Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.4 LAccepted-AOC | ₹24.4 L Quoted ₹25.0 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹26.7 LRejected-Finance S 17 77 1 CHARAN NAGAR COLONY NADESAR VARANASI UTTAR PRADESH PIN 221002 | VARANASI | UTTAR PRADESH | 221002 | ₹26.7 L | L2 | Rejected-Finance Not Lowest |
| 3 | L3₹27.7 LRejected-Finance | ₹27.7 L | L3 | Rejected-Finance Not Lowest |
| 4 | L4₹29.4 LRejected-Finance | ₹29.4 L | L4 | Rejected-Finance Not Lowest |
| 5 | L5₹31.1 LRejected-Finance | ₹31.1 L | L5 | Rejected-Finance Not Lowest |
| Sl No | Description | Qty | Unit | M/S J J ENTERPRISES L4 | BHATNAGAR ASSOCIATES L3 | M/s ANUSHA ENTERPRISES L7 | SUN LIGHT HOUSE L1 | S.S.ENGINEERING CORPORATION L5 | Charan sales and Service L2 | Sai construction & services L6 | EXELLENT POWER CORPORATION L9 | M/S PAVANI ENTERPRISES L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Repair / maintenance of street / security/Garden lights any type, flood lights, post top lanterns or any other external lights in its position fixed on pole / high mast / building structure or by taking down to ground, if required, testing all the components / parts, wiring etc, identifying and replacing the defective components like, electronic driver (in case of LED lights), connector, connection wires/ cable, MCB etc including refixing the fitting to its original position (if taken down), including repair / maint of street light control timer & junction box all as directed by Engr-in-charge . Note: (i) The rate against the above mentioned item is deemed for cost of labour and allied expenses only.
(ii) Spares such as, electronic driver, connector, connection wire, MCB, timer spares etc) replaced against above mentioned item will be measured & paid for separately under respective items of BOQ here-in-below. | 300 | Each | 600 ₹1.8 L | 270 ₹81,000 | 120 ₹36,000 | 100 ₹30,000 | 150 ₹45,000 | 100 ₹30,000 | 150 ₹45,000 | 753 ₹2.3 L | 500 ₹1.5 L |
| 1.01(iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defective lights fittings and will submit the completion report as per complaints received on the same day before 1730hrs to the JE E/M. (iv) The contractor has to rectify the defects / repair and make the street light functional within 24 hours from the time the list of defective street lights is handed over to him / his rep by the concerned JE E/M. In case the street light is not made functional for whatsoever reason within the specified time limit, an amount of Rs 150/- per such defective street light per day will be recovered from the amount due to him through RAR / Final Bill. The contractor shall carry out repair / maint work simultaneously for different areas by engaging separate team of electricians / technicians for DLRL area in order to ensure prompt & timely rectification of defects.(v) Contractor shall arrange requisite and cost sufficient number of transport and vehicle mounted hydraulic ladder at his own cost wherever required.(vi) The contractor shall maintain proper record of repair / maintenance in a binded register duly bringing out the details of spares replaced on each and every street light and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maintenance record register to Engineer-in-charge for inspection on every Monday or as and when asked for.(vii) The contractor shall be fully responsible for the safety of his men engaged for executing this work and he will provide all requisite safety equipments and department shall not be responsible for any kind of mishap / accident / injury to his men. (viii) The contractor shall maintain sufficient stock of spares / material required for repair / maintenance of street lights with the concerned JE E/M against the supply only items here-in-below. | ||||||||||||
| 2.00 | PVC insulated copper conductor FRLS grade 2.5 sqmm,three core cable, ISI marked. | 300 | RM | 110 ₹33,000 | 180 ₹54,000 | 90 ₹27,000 | 60 ₹18,000 | 35 ₹10,500 | 60 ₹18,000 | 100 ₹30,000 | 165 ₹49,500 | 113 ₹33,900 |
| 3.00 | PVC insulated copper conductor FRLS grade 1.5 sqmm,three core cable, ISI marked. | 300 | RM | 100 ₹30,000 | 144 ₹43,200 | 60 ₹18,000 | 40 ₹12,000 | 25 ₹7,500 | 40 ₹12,000 | 60 ₹18,000 | 103 ₹30,900 | 74 ₹22,200 |
| 4.00 | Supplying and fixing 4 sqmm stranded 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular | 300 | RM | 120 ₹36,000 | 45 ₹13,500 | 20 ₹6,000 | 20 ₹6,000 | 25 ₹7,500 | 70 ₹21,000 | 37 ₹11,100 | 43 ₹12,900 | 74 ₹22,200 |
| 5.00 | Supplying and fixing 6 sqmm stranded 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular | 300 | RM | 150 ₹45,000 | 54 ₹16,200 | 30 ₹9,000 | 25 ₹7,500 | 30 ₹9,000 | 80 ₹24,000 | 43 ₹12,900 | 50 ₹15,000 | 95 ₹28,500 |
| 6.00 | Cutting/ trimming / punning tree branches overhanging or interfering or obstructing electrical pole or street lights in such a way that the clearance between Street light pole and tree branches should not be less than 3 mtrs around the Pole/Fitting complete all as directed.
(Note: Quoted rate is deemed to include necessary hydraulic ladder arrangement and tree cutting machine and tools required at site.) | 150 | Each Span | 50 ₹7,500 | 180 ₹27,000 | 100 ₹15,000 | 120 ₹18,000 | 50 ₹7,500 | 200 ₹30,000 | 100 ₹15,000 | 616 ₹92,400 | 95 ₹14,250 |
| 7.00 | M&L for scrapping down and removing of old deteriorated paint from steel tubular poles LT preparing surface for painting and applying black & yellow paint strips of 30 cms each upto 1.5 m above the PCC and applying one coat of red oxide and two coats of aluminium paint for the remaining height of pole including MS clamps, GI bracket, fittings etc and marking of pole No, 2m above the PCC muff, letter shall not be more than 6 cm height with 16 cm dia circle around the marked No. complete all as directed.
Note : Quoted rate is deemed to include removal of any type of boards, direction plates etc and refixing the same after painting | 100 | Each | 500 ₹50,000 | 630 ₹63,000 | 350 ₹35,000 | 300 ₹30,000 | 250 ₹25,000 | 300 ₹30,000 | 200 ₹20,000 | 3,696 ₹3.7 L | 550 ₹55,000 |
| 8.00 | S&F in repairs automatic timer switch distribution board, factory assembled in powder coated sheet steel enclosure, single Phase, suitable for 6KW load, comprising of 32 Amps, 3 Pole, MCB SPN, 40A power contactor and 230V digital timer switch for controlling street lights outdoor type, including angle iron base and stand for fixing the panel with suitable PCC foundation as per site requirement .
Make: Havells/ L&T/Legrand/Indo Asian or its equivalent | 3 | Each | 13,000 ₹39,000 | 20,700 ₹62,100 | 19,500 ₹58,500 | 18,000 ₹54,000 | 7,500 ₹22,500 | 7,000 ₹21,000 | 18,000 ₹54,000 | 8,897 ₹26,691 | 3,000 ₹9,000 |
| 9.00 | S&F in repairs automatic timer switch distribution board, factory assembled in powder coated sheet steel enclosure, suitable for 12KW load single phase comprising of 65 Amps SP MCB, 63A power contactor and 230V digital timer switch for controlling street lights, including angle iron base and stand for fixing the panel with suitable PCC foundation as per site requirement .
Make: Havells/ L&T/Legrand/Indo Asian or its equivalent
Note:- Rate quoted shall be inclusive of necessary excavation & earth work and PCC foundation. | 2 | Each | 13,000 ₹26,000 | 30,600 ₹61,200 | 28,000 ₹56,000 | 25,000 ₹50,000 | 10,500 ₹21,000 | 12,000 ₹24,000 | 30,000 ₹60,000 | 10,266 ₹20,532 | 4,500 ₹9,000 |
Updated dates
Tender Value
₹47.3 L
EMD Value
₹84,480
Closing Date
4 Feb 2026, 6:00 pmClosed
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
REPAIR/MAINTENANCE OF STREET LIGHTS, GARDEN LIGHTS, BOLLARD LIGHTS AND BLDG SECURITY LIGHTS AT DLRL AREA UNDER GE (I) RND KANCHANBAGH, HYDERABAD.
2026_MES_748199_1
8162
Open Tender
Electrical and Maintenance Works
180 days
HYDERABAD
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹84,480
Yes
30 Mar 2026
12 Jan 2026
6 Feb 2026
12 Jan 2026
4 Feb 2026
26 Jan 2026
13 Jan 2026 - 19 Jan 2026
Repair / maintenance of street / security/Garden lights any type, flood lights, post top lanterns or any other external lights in its position fixed on pole / high mast / building structure or by taking down to ground, if required, testing all the components / parts, wiring etc, identifying and replacing the defective components like, electronic driver (in case of LED lights), connector, connection wires/ cable, MCB etc including refixing the fitting to its original position (if taken down), including repair / maint of street light control timer & junction box all as directed by Engr-in-charge . Note: (i) The rate against the above mentioned item is deemed for cost of labour and allied expenses only. (ii) Spares such as, electronic driver, connector, connection wire, MCB, timer spares etc) replaced against above mentioned item will be measured & paid for separately under respective items of BOQ here-in-below.
(iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defective lights fittings and will submit the completion report as per complaints received on the same day before 1730hrs to the JE E/M. (iv) The contractor has to rectify the defects / repair and make the street light functional within 24 hours from the time the list of defective street lights is handed over to him / his rep by the concerned JE E/M. In case the street light is not made functional for whatsoever reason within the specified time limit, an amount of Rs 150/- per such defective street light per day will be recovered from the amount due to him through RAR / Final Bill. The contractor shall carry out repair / maint work simultaneously for different areas by engaging separate team of electricians / technicians for DLRL area in order to ensure prompt & timely rectification of defects.(v) Contractor shall arrange requisite and cost sufficient number of transport and vehicle mounted hydraulic ladder at his own cost wherever required.(vi) The contractor shall maintain proper record of repair / maintenance in a binded register duly bringing out the details of spares replaced on each and every street light and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maintenance record register to Engineer-in-charge for inspection on every Monday or as and when asked for.(vii) The contractor shall be fully responsible for the safety of his men engaged for executing this work and he will provide all requisite safety equipments and department shall not be responsible for any kind of mishap / accident / injury to his men. (viii) The contractor shall maintain sufficient stock of spares / material required for repair / maintenance of street lights with the concerned JE E/M against the supply only items here-in-below.
PVC insulated copper conductor FRLS grade 2.5 sqmm,three core cable, ISI marked.
PVC insulated copper conductor FRLS grade 1.5 sqmm,three core cable, ISI marked.
Supplying and fixing 4 sqmm stranded 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular
Supplying and fixing 6 sqmm stranded 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular
S&F in repairs automatic timer switch distribution board, factory assembled in powder coated sheet steel enclosure, single Phase, suitable for 6KW load, comprising of 32 Amps, 3 Pole, MCB SPN, 40A power contactor and 230V digital timer switch for controlling street lights outdoor type, including angle iron base and stand for fixing the panel with suitable PCC foundation as per site requirement . Make: Havells/ L&T/Legrand/Indo Asian or its equivalent
S&F in repairs automatic timer switch distribution board, factory assembled in powder coated sheet steel enclosure, suitable for 12KW load single phase comprising of 65 Amps SP MCB, 63A power contactor and 230V digital timer switch for controlling street lights, including angle iron base and stand for fixing the panel with suitable PCC foundation as per site requirement . Make: Havells/ L&T/Legrand/Indo Asian or its equivalent Note:- Rate quoted shall be inclusive of necessary excavation & earth work and PCC foundation.
S&F in repairs SMC junction boxes (weather proof) IP 66, on street light poles made out of thermoplastic of size not less than 195 mmx 135 mmx 90 mm size with connector for connecting incoming and outgoing of cable including provision of 01 No of MCB SP 06 Amps to control the pole light circuit and MS brackets made out of 32 x 4 mm flat for fixing the box on post complete with nuts, bolts and washers and suitable size of double compression cable glands for incoming, outgoing of cable Complete all as directed. Make:- Sintex/Hensel or as approved by the GE
S&F in repairs of LED 35 watt street light fitting made up of pressure die cast housing with toughened glass and individual LEDs with street optics and IP 66 protection, 6500K including fixed to pole/wall with necessary MS clamp & accessories complete all as directed. Make:-Havells/Bajaj/Philips/Crompton/FortuneArrt/Goldmedal or its equivalent
S&F in repairs LED street light 60 W secondary optics made in pressure die cast housing and heat shrink in aluminium extrusion and IP 66 protection, 5700K color temperature fixing to the bracket or street light pole with necessary nuts and bolts as required at site complete all as directed. Make:-Havells/Bajaj/Philips/Crompton/FortuneArrt/Goldmedal or its equivalent
S&F in repairs LED street light 90 W secondary optics made in pressure die cast housing and heat shrink in aluminium extrusion and IP 66 protection, 5700K color temperature fixing to the bracket or street light pole with necessary nuts and bolts as required at site complete all as directed. Make:-Havells/Bajaj/Philips/Crompton/FortuneArrt/Goldmedal or its equivalent
S&F in repairs LED street light 100 W secondary optics made in pressure die cast housing and heat shrink in aluminium extrusion and IP 66 protection, 5700K color temperature fixing to the bracket or street light pole with necessary nuts and bolts as required at site complete all as specified and directed. Make:-Havells/Bajaj/Philips/Crompton/FortuneArrt/Goldmedal or its equivalent
Supply & Fixing LED flood lights 60 watts230 V AC outdoor type with thermal management in multiple optics IP 66 Luminaire with aluminium die casting,toughened glass and unique lens system for enhanced illumination and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp including removal of existing & complete all as directed Make:-Havells/Bajaj/Philips/Crompton/FortuneArrt/Goldmedal or its equivalent
Supply & Fixing LED flood lights 80 watts230 V AC outdoor type with thermal management in multiple optics IP 66 Luminaire with aluminium die casting,toughened glass and unique lens system for enhanced illumination and equipped with IP66 protection with impact and corrosion resistant complete with driver and lamp including removal of existing & complete all as directed Make:-Havells/Bajaj/Philips/Crompton/FortuneArrt/Goldmedal or its equivalent
Supply & Fixing LED flood lights 100 watts230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and unique lens system for enhanced illumination and lamp including removal of existing & complete all as directed Make:-Havells/Bajaj/Philips/Crompton/FortuneArrt/Goldmedal or its equivalent
Supply & Fixing LED flood lights 210 watts230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection with impact and corrosion resistant complete with driver and unique lens system for enhanced illumination and lamp including removal of existing & complete all as directed Make:-Havells/Bajaj/Philips/Crompton/FortuneArrt/Goldmedal or its equivalent
S&F in repairs LED 80 watt highbay light fiitting made up of pressure die cast housing with toughened glass and individual LEDs with IP 66 protection, 5700K including fixing to High mast pole/truss with necessary nuts, bolts and washers complete all as directed. Make:-Havells/Bajaj/Philips/Crompton/FortuneArrt/Goldmedal or its equivalent
S&F in repairs Integral LED bollards 8 watt with opal acrylic diffuser made of extruded aluminium housing and IP65 protection including PCC foundation with suitable phospher bronze/GI nuts and bolts for fixing the bollard as per site requirement complete all as directed Note:- Rate quoted shall be inclusive of necessary excavation and concrete required. Make:-Havells/Bajaj/Philips/Crompton/FortuneArrt or its equivalent
Supply & Laying, jointing & testing of XLPE UG LT cables, insulated, PVC sheathed aluminium conductor multi stranded armoured heavy duty 1100 Volt grade laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs for the following cable sizes all as directed. Make:HAVELLS/UNIVERSAL/CCI/GLOSTER/KEI/POLYCAB/KEC INTERNATIONAL (RPG) or its equivalent
10 sqmm 4 core
16 sqmm 4 core
25 sqmm 3.5 core
35 sqmm 3.5 core
50 sqmm 3.5 core
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables and getting out in hard/dense soil complete all as directed.
Returning, filiing in, including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick each, using soil complete all as directed.
Removing excavated surplus soil obtained from excavation to a distance not exceeding 1.5 m above the starting point, complete all as specified.
M & L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed . NOTE:- Punned thickness shall only be measured and paid.
M & L Bricks common burnt clay building bricks, sub-class ‘A’ designation 75
Supply and laying in repairs corrugated HDPE pipe of 40mm dia for cable protection confirming IS-14930 1 & 2 , in trenches or fixing to the pole with necessary accessories complete all as directed. Make:Astral/Sudhakar or equalent ISI certified manufacturer.
S&F in repair light grade GI pipe bracket of 40/32mm dia, 1.2mtr long, bent to shape for street light fitting fixed on pole using new 2 Nos FI clamps, nuts, bolts and washers complete all as directed.
M& L for repair of highmast lights by taking down the light assembly by motor operation or mannually, taking out defective parts and fixing the highmast light in its original position after repairing all as directed by Engineer in charge Note : defective cabel, wire and lights will be measured and paid separately in relevant items of work.
Earthing with GI plate electrode 600x 600x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below normal ground level with top edge of earth plate, not less than 1.5 mtr below normal ground level connected to GI wire of size 4 mm by means of bolts, nuts/check nuts and washers etc of galvanised iron, protected by 15 mm dia galvanised iron pipe, light grade upto a length of 7.5 mtr away from earth electrode and connected to main switch/control board including necessary excavation earth work in any type of soil and PCC 1:3:6 type C1 for earth chamber, 40 mm thick RCC cover slab 1:2:4 type B1 with 8 mm dia TMT Bars at 140 mm c/c both ways,GI funnel, wire mesh, lugs, charcoal and salt etc complete all as shown in Electrical plate No. 3 of SI Part I and testing complete including removing unserviceable earthing material complete all as directed. Note : GI earth wire beyond 7.5 metres will be measured and paid separately.
S&F in repairs galvanised steel earth wire of 4mm dia on the over head LT pole with the help of aluminium tapes/ binding wire and necessary clamps for fixing the earth wire, providing the required sag for avoiding tension in earth wire complete all as directed.
S&F in repairs cable jointing kit for straight through joint (epoxy) for 1.1 KV grade suitable for 3.5 coreXLPE, PVC insulated and sheathed aluminium conductor under ground cable including thimbles, nuts & bolts, washers etc and testing after jointing complete, all as directed upto 50 sqmm size. Make: M-seal/Raychem/Transeal/Denson
S&F, in repairs stay assembly complete with accessories as shown in electrical plate No.1 of SI part I including loop type insulator, stay clamps, stay strands, excavation & earthwork and PCC work complete all as specified and directed. Note:- Rate quoted shall be inclusive of necessary excavation & earthwork and concrete as required.
M&L for painting the pole number on the LT/Street Light pole in circular shape with black synthetic enamel paint background and white synthetic enamel painted letters. Note:- The numbers and words shall be all as directed by the Engineer-in-charge.
S&F Electronic driver for 45/60 watts LED road way/Flood light/post top/High Bay. Make : Is certified
S&F Electronic driver for 90/100/120 watts LED road way/Flood light/post top/High Bay. Make : Is certified
S&F Electronic driver suitable for 150 watts LED road way/Flood light/post top/High Bay Make : Is certified
Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted)
S&F in repairs post top lantern LED type 15 watt 230 watts volts AC outdoor type with decorative post top for 360 degree indirect light IP65 protection with impact and corrosion resistant complete with driver and lamp along with necessary wiring,acceSIoies complete all as directed. Make : HAVELLS Cat part: RUBYMINT15WLED830PSYMTOPC or equivalent in Philips/Wipro
Supply and lay GI tubing 40 mm dia, light grade for cable protection at road crossing/on poles and tubing sealed at bith ends after laying the cables including taking out old GI tubing complete all as directed.
S&F LED strip plate for repair of 25/35 watts LED security light fittings Make : Is certified
S&F LED strip plate for repair 45/50/60 watts LED road way/Flood light/post top Make : Is certified
S&F LED strip plate for repair 90/100 watts LED road way/Flood light/post top Make : Is certified
S&F LED strip plate for repair 120/150 watts LED street light/Flood light fittings. Make : Is certified
S&F in repairs LED rope strip 230 watts volts AC outdoor type with decorative type light IP65 protection with impact and corrosion resistant complete with driver and lamp along with necessary wiring,acceSIoies complete all as directed. Make : HAVELLS Cat part: RUBYMINT15WLED830PSYMTOPC or equivalent in Philips/Wipro
Supply & Fix in replacement recess mounted LED luminaire 36W 2'x2' , 5700K CCT, luminous efficacy of not less than 120lm/watt designed for metric false ceiling type or alongwith frame suitable for Grid/POP ceiling or similar mounting system with concealed or exposed 'T' sections, Glare free light alongwith electronic driver complete with all accessories prewired and connecting up with three core twister flexible copper conductor cable with suitable size including making good to the disturbed portion of ceiling complete removing unserviceable wires/cables incluidng taking down of exisitng fixture all as specified and directed. Make: Havells/Crompton/Polycab/wipro/FortuneArrt or its equivalent
S&F in replacment indoor industrial type recess mounted LED Surface mounted for POP/Grid ceiling round/square downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency.15W, 6500K CCT, integral elctronic driver complete fixing with all accessories prewired and including connecting up with three core flexible copper conductor cable as required at site with suitable size complete removing unserviceable wires/cables incluidng taking down of exisitng fixture all as specified and directed. Make: Havells/Crompton/Polycab/wipro/FortuneArrt or its equivalent
S&F in replacment industrial type tripod mounted LED Search light for watch/security tower of rating not less than 350 W die-cast heat sink having high efficiency. complete fixing with all accessories prewired and including copper conductor cable as required at site with suitable size complete all as specified and directed. Make: Havells/Crompton/Polycab/wipro/FortuneArrt or its equivalent
Please Enable Macros to View BoQ information
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.57 MB
Tenderdocument.pdf
Tender Documents • 1.23 MB
BOQ_837882.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid