SPECIAL REPAIR TO TYPE II QUARTERS BLOCK NO P14 AT CQA EE RESIDENTIAL COMPLEX AUNDH CAMP UNDER GE MH AND RH KHADKI

Amount

Removing of old water proofing treatment and cleaning the surface of slab and cleaning with wire brush, removing dust, foreign materials and removing the rubbish off the site to a distance n.exc 100m complete all as directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate) on roof top for maintaining of slope coving, benching etc complete all as specified and directed.

Rendering 10 mm thick on concrete surfaces of roof in cement plaster in 1:3 CM mixed with WPC @ 3% by weight of cement finishing even and smooth to receive water proofing treatment complete without using extra cement all as specified and directed by Engr-in-Charge. Note : WPC shall be measured and paid seperately.

M&L for cleaning the plaster /concrete surfaces with wire brushes and applying water proofing treatment, one coat of bituminious primer @ 0.25 kg per sqm and providing 3 mm APP modified water proofing membrane weight 3.5 to 4.0 kg /sqm by torch application method including painting entire roof surfaces with one coats of bitumastic aluminous paint

Taking up or down steel tubing 20 mm dia and connection including cleaning for refixing for following bore of pipe, complete all as specified

Taking up or down steel tubing 15 mm dia and connection including cleaning for refixing and removing to store for following bore of pipe, complete all as specified

M&L for tube medium grade 20 mm dia, galvanized with all fittings fixed complete to wall, ceiling or laid in floors etc. for following dia of pipe, complete all as specified

Refixing old steel tubing and connection of 20 mm diain new or old position (walls, ceiling ,floor etc

M&L for tube medium grade 15 mm dia, galvanized with all fittings fixed complete to wall, ceiling or laid in floors etc. for following dia of pipe, complete all as specified

Re-fixing old steel tubing and connection of 15 mm drain new or old position (walls, ceiling, floor etc)

S&F in repairs, gun metal globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipes

Dismantling water tank of any description or capacity 500 ltrs complete all as specified as directed.

S&F rotational moulded polyethylene water storage tanks (cylindercal veritcal with closed top) hoisted and fixed inposition 500 ltrs capacity complete all as specified

S&F in repairs ball brass valve 20 mm dia high pressure with poly-thine float and fly nut for following bore of pipe, complete all as specified

Taking down chowkats and frame n.exc 1.5 Sqm including shutter without taking off shutters from frame complete all as directed by Engr-in-Charge

Taking down chowkats and frame exc 1.5 Sqm and n.exc 4.0 sqm incl shutter with out taking off shutters from frame and removing from site complete all as specified and directed by Engr-in-Charge

Taking down wooden shutters exc 1 sqm and n exc 2 sqm each

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F powder coated anodised aluminium window and ventilator shutters, slinding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified

S&F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

Supply only 5.50mm thick sheet glass, ordinary quality in square n exc 0.5 sq.m in each pane

Supply only 5mm thick sheet glass, obscured or frosted square in exc 0.5 sqm in each pane

S&F pressed steel door frame for doors with one or more rebate incl necessary fixing lugs, hinges lock strike plate, etc complete as specified size 105 x 60mm

S&F pressed steel door frame for doors with one or more rebate incl necessary fixing lugs, hinges lock strike plate, etc complete as specified size 125 x 60mm

S&F in repairs 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with only one face has decorative veneer; fixed with screws to timber frame work complete all as specified and directed by Engr-in-Charge

M&L in repairs second class hard-wood clean sawn timber framed and fixed in scantlings all as specified

M&L for flush shutters 35mm thick solid core constructions with block board core, plywood face panels commercial type on both side as specified

S&F 30 mm thick 2nd class H.W glazed or skeleton shutter open rebated divided intosquare with plain chamfered or rounded mitred and rebated with out sash bar andprepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR Pt-1.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing

S&F factory made solid PVC moulded door shutters 28 to 30 mm thick (stile:), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F stainless steel wire cloath 0.56 mm nominal dia of wire and average width of aperature 1.18mm including fixing with wooden / steel batten complete all as specified & directed by Engr-in-Charge

M & L for Aluminium alloy barrel tower bolts of stove enamelled blackwith bright bolt and fixed 150mm long complete all as specified and directed.

S&F butt hinges medium weight colled rolled mild steel 100 mm and fixed complete all as specified & directed by Engr-in-Charge

S&F Aluminium alloy sliding door bolt 300 mm long, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and incld mild steel min of 6 bolts and nuts, 4 on bolt plate and 2 on stapleplate fixed/welded to door shutter/frame complete all as specified

M&L for Aluminium alloy pressed oval type handles stove enamelled black for doors 150 mm long complete all as specified and directed by Engr-in-charge.

Taking down cement plaster in any description including racking out joints hacking for key and scrubbing down with water etc. specified and directed by Engr-in-Charge

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises as directed

M&L for rendering 10mm thick, on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished even surface complete all as specified and directed by Engr-in-Charge

M&L for rendering 10mm thick, on fair faces of brick work or concrete surfaces of ceiling in CM 1:4 with finished even surface complete all as specified and directed by Engr-in-Charge

M&L for rendering 15mm thick, on fair faces on stone masonry surfaces or surfaces walls in CM 1:4 including WPC complete all as specified and directed by Engr-in-Charge

Supply only water proofing compound

Providing and carry out water proofing treatment to toilets, sunken floors slabs, wet areas etc, after proper surface preparation, carry out cementitious injection grouting at leakage points using cobex 100 plasticised expansive grount admixture, application of polymer modified vatta at slab and wall junction using nitobond SBR latex- screed modifier cum bonding agent and application of two coats of brush bond RFX - two- Part acrylic polymer modified cementtious elastometic water proof and protective coating etc, complete including all tools and tackles as per manufactures specification.

M&L for PCC 1:4:8 type D2 (uisng 40mm graded aggregate) as in filling, mass concrete, for sunkun floor.

M&L Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over cement screed 15mm thick in CM 1:6 complete all as specified

M&L coloured Non Skid ceramic tiles 300x300x7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over cement screed 15mm thick in CM 1:6 complete all as specified

M&L coloured glazed ceramic tiles in vertical surface of size 300mm x 450mm x 6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over cement plaster 10mm thick in CM 1:4 complete all as specified

M&L Machine cut KOTA stone slab flooring 20-25 mm thick laid and jointed inneat cement slurry mixed with pigment to match the shade including cutting and polishing over and including 15 mm thick screed bed in CM 1:6

All as per item No 48 above but in riser, step, skriting, dados and pillar over 10 mm thick plastering in cement morter 1:4 all as specified.

M&L Granite slab 20 mm thick machine cut bedded and jointed with grey cement and pointed with white cement and adhesive of pigment to match theshade incl cutting and polishing laid over cement screed 10mm thick in CM 1:4 complete all as specified as directed by Engr-in-Charge

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M&L as in repairs kitchen sink with drainage board made of stainless steel 1mm thick with plugs washers and wastes incl bedding in CM to drawf wall inclfitting cantilever brackets andconnecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm

S&F steel plate rack of 90cm x 75cm x 20cm as specified and directed.

S&F 20mm dia CP curtain rod all as specified and directed

S&F bracket of fancy type curtain rod powder coated 20mm dia including fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) all as directed by Engr-in-Charge

S&F in repairs aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges

S&F in repairs stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15 mm dia complete all as specified and directed.

S&F in repairs bib taps CP brass with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm dia complete all as specified and directed by Engr-in-Charge.

S&F brass CP shower rose 125mm size with swivel joint including fixing to steel pipe fixed in repairs as directed

M&L for PCC 1:3:6 type C1 (uisng 20mm graded aggregate) 75 mm thick as in plinth, path, floor with fair finish surface with out using extra cement complete all as specified

S & F in repairs viterious china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but including necessary brackets CP wastes and other fittings complete all as specified and directed by Engr-in-Charge.

S&F in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipes 15mm dia all as specified and directed

S&F in repairs water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor.

S&F in repairs PVC high/low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets all as specified and directed by Engr-in-Charge.

M&L PCC 1:2:4 type B-0 using 12.50mm graded agg as in coping hold fast block bed bolck filling pressed steel door frame etc all as specified.

M&L painting to wooden surfaces of any description over 10 cm width or girth including prepration of new or untreated surface and applying two coat of synthetic enamel paint over one coat of pink primer all as specified

M&L for preperation of new or old surfaces and finishing walls with Acrylic Smooth exterior paint of required shade : New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper of approved colour and pattern over a coat of primer over 3mm thick wall care putty finished even and smooth complete all as specified.

M&L complete removal of existing treatment & applying two coats of oil bound distemper of approved colour and pattern over a coat of primer over 3mm thick wall care putty finished even and smooth.

Preparation of new plastered surfaces on ceiling and applying three coats of white wash over 3mm thick wall care putty finished even and smooth complete all as specified.

M&L for complete removal of existing treatment on ceiling & applying applying three coats of white wash over 3mm thick wall care putty finished even and smooth complete all as specified.

Demolition of stone/brick /PCC block masonry built in cement mortar or cement lime mortar.

M&L for pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified

Taking down drain pipes (any size or pattern), including all fittings, T, bends,etc., including cleaning or refixing (measured overall as fixed along the centre line over fitting and accessories)

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

All as per item No 76 above but refixing only

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

All as per item No 78 above but refixing only

S&F 110mm dai PVC (SWR) bends any radius

S&F 75mm dai PVC (SWR) bends any radius

S&F 110mm dia PVC (SWR), junction single, (single T) equal or unequal

All as per item No 82 above but refixing only

S&F 75mm dia PVC (SWR), junction single, (single T) equal or unequal

All as per item No 84 above but refixing only

Fair circular cutting exc 10cm width or girth on exposed surfaces of brickwork as to fire place apertures, splayed angles, weathering, cornices, groins, etc. including rubbed finish and waste.

Grating doom 100mm dia of PTMT (minimum weight 25gms) with hole / without hole complete all as specified and directed

M&L for PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through non metallic rigid PVC conduit and accessories concealed in walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mm thick pressed steel terminal boxes to provision of modular switches to house switch/regulators etc including modular plate and covers for one fan/light /bell point controlled by one switch/bell push complete all as specified and directed.

All as per item No 91 above for one 3 pin 5 Amps socket on same board controlled with other switches on same board

All as per item No 91 above for one 3 pin 5 Amps socket on independent board

All as per item No 91 above but for for one light point controlled by two way switch complete all as specified and directed.

All as per item No 91 here-in-before but wiring with 2.5 sqmm single core multi stranded copper conductor,FRLS 1100 V grade PVC insulated but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm cable as earthwire complete all as specified and directed.

All as per item No 91 here-in-before but wiring with 4 sqmm single core multi stranded copper conductor 1100 V ,FRLS grade PVC insulated but unsheathed single core for 16/20 Amps power point on independent board and 4 sqmm cable as earthwire complete all as specified and directed.

Supply and fix modular switch 1 way 6A, 1 module complete all as specified and directed.

Supply and fix modular switch 2 way 6A, 1 module complete all as specified and directed.

Supply and fix modular bell push 6A, 1 module complete all as specified and directed.

Supply and fix modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix modular socket 16A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix modular switch 1way 16A, 1 module complete all as specified and directed.

Supply and fix Modular fan regulator complete all as specified and directed.

Supply and fix electric bell Ding Dong, AC 230 volts complete all as specified and directed.

Supply and fix ceiling rose surface bakelite with three terminals complete all as specified and directed.

Supply & fix in repairs high efficent LED Bldg security, 35 Watt 230 Volts, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 / 66 protection complete. including connecting with 1.5 sq mm copper condector 3 core flexible cable from fitting connector to ceiling rose and fix on wall with clamps & nut bolts and necessary GI bracket made of 32 mm light grade GI pipe of 1 mtr length with necessary bending complete all as specified and directed . Note : The rates are inclusive of GI brackets of lenght upto 1mtrs and MS clamps of size 25x3mm.

Supply and fixing in replacement LED lights fitting 1x 22 W, 220V,AC, decorative box type with driver, holder including LED tybe light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Taking down old unserviceable tube light fitting of any type and S & F wall/ceiling mounted LED tube light fitting aluminium body , Energy efficient high quality invertor batten having Lithium ion battery of 3.7V, 19 WH for backup upto 2Hrs with high power brightness having BIS certification, LED fitting should be LM 80 certified with system efficacy greater than 100 lumens/watt, including LED tube 20/22 watt having colour temperature 6500 K (4 feets long) , PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, having input voltage range 90V to 300V connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : Jaquar/Halonix/Philips . Note : The rates are inclusive of cost of ceiling rose -01 Nos and square box-02 Nos including suitable size of clamps and screws etc.

Supply and fixing LED Light fitting mirror type with high output diffuser 2 feet , 1 X 10 watt 220 V AC decorative type with driver holder and LED lamp, alluminium housing, including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Taking down old unserviceable wall bracket light fitting of any type & S & F wall mounted high quality indoor wall bracket light cylinderical/oval shape aesthetically designed fitting in wooden housing, glass and B22/E27 holder complete including inverter LED bulb B-22 cap with opal diffuser, IP-20 and inbuilt battery backup (LED INVERTER LIGHT 10W B22 CW IP) 10 watts including necessary eletric connection with PVC insulated multistranded copper cable of size 1.5 sqmm 3 core from ceiling rose to fitting terminal complete all as specified and directed.

Taking down unserviceable submain wiring and M&L for submain wiring in PVC conduit with two runs of 6 sq mm and one runs of 6 sqmm for earth continuity 1100 v grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistranded ISI marked (IS 694) drawn through and including 25 mm dia PVC rigid connduit heavy grade ISI marked (IS 9537 Part III) includung accessories such as bends, supports etc all as specified and directed. Note: Two runs of 6 sq mm and one runs of 6 sqmm cable along with conduit shall be measured as one length.

S & F sheet metal enclosures in repair double door distribution board factory made duly painted 12 way SPN and neutral 240 v with 200 amps rated copper bus bar , concealed in wall suitable for fixing MCB /Isolators all as specified and directed.

S & F MCB SP of capacity 6A - 32A 'B' curve all as specified and directed.

S&F MCB, SPN (Double Pole), 32 amps, 240 Volts, 10 KA ‘C' curve complete all as specified and directed.

M & L for earthing complete in repairs with galvansihed steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board and all as directed. Note: Rate for achieving required depth by compressor machine if required is deemed included in item unit rate.

M & L for taking down exhaust fan steel body 300 mm sweep, celing cable end, dismantling blades and removing fan and blades to store painting of exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc after complete repairing of builidng, fixing exhaust fan on existing position complete all as specified and directed (for Kitchen)

M & L for taking down ceiling fan, celing cable end, dismantling blades and removing fan and blades to store painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc after complete repairing of builidng hanging ceiling fan on existing position all as specified and directed.

M & L for Fan hook , clamps holdfasts with all necessary materials for hanging fan all as specified and directed.

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with 20 Amp DP MCB all as specified and directed

Taking down the existing serviceable kwh meter from site without any damage cleaning it properly and refixing the same in the new panel as directed by Engr-in-charge of the each block after completion of work all as specified and directed.

i) Incomer

a) MCCB four pole of capacity 63 Amps , 415 volts AC , 16 KA rapturing capacity Ics= 100% of Icu thermal magnetic setting including connection with bus bar - 01 Nos (as incomer)

ii) Out going

a) MCB SPN 32 Amp 10 KA 'B' curve, 240 volts AC -4 Nos (out going) (for each Qtr)

b) MCB SPN 10 Amp 10 KA 'B' curve 240 volts AC -02 Nos (out going) (for stair case light and Bldg/S/Light)

e) LED type RYB phase indicator lamp with back up HRC fuse - 01 Set

f) Suitable space and fixing arrangements for fixing 4 No's single phase energy meter dismantled from the 04 x Qtrs of the block.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed.

All as per item No 123 but in hard/dense soil.

Removing excavated material soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed.

M & L for riddled earth for cushioning to under ground electric cable including spreading , levelling and hand punning complete all as directed. Note - Punned thickness shall only be measured & paid.

M& L for road cuttung / foot path and making good with PCC 1:3:6 TYPE C-2 (using 40 mm graded stone aggregate) of 150 mm.

Supply and laying un-reinforced precast concrete cable cover LV, Type I, flat, size 250mm x 150mm x 40mm for under ground cable complete all as specified and directed.

Supply and laying GI tubes light grade, galvanized, 40 mm bore in repair, laid in trenches or under floor or fixed with poles/walls for protection of electric cable complete all as directed

Sunrise Traders

V.R.PRAJAPATI AND CO.

M/S JAYCONSTRUCTION CO

M/S SANDEEP CONSTRUCTION COMPANY

S.R.M.K Enterprises

MAHESH DADAJI BACHHAV