SPECIAL REPAIR TO CERTAIN ROOMS OF SU AT 4 WG UNDER GE AF TECH AREA AGRA

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards any type thickness and in any position including cover fillets complete all as specified and as directed.

S&F frame work for seamless ceiling comprising of powder coated GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm center to center/ intermediate channel 0.9mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm center to center with GI cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lip of 10.5 mm fixed to the intermediate channel at 457 mm center to center with Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedcomplete all as per manufacturer's instructions and as directed by EIC.

S&F HPSC pre prime non asbestos fiber cement building board 4mm thick size 595x595mm with decorative finish fixed to GI powder coated snap grid frame work with screw in ceiling complete all as specified and directed.

M&L for solid PVC wall lining consisting of 5.00mm thick single side prelaminated PVC sheet inclusive of insolvent cement and fixing at site on PVC frame complete all as specified and as directed . Note:-incl Taking down of existing switch board/tube light etc and fixing the same.

Taking down chowkhat with shutter area n.exc 1.5 sqm each (without taking off shutters from the frame) including making good of jambs/ holdfast with cement mortar 1:4 plaster complete all as specified and as directed.

Taking down chowkhat with shutter area exc 1.5 Sqm but n.exc 4 sqm each (without taking off shutters from the frame) including making good of jambs/ holdfast with cement mortar 1:4 plaster complete all as specified and as directed.

M&L for Providing and fixing of Sliding Window/ventilator System fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/ Sq. Mtr.) with total coated thickness of 0.58 mm or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Section for three track external frame should be of 44 x 107mm , Section for window glass shutter should be of 35 x 49 mm, Section for shutter horizontal mullion should be 22mm x 60mm, Section for window euro groove should be 25 x 24mm(Aluminum/Plastic)and Section for window Lap Strip should be of 21 x 4mm(Aluminum).Section for door glass shutter should be of 35 x 67 mm Section for door euro groove should be 25 x 31mm(Aluminum/Plastic)and section for door Lap Strip should be of 39 x 41mm(Aluminum/Plastic).The windows/doors should be paneled with 5mm thick Plain Float glass. Gaskets are to be made with Ethyl Propylene Diamine Manomer (EPDM).Corner brackets for internal and external frame made of Polypropylene. Touch lock to be provided for window shutter .Sections are to be cut to length, joined and assembled by means of corner brackets. The above Frame should be fixed to brick/ concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames. Grill for safety to be made with 25mm x 4mm thick MS flat all around and 10mm x 10mm MS square rod to be used for horizontals with spacing not more than 150mm and 10mm x 10mm MS square rod to be used for verticals with spacing not more than 350mm.The grill be fixed wall to wall after fixing the window. NOTE: (i) Glazed shutter with 5.50 mm thick glass, mesh shutter with 32 gauge stainless mesh and MS grill as per above mentioned drawing is deemed to be inclusive in the rate quoted for unit. (ii) Glass, stainless teel mesh will be fixed to window by authorised rep of manufacturer of window only. (iii) making good of jambs in CM (1:4) and OBD with putty complete.

Supply and fixing factory made uPVC white colour Casement door with frame with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series)frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate imension.comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 125 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. Note: (i) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (ii) Glazed shutter with 5.50 mm thick glass, mesh shutter with 32 gauge stainless mesh and MS grill as per above mentioned drawing is deemed to be inclusive in the rate quoted for unit.

S&F 2nd class hardwood door, 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number, edges of framing plain chemferred or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) complete all as specified and as directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples at height upto 15.0 mtr complete all as specified and as directed.