Construction of Weight Lifting (Sports) Training Centre at Mini Play Ground near Weekly Market at PARAMAKUDI in Ramanathapuram District

Amount

1.1) Earth work excavation for foundation in all soils (including refilling) a. 0 to 2 mt.

13.1) Filling with excavated earth

24) Manufacturing & supply of steel windows (weight basis)

30) Finishing the top of flooring with cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

37.1) White washing 3 coats (slaked)

39) Supplying and fixing of MS Grills in position

41) Painting 2 coats - New "iron work"

46) Supplying and fixing of 20 mm dia Alu. Hanger Rod

47) Supplying and fixing of Alu. Towel rail 75 cm long

48) Supplying and fixing of 5 pin Coat stand

52) Supplying, laying, fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 including the cost of suitable PVC/GI/GM specials b. 25 mm dia

Electrical arrangements 69) Supplying and fixing of 15 Amps 3 pin Power plug socket

72) Supplying and fixing of Box type Fibre Fan hook

74) Charges for assembling and fixing of ceiling "Fan"

77.3) Supplying and fixing of TV/Telephone line Socket

77.4) Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line

86) Providing Pre-constructional Anti termite treatment

Annexure 2.1.1) Supplying and filling the Foundation and basement with gravel

2.1.3) Supplying and filling in foundation and basement with Crushed stone sand

2.2.1) Sand Gravel mix with Crushed stone sand

3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

4.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Foundation and basement

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture

8.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Ground Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture a. In Ground Floor

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture b. In Ground Floor

11.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") 70 mm tk using crushed stone sand with Admixture (B.P.) a. In Ground Floor

14.2.3) Precast Cupboard slab 40mm tk in standardised concrete mix M20 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 40mm thick a. In Foundation & Basement

15.1.1) Cuddapah Slab 20mm tk. for cupboard slab / Similar works a. In Ground Floor

15.2.1) Cuddapah Slab 40mm tk. for cupboard slab / Similar works a. In Ground Floor

18.1) Formwork using M.S.Sheet a. For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c. For Square and rectangular columns and small quantities

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

22.3.3) Cup board/ward robes double leaf shutters using 9mm thick phenol bonded BWR grade plywood, TW frames, styles & rails including two coat enamel paint over one coat primer with brass screws

26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

34.1) Plastering in C.M. 1:4, 12 mm tk. using crushed stone sand with Admixture

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

36.1) Plastering for Border in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture a. 150 mm wide Border

b. 75 mm wide Border

c. 50 mm wide Border

38.4.1) Painting the new walls with Two coat of Oil Bound Distemper over the primer coat of white cement

38.6) Primer coat using one coat of white cement over the cement plastered/ concrete new wall surfaces or other similar works

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M20 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand with Admixture a) Providing pit

b) Augering 30cm dia

44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe

51.1) Supplying and fixing of HDPE water tank 700 lit capacity with ISI mark

52.4) Supplying laying fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 threaded PVC water supply ASTM pipe (fully consealed in walls) with necessary PVC/GI/GM specials c. 20mm dia

53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")

54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)

54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia

59.5.2) Supplying and fixing of Gully Trap using crushed stone sand

60.1) Supplying and fixing of PVC Nahani trap (4way/2way)

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

62.1.1) Supplying and fixing of PVC Bend fabricated 6 KSC as per IS 10124/1982 Part II a) 110mm dia PVC Bend

64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose with bakelite battern holder

65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan Point

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Switch Board Itself

68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

77.5) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 in fully concealed

101) Supplying and fixing of 25 watts LED with street light fittings

102) Supplying and fixing of 4'18 watts crystal LED tube light fittings

103) Supplying and fixing of Bulk Head fitting

113) Supplying and Erecting Pull and Push Type Rolling Shutters with ISI Monogram manually operated (Upto 8 Sqm. Area)

119) Supplying and delivery of 2 HP clear water vertical wet type three phase submersible pumpset suitable for borewell Duty - 50 lpm x 60 m

120) Labour charges for erection of submersible pumpset in borewell / openwell upto 5 HP

121.1) Supplying and fixing of 3 Phase control Panel Board including labour charges

122) Supplying and fixing of following dia of the GI & GM specials a) 32mm dia GI Elbow

b) 32mm dia GI Union

c) 32 mm dia GI Hex Nipple

d) 32mm dia GM Gate valve

123) Supplying and Delivery of PVC insulated and sheathed 3 core 4 sq.mm flat type copper cable for submersible pumpset

124) Supplying and laying of following dia GI pipes 'B' class in position a) 25mm dia GI pipe

125) Supplying and delivery of following dia UPVC pipe a) 32mm dia UPVC pipe

125.1) Labour charges for laying of following dia UPVC pipe a) 32mm dia UPVC pipe

126.1) Supplying and fixing of following dia M.S. Clamp set a) 40 mm dia MS clamp set

127) Supplying and delivery of required dia Nylon rope for tieing of submersible motor pump

132.1) Charges for developing the Borewell with Air compressor of 300 CFM capacity (Minimum 8 Hrs)

132.2) Drilling of borewells any where in Tamilnadu including Transporation from one place to another within Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebble boulders etc., by first taking a pilot bore 140mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling Bentonite and water required for drilling at site a) Upto 60m depth ending below Ground Level

b) From 60m depth upto 90m depth ending below ground level

132.3) Reaming of 140/150 mm dia pilot bore to 300mm dia bore a) Upto 60m depth ending below ground level

b) From 60m depth and upto 90m depth ending below ground level

133) Supplying and delivery of following dia PVC casing pipes suitable for 150mm dia borewell a) 150mm dia PVC Casing Pipe (Casing Shallow Depth) upto 80m

b) 150mm dia PVC Casing Pipe (Casing Medium depth) (upto 81 to 110m)

133.1) Labour charges for inserting 150mm dia PVC casing pipe assembly (with slots or without slots) in the drilled hole including jointing the Pipes with PVC couplers with cement paste etc., complete

134) Supplying and fixing of 160mm dia PVC end cap for borewell

344.2) Supplying and fixing of Bevelled Edge Mirror of size 500x400x5.5mm

378.4) Supplying and fixing of Rubber tiles over cement flooring and other similar works

448.2) Supplying and fixing of PVC Tee with end cap of 32mm dia

796) Two coat of Plastic emulsion paint including primer for outer wall

G Manoharan