Augmentation and facility enhancement of crew and train manager lobbies under ADEN BSB in the jurisdiction of Sr. DEN-III/LKO.

LUCKNOW-NR-DIVISION-ENGINEERING/NORTHERN RLY Please see Item Breakup for details. 277764.25 (-) 11.54 245710.26 12 Description:- SH: 21.0 (ALUMINIUM WORK) Please see Item Breakup for details. 51100.00 (-) 11.54 45203.06 13 Description:- SH: 26.0 (NEW TECHNOLOGIES AND MATERIALS) S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () B-All Items of USSOR-2010 (inclusive all taxes with GST @ 18%) 497753.74 Below/P ar Please see Item Breakup for details. 382173.75 26.66 484061.27 01 Description:- Chapter no: 10 (ROOFING AND CEILING) Please see Item Breakup for details. 10275.00 33.26 13692.47 02 Description:- Chapter no: 15 (SANITARY INSTALLATION) S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Above/ Schedule () C-All NS Items (inclusive all taxes with GST @ 18%) 300213.90 Below/P ar Please see Item Breakup for details. 300213.90 AT Par 300213.90 01 Description:- All NS Items

DSR-2021/ 8727 laminated sheet Total 14700.00 Item- 02 SH: 6.0 (MASONARY WORK) S No. Item Description of Item Unit Qty Rate Amount No

DSR-2021/6.4.1 : Brick work with common burnt cum clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) Total 85121.00 Item- 03 SH: 8.0 (CLADDING WORK) S No. Item Description of Item Unit Qty Rate Amount No

DSR-2021/ 8.31 : Providing and fixing Ist quality Sqm ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Total 106345.00 Item- 04 SH: 9.0 (WOOD AND P.V.C. WORK) S No. Item Description of Item Unit Qty Rate Amount No LUCKNOW-NR-DIVISION-ENGINEERING/NORTHERN RLY

DSR-2021/ 9.7.6.1 : "Providing and fixing panelling Sqm or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :" Coir Veneer Board (conforming to IS 14842) 12 mm thick

DSR-2021/ 9. 62. 2 : Providing and fixing ISI Each marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378) 250x16 mm.

DSR-2021/ 9.66.1 : "Providing and fixing ISI Each marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (copper oxidized as per IS: 1378)" 125 mm.

DSR-2021/ 9.147.A1.1 : "Providing and fixing Sqm factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi- chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 (ii) Sites with structure height more than 20m for all wind speeds" Two track two panels slidingwindow with Aluminiumchannel for roller track, woolpile, nylon rollers with SS 304body. Using R2 series with frame(40mm & above) x (40mm &above) & sash (25mm & above)x (50mm & above) with zincalloy (zamak) powder coatedtouch locks with hook (Heightupto 1.2 meter). LUCKNOW-NR-DIVISION-ENGINEERING/NORTHERN RLY

DSR-2021/ 9.147.F1.1 : "Providing and fixing Sqm factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi- chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 (ii) Sites with structure height more than 20m for all wind speeds" "Casement door single panelwith zinc alloy (zamak) 3Dhinges, multi-point lockingsystem with cylinder, zincalloy (zamak) powder coatedhandles on both sides. " Using R3 series with frame(55mm & above) x (50mm &above) & sash (55mm & above)x (85mm & above) (Height upto 2.5 meter). Total 1023571.80 Item- 05 SH:10.0 (STEEL WORK) S No. Item Description of Item Unit Qty Rate Amount No

DSR-2021/ 10.25.2 : Steel work welded in built up Kg sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. LUCKNOW-NR-DIVISION-ENGINEERING/NORTHERN RLY

DSR-2021/ 10.28 : Providing and fixing stainless Kg steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Total 845550.00 Item- 06 SH:11.0 (FLOORING) S No. Item Description of Item Unit Qty Rate Amount No

DSR-2021/ 11.41.2 : Providing and laying vitrified Sqm floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

DSR-2021/ 11.56.2 : "Providing and laying Polished Sqm Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge." "Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red " Total 614182.50 Item- 07 SH: 13.0 (FINISHING) S No. Item Description of Item Unit Qty Rate Amount No

DSR-2021/ 13.4.1 : 12 mm cement plaster 1:4 (1 Sqm cement : 4 coarse sand).

DSR-2021/ 13.26 : Providing and applying plaster Sqm of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

DSR-2021/ 13.48.1 : Finishing with Deluxe Multi Sqm surface paint system for interiors and exteriors using Primer as per manufacturers specifications : " Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm"

DSR-2021/ 13.91 : Removing dry or oil bound Sqm distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Total 687127.32 Item- 08 SH: 15.0 (DISMANTLING AND DEMOLISHING) S No. Item Description of Item Unit Qty Rate Amount No LUCKNOW-NR-DIVISION-ENGINEERING/NORTHERN RLY

DSR-2021/ 15.7.4 : Demolishing brick work cum manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material In cement mortar.

DSR-2021/ 15.23.1 : Dismantling tile work in floors Sqm and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm

DSR-2021/ rubbish/malba/similar unseviceale,dismantled or waste materials by mechanical means, including loading, transporting unloading to approved municipal dumping ground or as approved by Engineer -in-charge, beyond 50m initial lead, for all leads including all lifts involved. Total 130390.40 Item- 09 SH: 16.0 (ROAD WORK) S No. Item Description of Item Unit Qty Rate Amount No

DSR-2021/16.91.2 : Providing and laying factory Sqm made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. Total 151680.00 Item- 10 SH:17.0 (SANITARY INSTALLATIONS) S No. Item Description of Item Unit Qty Rate Amount No

DSR-2021/ 17.1.1 : Providing and fixing water Each closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

DSR-2021/ 17.4.1 : Providing and fixing white Each vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

DSR-2021/ 17.7A (a) : Providing and fixing wash Each basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

DSR-2021/17.29 : Providing and fixing 100 mm Each sand cast Iron grating for gully trap. LUCKNOW-NR-DIVISION-ENGINEERING/NORTHERN RLY

DSR-2021/ 17.31 : Providing and fixing 600x450 Each mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

DSR-2021/ 17.81 : Providing and fixing floor Each mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Total 89618.10 Item- 11 SH: 18.0 (WATER SUPPLY) S No. Item Description of Item Unit Qty Rate Amount No

DSR-2021/ Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal dia Pipes

DSR-2021/ Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes

DSR-2021/ 18.21.2.1 : Providing and fixing Each uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

DSR-2021/ 18.49.1 : Providing and fixing C.P. brass Each bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

DSR-2021/ 18.51.1 : Providing and fixing C.P. brass Each long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

DSR-2021/ 18.53.1 : "Providing and fixing C.P. Each brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931" 15mm nominal bore. Total 83521.00 Item- 12 SH: 21.0 (ALUMINIUM WORK) S No. Item Description of Item Unit Qty Rate Amount No LUCKNOW-NR-DIVISION-ENGINEERING/NORTHERN RLY

DSR-2021/ 21.1.1.2 : Providing and fixing Kg aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

DSR-2021/ 21.1.2.2 : Providing and fixing Kg aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)

DSR-2021/ 21.2.2 : Providing and fixing 12 mm Sqm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge. "Pre-laminated particle board with decorative lamination on both sides"

DSR-2021/ 21.3.2 : Providing and fixing glazing in Sqm aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness Total 277764.25 Item- 13 SH: 26.0 (NEW TECHNOLOGIES AND MATERIALS) S No. Item Description of Item Unit Qty Rate Amount No LUCKNOW-NR-DIVISION-ENGINEERING/NORTHERN RLY

DSR-2021/ 26.86.4 : "Polymer Composite) solid Metre door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threadedstar headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer- In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made." Frame size 50 x 125 mm.

DSR-2021/ 26.87.1 : Providing and fixing factory Sqm made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick. Total 51100.00 Schedule Schedule B-All Items of USSOR-2010 (inclusive all taxes with GST @ 18%) Item- 01 Chapter no: 10 (ROOFING AND CEILING) S No. Item Description of Item Unit Qty Rate Amount No

USSOR-2010/ 106080 : Providing & fixing PVC Sqm multiple hollow section of approved colour with tongue and groove fixture having wall thickness 1mm and overall thickness 12mm in ceiling on existing frame work Total 382173.75 Item- 02 Chapter no: 15 (SANITARY INSTALLATION) S No. Item Description of Item Unit Qty Rate Amount No

USSOR-2010/ 154010 : Providing and fixing Metre 110mm dia PVC soil, waste and vent pipes including jointing and cost of spun yarn and sand etc. complete Total 10275.00 Schedule Schedule C-All NS Items (inclusive all taxes with GST @ 18%) Item- 01 All NS Items LUCKNOW-NR-DIVISION-ENGINEERING/NORTHERN RLY S No. Item Description of Item Unit Qty Rate Amount No

NS-01 : Providing & Fixing of wall partition with 12 Sqm mm thick toughened Glass pannel ( Frosted/Plain/Striped Frosted etc ) including all fitting, brackets etc for the fixing of glass with floor, wall, ceiling etc including provision of doors as per site requirement and including all fittings related to fixed the doors in the partition wall. nothing shall be paid extra. Total 300213.90