300mmx 450mm , 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface etc complete all as specified and and as directed

M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes etc complete all as specified and directed

M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes etc complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in two layers 10mm +5mm in cement mortar 1:4 on external surfaces of brick work or concrete surfaces with using WPC finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured and paid separately under respective item of this schedule.

M&L for 5mm thick rendering in cement mortar 1:3 over/soffit of chajja/ceiling, finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkai registant primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying one coat of oil bound distember over a coat of primer white or any tint over 1mm thick plaster of paris complete all as specified and directed.

M&L for preparation of new undecorated surface of ceiling and applying two coats of white wash complete all as specified and directed.

S& F powder coated GI T-section of size 1"x1" (25x25mm,19 gauge or 1mm thick) in square pattern of grid size 2'x2'(600x600mm). The frame work is supported from the ceiling with the help of "J" hook and GI wire / ms rod of 4mm dia of required size to maintain proper level etc.The frame work is supported on side walls with the use of powder coated GI L section of size 1"x1" (25x25mm) angle complete all as per manufacturer instructions, specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls directed.

Material and labour for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor drawn through and incuding medium grade PVC conduit with all accessories such as elbow, tee, bend etc, ISI marked, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including or modular metal flush box for fixing modular switch, socket etc and mild steel sunken boxes made out of 1.6 mm thick mild steel sheet metal with earth dolly and coated of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one way switch complete all as specified and directed. Note :- Switches, socket and fan regulators and modular box inner and outer cover plate to be measured and paid separately.

All as per item no 49.00 above but one bell point controlled by one bell Push

All as per item no 49.00 above but one 5 Amps socket out let point controlled by one switch on same board with other switches.

All as per item no 49.00 above but one 5 Amps socket out let point on independent board controlled by one switch.

All as per item no 49.00 above but one light point controlled by one, two way switch 5 Amps

All as per item No 49.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board.

Material and labour for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor drawn through and non metallic rigid PVC casing caping double lock system with all accessories such as elbow, tee, bend etc, ISI marked on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken boxes made out of 1.6 mm thick mild steel sheet metal with earth dolly and coated of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one way switch complete all as specified and directed. Note :- Switches, socket and fan regulators to be measured and paid separately.

All as per item no 55.00 above but one bell point controlled by one bell Push

All as per item no 55.00 above but one 5 Amps socket out let point controlled by one switch on same board with other switches.

All as per item no 55.00 above but one 5 Amps socket out let point on independent board controlled by one switch.

All as per item No 55.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board.

Material and labour for point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor drawn through in existing conduit on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken boxes made out of 1.6 mm thick mild steel sheet metal with earth dolly and coated of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one way switch complete all as specified and directed. Note :- Switches, socket and fan regulators to be measured and paid separately.

All as per item no 60.00 above but one bell point controlled by one bell Push

All as per item no 60.00 above but one 5 Amps socket out let point on independent board controlled by one switch.

All as per item No 60.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board.

Supply and fixing switch piano flush button single pole one way 5 amps, AC 240 Volts complete all as specified and directed.

Supply and fixing in repair switch piano flush button single pole one way 5 amps, AC 240 Volts complete all as specified and directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, AC 240 Volts complete all as specified and directed.

Supply and fixing in repair socket outlet flush type 5 Amps, 5 pin, AC 240 Volts complete all as specified and directed.

Supply and fixing switch piano flush button single pole one way 15 Amps AC 240 volt complete all as specified and directed.

Supply and fixing in repair switch piano flush button single pole one way 15 Amps AC 240 volt complete all as specified and directed.

Supply and fixing socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amps, AC 240 volts complete all as specified and directed.

Supply and fixing in repair socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amps, AC 240 volts complete all as specified and directed.

Supply and fixing bell push single pole, 6 Amps, AC 240 Volts, flush type complete all as specified and directed.

Supply and fixing in repair bell push single pole, 6 Amps, AC 240 Volts, flush type complete all as specified and directed.

Supply and fixing celing rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

Supply and fixing in repair celing rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

Supply and fixing electronic Fan regulator 450 watt 2 module, with 5 step type regulator complete all as specified and directed.

Supply and fixing in repair for electronic Fan regulator 450 watt 2 module, with 5 step type regulator complete all as specified and directed.

Supply and fixing ding dong Bell, AC 240 Volts,single pole complete all as specified and directed.

Supply and fixing Bell multi music type AC 240 Volts, single pole complete all as specified and directed.

Refixing paino switch of any capacity 5 /15 amps obtained from item no 46.00

Refixing socket 5 amps or 15 amps capcaity obtained from item no 46.00

Supply and fixing white finished single mounting one modular inner plate & outer top cover plate suitable for housing modular accessories with one module metal flush box complete all as specified and directed.

All as per item no. 82.00 above but suitable for 2 modules

All as per item no 82.00 above but suitable for 3 modules

All as per item no 82.00 above but suitable for 4 modules

All as per item no 82.00 above but suitable for 6 modules

All as per item no 82.00 above but suitable for 8 modules

S&F modular blank plate, I module complete all as specified and directed by Engineer-in-charge.

Supply and fixing modular Switch 10 Amps single pole, one way complete all as specified and directed.

Supply and fixing Modular Socket outlet, multi purpose, 5 Pin 10 Amps flush type complete all as specified and directed.

Supply and fixing Modular Bell push flush type,10 Amps fixed complete all as specified and directed.

Supply and fixing Modular Socket outlet, multi purpose, 6 pin 16 Amps universal socket complete all as specified and directed.

Supply and fixing Modular Switch 16 Amps single pole, one way complete all as specified and directed.

Supply and fixing modular fan regulator 150 Watt of four step type complete all as specified and directed.

Supply and fixing Modular Socket outlet 3 pin 25 Amps two module AC 230 volts complete all as specified and directed.

Supply and fixing Modular starter Switch 25 Amps two module AC 230 volts complete all as specified and directed.

Supply and fixing in repair PVC rectangular block for mounting switches, sockets ,fan regulator etc with 3 mm thick plastic laminated sheet cover of size 350 x 300 x 50 mm complete all as specified and directed.

All as per item no 97.00 above but of size 250 x 200 x 50 mm.

All as per item no 97.00 above but of size 200 x 150 x 50 mm.

All as per item no 97.00 above but of size 175 x 100 x 50 mm.

All as per item no 97.00 above but of size100 x 100 x 50 mm size.

Supply and fixing in repair pressed steel terminal rectangular sunken boxes made out of 1.6 mm thick mild steel sheet metal with earth dolly for mounting, switches, sockets, fan regulator etc including 3.00 mm thick plastic laminated sheet cover of suitable size for MS box size of 250 x 300 x 50 mm with brass screws and brass washers complete all as specified and directed.

All as per item no 102.00 above but of MS box size of 200mm X 250 mm

All as per item no 102.00 above but of MS box size of 200mm X 150 mm

All as per item no 102.00 above but of MS box size of150mm X 100 mm

All as per item no 102.00 above but of MS box size of 100mm X 100 mm

Supply and fixing in repair plastic laminated bakelite sheet cover of Hylam brand 3.00 mm thick including cutting holes for switches, sockets etc as per requirement including fixing with brass machine screws and washer for size 275 mm X 325 mm complete all as specifed and directed.

All as per item no 107.00 above but of size 225 mm X 275 mm

All as per item no 107.00 above but of size 225 mm X 175 mm

All as per item no 107.00 above but of size 175 mm X 125 mm

All as per item no 107.00 above but of size 125 mm X 125 mm

Supply and fixing double door TPN DBs 4 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed.

Supply and fixing double door SPN DBs 12 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed.

Supply and fixing double door SPN DBs 8 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed.

Supply and fixing double door SPN DBs 4 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed.

Supply and fixing single door SPN DBs 2 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed.

Supply and fixing MCB SPN 5 to 32 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

Supply and fixing MCB SPN 40 to 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed.

Supply and fixing MCB TPN 50 to 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed.

Refixing MCB TPN/SPN/SP any size, capacity obtained from item no 46.00

S & F for energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed.

S & F for energy efficient exhaust fan of 230 mm sweep made of sturdy Engineering Plastic Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed.

S & F for energy efficient exhaust fan of 200 mm sweep made of sturdy Engineering Plastic Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed.

Supply and fixing LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified.

supply and fixing LED tube rod 18/20 watt 230 volt T8 type complete with electric electronic driver incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified.

S & F in replacement Building security LED light luminaire 1X25 W, pressure die cast housing with toghned glass, 240V, efficacy Min 110 Lm/Watt, IP-66, 5 KV external SPD , THD<10%, PF>0.95, CCT-5700K, High power SMD LEDs with LDR sensor working 10 Lm visibility for automatic ON/OFF operation and including cable for connection from celling rose with 1.5 Sqmm 3 Core PVC insulated stranded copper conductor (FRLS) cable including GI bracket medium grade bent to shape etc all as specified and directed.

Supply and fixing LED Batten light Aluminium Housing 18/20 watt 230 volt T8 type complete with electric electronic driver incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified.

Refixing LED tube light fittings any type, wattage and any size obtained from item no 45.00

Supply and fixing LED batten tube light fitting 1x 10 watt 230 volt wall/ ceiling mounted luminaire with polycarbonate hoiusing and integrated electronic driver with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified.

Supply and fixing Wall light fixture lantern made of metal with chrome finish with white colour pvc diffuser withB-22 base including connection with all necessary accessories complete all as specified and directed.

Supply and fixing in repair Energy Savings Long Life 6 Watt 230 Volts 50 Hz, IP20 rating recessed mounting downlight with aluminium housing and heat sink for better thermal performance and morden and minimalist design with flushed diffuser and as per site requirement ceiling cutout fitting for warm or natural white light options including electronic driver of suitable capacity with PF>0.9 complete all as specified and as directed.

Supply and fixing in repair Energy Savings Long Life 12 Watt 230 Volts 50 Hz, IP20 rating recessed mounting downlight with aluminium housing and heat sink for better thermal performance and morden and minimalist design with flushed diffuser and as per site requirement ceiling cutout fitting for cool/warm or natural white light options as required including electronic driver of suitable capacity with PF>0.9 complete all as specified and as directed.

Supply and fixing in repair Energy Savings Long Life 15 Watt 230 Volts 50 Hz, IP20 rating recessed mounting downlight with aluminium housing and heat sink for better thermal performance and morden and minimalist design with flushed diffuser and as per site requirement ceiling cutout fitting for cool/warm or natural white light options as required including electronic driver of suitable capacity with PF>0.9 complete all as specified and as directed.

Supply and fixing in repair Energy Savings Long Life 15 Watt 230 Volts 50 Hz, IP20 rating surface mounted downlight with die cast aluminium housing with white powder coated and heat sink for better thermal performance and morden and minimalist design of flushed diffuser for cool/warm or natural white light options as required including electronic driver of suitable capacity with PF>0.9 complete all as specified and as directed.

S&F recessed mounting fitting 1 x 36/42 watt ultra modern design Natural white/ Warm white architectural LED luminaire (2X2) feet which provides soft-light and glare free symmetrical illumination suitable for Armstrong / Grid Ceiling including LED driver and 36/42 watt LED for cool/warm or natural white light options as required including electronic driver of suitable capacity with PF>0.9 complete all as specified and as directed.

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and directed.

S&F in replacement Lamp holder , PVC / Polycarbonate type with back plate suitable for B22 lamp including LED Bulb 9W complete all as specified and directed.

M&L for Sub main wiring two run single core PVC insulated unsheathed cable FRLSH 1100 volts grade, 6.00 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including one run of 4.00 Sqmm single core PVC insulated, unsheathed cable FRLSH 1100 volts grade with multi stranded copper conductor green colour as earth continuity conductor cable connected to earth dolly complete all as specifed and directed.

All as peritem No 139.00 but with two single core 4.0 Sqmm size with 2.5 Sqmm cable as earth conductor complete.

All as peritem No 139.00 but with two single core 2.5 Sqmm size with 2.5 Sqmm cable as earth conductor complete.

All as peritem No 139.00 but with two single core 1.5 Sqmm size with 1.5 Sqmm cable as earth conductor complete.

M&L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles. Pipe hooks,couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbed surfaces in repairs all directed.

M&L for Rigid non metallic PVC casing caping ISI marked, medium grade,not less than 25 mm base size inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles hooks,couples and lock outs etc fixed on surface mounted complete and making good disturbed surfaces in repairs all directed.

Supply & fixing Sheet metal earth plug, socket, single pole and neutral with single pole MCB 32 Amps 240 volts fixed in repairs complete.

Supply and fixing of Earthing to building with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth strip 25x4mm by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 1,72,938.40 (refer Tender Srl Page No 34). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

M/S GURUNG CONSTRUCTION (BID ID -3435178)

MESSERS BEE GEE CONSTRUCTION (BID ID -3432183)

KAMALA INDUSTRIES (BID ID -3434317)

M/S UTTAM ENTERPRISES (BID ID -3435182)

MS CHOWDHURY ENTERPRISE (BID ID -3435367)

NAYAK BROTHERS (BID ID -3435168)

TECHNOSOFT (BID ID -3432985)

Bidder Name

MESSERS BEE GEE CONSTRUCTION