CERTAIN REPAIRS TO FLOORING PLASTERING TILING AND MISC WORKS IN OTM ACCN OF OFFICER RATION STAND ORS BUTCHERY AND MD ACCN OF SUBRAMANIAM LINE FODDER LINE CMP LINE CAPTAIN LINE IN THE AREA OF AGE BR II UNDER GE WEST DELHI CANTT 10

Amount

Dismantling floor, hearth or wall tiling incluidng cement mortor bedding (but not backing) removal of rubbish beyond MOD land complete all as specified and directed.

M&L Glazed ceramic tiles joint free coloured of size 450x300x7mm thick on vertical surfaces of walls such as skirting dado etc, jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick screed bed backing coat in CM 1:4 complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 600mm x 600mm 7to 8mm thick (square/ rectangular) in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 400mm x 400mm 7to 8mm thick (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 300mm x 300mm 7to 8mm thick (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and n.exc 2 sqm each and refixing in same opening complete all as specified and directed

Demolition of lime concrete of sunken floors n.exc 15cm thick (below or above ground level) including indian type WC removal of rubbish beyond MOD land complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 (40 mm graded stone agg) as in sunken floors complete all as specified and directed.

Taking down cement plaster of any description and material and labour for rendering 10 mm thiick in CM 1:4 laid to achieve slope with two coat of tapcrete mixed (1:2) with cement slurry @ 500 gm per sqm as per manufactures's instruction in sunken potion of toilets, finished even and smooth without using extra cement, applying a coat of bitumen primer @ 0.70 kg /sqm, applying one coat of hot bitumen 85/25 gde @ 2.6 kg/sqm and one layer of 0.5 mm thick fibre tissue over it, a coat of hot blown bitumen 85/25 gde @ 2.6 kg/sqm over it and then applying one layer of 0.50mm thick fibre glass tissue and final layer of hot blown bitumen 85/25 gde @ 2.0 kg/sqm, complete all as as specified and as directed.

Demolition of Water closet (Squatt pattern) including 'P' trap including rubbish off the premises complete all as specified and directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including CI 'P' Trap & 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.

S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket/rawl plug with screws & washers complete all as specified and directed.

Taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc cincluding rubbish off the premises complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. including removal off rubbish beyond MOD land complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

All as per srl item No 15 above but except bricks.

M&L Brick work with sub class 'B' bricks staight or curved on plan to any radious in half brick thick wall built in CM 1:6 etc complete all as specificed and directed.

M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & fair on brick/concrete surfaces complete all specified and directed.

M&L 15mm thick rendering on concrete surface in cement mortar (1:4) surface finished even and smooth without using extra cement complete all as specificed and directed.

M&L 5 mm thick rendering in CM 1:3 of ceiling finished fair even and smooth without using extra cement complete all as specificed and directed.

M&L for applying wall care putty not less than 1mm thick on walls to smooth surface complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L preparation of surfaces and applying two coat of cement base paint over a coat of primer on external surfaces complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for concerete all as specified and directed.

Taking down door/window frames (steel/wooden) with shutters not exc 1.50 sqm each (without taking off shutters from frame) complete all as specified and directed.

Taking down door/window frames (steel/wooden) with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) complete all as specified and directed.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium three track window, shutter frame (Size 45X15mm) i.e. two shutter with 4.8mm thick tinted glass and one with stainless steel wire cloth of 0.36mm dia and avg width of apperture 1.40mm and sliding section confirming section Cat No 20814 (From jindal) and frame (Chowkhat) size 101.60X44.45X1.90mm thick including all locking arrangement complete all as specified and directed.

S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars complete all as specified conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm wood grain printed PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications complete all as specified and adirected.

S&F factory made PVC moulded door shutter 28 to 30mm thick (styles) with 2,4 or 6 raised panles design with 2mm thick 3D wood grain moulded PVC sheets pollyurethane painted on the front face and 2mm plain colour PVC sheets on back face complete all as specified and directed.

M&L for powder coated aluminium ventilator, openable, top hung and bottom portion fixed type without sash bars with aluminium section of weight 0.55 kg/RM including glazing, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and top hung shutter fixed hook & eye minimum one no on each shutter, one no aluminium tower bolt 100mm long and 75mm long aluminium handle in each shutter etc. complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section, frame work for chajja with gusset plates, rails, cooler stand, braces etc complete drilled for fixing of steel sheeting or other covering. confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone Aggregate) as in bed blocks for hold fast complete all as specified and directed.

S&F 35mm thick plain framed panelled shutters (any number of panels) with lock rails in IInd class HW and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces etc complete all as specified and directed.

S&F 35mm thick flush shutter solid core construction with block board core and plywood face panels,comercial type on both sides complete all as specified and directed.

S&F glazed skelton shutter IInd class hard wood 35 mm thick rebated and prepared to received glass, gauge etc (with sash bars) edges of forming plain,chamfered or rounded fitted with mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8,clause 8.24(a) etc.complete all as specified and directed.

S&F 19/20 mm thick Medium Density Fibre board (MDF), Pre laminated exterior grade both side laminated board in cup boards etc including 19 x 3mm lipping/beading all round shutters complete all as specified and directed.

M&L in repair 18/19mm thick Particle board for cupboard shutter/shelves etc including lipping/ beading all around shutters complete all as specified and directed.

S&F 1.00 mm thick plain black mild steel sheeting in as in door shutter covering including, welding or soldered joint complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width or aperture1.40mm fixed with tinned tack or stainless steel wire staple complete all as specified and directed.

S&F 100 mm stainless steel butt hinges medium weight fixing with stainless steel screw complete all as specified and directed.

S&F 150mm aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 125mm aluminium handles cast type anodised ISI Marked complete all as specified and directed.

S&F 75mm long butt hinges medium weight cold rolled MS welded to pressed steel/angle iron frames complete all as specified and directed.

S&F butt hinges 100mm long medium weight cold rolled MS to pressed steel/angle iron frames complete all as specified and directed.

S&F 250mm MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 200mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete including necessary welding if required complete all as specified and directed.

S&F hasp and staple size 75mm safety type, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces exc 10mm girth including preparation of surfaces complete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of pink primer on wooden surfaces of girth exc 10cm, including preparation of surfaces complete all as specified and directed.

S&F with 3mm thick ordinary sheet glass fixed with clips and putty complete in squares not exc 0.50 sqm each pane and including hacking out old broken glass of any description from wood/steel frame fixed with clips and putty complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia or wire and an average width aparture 1.40 mm and fixed with tinned tack/stainless steel wire stapple with screws to wooden beads to wooden joinery, (Cost of wooden beads / flat iron beads included in the rate), complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar etc including removal off rubbish beyond MOD land complete all as specified and directed.

Demolition of reinforced cement concrete as in Chajja, Kitchen slab, Chullah hood, chimney portion, Man hole cover and similar work n.exc 15cm thick including removal off rubbish beyond MOD land complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), rough finished surfaces of concerete all as specified and directed.

M&L for reinforced cement concrete using type B-1, 1:2:4 (20mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like concerete all as specified and directed. (Note:- Steel reinforcement bars shall be measured and paid separately under relevant items)

M&L black granite not less than 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms size not exceeding 1.5sqm and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including screed bed of 20mm thick in cement mortar (1:4) including rubbing and polishing complete all as specified and directed.

S&F for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L kota stone slab 18-20 mm thick one piece area not exc 1.00 sqm in tread and riser of steps, skirting, dado and pillers laid over 20mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polishing complete all as specificed and directed.

S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Angle valve) with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair bib taps, chromium plated fancy type cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe complete all as specified and directed.

S&F in repair brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair tubular towel rails 20mm dia, D type 60mm long between flanges of brass chromium plated complete all as specified and directed.

S&F in repairs PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550X400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F 15mm bore dia Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly-nuts screwed for iron pipes complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel thickness of sheet not less than 0.8mm for kitchen with plugs, washers and waste including bedding in cement mortar 1:4 to dwarf wall or including fixing cantilever, brackets and connecting union to pipe over all size 915mm X 460 mm, bowl size 410 mm x 330 mm x 160mm complete all as specified and directed.

All as per item No 70 but size 495mmX420mm bowl size 410mmX330mmX16mm complete all as specified and directed.

S&F 32mm dia CP waste coupling suitable for wash hand basin and sink complete all as specified and directed.

S&F 32mm dia flexible waste pipe 0.90 m long complete all as specified and directed.

S&F in repair CP grating 100mm dia round hole/without hole fix on floor/ nahani trap fixed with cement paste, complete all as specified and directed.

S&F in repairs stainless steel plate rack made of thickness of sheet not less than 0.80mm of size 750x750x250mm fixed to wall with suitable rawl plug and screws complete all as specified and directed.

S&F in repair 28mm dia MS drapery curtain rod with coloured PVC coated including bracket, holder etc all necessary fittings as per site requirement complete all as specified and directed.

M&L for welding in repair in any situation and in any position to steel door, gates, window, ventilatiors and grills etc complete all as specified and directed.

Taking up or down 15 mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor complete all as specified and directed.

S&F 15 mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in complete all as specified and directed.

Fixing only tubes 15 mm bore any grade to walls and ceiling or laying in floors complete all as specified and directed.

Taking up or down 20 mm bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor complete all as specified and directed.

S&F 20 mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in complete all as specified and directed.

Fixing only tubes 20 mm bore any grade to walls and ceiling or laying in floors complete all as specified and directed.

S&F in repairs salt glazed stone ware gully traps 150 x 150mm square mouth `P' type complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC, PVC or reinforced cement) set in cement mortor internal dia of pipe 75mm to 100mm including removal off rubbish beyond MOD land complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps (confirm to sample) fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls complete all as specified and directed.

All as per item No 86 but 75mm bore PVC (SWR) pipe.

S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

Dismantling of cast iron drain pipes & fittings, jointed in cmenet mortor and taking out of trench required internal dia of pipe 75 to 100mm complete all as specified and directed.

S&F 100mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/ceiling or laid in vertical surfaces complete all as specified and directed.

S&F 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/ceiling or laid in vertical surfaces complete all as specified and directed.

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repairs 75mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

M&L preparetion of old decorated plastered surfaces of walls etc by complete removal of existing treatment incl washing rubbing down and stopping of surface and applying two coats of oil emulsion distemper on wall surfaces complete all as specified and directed.

M&L for preparation of old plastered surface and applying a coat of oil emulsion distemper, complete all as specified and directed. .

M&L preparation old plastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

M&L preparation of old decorated surfaces of walls (Plastered or unplastered) by brooming down scrapping down smoke soot moulds, moss and efflorescent salts etc and applying one coat of white wash on walls complete all as specified and directed.

M&L painting one coat of synthetic enamel paints on old wooden surfaces of girth exc 10cm, including preparation of surfaces. complete all as specified and directed.

M&L preparation of old steel and iron surface any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Disconnecting exsiting water tanks of capacity exc 250ltr and n exc 500ltr complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. with necessary chemical / bleaching powder, capacity upto 500 ltrs incl write colour paint on tank as CLEANED ON DD/MM/YEAR including refixing & fixed in position complete all as specified and directed.

S&F 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 20mm GI nipple suitable for HDPE water tank complete all as specified and directed.

S&F 20 mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directred.

S&F in repair ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed

S&F in repairs 20mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes complete all as specified and directed.

S&F in repair PVC water tank cover of capacity 500ltr complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 ( 20 mm graded stone aggre) as floors finishing surfaces even and smooth using extra cement complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level) including removal off rubbish beyond MOD land complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 (using 20mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra cement grooves filled with bitumen mastic laid in bays filling of mix (1:2) (bitumen and sand) complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 (40 mm graded stone agg) as in Sub base for floor complete all as specified and directed.

M&L for 50mm thick sand cushion/Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L 60mm thick coloured & reflective type cement concrete interlocking paver blocks hydraulically pressed of compressive strength not less than M-35 grade complete all as specified and as directed.

M&L for 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for Coloured Cement concrete Pre polished & reflective type chequered tiles 30cm X 30cm X 25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors and cut and pointed with white cement and pigment complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping bedding rounded or chamfered on edges including necessary form work complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 97992.50 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.

Chandramauli Engineers Pvt. Ltd.

Ess Dee Construction Co.

S GOURAV PRAKASH ENTERPRISES

M/S.M.S.Devi.Const.Co

Vipul Construction

GAUTAM ELECTRIC WORKS

Hira Singh and Sons

PRAHLAD NARAIN KOLI