CONSTRUCTION OF INDOOR BADMINTON COURT IN BHISHMA CLUB PREMISES AT HVF ESTATE

Amount

Earthwork excavation in hard/dense soil in trenches width and depth not exceeding 1.50 m and getting out.

Earth work excavation in trenches exceeding 1.5m and not exceeding 3.0 m in width and depth and getting out in hard/dense soil.

Material and labour for sand filling in foundation including watering and consolidation.

M & L for P.C.C 1:4:8, D2 type using 40mm graded aggregate in foundation.

Material and Labour for Providing Anti-termite along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc., in apron, complete all as directed by EIC.

Material and Labour for providing Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors.

M & L for R.C.C A1 Type, 1: 1.5: 3 M20, 20mm graded aggregate in foundations, including rafts, footings, column, beam, plinth beams, roof slab etc.,

Supply and fixing of twisted MS Bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spiraling for hoping for columns, hooking ends and binding with MS Wire not less than 0.9mm dia or securing with clips.

Supply and fixing of deformed or twisted MS Bars 6mm dia up to 8mm dia cut to length bent to shape required including cranking, bending, spiraling for hoping for columns, hooking ends and binding with MS Wire not less than 0.9mm dia or securing with clips.

M & L for form work to side of RCC Members, Square/rectangular /polygenal such as columns, pillars etc., and the finishing shall be of fair finished surface.

M & L for Brick work built in CM.1:6 using Good quality modular bricks / solid Concrete bricks. Bricks straight or curved on plan exc 6m mean radius.

M & L for plastering in CM 1:4, 15mm thick on fair faces of brick work and concrete wall surfaces.

Supply and fixing of Sheet glass ordinary quality 5.50mm thick and glazing with oil putty in square not exceeding 0.5 sq.m in each pane.

Supply and fixing of plain solid straight chowkats and frames, wrougth framed rebated on the solid rounded or chamfered put together, with glue pinned at joints of 2nd class hardwood as directed by EIC.

Supply and fixing of 30 mm thick Flush door shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides and in both faces.

Supply and Fixing of Brass Butt hinges type B-12 of 125mm length.

Supply and Fixing of brass barrel tower bolts with barrel of extruded section and rolled or cast bolts and fixed 200mm long.

Supply and Fixing of Extruded Brass Handles fabricated type polished of 150mm length.

Supply and Fixing of Brass door stopper 150mm length.

Supply and fixing of framed work using Fe410 W(Gde-E- 250) A, quality, mild rolled steel tube, angles, plates etc., inculding cutting , welding etc., complete as directed by EIC.

Supply and fixing of Door closure hydraulically regulated designation No.3 universal or hard drawn type of Aluminum extruded body.

Excavation of Hard/dense soil / moorum / red bajiri from borrow pits for floors or pavings, Removal of excavated soils lead exceeding exc. 1.50 km but n exc. 5 km and depositing where directed and refilling of soil / loose including spreading, laid in layers n exc. 15 cm thick leveling, watering and well ramming in layers where directed.

M & L for painting to wooden surfaces of any description over 10cm width or girth with Two coats of synthetic enamel paint. including preparing new wooden surfaces.

Material and labour for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as direced by EIC.

Material and Labour for Providing edge moulding for Granite stone of 18-20mm thick stone of counters vanities etc., including machine polishing to edge to give high gloss finish etc., complete.

S& F of Glazed colored ceramic tiles in vertical surface 450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. Including Screed bedding 1:4, 15mm thick for laying floor finishes.

Material and labour for applying two coats of Plastic emulsion on internal wall surfaces including preparation of new wall surfaces complete all as directed.

M&L for painting two coats of exterior emulsion Asian paints (Apex Ultima supreme or Apex ultima) Berger paints ( weather coat all guardi) Nerolac paints ( Excel total ) or suitably equivalent make, including one coat of priming paint applies after preparation of the new existing treatment.

Design, manufacture, supply and erection of pre-fabricated metal building, metal roof system, wall system, supply and fixing of day lighting panels, insulation, trims and accessories as required for the Badminton Court of size 10.35 m x 20.0 m C/C at HVF Officers Mess at HVF Estate. a) Type of Building shall be Pre-fabricated steel building for Badminton court of size 10.35m x 20m C/C. b) Roof slope shall be 1:10. c) The length of the building shall be of size 20.0m C/C, width of size 10.35m C/C and Eave height [Clear] shall be of size 8.0m (at low end). d) The bay spacing shall be of 6EQ spacing. e) The roof shall be convered with 26 Guage 345 Mpa, AZ 150 Bare Galvlume profiled sheets. f) The walls shall be of sheeted above 2.10 m brick wall (by others) with 26 Gauge 345 Mpa colour coated galvalume AZ 150 profiled sheets including Fascia, Partition wall, gutter and downspouts. g) The building shall be provided with sheeting accessories like Ridge caps, Standard fasterners, filler strip, rope seal and flashing including gutter and down spout as per specifications and standards. h) The Anchor bolts shall be used as per the design. i) The rod/angle bracing shall be done on the roof and wall as required and directed. j) 6 Nos. of wall lights 1 m x 4 m shall be provided as required and directed.

Supply and fixing of wooden Badminton flooring structure as per DIN STANDARDS as given below and as directed by the E-I-C. a) Top Surface with Pre Finished planks with of UV Stabilized Lacquer. Top surface shall be Teak Wood flooring planks of size 1830mm x 129mm x 20mm. The top surface sports the prefinished planks and are 1830 mm in length. The planks should have tongue and groove on all four sides and are inter lockable. The timber should be specially treated chemically against termites, fungus and all natural enemies of timber before incorporating into the work. It should be free from any warping etc., permanently. The surface has to be prefinished of the plank shall be of UV stabilized lacquer and one coat at the bottom. b) Batten System - Pinewood. Batten System - Scantlings of pinewood of size 72mm width x 36mm depth x whole breadth. The battens should have special slits as per DIN Specification to receive the top surface planks. c) Bottom support blocks Bottom support blocks - 200mm x 72mm x 25mm as specified in DIN Standard. d) Poly Sheet underlay for moisture prevention Poly Sheet should be used as an underlay and for the entire area of the court to prevent moisture from underneath. e) Line marking should be done with imported paint.

Material and labour for Point wiring with 1.5sqmm FRLS PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall/ roof/L angle including M.S. switch box concealed in the wall(made out of 2mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 16SWG bare or 1.5/2.5 stranded copper earth continuity wire. (Make: Finolux/ Havells/ Polycab/ Kundan or Suitably Equivalent make) a)One light point or one fan point controlled by one switch with cables 1.5 sq. mm size

Material and labour for Point wiring with 1.5sqmm FRLS PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall/ roof/L angle including M.S. switch box concealed in the wall(made out of 2mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 16SWG bare or 1.5/2.5 stranded copper earth continuity wire. (Make: Finolux/ Havells/ Polycab/ Kundan or Suitably Equivalent make) b)One 3 pin socket outlet 5 amps on the same board with other switches, with cables 2.5 sqmm Size

Material and labour for Point wiring with 1.5sqmm FRLS PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall/ roof/L angle including M.S. switch box concealed in the wall(made out of 2mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 16SWG bare or 1.5/2.5 stranded copper earth continuity wire. (Make: Finolux/ Havells/ Polycab/ Kundan or Suitably Equivalent make) c)One 3 pin socket outlet, 5 amps, independent, with cables 2.5sqmm cable

Supply, fixing and connecting to the system modular type switches 10A, 1 Module. (Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably Equivalent make)

Supply, fixing and connecting to the system of socket, 6A-2/3 pin combined modular type 2 module(Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably Equivalent make)

Supply, fixing and connecting to the system modular type switch one way 16A, 1 module (Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably Equivalent make)

Supply, fixing and connecting to the system of socket, 6/16A-2/3 pin combined modular type 2 module(Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably Equivalent make)

Material & Labour for ceiling rose, 3 Phase / PVC / polycorbonate , isolated body (ANCHOR / LEGRAND/ HAVELLS or Suitably Equivalent make)

Supply & fixing of modular white cover plate with frame 2 module

Supply & fixing metal flush box for 2 module plate

Supply & fixing of 4 module modular white cover plate with frame

Supply & fixing of metal flush box for 4 module plate

Supply & fixing of 6 module modular white cover plate with frame

Supply & fixing of metal flush box for 6 module plate

Supply & fixing of 8 module plate with frame

Material & Labour for wiring with two runs of FRLS PVC insulated sheathed single core copper cable upto 1100 volts grade confirming to IS 694 multistrand with copper conductor along with PVC conduit and conduit accessories run on wall/roof one run of copper cable as earth wire. (Make: Finolux/Havells/Polycab/ Kundan or Suitably Equivalent make) a) 2x2.5 sq.mm+1x2.5 sq.mm earth wire

Material & Labour for wiring with two runs of FRLS PVC insulated sheathed single core copper cable upto 1100 volts grade confirming to IS 694 multistrand with copper conductor along with PVC conduit and conduit accessories run on wall/roof one run of copper cable as earth wire. (Make: Finolux/Havells/Polycab/ Kundan or Suitably Equivalent make) b) 2x4.0 sq.mm+1x4.0 sq.mm earth wire

Material and labour for Brick walls cutting chases,pining in, making good to facing where required and pointing in cement mortor 1:3 to ends and cutting chases for concealed conduit wiring, etc., and making good,cutting exc. 10 cm but not exc. 20 cm grith.

Demolition of cement concrete of any description and in any position

Material and labour for cement concrete 1:2:4 Type B1 using 20mm graded aggregate in foundations, filling and mass concrete.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.Make: PHILIPS / CG /Havells / Wipro / Klite/ Bajaj/ Luker or Suitably Equivalent make)

Brick work with subclass 'B' bricks straight/curved on plan exc 6m mean radius built in (Cement mortar 1:4)

Rendering 10mm thickness on fair faces of brick work or concrete surfaces. (cement plaster 1:4)

Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 50 sqmm, 3.5 core.

Supply & fixing of MCCB 3 pole 415 Volt, fixed type 125 Amps, with breaking capacity 16KA. Make:Legrand/ Havells/ ABB or Suitably Equivalent make)

Excavating of Hard/Dense soil in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cable.

Material & labour for sand filling for cushioning on U.G cable

Materal &labour for Bricks; common burnt clay building bricks sub class B designation 75 for protection to U.G cable

Returing, refilling of Hard/ Dense soil in the excavated trench after laying of power cable including spreading levelling, watering and well ramming in layers not exc 25 cm.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make: PHILIPS /GE/ WIPRO /CG/ OSRAM / BAJAJ/ HAVELLS/ SYSKA or Suitably Equivalent make)

Supply & fixing of galvanised steel tubes, medium grade 32 mm dia

Supply & fixing of galvanised steel tubes, medium grade 80 mm dia

Supply, fixing & connecting of the system cable end termination of size 50 sqmm 3.5 core including with double compression suitable cable gland & lugs.

Supply, fixing & connecting of the system cable end termination of size 120 sqmm 3.5 core including with double compression suitable cable gland & lugs.

Supply and fixing of LED lights fitting 36 watts, 220V, 1200 MM, 5700 K, AC decorative box type with driver, including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete and fixing with suitable bracket on structure/wall. Make:Havells model Techzone TZLR36WLED857SPSWH1195 or equivalent of PHILIPS / CG /Wipro / Klite/ Bajaj/ Luker or Suitably Equivalent make)

Supply, fixing & connecting of the system cable end termination of size 35 sqmm 3.5 core including with suitable cable gland & lugs.

Supply, fixing & connecting of the system cable end termination of size 25 sqmm 4 core including with suitable cable gland & lugs.

Supply & fixing of MCBDB 4 way (DPX160+12) legrand make as per legrand 2022 catalogue No.507745 or Suitably Equivalent make)

OUT DOOR FPB consisting of 200A MCCB-1 No for incomiong, outgoing feeders are 63A MCCB-6 Nos. Specifcation sheet enclosed as Annexure -1 (1.0.1 to 1.0.9.5).

Supply, fixing and connecting to the system modular type switch one way 20A, Single pole 2 module. (Make:LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably Equivalent make).

Supply & fixing metal flush box for 8 module plate.

Supply & fixing of modular type Dummy plate.

Intex Space Solutions Private Limited (BID ID -753709)

VIJAYALAKSHMI ENETERPRISES (BID ID -748752)