Construction of Community Hall near Baba Kailakh Nath Mandir in W.No 63

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Extra for half Brick masonry in superstructure above plinth level upto floor V level.

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms

Edges of slabs and breaks in floors and walls Under 20 cm wide

12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and fixing of Alumininium Door, Windows and vintilaters panelled and glazed including Handle bar, Brass Lock etc and the allied items Complete job.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fitting of Electric Points Complete Job as per the direction of Engineer Incharge.

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade

Providing and fixing wash basin with C.I bracket, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- white vitreous China wash basin size 550x400 mm with a 15 mm CP brass single hole basin mixer

Providing and fixing white vitreous China pedestal type Water closet (European type) with seat and lid,10 ltr low level white vitreous China flushing cistern and CP flush bend with fitting and CI bracket, 40mm flush make bend, overflow arrangement with special of standard make and mosquito proof coupling of of approved Municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. Pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with P.V.C automatic flushing cistern,withfittings. Standard size C.P .brass flush pipe,spreaders with unions and clamps (all in C.P brass) with waste fittings as per IS: 2556,C.I trap with outlet grating and other couplings in C.P brass ,including painting of fittings and cutting and making good the walls and floors wherever required. Single half stall urinal with 5 liter P.V.C automatic flushing cistern.

Providing of fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete : flexible pipe 40 mm dia

Providing and fixing PTMT grating of approved quality and colour.25 mm nominal dia with 25mm waste hole

Providing and fixing PTMT shelf 440mm long ,124 mm width and 36 mm height of approved quality and colour ,weighing not less than 300 gms.

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with ½ BSP thread and shapes, weighing not less than 60 gms

providing and fixing of PTMT Towel rail complete with barckets fixed to wooden cleats with CP brass screws with consealed fitting arrangement of approved quality and colour 450mm long towel rail with total lengh of 495mm,78mm wide and effective hieght of 88mm,weighing not less than 170gm.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,200 mm wide with a minimum

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: internal wall -exposed on wall20 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: internal wall -exposed on wall 15 mm dia. nominal bore

providind and fixing PVC pipe 110 mm as per the direction of Engineer - in - charge Complete Job

Providing and fixing PTMT urinal cock of approved quality and colour: 15 mm nominal bore,80 mm long ,42 mm high and 30 mm wide with BSP female threads weighing not less than 48 gms.

providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to ISI standards and weighing not less than 810 gms.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing PTMT stop cock of approved quality and color 15 mm nominal bore, 86 mm long, weighing not less than 88 gms.

Providing and fixing of Inaguration Plate of size 3'-0 x2'-6 of Granite Marble stone of Black colour with carving letters (Complete Job)

Providing and fixing PVC connection pipe including PTMT nuts 15mm nominal bore and 45cm lenth

Carriage of material Sand and aggregate 20mm by MT avg.10KM

Carriage of Bricks by MT avg. 15KM

Provision for design, Drawing and consultancy charge complete job.

Bhag Ali Choudhary

Surinder Gupta

ASHWANI KUMAR