Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.5 LAccepted-AOC | ₹17.5 L | L1 | Accepted-AOC AOC |
| 2 | L2₹18.0 LRejected-AOC BHOSE TAL MIRAJ DIST SANGLI | BHOSE | SANGLI | MAHARASHTRA | ₹18.0 L | L2 | Rejected-AOC AOC |
| 3 | L3₹18.1 LRejected-AOC | ₹18.1 L | L3 | Rejected-AOC AOC |
Tender Value
₹17.5 L
EMD Value
₹17,500
Closing Date
1 Dec 2025, 5:00 pmClosed
DISTRICT WATER CONSERVATION OFFICER
ZILLA PARISHAD SANGLI
Construction of Gated Cement Bandhara at Aswalewadi, Tal.- Shirala, Dist.- Sangli.
2025_SANGL_1250900_5
04/2025-26
Open Tender
Civil Works - Water Works
270 days
SANGLI
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
₹17,500
Yes
12 Feb 2026
24 Nov 2025
3 Dec 2025
24 Nov 2025
1 Dec 2025
24 Nov 2025
Item No. 1 - Excavation in all kinds of soil including boulders upto 0.6 m diameter ( 0.113 cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead upto 15m and all lift. as directed. ( As per R A ) a) For Foundation
Item No. 2 - Excavation in hard murum including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated material neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead upto 15m and all lift. as directed. . ( As per R A ) a) For Foundation
Item No.3- Excavation in soft rock without blasting including boulders upto 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead upto 15m and all lift. as directed. .( As per R A ) a) For Foundation
Item No.4 - Excavation in hard rock of all toughness by breaker including boulders above 0.6 m dia. (0.113Cum) minimising damage to side slopes of excavation and placing the excavated rock neatly in approved dump area as directed including cost of all materials, machinery, labour, levelling bed etc., complete with lead upto 15m and all lift. as directed. . ( As per R A ) a) For Foundation bed
Item No.5- Providing and laying in situ cement concrete of grade M-15 (40MSA) of trap / granite / gneiss / quartzite / graded metal for foundation and bedding with Concrete mixer including placing, compacting, curing with an initial lead of 1 km. and all lifts. etc. complete as directed. . ( As per R A )
Item No.6- Providing and laying in situ cement concrete of grade M-15 (40MSA) of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement/RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete mixer with shuttering and scaffolding, compacting, curing with an initial lead of 1 km. and all lifts. etc. complete as directed (Sub & Super Structure) (As Per Rate Analysis)
Item No.7-Providing and laying Tor reinforcement for various dia meter as per design and drawing including all leads and lifts for One Tonne. Including cutting Bending , hooking, Tying cost of binding wire etc Completed. (As Per Rate Analysis)
Item No.8- Providing and fixing Anchor bar of 25mm Dia. 3.375 m length with resin bond cement capsule anchorage including drilling holes, inserting grout capsule, driving anchor, cost of all materials, machinery, labour, ventilation, lighting, drainage and other ancillary operations etc complete with lead upto 1km and all lifts. (As Per Rate Analysis)
Item No.9 - Backfilling upto ground level behind canal structure etc. complete with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc complete as directed. (As Per Rate Analysis)
Item No. 10- Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75 cm as directed by Engineerin-Charge (As Per Rate Analysis)
Item No. 11- Straight Needle K.T. Weir Gate-Manufacturing- Manufacturing with QAP & fabrication of KT weir needle gates - straight type size 2.15 x 0.5M- 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177 (As Per Rate Analysis)
Item No.12-Providing, fabricating and fixing in position permanent structural steel supports through adit / itself as per details including cost of all materials, machinery, labour, cutting, bending, welding, grinding, lighting, ventilation, drainage and all other ancillary operations etc complete with all lifts (As Per Rate Analysis)
Material & cube tests Charges as per direction etc.Concrete cube test
Cement all tests
Fine aggregate test
Course aggregate test
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.81 MB
Tendernotice_2.pdf
PDF • 3.77 MB
Tendernotice_3.pdf
PDF • 0.22 MB
BOQ_2156816.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid